usb: ldusb: ld_usb semaphore to mutex

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Acked-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: ISP1760 HCD driver

This driver has been written from scratch and supports the ISP1760. ISP1761
might (should) work as well but the OTG isn't supported. Also ISO packets are
not. However, it works on my little PowerPC board.

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: fw-sbp2: log scsi_target ID at release
  ieee1394: fix NULL pointer dereference in sysfs access

Merge git://git./linux/kernel/git/sam/kbuild-linus

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-linus:
  kbuild: fix vmlinux.o link
  kconfig: made check-lxdialog more portable

Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6:
  [MTD][NOR] Add physical address to point() method
  [JFFS2] Track parent inode for directories (for NFS export)
  [JFFS2] Invert last argument of jffs2_gc_fetch_inode(), make it boolean.
  [JFFS2] Quiet lockdep false positive.
  [JFFS2] Clean up jffs2_alloc_inode() and jffs2_i_init_once()
  [MTD] Delete long-unused jedec.h header file.
  [MTD] [NAND] at91_nand: use at91_nand_{en,dis}able consistently.

[MTD][NOR] Add physical address to point() method

Adding the ability to get a physical address from point() in addition
to virtual address.  This physical address is required for XIP of
userspace code from flash.

Signed-off-by: Jared Hulbert <jaredeh@gmail.com>
Reviewed-by: Jörn Engel <joern@logfs.org>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

firewire: fw-sbp2: log scsi_target ID at release

Makes the good-by message more informative.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jarod Wilson <jwilson@redhat.com>

ieee1394: fix NULL pointer dereference in sysfs access

Regression since "ieee1394: prevent device binding of raw1394,
video1394, dv1394", commit d2ace29fa44589da51fedc06a67b3f05301f3bfd:
$ cat /sys/bus/ieee1394/drivers/raw1394/device_ids
triggers a NULL pointer dereference in fw_show_drv_device_ids.
Reported by Miles Lane.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Tested-by: Miles Lane <miles.lane@gmail.com>

[JFFS2] Track parent inode for directories (for NFS export)

To support NFS export, we need to know the parent inode of directories.
Rather than growing the jffs2_inode_cache structure, share space with
the nlink field -- which was always set to 1 for directories anyway.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

kbuild: fix vmlinux.o link

We always linked vmliux.o.
Remove init/built-in.o dependency so we avoid this

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

kconfig: made check-lxdialog more portable

OS-X shell did not like 'echo -e' so implement
suggestion from Al Viro to use a more portable construct.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Acked-By: Timur Tabi <timur@freescale.com>

make generic sys_ptrace unconditional

With s390 the last arch switched to the generic sys_ptrace yesterday so
we can now kill the ifdef around it to enforce every new port it using
it instead of introducing new weirdo versions.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[JFFS2] Invert last argument of jffs2_gc_fetch_inode(), make it boolean.

We don't actually care about nlink; we only care whether the inode in
question is unlinked or not.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

Merge git://git./linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: fix early setup of hwif->host_flags

Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6

* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6:
  hwmon: (adt7473) minor cleanup / refactoring
  hwmon: (asb100) Remove some dead code
  hwmon: (lm75) Fix an incorrect comment
  hwmon: (w83793) VID and VRM handling cleanups
  hwmon: (w83l785ts) Don't ask the user to report failures
  hwmon: (smsc47b397) add a new chip id (0x8c)

Merge git://git./linux/kernel/git/rusty/linux-2.6-for-linus

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  module: add MODULE_STATE_GOING notifier call
  module: Enhance verify_export_symbols
  module: set unused_gpl_crcs instead of overwriting unused_crcs
  module: neaten __find_symbol, rename to find_symbol
  module: reduce module image and resident size
  module: make module_sect_attrs private to kernel/module.c

Merge git://git./linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] cryptd: Correct kzalloc error test
  [CRYPTO] eseqiv: Fix off-by-one encryption
  [CRYPTO] api: Fix scatterwalk_sg_chain
  [CRYPTO] authenc: Fix async crypto crash in crypto_authenc_genicv()

m68knommu: fix FEC driver locking

It's easy: grab locks before talking to hardware and realease
them afterwards. The one big lock has been splitted into a hw_lock
and mii_lock.

