Graf Yang [Sun, 23 May 2010 08:40:13 +0000 (04:40 -0400)]
serial: bfin_5xx: IRDA is not affected by anomaly
05000230
Anomaly
05000230 (over sampling of the UART STOP bit) applies only when
the peripheral is operating in UART mode. So drop the anomaly handling
when the UART is in IRDA mode.
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alexander Kurz [Wed, 19 May 2010 20:40:08 +0000 (00:40 +0400)]
serial_cs: add and sort IDs for serial and modem cards
Signed-off-by: Alexander Kurz <linux@kbdbabel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Abhijeet Dharmapurikar [Thu, 20 May 2010 22:20:23 +0000 (15:20 -0700)]
msm_serial: fix serial on trout
Set the mnd counter based on uartclk. This fixes a problem
on 7x30 where the uartclk is 19.2Mhz rather than the usual
4.8Mhz.
Trout incorrectly reports uartclk to be running at 19.2Mhz
It is actually running at 4.8Mhz. For trout force mnd
counter values as if uartclk was fed by tcxo/4.
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
[dwalker@codeaurora.org: inlined, moved into header, added comments.]
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Nick Piggin [Mon, 31 May 2010 07:58:02 +0000 (17:58 +1000)]
fix setattr error handling in sysfs, configfs
sysfs and configfs setattr functions have error cases after the generic inode's
attributes have been changed. Fix consistency by changing the generic inode
attributes only when it is guaranteed to succeed.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Carpenter [Tue, 25 May 2010 09:51:10 +0000 (11:51 +0200)]
kobject: free memory if netlink_kernel_create() fails
There is a kfree(ue_sk) missing on the error path if
netlink_kernel_create() fails.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Morton [Fri, 21 May 2010 22:05:21 +0000 (15:05 -0700)]
lib/kobject_uevent.c: fix CONIG_NET=n warning
lib/kobject_uevent.c:87: warning: 'kobj_bcast_filter' defined but not used
Repairs "hotplug: netns aware uevent_helper"
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Fri, 4 Jun 2010 18:02:42 +0000 (14:02 -0400)]
USB: unbind all interfaces before rebinding them
This patch (as1387) fixes a bug introduced during the changeover to
the runtime PM framework. When a driver doesn't support resume or
reset-resume, and consequently its interfaces need to be unbound and
rebound, we have to unbind all the interfaces before trying to rebind
any of them. Otherwise the driver's probe method for one interface
could try to claim a different interface and fail, because that other
interface hasn't been unbound yet.
This fixes Bugzilla #15788. The symptom is that some USB sound cards
don't work after hibernation.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: François Valenduc <francois.valenduc@tvcablenet.be>
Cc: stable <stable@kernel.org> [.34]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Julia Lawall [Thu, 27 May 2010 12:32:09 +0000 (14:32 +0200)]
USB: serial: digi_acceleport: Eliminate a NULL pointer dereference
If port is NULL, then the call to dev_err will dereference a value that is
a small offset from NULL.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@r exists@
expression E,E1;
identifier f;
statement S1,S2,S3;
@@
if ((E == NULL && ...) || ...)
{
... when != if (...) S1 else S2
when != E = E1
* E->f
... when any
return ...;
}
else S3
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Grant Likely [Wed, 2 Jun 2010 19:53:17 +0000 (13:53 -0600)]
usb: fix ehci_hcd build failure when both generic-OF and xilinx is selected
This patch fixes the driver to allow both CONFIG_USB_EHCI_HCD_PPC_OF and
CONFIG_USB_ECHI_HCD_XILINX to be selected.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
CC: John Linn <john.linn@xilinx.com>
CC: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Axel Lin [Mon, 31 May 2010 00:04:47 +0000 (08:04 +0800)]
USB: cdc-acm: fix resource reclaim in error path of acm_probe
This patch fixes resource reclaim in error path of acm_probe:
1. In the case of "out of memory (read urbs usb_alloc_urb)\n")", there
is no need to call acm_read_buffers_free(acm) here. Fix it by goto
alloc_fail6 instead of alloc_fail7.
2. In the case of "out of memory (write urbs usb_alloc_urb)",
usb_alloc_urb may fail in any iteration of the for loop. Current
implementation does not properly free allocated snd->urb. Fix it by
goto alloc_fail8 instead of alloc_fail7.
3. In the case of device_create_file(&intf->dev,&dev_attr_iCountryCodeRelDate)
fail, acm->country_codes is kfreed. As a result, device_remove_file
for dev_attr_wCountryCodes will not be executed in acm_disconnect.
Fix it by calling device_remove_file for dev_attr_wCountryCodes
before goto skip_countries.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Daniel Mack [Thu, 3 Jun 2010 11:55:02 +0000 (13:55 +0200)]
USB: ftdi_sio: fix DTR/RTS line modes
Call set_mctrl() and clear_mctrl() according to the flow control mode
selected. This makes serial communication for FT232 connected devices
work when CRTSCTS is not set.
