SAFE public projects git trees. - safe/jmp/linux-2.6/log

NFS: More "sloppy" parsing problems

Specifying "port=-5" with the kernel's current mount option parser
generates "unrecognized mount option". If "sloppy" is set, this
causes the mount to succeed and use the default values; the desired
behavior is that, since this is a valid option with an invalid value,
the mount should fail, even with "sloppy."

To properly handle "sloppy" parsing, we need to distinguish between
correct options with invalid values, and incorrect options. We will
need to parse integer values by hand, therefore, and not rely on
match_token().

For instance, these must all fail with "invalid value":

port=12345678
port=-5
port=samuel

and not with "unrecognized option," as they do currently.

Thus, for the sake of match_token() we need to treat the values for
these options as strings, and do the conversion to integers using
strict_strtol().

This is basically the same solution we used for the earlier "retry="
fix (commit ecbb3845), except in this case the kernel actually has to
parse the value, rather than ignore it.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Invalid mount option values should always fail, even with "sloppy"

Ian Kent reports:

"I've noticed a couple of other regressions with the options vers
and proto option of mount.nfs(8).

The commands:

mount -t nfs -o vers=<invalid version> <server>:/<path> /<mountpoint>
mount -t nfs -o proto=<invalid proto> <server>:/<path> /<mountpoint>

both immediately fail.

But if the "-s" option is also used they both succeed with the
mount falling back to defaults (by the look of it).

In the past these failed even when the sloppy option was given, as
I think they should. I believe the sloppy option is meant to allow
the mount command to still function for mount options (for example
in shared autofs maps) that exist on other Unix implementations but
aren't present in the Linux mount.nfs(8). So, an invalid value
specified for a known mount option is different to an unknown mount
option and should fail appropriately."

See RH bugzilla 486266.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Remove unused XDR decoder functions

Clean up: Remove xdr_decode_fhstatus() and xdr_decode_fhstatus3(), now
that they are unused.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Update MNT and MNT3 reply decoding functions

Solder xdr_stream-based XDR decoding functions into the in-kernel mountd
client that are more careful about checking data types and watching for
buffer overflows. The new MNT3 decoder includes support for auth-flavor
list decoding.

The "_sz" macro for MNT3 replies was missing the size of the file handle.
I've added this back, and included the size of the auth flavor array.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: add XDR decoder for mountd version 3 auth-flavor lists

Introduce an xdr_stream-based XDR decoder that can unpack the auth-
flavor list returned in a MNT3 reply.

The nfs_mount() function's caller allocates an array, and passes the
size and a pointer to it. The decoder decodes all the flavors it can
into the array, and returns the number of decoded flavors.

If the caller is not interested in the auth flavors, it can pass a
value of zero as the size of the pre-allocated array.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: add new file handle decoders to in-kernel mountd client

Introduce xdr_stream-based XDR file handle decoders to the in-kernel
mountd client. These are more careful than the existing decoder
functions about buffer overflows and data type and range checking.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Add separate mountd status code decoders for each mountd version

Introduce data structures and xdr_stream-based decoding functions for
unmarshalling mountd status codes properly.

Mountd version 3 uses specific standard error return codes that are
not errno values and not NFS3ERR_ values.  These have a well-defined
standard mapping to local errno values.  Introduce data structures
and a decoder function that map these status codes to local errno
values properly.  This is new functionality (but not used yet).

Version 1 mountd status values are defined by RFC 1094 as UNIX error
values (errno values).  Errno values on heterogeneous systems do not
necessarily match each other.  To avoid exposing possibly incorrect
errno values to upper layers, the current XDR decoder converts all
non-zero MNT version 1 status codes to -EACCES.

The OpenGroup XNFS standard provides a mapping similar to but smaller
than the version 3 error codes.  Implement a decoder that uses the XNFS
error codes, replacing the current decoder.

For both mountd protocol versions, map unrecognized errors to -EACCES.