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: kill warnings in FEC driver

linux-2.6-mk68/drivers/net/fec.c: In function 'fec_enet_module_init':
linux-2.6-mk68/drivers/net/fec.c:2627: warning: unused variable 'j'
linux-2.6-mk68/drivers/net/fec.c: At top level:
linux-2.6-mk68/drivers/net/fec.c:2136: warning: 'mii_link_interrupt' defined but not used

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: remove unused interrupts in FEC driver

Remove the acquisition of unused interrupt types. We don't need to
register all the TX and RX varients used on some ColdFire FEC hardware.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: fix ColdFire 5272 fec driver hash registers

Renamed the 5272 hash_table registers to match the "grp" hash_table
registers of the other ColdFire parts. They are actually a group hash.
The makes for consistent setup across all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: fix compare race in sched related code

The interrupts must be disabled before considering the need resched
bit of the task struct and they have to be disabled before calling
schedule()

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: rework definition of HZ

Rework the HZ definition to be more consistent with other architectures.
Non-kernel includers will see a constant HZ setting of 100.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: update MAX_M68K_DMA_CHANNELS for some plattforms

include/asm-m68knommu/mcfdma.h defines base0-3 for M523x,
M527x and M528x so it looks this has been forgotten.

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: remove unused CONFIG_DISKtel

Remove unused CONFIG_DISKtel support.
Missing config definition pointed out by
Robert P. J. Day <rpjday@mindspring.com>

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: add WilFire and WildfireMod board support

This patch adds linux-2.6.x kernel support for the Intec Automation
ColdFire 5282-based boards, the WildFire and WildFireMod

Signed-Off-By: Steve Bennett <steveb@workware.net.au>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: remove unused CONFIG_MTD_KeyTechnology

Remove unused board type CONFIG_MTD_KeyTechnology.
Pointed out by Robert P. J. Day <rpjday@mindspring.com>

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: fix 5206e UART init function naming

Fix ColdFire 5206e platform UART init function naming.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: add some missing sections into the linker script

Add some missing sections into the linker script.
Those are required for spinlocks & kallsyms.

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: add pretty back strace

With this patch and
 CONFIG_FRAME_POINTER=y
 CONFIG_KALLSYMS=y
The backtrace shows resolved function names and their numeric
address.

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: add a missing backslash n in setup code

add a missing backslash n in setup code

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: ColdFire add support for kernel preemption

As the subject says this patch adds the support for kernel preemption
on m68knommu Coldfire. I thing the same changes could be applied to
68360 & 68328 but since I don't have the HW for testing, I don't touch it.

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: fix signal handling return path

The return from software signal handling pushes code on the stack
that system calls to the kernels cleanup code. This is borrowed
directly from the m68k linux signal handler.

The rt signal case is not quite right for the restricted instruction
set of the ColdFire parts. And neither the normal signal case or rt
signal case properly flushes/pushes the appropriate cache lines.

Rework the return path to just call back through some code fragments
in the kernel proper (with no MMU in the way we can do this). No
cache problems, and less code overall.

Original patch submitted by Wilson Callan <wcallan@savantav.com>

Greg fixed the rt signal return path to use the proper system call

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/scsi/mvsas.c: fix printk warnings

drivers/scsi/mvsas.c: In function `mvs_update_phyinfo':
drivers/scsi/mvsas.c:2822: warning: long long unsigned int format, u64 arg (arg 5)
drivers/scsi/mvsas.c:2822: warning: long long unsigned int format, u64 arg (arg 6)

We do not know what type the arch uses to implement u64.

Cc: Ke Wei <kewei@marvell.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/scsi/ncr53c8xx.c: fix warning

drivers/scsi/ncr53c8xx.c: In function 'process_waiting_list':
drivers/scsi/ncr53c8xx.c:8225: warning: suggest parentheses around assignment used as truth value

recently added by

commit 172c122df5186e7cbd413d61757ff90267331002
Author: Harvey Harrison <harvey.harrison@gmail.com>
Date:   Mon Apr 28 16:50:03 2008 -0700

    scsi: fix integer as NULL pointer warnings

Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers-char-synclinkc-inbreak-mgsl_put_char-fix

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/char/synclink.c: unbreak mgsl_put_char()

Repair the effects of

commit 55da77899c1472d83452c914fa179d00ea96df65
Author: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date:   Wed Apr 30 00:54:07 2008 -0700

    synclink series: switch to int put_char method

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Paul Fulghum <paulkf@microgate.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
drivers/char/synclink_gt.c: In function 'put_char':
drivers/char/synclink_gt.c:919: warning: 'ret' may be used uninitialized in this function

and do some whitespace repair and unneeded-cast-removal in there as well.