This fixes a regression introduced by
4175f3e31 ("tty_port: If we are
opened non blocking we still need to raise the carrier"). This patch
calls the low-level driver's dtr_rts() function which consequently sets
TIOCM_DTR | TIOCM_RTS. A later call to set_termios() without CRTSCTS in
cflags, however, does not reset these bits, and so data is not actually
sent out on the serial wire.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Johan Hovold <jhovold@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ben Dooks [Tue, 25 May 2010 04:36:52 +0000 (05:36 +0100)]
USB: s3c-hsotg: Ensure FIFOs are fully flushed after layout
According to the design guide, if the FIFO layout is changed, then the
FIFOs must be flushed to ensure all FIFO pointers are correct.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ben Dooks [Tue, 25 May 2010 04:36:51 +0000 (05:36 +0100)]
USB: s3c-hsotg: SoftDisconnect minimum 3ms
The shortest period SoftDisconnect can be asserted for is 3 milliseconds
according to the V210 datasheet, so ensure that we add an msleep() to
the registration code to enforce this.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ben Dooks [Tue, 25 May 2010 04:36:50 +0000 (05:36 +0100)]
USB: s3c-hsotg: Ensure TX FIFO addresses setup when initialising FIFOs
Some versions of the S3C HS OtG block startup with overlapping TX FIFO
information, so change the fifo_init code to ensure that known values
are set into the FIFO registers at initialisation/reset time.
This also ensures that the FIFO RAM pointers are in a known state
before use.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Maurus Cuelenaere [Tue, 25 May 2010 04:36:49 +0000 (05:36 +0100)]
USB: s3c_hsotg: define USB_GADGET_DUALSPEED in Kconfig
The s3c_hsotg driver sets usb_gadget->is_dualspeed to 1, yet it doesn't define
USB_GADGET_DUALSPEED in Kconfig. This triggers a NULL pointer dereference in
the composite driver (which is fixed in another patch).
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Thomas Abraham [Mon, 24 May 2010 08:48:56 +0000 (17:48 +0900)]
USB: s3c: Enable soft disconnect during initialization
Enable soft disconnect bit the OTG core during initialization. Without this,
the host sees that a gadget is connected and tries to enumerate. The
soft disconnect should be enabled until the USB gadget driver is
registered with this otg driver.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sarah Sharp [Mon, 24 May 2010 20:25:28 +0000 (13:25 -0700)]
USB: xhci: Print NEC firmware version.
The NEC xHCI host controller firmware version can be found by putting a
vendor-specific command on the command ring and extracting the BCD
encoded-version out of the vendor-specific event TRB.
The firmware version debug line in dmesg will look like:
xhci_hcd 0000:05:00.0: NEC firmware version 30.21
(NEC merged with Renesas Technologies and became Renesas Electronics on
April 1, 2010. I have their OK to merge this vendor-specific code.)
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Satoshi Otani <satoshi.otani.xm@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sarah Sharp [Mon, 24 May 2010 20:25:21 +0000 (13:25 -0700)]
USB: xhci: Wait for host to start running.
When the run bit is set in the xHCI command register, it may take a few
microseconds for the host to start running. We cannot ring any doorbells
until the host is actually running, so wait until the status register says
the host is running.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Shinya Saito <shinya.saito.sx@renesas.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sarah Sharp [Mon, 24 May 2010 20:25:15 +0000 (13:25 -0700)]
USB: xhci: Wait for controller to be ready after reset.
After software resets an xHCI host controller, it must wait for the
"Controller Not Ready" (CNR) bit in the status register to be cleared.
Software is not supposed to ring any doorbells or write to any registers
except the status register until this bit is cleared.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike Frysinger [Fri, 21 May 2010 08:37:42 +0000 (04:37 -0400)]
USB: isp1362: fix inw warning on Blackfin systems
The Blackfin code is incorrectly casting the argument to inw() to a pointer.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Johan Hovold [Wed, 19 May 2010 20:13:17 +0000 (22:13 +0200)]
USB: mos7840: fix null-pointer dereference
Fix null-pointer dereference on error path.
Cc: stable <stable@kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Torvalds [Fri, 4 Jun 2010 20:04:39 +0000 (13:04 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPI: Eliminate us to pm ticks conversion in common path
ACPI: Fix the incorrect calculation about C-state idle time
ACPI: update feature-removal.txt to reflect deleted acpi=ht option
ACPI / EC / PM: Fix names of functions that block/unblock EC transactions
ACPI / EC / PM: Fix race between EC transactions and system suspend
Len Brown [Fri, 4 Jun 2010 19:23:02 +0000 (15:23 -0400)]
Merge branch 'acpi-idle' into release
Linus Torvalds [Fri, 4 Jun 2010 19:22:43 +0000 (12:22 -0700)]
Merge branch 'sfi-release' of git://git./linux/kernel/git/lenb/linux-sfi-2.6
* 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6:
SFI: do not return freed pointer
Venkatesh Pallipadi [Wed, 2 Jun 2010 17:01:09 +0000 (10:01 -0700)]
ACPI: Eliminate us to pm ticks conversion in common path
acpi_enter_[simple|bm] routines does us to pm tick conversion on every
idle wakeup and the value is only used in /proc/acpi display. We can
store the time in us and convert it into pm ticks before printing instead and
avoid the conversion in the common path.
Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Zhao Yakui [Wed, 2 Jun 2010 03:04:09 +0000 (11:04 +0800)]
ACPI: Fix the incorrect calculation about C-state idle time
The C-state idle time is not calculated correctly, which will return the wrong
residency time in C-state. It will have the following effects:
1. The system can't choose the deeper C-state when it is idle next time.
Of course the system power is increased. E.g. On one server machine about 40W
idle power is increased.
2. The powertop shows that it will stay in C0 running state about 95% time
although the system is idle at most time.
2.6.35-rc1 regression caused-by:
2da513f582a96c053aacc2c92873978d2ea7abff
(ACPI: Minor cleanup eliminating redundant PMTIMER_TICKS to NS conversion)
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reported-by: Yu Zhidong <zhidong.yu@intel.com>
Tested-by: Yu Zhidong <zhidong.yu@intel.com>
Acked-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Alex Elder [Fri, 4 Jun 2010 18:22:30 +0000 (13:22 -0500)]
Merge branch 'master' into for-linus
Linus Torvalds [Fri, 4 Jun 2010 16:48:03 +0000 (09:48 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: hda-intel - fix wallclk variable update and condition
ALSA: asihpi - Fix uninitialized variable
ALSA: hda: Use LPIB for ASUS M2V
usb/gadget: Replace the old USB audio FU definitions in f_audio.c
ASoC: MX31ads sound support should depend on MACH_MX31ADS_WM1133_EV1
ASoC: Add missing Kconfig entry for Phytec boards
ALSA: usb-audio: export UAC2 clock selectors as mixer controls
ALSA: usb-audio: clean up find_audio_control_unit()
ALSA: usb-audio: add UAC2 sepecific Feature Unit controls
ALSA: usb-audio: unify constants from specification
ALSA: usb-audio: parse clock topology of UAC2 devices
ALSA: usb-audio: fix selector unit string index accessor
include/linux/usb/audio-v2.h: add more UAC2 details
ALSA: usb-audio: support partially write-protected UAC2 controls
ALSA: usb-audio: UAC2: clean up parsing of bmaControls
ALSA: hda: Use LPIB for another mainboard
ALSA: hda: Use mb31 quirk for an iMac model
ALSA: hda: Use LPIB for an ASUS device
Mike Snitzer [Tue, 25 May 2010 17:15:15 +0000 (13:15 -0400)]
block: make blk_init_free_list and elevator_init idempotent
blk_init_allocated_queue_node may fail and the caller _could_ retry.
Accommodate the unlikely event that blk_init_allocated_queue_node is
called on an already initialized (possibly partially) request_queue.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Mike Snitzer [Thu, 3 Jun 2010 17:34:52 +0000 (11:34 -0600)]
block: avoid unconditionally freeing previously allocated request_queue
On blk_init_allocated_queue_node failure, only free the request_queue if
it is wasn't previously allocated outside the block layer
(e.g. blk_init_queue_node was blk_init_allocated_queue_node caller).
This addresses an interface bug introduced by the following commit:
01effb0 block: allow initialization of previously allocated
request_queue
Otherwise the request_queue may be free'd out from underneath a caller
that is managing the request_queue directly (e.g. caller uses
blk_alloc_queue + blk_init_allocated_queue_node).
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Ping Cheng [Fri, 4 Jun 2010 05:10:21 +0000 (22:10 -0700)]
Input: wacom - add Cintiq 21UX2 and Intuos4 WL
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Linus Torvalds [Thu, 3 Jun 2010 22:48:15 +0000 (15:48 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
libata: implement on-demand HPA unlocking
libata: use the enlarged capacity after late HPA unlock
SCSI: implement sd_unlock_native_capacity()
libata-sff: trivial corrections to Kconfig help text
sata_nv: don't diddle with nIEN on mcp55
sata_via: magic vt6421 fix for transmission problems w/ WD drives
Linus Torvalds [Thu, 3 Jun 2010 22:47:51 +0000 (15:47 -0700)]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched, trace: Fix sched_switch() prev_state argument
sched: Fix wake_affine() vs RT tasks
sched: Make sure timers have migrated before killing the migration_thread
Linus Torvalds [Thu, 3 Jun 2010 22:47:22 +0000 (15:47 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, smpboot: Fix cores per node printing on boot
x86/amd-iommu: Fall back to GART if initialization fails
x86/amd-iommu: Fix crash when request_mem_region fails
x86/mm: Remove unused DBG() macro
arch/x86/kernel: Add missing spin_unlock
Linus Torvalds [Thu, 3 Jun 2010 22:46:37 +0000 (15:46 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/macio: Fix probing of macio devices by using the right of match table
agp/uninorth: Fix oops caused by flushing too much
powerpc/pasemi: Update MAINTAINERS file