Cc: Paul Fulghum <paulkf@microgate.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

block: remove remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cpu: change cpu_sys_devices from array to per_cpu variable

Change cpu_sys_devices from array to per_cpu variable in drivers/base/cpu.c.

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fuse: use clamp() rather than nested min/max

clamp() exists for this use.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cciss: assign PDE->data before gluing PDE into /proc tree

Simply replace proc_create and further data assigned with proc_create_data.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: Alexey Dobriyan <adobriyan@openvz.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Mike Miller <mike.miller@hp.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

workqueue: remove redundant function invocation

timer_stats_timer_set_start_info is invoked twice, additionally, the
invocation of this function can be moved to where it is only called when a
delay is really required.

Signed-off-by: Andrew Liu <shengping.liu@windriver.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: simple stats for memory resource controller

Implement trivial statistics for the memory resource controller.

Signed-off-by: Balaji Rao <balajirrao@gmail.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: pca953x: add support for pca9555 I2C I/O expander

Add support for pca9555 I2C I/O expander.  As the comment suggests this part
is software compatible with the pca9539.

Signed-off-by: Will Newton <will.newton@imgtec.com>
Cc: "eric miao" <eric.miao@marvell.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs: path_{get,put}() cleanups

Here are some more places where path_{get,put}() can be used instead of
dput()/mntput() pair.  Besides that it fixes a bug in autofs4_mount_busy()
where mntput() was called before dput().

Signed-off-by: Jan Blunck <jblunck@suse.de>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs4: fix incorrect return from root.c:try_to_fill_dentry()

Jeff Moyer has identified a case where the autofs4 function
root.c:try_to_fill_dentry() can return -EBUSY when it should return 0.

Jeff's description of the way this happens is:

"automount starts an expire for directory d.  after the callout to the daemon,
but before the rmdir, another process tries to walk into the same directory.
It puts itself onto the waitq, pending the expiration.

When the expire finishes, the second process is woken up.  In
try_to_fill_dentry, it does this check:

                status = d_invalidate(dentry);
                if (status != -EBUSY)
                        return -EAGAIN;

And status is EBUSY.  The dentry still has a non-zero d_inode, and the
flags do not contain LOOKUP_CONTINUE or LOOKUP_DIRECTORY

So, we fall through and return -EBUSY to the caller."

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs4: fix execution order race in mount request code

Jeff Moyer has identified a race in due to an execution order dependency
in the autofs4 function root.c:try_to_fill_dentry().

Jeff's description of this race is:

"P1 does a lookup of /mount/submount/foo.  Since the VFS can't find an entry
for "foo" under /mount/submount, it calls into the autofs4 kernel module to
allocate a new dentry, D1.  The kernel creates a new waitq for this lookup and
calls the daemon to perform the mount.

The daemon performs a mkdir of the "foo" directory under /mount/submount,
which ends up creating a *new* dentry, D2.

Then, P2 does a lookup of /mount/submount/foo.  The VFS path walking logic
finds a dentry in the dcache, D2, and calls the revalidate function with this.
 In the autofs4 revalidate code, we then trigger a mount, since the dentry is
an empty directory that isn't a mountpoint, and so set DCACHE_AUTOFS_PENDING
and call into the wait code to trigger the mount.

The wait code finds our existing waitq entry (since it is keyed off of the
directory name) and adds itself to the list of waiters.

After the daemon finishes the mount, it calls back into the kernel to release
the waiters.  When this happens, P1 is woken up and goes about clearing the
DCACHE_AUTOFS_PENDING flag, but it does this in D1!  So, given that P1 in our
case is a program that will immediately try to access a file under
/mount/submount/foo, we end up finding the dentry D2 which still has the
pending flag set, and we set out to wait for a mount *again*!

So, one way to address this is to re-do the lookup at the end of
try_to_fill_dentry, and to clear the pending flag on the hashed dentry.  This
seems a sane approach to me."

And Jeff's patch does this.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs4: check for invalid dentry in getpath

Catch invalid dentry when calculating its path.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs4: fix sparse warning in waitq.c:autofs4_expire_indirect()

Re-order some code in expire.c:autofs4_expire_indirect() to avoid compile
warning, reported by Harvey Harrison:

 CHECK   fs/autofs4/expire.c
fs/autofs4/expire.c:383:2: warning: context imbalance in
'autofs4_expire_indirect' - unexpected unlock

Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

quota: add a convenience macro for filesystems

Note that it cannot be an inline function because we don't have struct
super_block prototype...

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

spi_s3c24xx signedness fix

On Fri, Apr 18, 2008 at 09:08:55PM +0200, Julia Lawall wrote:
> I found 63 occurrences of this problem with the following semantic match
> (http://www.emn.fr/x-info/coccinelle/):
>
> @@ unsigned int i; @@
>
> * i < 0
>

Since this one's always in the range 0-255, it could probably be made
signed, but it's just as easy to make it work unsigned.

Reported-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

spi_bfin5xx: use PIO for full duplex, not DMA

Use PIO for full-duplex transfers, instead of DMA.

Signed-off-by: Vitja Makarov <vitja.makarov@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dmi: clean-up dmi helper declarations

The declaration of dmi helper functions is a bit messy and inconsistent at the
moment:

* On ia64 they are declared in <asm/io.h>.
* On x86-64 they are declared in <asm/dmi.h>.
* On i386 they are declared both in <asm/io.h> and <asm/dmi.h>.

Fix the header files so that the dmi helper functions are consistently
defined in <asm/dmi.h>.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

jsm: add new supported board to jsm serial driver

Add new PCI Express Neo/JSM board to the supported list of drivers in
the JSM driver.

Signed-off-by: Scott Kilau <scottk@digi.com>
Acked-by: Ananda V <avenkat@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8250: switch 8250 drivers to use _nocache ioremaps

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i8k: make fan multiplier tunable with a module parameter

The i8k driver multiplies the fan speed reported by the BIOS with a factor of
30.  On my Dell Latitude D800, this factor is not required.

I'd suggest to make this configurable.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

idr: fix idr_remove()

The return inside the loop makes us free only a single layer.

Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Jim Houston <jim.houston@comcast.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

PNP: fix printk format warnings

next-20080430/drivers/pnp/pnpbios/rsparser.c:594: warning: format '%d' expects type 'int', but argument 4 has type 'resource_size_t'
next-20080430/drivers/pnp/pnpbios/rsparser.c:605: warning: format '%d' expects type 'int', but argument 4 has type 'resource_size_t'

[joe@perches.com: fix it]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pcmcia: replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/pcmcia/soc_common.c: convert soc_pcmcia_sockets_lock into a mutex and make it static

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Alchemy Semi Au1000 pcmcia driver: convert pcmcia_sockets_lock in a mutex

Alchemy Semi Au1000 pcmcia driver: The semaphore pcmcia_sockets_lock
is used as a mutex, convert it to the mutex API

(akpm: make it static too)

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pcmcia: annotate cb_alloc with __ref

cb_alloc() uses a function (pci_scan_slot) that will be annotated __devinit.

Annotate cb_alloc() with __ref to tell modpost to ignore this reference.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pcmcia: silence section mismatch warnings from pci_driver variables

Silence following warnings:
WARNING: drivers/pcmcia/built-in.o(.data+0x14e0): Section mismatch in reference from the variable pd6729_pci_drv to the function .devinit.text:pd6729_pci_probe()
WARNING: drivers/pcmcia/built-in.o(.data+0x14e8): Section mismatch in reference from the variable pd6729_pci_drv to the function .devexit.text:pd6729_pci_remove()
WARNING: drivers/pcmcia/built-in.o(.data+0x16c0): Section mismatch in reference from the variable i82092aa_pci_drv to the function .devinit.text:i82092aa_pci_probe()
WARNING: drivers/pcmcia/built-in.o(.data+0x16c8): Section mismatch in reference from the variable i82092aa_pci_drv to the function .devexit.text:i82092aa_pci_remove()

Rename the variables from *_drv to *_driver so modpost ignore the OK
references to __devinit/__devexit functions.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pcmcia: silence section mismatch warnings from class_interface variables

Silence the following warnings:
WARNING: drivers/pcmcia/built-in.o(.data+0x6e8): Section mismatch in reference from the variable pcmcia_bus_interface to the function .devinit.text:pcmcia_bus_add_socket()
WARNING: drivers/pcmcia/built-in.o(.data+0xa88): Section mismatch in reference from the variable pccard_rsrc_interface to the function .devinit.text:pccard_sysfs_add_rsrc()
WARNING: drivers/pcmcia/built-in.o(.data+0xa90): Section mismatch in reference from the variable pccard_rsrc_interface to the function .devexit.text:pccard_sysfs_remove_rsrc()

The variables of type class_interface contains references
to __devinit and __devexit functions which is OK.
Silence warnings by annotating the variables with __refdata.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kexec: make extended crashkernel= syntax less confusing

The extended crashkernel syntax is a little confusing in the way it handles
ranges.  eg:

 crashkernel=512M-2G:64M,2G-:128M

Means if the machine has between 512M and 2G of memory the crash region should
be 64M, and if the machine has 2G of memory the region should be 64M.  Only if
the machine has more than 2G memory will 128M be allocated.