powerpc/cell: Fix integer constant warning
powerpc/kprobes: Remove resume_execution() in kprobes
powerpc/macio: Don't dereference pointer before null check
Linus Torvalds [Thu, 3 Jun 2010 22:46:09 +0000 (15:46 -0700)]
Merge branch 'for-linus/bugfixes' of git://xenbits.xensource.com/people/ianc/linux-2.6
* 'for-linus/bugfixes' of git://xenbits.xensource.com/people/ianc/linux-2.6:
xen: avoid allocation causing potential swap activity on the resume path
xen: ensure timer tick is resumed even on CPU driving the resume
Linus Torvalds [Thu, 3 Jun 2010 22:45:26 +0000 (15:45 -0700)]
Merge branch 'perf-fixes-for-linus-2' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf: Fix crash in swevents
perf buildid-list: Fix --with-hits event processing
perf scripts python: Give field dict to unhandled callback
perf hist: fix objdump output parsing
perf-record: Check correct pid when forking
perf: Do the comm inheritance per thread in event__process_task
perf: Use event__process_task from perf sched
perf: Process comm events by tid
blktrace: Fix new kernel-doc warnings
perf_events: Fix unincremented buffer base on partial copy
perf_events: Fix event scheduling issues introduced by transactional API
perf_events, trace: Fix perf_trace_destroy(), mutex went missing
perf_events, trace: Fix probe unregister race
perf_events: Fix races in group composition
perf_events: Fix races and clean up perf_event and perf_mmap_data interaction
Linus Torvalds [Thu, 3 Jun 2010 22:45:03 +0000 (15:45 -0700)]
Merge branch 'virtio' of git://git./linux/kernel/git/rusty/linux-2.6-for-linus
* 'virtio' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
virtio: console: Fix crash when port is unplugged and blocked for write
virtio: console: Fix crash when hot-unplugging a port and read is blocked
virtio-blk: fix minimum number of S/G elements
Linus Torvalds [Thu, 3 Jun 2010 22:44:43 +0000 (15:44 -0700)]
Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
i2c: Remove all i2c_set_clientdata(client, NULL) in drivers
i2c/busses: Move two drivers to embedded section
i2c: Rename i2c_check_addr to i2c_check_addr_busy
i2c: Document reserved I2C addresses
i2c: Check for address validity on client registration
i2c: Share the I2C device presence detection code
Documentation/i2c: Checkpatch cleanup
Linus Torvalds [Thu, 3 Jun 2010 22:42:21 +0000 (15:42 -0700)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: crypto4xx - Fix build breakage
n2_crypto: Plumb fallback ahash requests properly.
n2_crypto: Fix MAU kmem_cache name.
n2_crypto: Fix build after of_device/of_platform_driver changes.
David S. Miller [Thu, 3 Jun 2010 19:30:58 +0000 (12:30 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6
Peter Zijlstra [Thu, 3 Jun 2010 09:21:20 +0000 (11:21 +0200)]
perf: Fix crash in swevents
Frederic reported that because swevents handling doesn't disable IRQs
anymore, we can get a recursion of perf_adjust_period(), once from
overflow handling and once from the tick.
If both call ->disable, we get a double hlist_del_rcu() and trigger
a LIST_POISON2 dereference.
Since we don't actually need to stop/start a swevent to re-programm
the hardware (lack of hardware to program), simply nop out these
callbacks for the swevent pmu.
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <
1275557609.27810.35218.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Linus Torvalds [Thu, 3 Jun 2010 14:20:28 +0000 (07:20 -0700)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: fix page refcount leak
Linus Torvalds [Thu, 3 Jun 2010 14:19:45 +0000 (07:19 -0700)]
Merge branch 'drm-linus' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (41 commits)
drm/radeon/kms: make sure display hw is disabled when suspending
drm/vmwgfx: Allow userspace to change default layout. Bump minor.
drm/vmwgfx: Fix framebuffer modesetting
drm/vmwgfx: Fix vga save / restore with display topology.
vgaarb: use MIT license
vgaarb: convert pr_devel() to pr_debug()
drm: fix typos in Linux DRM Developer's Guide
drm/radeon/kms/pm: voltage fixes
drm/radeon/kms/pm: radeon_set_power_state fixes
drm/radeon/kms/pm: patch default power state with default clocks/voltages on r6xx+
drm/radeon/kms/pm: enable SetVoltage on r7xx/evergreen
drm/radeon/kms/pm: add support for SetVoltage cmd table (V2)
drm/radeon/kms/evergreen: add initial CS parser
drm/kms: disable/enable poll around switcheroo on/off
drm/nouveau: fixup confusion over which handle the DSM is hanging off.
drm/nouveau: attempt to get bios from ACPI v3
drm/nv50: cast IGP memory location to u64 before shifting
drm/ttm: Fix ttm_page_alloc.c
drm/ttm: Fix cached TTM page allocation.
drm/vmwgfx: Remove some leftover debug messages.
...