Although that semantic is correct, it is somewhat baffling.  Instead I propose
that the end of the range means the first address past the end of the range,
ie: 512M up to but not including 2G.

[bwalle@suse.de: clarify inclusive/exclusive in crashkernel commandline in documentation]
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Bernhard Walle <bwalle@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Simon Horman <horms@verge.net.au>
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

docbook: fix vmalloc missing parameter notation

Fix vmalloc kernel-doc warning:

Warning(linux-2.6.25-git14//mm/vmalloc.c:555): No description found for parameter 'caller'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

isdn: hysdn_procconf.c build fix

x86.git randconfig testing found the following build error in latest
-git:

  CC [M]  drivers/isdn/hysdn/hysdn_procconf.o
  CC [M]  drivers/isdn/hysdn/hysdn_init.o
  drivers/isdn/hysdn/hysdn_procconf.c: In function 'hysdn_procconf_init':
  drivers/isdn/hysdn/hysdn_procconf.c:408: error: too few arguments to function 'proc_create'

with the following config:

  http://redhat.com/~mingo/misc/config-Wed_Apr_30_15_12_48_CEST_2008.bad

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: "Denis V. Lunev" <den@openvz.org>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Embedded Maintainer(s), linux-embedded@vger list

Add Paul and myself, and the linux-embedded list, to MAINTAINERS.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vfs: fix permission checking in sys_utimensat

If utimensat() is called with both times set to UTIME_NOW or one of them to
UTIME_NOW and the other to UTIME_OMIT, then it will update the file time
without any permission checking.

I don't think this can be used for anything other than a local DoS, but could
be quite bewildering at that (e.g.  "Why was that large source tree rebuilt
when I didn't modify anything???")

This affects all kernels from 2.6.22, when the utimensat() syscall was
introduced.

Fix by doing the same permission checking as for the "times == NULL" case.

Thanks to Michael Kerrisk, whose utimensat-non-conformances-and-fixes.patch in
-mm also fixes this (and breaks other stuff), only he didn't realize the
security implications of this bug.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysfs: sysfs_update_group stub for CONFIG_SYSFS=n

scsi_transport_spi uses sysfs_update_group() when CONFIG_SYSFS=n, so provide a
stub for it.

next-20080423/drivers/scsi/scsi_transport_spi.c:1467: error: implicit declaration of function 'sysfs_update_group'
make[3]: *** [drivers/scsi/scsi_transport_spi.o] Error 1

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Greg KH <greg@kroah.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add a new sysfs_streq() string comparison function

Add a new sysfs_streq() string comparison function, which ignores
the trailing newlines found in sysfs inputs.  By example:

sysfs_streq("a", "b") ==> false
sysfs_streq("a", "a") ==> true
sysfs_streq("a", "a\n") ==> true
sysfs_streq("a\n", "a") ==> true

This is intended to simplify parsing of sysfs inputs, letting them
avoid the need to manually strip off newlines from inputs.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ntp: handle leap second via timer

Remove the leap second handling from second_overflow(), which doesn't have to
check for it every second anymore.  With CONFIG_NO_HZ this also makes sure the
leap second is handled close to the full second.  Additionally this makes it
possible to abort a leap second properly by resetting the STA_INS/STA_DEL
status bits.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ntp: remove current_tick_length()

current_tick_length used to do a little more, but now it just returns
tick_length, which we can also access directly at the few places, where it's
needed.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ntp: rename TICK_LENGTH_SHIFT to NTP_SCALE_SHIFT

As TICK_LENGTH_SHIFT is used for more than just the tick length, the name
isn't quite approriate anymore, so this renames it to NTP_SCALE_SHIFT.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ntp: support for TAI

This adds support for setting the TAI value (International Atomic Time).  The
value is reported back to userspace via timex (as we don't have a
ntp_gettime() syscall).

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ntp: increase time_offset resolution

time_offset is already a 64bit value but its resolution barely used, so this
makes better use of it by replacing SHIFT_UPDATE with TICK_LENGTH_SHIFT.