Linus Torvalds [Thu, 3 Jun 2010 14:17:31 +0000 (07:17 -0700)]
Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6
* 'merge' of git://git.secretlab.ca/git/linux-2.6:
of/powerpc: fix fsl_msi device node pointer
of/watchdog: gef_wdt.c: fix build breakage
of/edac: fix build breakage in drivers
of/net: fs_enet/mii-bitbang.c: fix build breakage
of/usb: fsl_qe_udc.c: fix build breakage
of/crypto: crypto4xx_core.c: fix build breakage
of/dma: fix build breakage in ppc4xx adma driver
of/mtd: nand: fix build breakage in drivers
of/video: fix build breakage in FB drivers
of/pcmcia: m8xx_pcmcia.c: Fix build failures
of/rtc: rtc-mpc5121.c: Fix build failures
of/dma: mpc512x_dma.c: Fix build failures
of/mtd/nand: mpc5121_nfc.c: Fix build failures
of/spi: mpc512x_psc_spi.c: Fix build failures
watchdog: Fix build failure with OF changes
of/spi: Fix build failure on spi_ppc4xx.c
of/usb: fix build error due to of_node pointer move
of/powerpc: fix 85xx RapidIO device node pointer
Amit Shah [Thu, 27 May 2010 07:54:40 +0000 (13:24 +0530)]
virtio: console: Fix crash when port is unplugged and blocked for write
When a program that has a virtio port opened and blocked for a write
operation, a port hot-unplug event will later led to a crash when
SIGTERM was sent to the program. Fix that.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Amit Shah [Thu, 27 May 2010 07:54:39 +0000 (13:24 +0530)]
virtio: console: Fix crash when hot-unplugging a port and read is blocked
When removing a port we don't check if a program was blocked for read.
This leads to a crash when SIGTERM is sent to the program after
hot-unplugging the port.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Christoph Hellwig [Tue, 25 May 2010 12:17:54 +0000 (14:17 +0200)]
virtio-blk: fix minimum number of S/G elements
We need at least one S/G element to operate properly, as does the block
layer which increments it to one anyway. We hit this due to a qemu
bug which advertises a sg_elements of 0 under some circumstances.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (tweaked logic)
Jens Axboe [Thu, 3 Jun 2010 12:54:39 +0000 (14:54 +0200)]
pipe: change /proc/sys/fs/pipe-max-pages to byte sized interface
This changes the interface to be based on bytes instead. The API
matches that of F_SETPIPE_SZ in that it rounds up the passed in
size so that the resulting page array is a power-of-2 in size.
The proc file is renamed to /proc/sys/fs/pipe-max-size to
reflect this change.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Jens Axboe [Thu, 3 Jun 2010 10:45:28 +0000 (12:45 +0200)]
pipe: change the privilege required for growing a pipe beyond system max
Change it to CAP_SYS_RESOURCE, as that more accurately models what
we want to control.
Suggested-by: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Jens Axboe [Thu, 3 Jun 2010 10:44:30 +0000 (12:44 +0200)]
pipe: adjust minimum pipe size to 1 page
We don't need to pages to guarantee the POSIX requirement
that upto a page size write must be atomic to an empty
pipe.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Jeff Kirsher [Wed, 2 Jun 2010 12:44:05 +0000 (12:44 +0000)]
ixgbe: return IXGBE_ERR_RAR_INDEX when out of range
Based on original patch from Shirley Ma <xma@us.ibm.com>
Return IXGBE_ERR_RAR_INDEX when RAR index is out of range, instead of
returning IXGBE_SUCCESS.
CC: Shirley Ma <xma@us.ibm.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Changli Gao [Wed, 2 Jun 2010 04:55:02 +0000 (04:55 +0000)]
act_pedit: access skb->data safely
access skb->data safely
we should use skb_header_pointer() and skb_store_bits() to access skb->data to
handle small or non-linear skbs.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
----
net/sched/act_pedit.c | 24 ++++++++++++++----------
1 file changed, 14 insertions(+), 10 deletions(-)
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Wed, 2 Jun 2010 10:39:56 +0000 (10:39 +0000)]
sfc: Store port number in net_device::dev_id
This exposes the port number to userland through sysfs.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roland Dreier [Wed, 2 Jun 2010 10:36:53 +0000 (10:36 +0000)]
epic100: Test __BIG_ENDIAN instead of (non-existent) CONFIG_BIG_ENDIAN
Probably no one has used this driver on big-endian systems, since it was
setting up descriptor swapping if CONFIG_BIG_ENDIAN is set, which it
never is, since that symbol is not mentioned anywhere else in the kernel
source. Switch this test to a check for __BIG_ENDIAN so it has a chance
at working.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Thu, 3 Jun 2010 00:05:35 +0000 (00:05 +0000)]
tehuti: return -EFAULT on copy_to_user errors
copy_to_user() returns the number of bytes remaining but we want to
return a negative error code here.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Wed, 2 Jun 2010 23:56:13 +0000 (23:56 +0000)]
isdn/kcapi: return -EFAULT on copy_from_user errors
copy_from_user() returns the number of bytes remaining but we should
return -EFAULT here. The error code gets returned to the user. Both
old_capi_manufacturer() and capi20_manufacturer() had other places
that already returned -EFAULT so this won't break anything.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Wed, 2 Jun 2010 13:43:15 +0000 (13:43 +0000)]
e1000e: change logical negate to bitwise
The bitwise negate is intended here. With the logical negate the
condition is always false.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Tue, 1 Jun 2010 11:32:43 +0000 (11:32 +0000)]
sfc: Get port number from CS_PORT_NUM, not PCI function number
A single shared memory region used to communicate with firmware is
mapped into both PCI PFs of the SFC9020 and SFL9021. Drivers must be
able to identify which port they are addressing in order to use the
correct sub-region. Currently we use the PCI function number, but the
PCI address may be virtualised. Use the CS_PORT_NUM register field
defined for just this purpose.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfram Sang [Thu, 3 Jun 2010 09:33:58 +0000 (11:33 +0200)]
i2c: Remove all i2c_set_clientdata(client, NULL) in drivers
I2C drivers can use the clientdata-pointer to point to private data. As I2C
devices are not really unregistered, but merely detached from their driver, it
used to be the drivers obligation to clear this pointer during remove() or a
failed probe(). As a couple of drivers forgot to do this, it was agreed that it
was cleaner if the i2c-core does this clearance when appropriate, as there is
no guarantee for the lifetime of the clientdata-pointer after remove() anyhow.
This feature was added to the core with commit
e4a7b9b04de15f6b63da5ccdd373ffa3057a3681 to fix the faulty drivers.
As there is no need anymore to clear the clientdata-pointer, remove all current
occurrences in the drivers to simplify the code and prevent confusion.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Wolfram Sang [Thu, 3 Jun 2010 09:33:56 +0000 (11:33 +0200)]
i2c/busses: Move two drivers to embedded section
And fix a typo while we are here
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Thu, 3 Jun 2010 09:33:55 +0000 (11:33 +0200)]
i2c: Rename i2c_check_addr to i2c_check_addr_busy
Otherwise it's not clear what it is checking.
Also move the function to save a forward declaration.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Thu, 3 Jun 2010 09:33:53 +0000 (11:33 +0200)]
i2c: Document reserved I2C addresses
Move strict I2C address validity check to a single function, and
document the reserved I2C addresses there.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Jean Delvare [Thu, 3 Jun 2010 09:33:52 +0000 (11:33 +0200)]
i2c: Check for address validity on client registration
Do basic address validity checks when a client is being registered. We
already had checks in place for devices which are being detected, but
not for devices which are simply instantiated.
This is a very basic check. We don't want to do strict checking here
because some devices are known to infringe the I2C address constraints
(e.g. IR receivers at 7-bit address 0x7a while this value is
supposedly reserved for 10-bit addresses.) So we assume the caller
knows what it is doing.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Matthieu Castet <castet.matthieu@free.fr>
Jean Delvare [Thu, 3 Jun 2010 09:33:51 +0000 (11:33 +0200)]
i2c: Share the I2C device presence detection code
Use the same I2C device presence detection code for legacy and new
device detection functions. This is more consistent and makes the code
smaller.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Matthieu Castet <castet.matthieu@free.fr>
Andrea Gelmini [Thu, 3 Jun 2010 09:33:50 +0000 (11:33 +0200)]
Documentation/i2c: Checkpatch cleanup
Remove all trailing whitespace in Documentation/i2c.
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Ian Campbell [Tue, 25 May 2010 09:45:35 +0000 (10:45 +0100)]
xen: avoid allocation causing potential swap activity on the resume path
Since the device we are resuming could be the device containing the
swap device we should ensure that the allocation cannot cause
IO.
On resume, this path is triggered when the running system tries to
continue using its devices. If it cannot then the resume will fail;
to try to avoid this we let it dip into the emergency pools.
The majority of these changes were made when linux-2.6.18-xen.hg
changeset
e8b49cfbdac0 was ported upstream in
a144ff09bc52ef3f3684ed23eadc9c7c0e57b3aa but somehow this hunk was
dropped.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Stable Kernel <stable@kernel.org> # .32.x
Ian Campbell [Wed, 19 May 2010 15:19:25 +0000 (16:19 +0100)]
xen: ensure timer tick is resumed even on CPU driving the resume
The core suspend/resume code is run from stop_machine on CPU0 but
parts of the suspend/resume machinery (including xen_arch_resume) are
run on whichever CPU happened to schedule the xenwatch kernel thread.
As part of the non-core resume code xen_arch_resume is called in order
to restart the timer tick on non-boot processors. The boot processor
itself is taken care of by core timekeeping code.
xen_arch_resume uses smp_call_function which does not call the given
function on the current processor. This means that we can end up with
one CPU not receiving timer ticks if the xenwatch thread happened to
be scheduled on CPU > 0.
Use on_each_cpu instead of smp_call_function to ensure the timer tick
is resumed everywhere.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Stable Kernel <stable@kernel.org> # .32.x
Richard Kennedy [Thu, 27 May 2010 09:22:28 +0000 (10:22 +0100)]
gconfig: fix build failure on fedora 13
Making gconfig fails on fedora 13 as the linker cannot resolve dlsym.
Adding libdl to the link command fixes this.
make shows this error :-
/usr/bin/ld: scripts/kconfig/kconfig_load.o: undefined reference to symbol 'dlsym@@GLIBC_2.2.5'
/usr/bin/ld: note: 'dlsym@@GLIBC_2.2.5' is defined in DSO /lib64/libdl.so.2 so try adding it to the linker command line
/lib64/libdl.so.2: could not read symbols: Invalid operation
tested on x86_64 fedora 13.
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Anatolij Gustschin [Thu, 3 Jun 2010 06:53:49 +0000 (16:53 +1000)]
crypto: crypto4xx - Fix build breakage
Fixes build error caused by the OF device_node
pointer being moved into struct device
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Christoph Hellwig [Thu, 3 Jun 2010 06:22:29 +0000 (16:22 +1000)]
xfs: improve xfs_isilocked
Use rwsem_is_locked to make the assertations for shared locks work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Christoph Hellwig [Thu, 3 Jun 2010 06:22:29 +0000 (16:22 +1000)]
xfs: skip writeback from reclaim context
Allowing writeback from reclaim context causes massive problems with stack
overflows as we can call into the writeback code which tends to be a heavy
stack user both in the generic code and XFS from random contexts that
perform memory allocations.