Side note: the SHIFT_HZ in SHIFT_UPDATE was incorrect for CONFIG_NO_HZ and the
primary reason for changing time_offset to 64bit to avoid the overflow.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ntp: increase time_freq resolution

This changes time_freq to a 64bit value and makes it static (the only outside
user had no real need to modify it).  Intermediate values were already 64bit,
so the change isn't that big, but it saves a little in shifts by replacing
SHIFT_NSEC with TICK_LENGTH_SHIFT.  PPM_SCALE is then used to convert between
user space and kernel space representation.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ntp: NTP4 user space bits update

This adds a few more things from the ntp nanokernel related to user space.
It's now possible to select the resolution used of some values via STA_NANO
and the kernel reports in which mode it works (pll/fll).

If some values for adjtimex() are outside the acceptable range, they are now
simply normalized instead of letting the syscall fail.  I removed
MOD_CLKA/MOD_CLKB as the mapping didn't really makes any sense, the kernel
doesn't support setting the clock.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ntp: cleanup ntp.c

This is mostly a style cleanup of ntp.c and extracts part of do_adjtimex as
ntp_update_offset().  Otherwise the functionality is still the same as before.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

remove div_long_long_rem

x86 is the only arch right now, which provides an optimized for
div_long_long_rem and it has the downside that one has to be very careful that
the divide doesn't overflow.

The API is a little akward, as the arguments for the unsigned divide are
signed.  The signed version also doesn't handle a negative divisor and
produces worse code on 64bit archs.

There is little incentive to keep this API alive, so this converts the few
users to the new API.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rename div64_64 to div64_u64

Rename div64_64 to div64_u64 to make it consistent with the other divide
functions, so it clearly includes the type of the divide.  Move its definition
to math64.h as currently no architecture overrides the generic implementation.
 They can still override it of course, but the duplicated declarations are
avoided.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: Avi Kivity <avi@qumranet.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

convert a few do_div users

This converts a few users of do_div to div_[su]64 and this demonstrates nicely
how it can reduce some expressions to one-liners.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

introduce explicit signed/unsigned 64bit divide

The current do_div doesn't explicitly say that it's unsigned and the signed
counterpart is missing, which is e.g.  needed when dealing with time values.

This introduces 64bit signed/unsigned divide functions which also attempts to
cleanup the somewhat awkward calling API, which often requires the use of
temporary variables for the dividend.  To avoid the need for temporary
variables everywhere for the remainder, each divide variant also provides a
version which doesn't return the remainder.

Each architecture can now provide optimized versions of these function,
otherwise generic fallback implementations will be used.

As an example I provided an alternative for the current x86 divide, which
avoids the asm casts and using an union allows gcc to generate better code.
It also avoids the upper divde in a few more cases, where the result is known
(i.e.  upper quotient is zero).

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

frv: unbreak misalignment handling changes

Fix a reference in a arch/frv/mm/Makefile to unaligned.c which has now been
deleted.

Also revert the change to the guard macro name in include/asm-frv/unaligned.h.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix cpu hotplug problem in softirq code

currently cpu hotplug (unplug) seems broken on s390 and likely others. On cpu
unplug the system starts to behave very strange and hangs.

I bisected the problem to the following commit:

commit 48f20a9a9488c432fc86df1ff4b7f4fa895d1183
Author: Olof Johansson <olof@lixom.net>
Date: Tue Mar 4 15:23:25 2008 -0800
tasklets: execute tasklets in the same order they were queued

Reverting this patch seems to fix the problem.  I looked into takeover_tasklet
and it seems that there is a way to corrupt the tail pointer of the current
cpu.  If the tasklet list of the frozen cpu is empty, the tail pointer of the
current cpu points to the address of the head pointer of the stopped cpu and
not to the next pointer of a tasklet_struct.

This patch avoids the list splice of the list is empty and cpu hotplug seems
to work as the tail pointer is not corrupted.  Olof, can you look into that
patch and ACK/NACK it so Andrew can push this to Linus, if appropriate?
Please note that some lines are longer than 80 chars, but line-wrapping looked
worse that this version.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cpusets: update maintainers

Update CPUSETS MAINTAINERS to reflect the more active role of Paul Menage
(secondary to his work on cgroups) and the retirement of the original author
of cpusets, Simon Derr.  Thanks, Simon!  Best of luck to you.

Signed-off-by: Paul Jackson <pj@sgi.com>
Acked-by: Paul Menage <menage@google.com>
Acked-by: Simon Derr <simon.derr@bull.net>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[JFFS2] Quiet lockdep false positive.