Follow the example of btrfs (and in slightly different form ext4) and refuse
to write out data from reclaim context. This issue should really be handled
by the VM so that we can tune better for this case, but until we get it
sorted out there we have to hack around this in each filesystem with a
complex writeback path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Christoph Hellwig [Thu, 3 Jun 2010 06:22:29 +0000 (16:22 +1000)]
xfs: remove done roadmap item from xfs-delayed-logging-design.txt
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Dave Chinner [Thu, 3 Jun 2010 06:22:29 +0000 (16:22 +1000)]
xfs: fix race in inode cluster freeing failing to stale inodes
When an inode cluster is freed, it needs to mark all inodes in memory as
XFS_ISTALE before marking the buffer as stale. This is eeded because the inodes
have a different life cycle to the buffer, and once the buffer is torn down
during transaction completion, we must ensure none of the inodes get written
back (which is what XFS_ISTALE does).
Unfortunately, xfs_ifree_cluster() has some bugs that lead to inodes not being
marked with XFS_ISTALE. This shows up when xfs_iflush() is called on these
inodes either during inode reclaim or tail pushing on the AIL. The buffer is
read back, but no longer contains inodes and so triggers assert failures and
shutdowns. This was reproducable with at run.dbench10 invocation from xfstests.
There are two main causes of xfs_ifree_cluster() failing. The first is simple -
it checks in-memory inodes it finds in the per-ag icache to see if they are
clean without holding the flush lock. if they are clean it skips them
completely. However, If an inode is flushed delwri, it will
appear clean, but is not guaranteed to be written back until the flush lock has
been dropped. Hence we may have raced on the clean check and the inode may
actually be dirty. Hence always mark inodes found in memory stale before we
check properly if they are clean.
The second is more complex, and makes the first problem easier to hit.
Basically the in-memory inode scan is done with full knowledge it can be racing
with inode flushing and AIl tail pushing, which means that inodes that it can't
get the flush lock on might not be attached to the buffer after then in-memory
inode scan due to IO completion occurring. This is actually documented in the
code as "needs better interlocking". i.e. this is a zero-day bug.
Effectively, the in-memory scan must be done while the inode buffer is locked
and Io cannot be issued on it while we do the in-memory inode scan. This
ensures that inodes we couldn't get the flush lock on are guaranteed to be
attached to the cluster buffer, so we can then catch all in-memory inodes and
mark them stale.
Now that the inode cluster buffer is locked before the in-memory scan is done,
there is no need for the two-phase update of the in-memory inodes, so simplify
the code into two loops and remove the allocation of the temporary buffer used
to hold locked inodes across the phases.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Wolfram Sang [Thu, 3 Jun 2010 04:03:46 +0000 (06:03 +0200)]
of/powerpc: fix fsl_msi device node pointer
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Alex Deucher [Wed, 2 Jun 2010 16:08:41 +0000 (12:08 -0400)]
drm/radeon/kms: make sure display hw is disabled when suspending
Disable the display hw when suspending.
Should fix bug:
https://bugzilla.redhat.com/show_bug.cgi?id=522393
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jakob Bornecrantz [Tue, 1 Jun 2010 09:54:20 +0000 (11:54 +0200)]
drm/vmwgfx: Allow userspace to change default layout. Bump minor.
The host may change the layout and, since the change is
communicated to the master, the master needs a way to
communicate the change to the kernel driver.
The minor version number is bumped to advertize the
availability of this feature.
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jakob Bornecrantz [Tue, 1 Jun 2010 09:38:16 +0000 (11:38 +0200)]
drm/vmwgfx: Fix framebuffer modesetting
Must set SVGA_NUM_REG_GUEST_DISPLAY before setting up the display information.
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Thomas Hellstrom [Tue, 1 Jun 2010 09:38:17 +0000 (11:38 +0200)]
drm/vmwgfx: Fix vga save / restore with display topology.
vga save / restore previously didn't handle the display topology case.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tiago Vignatti [Mon, 24 May 2010 15:24:31 +0000 (18:24 +0300)]
vgaarb: use MIT license
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Cc: Henry Zhao <Henry.Zhao@Sun.COM>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tiago Vignatti [Mon, 24 May 2010 15:24:30 +0000 (18:24 +0300)]
vgaarb: convert pr_devel() to pr_debug()
We want to be able to use CONFIG_DYNAMIC_DEBUG in arbiter code, switch
the few existing pr_devel() calls to pr_debug().
Also, add one more debug information regarding decoding count.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Nicolas Kaiser [Fri, 28 May 2010 05:33:49 +0000 (07:33 +0200)]
drm: fix typos in Linux DRM Developer's Guide
A few typos in the DRM Developer's Guide.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Acked-by: Jesse Barnes <jesse.barnes@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 27 May 2010 21:01:42 +0000 (17:01 -0400)]
drm/radeon/kms/pm: voltage fixes
- Enable GPIO voltage for non pm modes as well so resetting
the default voltage works.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 27 May 2010 21:01:41 +0000 (17:01 -0400)]
drm/radeon/kms/pm: radeon_set_power_state fixes
- wait for vbl for both profile and dynpm
- unify profile and dynpm code paths more
- call pm_misc before of after clocks to make
sure voltage is changed in the proper order.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 27 May 2010 21:01:40 +0000 (17:01 -0400)]
drm/radeon/kms/pm: patch default power state with default clocks/voltages on r6xx+
The default power state does not always match the default clocks and voltage
for a particular card. The information in the firmware info table is correct
and should be used in preference to the info the default power state.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 28 May 2010 23:35:01 +0000 (19:35 -0400)]
drm/radeon/kms/pm: enable SetVoltage on r7xx/evergreen
I missed these in the r6xx commit.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 27 May 2010 23:25:54 +0000 (19:25 -0400)]
drm/radeon/kms/pm: add support for SetVoltage cmd table (V2)
- This enables voltage adjustment on r6xx+ and certain
r5xx asics.
- Voltage drop support is already available for most
r1xx-r5xx asics.
V2: endian fix for voltage table.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Anatolij Gustschin [Thu, 3 Jun 2010 01:30:31 +0000 (03:30 +0200)]
of/watchdog: gef_wdt.c: fix build breakage
Fixes build error caused by the OF device_node
pointer being moved into struct device
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Anatolij Gustschin [Thu, 3 Jun 2010 01:17:42 +0000 (03:17 +0200)]
of/edac: fix build breakage in drivers
Fixes build errors in EDAC drivers caused by the OF
device_node pointer being moved into struct device
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Anatolij Gustschin [Thu, 3 Jun 2010 01:06:54 +0000 (03:06 +0200)]
of/net: fs_enet/mii-bitbang.c: fix build breakage
Fixes build error caused by the OF device_node
pointer being moved into struct device
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Anatolij Gustschin [Thu, 3 Jun 2010 00:59:55 +0000 (02:59 +0200)]
of/usb: fsl_qe_udc.c: fix build breakage
Fixes build error caused by the OF device_node
pointer being moved into struct device
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Anatolij Gustschin [Thu, 3 Jun 2010 00:53:18 +0000 (02:53 +0200)]
of/crypto: crypto4xx_core.c: fix build breakage
Fixes build error caused by the OF device_node
pointer being moved into struct device
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Anatolij Gustschin [Thu, 3 Jun 2010 00:46:37 +0000 (02:46 +0200)]
of/dma: fix build breakage in ppc4xx adma driver
Fixes build error caused by the OF device_node
pointer being moved into struct device
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Anatolij Gustschin [Thu, 3 Jun 2010 00:37:17 +0000 (02:37 +0200)]
of/mtd: nand: fix build breakage in drivers
Fixes build errors in drivers caused by the OF device_node
pointer being moved into struct device
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Anatolij Gustschin [Thu, 3 Jun 2010 00:20:44 +0000 (02:20 +0200)]
of/video: fix build breakage in FB drivers
Fixes build errors in a number of framebuffer drivers caused
by the OF device_node pointer being moved into struct device
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Anatolij Gustschin [Wed, 2 Jun 2010 23:38:57 +0000 (01:38 +0200)]
of/pcmcia: m8xx_pcmcia.c: Fix build failures
Fixes build errors caused by the:
- OF device_node pointer being moved into struct device
- typo in match_table field in the struct device_driver
(which shoud be of_match_table)
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Theodore Ts'o [Thu, 3 Jun 2010 02:04:39 +0000 (22:04 -0400)]
ext4: Make sure the MOVE_EXT ioctl can't overwrite append-only files
Dan Roseberg has reported a problem with the MOVE_EXT ioctl. If the
donor file is an append-only file, we should not allow the operation
to proceed, lest we end up overwriting the contents of an append-only
file.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Mikulas Patocka [Wed, 2 Jun 2010 15:09:04 +0000 (11:09 -0400)]
Fix colors for Mach64
Use the same color-calculating algorithm as in atyfb_imageblit in this
driver or in generic cfb_fillrect.
This patch fixes bad colors when using an accelerator in 15-bit and
16-bit modes.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Grant Likely [Wed, 2 Jun 2010 20:06:09 +0000 (14:06 -0600)]
of/rtc: rtc-mpc5121.c: Fix build failures
Fixes build errors caused by the:
- OF device_node pointer being moved into struct device
- removal of the match_table field from struct of_platform_driver
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
CC: Paul Gortmaker <p_gortmaker@yahoo.com>
CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Wolfgang Denk <wd@denx.de>
CC: Tejun Heo <tj@kernel.org>
CC: Anatolij Gustschin <agust@denx.de>
CC: rtc-linux@googlegroups.com
CC: devicetree-discuss@lists.ozlabs.org
Anatolij Gustschin [Mon, 31 May 2010 16:39:13 +0000 (18:39 +0200)]
of/dma: mpc512x_dma.c: Fix build failures
Fixes build errors caused by the:
- OF device_node pointer being moved into struct device
- removal of the match_table field from struct of_platform_driver
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>