Don't hold f->sem while calling into jffs2_do_create(). It makes lockdep
unhappy, and we don't really need it -- the _reason_ it's a false
positive is because nobody else can see this inode yet and so nobody
will be trying to lock it anyway.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

ide: fix early setup of hwif->host_flags

On Thursday 01 May 2008, Jeremy Kerr wrote:
> Hi all,
>
> On QS20 Cell machines, Linus' current git tree explodes on boot:
>
> SiI680: IDE controller (0x1095:0x0680 rev 0x02) at  PCI slot
> 0000:00:0a.0
> SiI680: BASE CLOCK == 133
> SiI680: 100% native mode on irq 51
>     ide0: MMIO-DMA
>     ide1: MMIO-DMA
> Unable to handle kernel paging request for data at address
> 0xa000100081220080
> Faulting instruction address: 0xc000000000024748
> cpu 0x2: Vector: 300 (Data Access) at [c00000001e143420]
>     pc: c000000000024748: ._insw_ns+0x10/0x30
>     lr: c000000000037fc4: .spiderpci_readsw+0x24/0x6c
>     sp: c00000001e1436a0
>    msr: 9000000000001032
>    dar: a000100081220080
>  dsisr: 40000000
>   current = 0xc00000003d060000
>   paca    = 0xc000000000623880
>     pid   = 1, comm = swapper
> enter ? for help
> [link register   ] c000000000037fc4 .spiderpci_readsw+0x24/0x6c
> [c00000001e1436a0] c00000000062ce63 (unreliable)
> [c00000001e143730] c0000000000379d4 .iowa_readsw+0x78/0xa8
> [c00000001e1437c0] c000000000037a98 .iowa_insw+0x94/0xd4
> [c00000001e143850] c00000000022a190 .ata_input_data+0x298/0x2ec
> [c00000001e143910] c00000000022b600 .try_to_identify+0x2c0/0x6d4
> [c00000001e1439d0] c00000000022bb54 .do_probe+0x140/0x35c
> [c00000001e143a80] c00000000022bfbc .ide_probe_port+0x24c/0x670
> [c00000001e143b50] c00000000022d09c .ide_device_add_all+0x2ec/0x690
> [c00000001e143c00] c00000000022d4a4 .ide_device_add+0x64/0x74
> [c00000001e143c90] c00000000022f834 .ide_setup_pci_device+0x58/0x7c
> [c00000001e143d30] c00000000038bdf8
> [c00000001e143e10] c000000000486fb0 .ide_scan_pcibus+0x8c/0x178
> [c00000001e143ea0] c000000000460c00 .kernel_init+0x1c4/0x344
> [c00000001e143f90] c000000000024a1c .kernel_thread+0x4c/0x68
>
> It looks like we're trying to do PIO accesses (which appear to be
> broken, but that's another issue) to this MMIO device. In
> ata_input_data, we see that:
>
>  u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
>
> Gives mmio == 0.
>
> (what's the difference between hwif->mmio and ID_HFLAG_MMIO?)
>
> In the siimage driver, hwif->host flags is initially set up correctly
> (host_flags includes IDE_HFLAG_MMIO), but we then *clear* this bit in
> ide_init_port:
>
>  hwif->host_flags = d->host_flags;
>
> where d is the struct ide_port_info for this chipset. In my case,
> d->host_flags is 0x0. It looks like this will be the same for all of
> the siimage chipsets.

Don't over-write hwif->host_flags in ide_init_port(), some host drivers
set IDE_HFLAG_MMIO or IDE_HFLAG_NO_IO_32BIT host flag early.

Thanks to Jeremy Kerr for the excellent analysis of the bug.

Reported-by: Jeremy Kerr <jk@ozlabs.org>
Tested-by: Jeremy Kerr <jk@ozlabs.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Merge branch 'smsc47b397-new-id' into release

[JFFS2] Clean up jffs2_alloc_inode() and jffs2_i_init_once()

Ditch a couple of pointless casts from void *, and use the normal
variable name 'f' for jffs2_inode_info pointers -- especially since
it actually shows up in lockdep reports.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

module: add MODULE_STATE_GOING notifier call

Provide module unload callback. Required by the gcov profiling
infrastructure to keep track of profiling data structures.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

module: Enhance verify_export_symbols

Make verify_export_symbols check the modules unused, unused_gpl and
gpl_future syms.

Inspired by Jan Beulich's fix, but table-driven.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

module: set unused_gpl_crcs instead of overwriting unused_crcs

Obvious typo, but I don't know of any modules with unused GPL exports,
and then it would take someone noticing that the version shouldn't
have matched in a dependent module.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

module: neaten __find_symbol, rename to find_symbol

__find_symbol() has grown over time: there are now 5 different arrays
of symbols it traverses.  It also shouldn't print out a warning on
some calls (ie. verify_symbol which simply checks for name clashes,
and __symbol_put which checks for bugs).

1) Rename to find_symbol: no need for underscores.
2) Use bool and add "warn" parameter to suppress warnings.
3) Make table-driven rather than open coded.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

module: reduce module image and resident size

Resulting reduction (x86-64, gcc 4.1.2) with my (special purpose, i.e.
much reduced) configurations:
- 16k kernel resident size
- 180k module resident size
- 10k module image size

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

module: make module_sect_attrs private to kernel/module.c

No-one else is using these afaics.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

[CRYPTO] cryptd: Correct kzalloc error test

Normally, kzalloc returns NULL or a valid pointer value, not a value to be
tested using IS_ERR.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

[CRYPTO] eseqiv: Fix off-by-one encryption

After attaching the IV to the head during encryption, eseqiv does not
increase the encryption length by that amount.  As such the last block
of the actual plain text will be left unencrypted.

Fortunately the only user of this code hifn currently crashes so this
shouldn't affect anyone :)

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

[CRYPTO] api: Fix scatterwalk_sg_chain

When I backed out of using the generic sg chaining (as it isn't currently
portable) and introduced scatterwalk_sg_chain/scatterwalk_sg_next I left
out the sg_is_last check in the latter.  This causes it to potentially
dereference beyond the end of the sg array.

As most uses of scatterwalk_sg_next are bound by an overall length, this
only affected the chaining code in authenc and eseqiv. Thanks to Patrick
McHardy for identifying this problem.

This patch also clears the "last" bit on the head of the chained list as
it's no longer last.  This also went missing in scatterwalk_sg_chain and
is present in sg_chain.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

[CRYPTO] authenc: Fix async crypto crash in crypto_authenc_genicv()

crypto_authenc_givencrypt_done uses req->data as struct aead_givcrypt_request,
while it really points to a struct aead_request, causing this crash:

BUG: unable to handle kernel paging request at 6b6b6b6b
IP: [<dc87517b>] :authenc:crypto_authenc_genicv+0x23/0x109
*pde = 00000000
Oops: 0000 [#1] PREEMPT DEBUG_PAGEALLOC
Modules linked in: hifn_795x authenc esp4 aead xfrm4_mode_tunnel sha1_generic hmac crypto_hash]

Pid: 3074, comm: ping Not tainted (2.6.25 #4)
EIP: 0060:[<dc87517b>] EFLAGS: 00010296 CPU: 0
EIP is at crypto_authenc_genicv+0x23/0x109 [authenc]
EAX: daa04690 EBX: daa046e0 ECX: dab0a100 EDX: daa046b0
ESI: 6b6b6b6b EDI: dc872054 EBP: c033ff60 ESP: c033ff0c
 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Process ping (pid: 3074, ti=c033f000 task=db883a80 task.ti=dab6c000)
Stack: 00000000 daa046b0 c0215a3e daa04690 dab0a100 00000000 ffffffff db9fd7f0
       dba208c0 dbbb1720 00000001 daa04720 00000001 c033ff54 c0119ca9 dc852a75
       c033ff60 c033ff60 daa046e0 00000000 00000001 c033ff6c dc87527b 00000001
Call Trace:
 [<c0215a3e>] ? dev_alloc_skb+0x14/0x29
 [<c0119ca9>] ? printk+0x15/0x17
 [<dc87527b>] ? crypto_authenc_givencrypt_done+0x1a/0x27 [authenc]
 [<dc850cca>] ? hifn_process_ready+0x34a/0x352 [hifn_795x]
 [<dc8353c7>] ? rhine_napipoll+0x3f2/0x3fd [via_rhine]
 [<dc851a56>] ? hifn_check_for_completion+0x4d/0xa6 [hifn_795x]
 [<dc851ab9>] ? hifn_tasklet_callback+0xa/0xc [hifn_795x]
 [<c011d046>] ? tasklet_action+0x3f/0x66
 [<c011d230>] ? __do_softirq+0x38/0x7a
 [<c0105a5f>] ? do_softirq+0x3e/0x71
 [<c011d17c>] ? irq_exit+0x2c/0x65
 [<c010e0c0>] ? smp_apic_timer_interrupt+0x5f/0x6a
 [<c01042e4>] ? apic_timer_interrupt+0x28/0x30
 [<dc851640>] ? hifn_handle_req+0x44a/0x50d [hifn_795x]
 ...

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>