Finally we introduce a replacement data structure for mnt_fhstatus
at this time, which is used by the new XDR decoders.  In addition to
documenting that the status value returned by the XDR decoders is
always an errno, this new structure will be expanded in subsequent
patches.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: remove unused function in fs/nfs/mount_clnt.c

Clean up: remove xdr_encode_dirpath() now that it has been replaced.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Use xdr_stream-based XDR encoder for MNT's dirpath argument

Check the length of the supplied dirpath, and see that it fits
properly in the RPC buffer.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Clean up MNT program definitions

Clean up:  Relocate MNT program procedure number definitions to the
only file that uses them.  Relocate the version number definitions,
which are shared, to nfs.h.  Remove duplicate program number
definitions.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

lockd: Don't bother with RPC ping for NSM upcalls

Cut NSM upcall RPC traffic in half -- don't do a NULL call first.
The cases where a ping would be helpful are rare.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

lockd: Update NSM state from SM_MON replies

When rpc.statd starts up in user space at boot time, it attempts to
write the latest NSM local state number into
/proc/sys/fs/nfs/nsm_local_state.

If lockd.ko isn't loaded yet (as is the case in most configurations),
that file doesn't exist, thus the kernel's NSM state remains set to
its initial value of zero during lockd operation.

This is a problem because rpc.statd and lockd use the NSM state number
to prevent repeated lock recovery on rebooted hosts.  If lockd sends
a zero NSM state, but then a delayed SM_NOTIFY with a real NSM state
number is received, there is no way for lockd or rpc.statd to
distinguish that stale SM_NOTIFY from an actual reboot.  Thus lock
recovery could be performed after the rebooted host has already
started reclaiming locks, and those locks will be lost.

We could change /etc/init.d/nfslock so it always modprobes lockd.ko
before starting rpc.statd.  However, if lockd.ko is ever unloaded
and reloaded, we are back at square one, since the NSM state is not
preserved across an unload/reload cycle.  This may happen frequently
on clients that use automounter.  A period of NFS inactivity causes
lockd.ko to be unloaded, and the kernel loses its NSM state setting.

Instead, let's use the fact that rpc.statd plants the local system's
NSM state in every SM_MON (and SM_UNMON) reply.  lockd performs a
synchronous SM_MON upcall to the local rpc.statd _before_ sending its
first NLM request to a new remote.  This would permit rpc.statd to
provide the current NSM state to lockd, even after lockd.ko had been
unloaded and reloaded.

Note that NLMPROC_LOCK arguments are constructed before the
nsm_monitor() call, so we have to rearrange argument construction very
slightly to make this all work out.

And, the kernel appears to treat NSM state as a u32 (see struct
nlm_args and nsm_res).  Make nsm_local_state a u32 as well, to ensure
we don't get bogus comparison results.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Fix false error return from nfs_callback_up() if ipv6.ko is not available

Clear "ret" if the error return from svc_create_xprt(AF_INET6) was
-EAFNOSUPORT. Otherwise, callback start-up will succeed, but
nfs_callback_up() will return -EAFNOSUPPORT anyway, and the first
NFSv4 mount attempt after a reboot will fail.

Bug introduced by commit f738f517 in 2.6.30-rc1.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Return error code from nfs_callback_up() to user space

If the kernel cannot start the NFSv4 callback service during a mount
request, it returns -ENOMEM to user space, resulting in this message:

mount.nfs4: Cannot allocate memory

Adjust nfs_alloc_client() and nfs_get_client() to pass NFSv4 callback
start-up errors back to user space so a less mysterious error message
can be displayed by the mount command.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Do not display the setting of the "intr" mount option

The "intr" mount option has been deprecated for a while, but
/proc/mounts continues to display "nointr" whether "intr" or "nointr"
has been specified for a mount point.

Since these options do not have any effect, simply do not display
them.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: add support for splice writes

Adds support for splice writes. It effectively calls
generic_file_splice_write() to do the writes.

We need not worry about O_APPEND case as the combination of splice()
writes and O_APPEND is disallowed. This patch propagates NFS write
errors back to the caller. The number of bytes written via splice are
being added to NFSIO_NORMALWRITTENBYTES as these are effectively
cached writes.

Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Merge commit 'linux-pnfs/nfs41-for-2.6.31' into nfsv41-for-2.6.31

nfs41: Backchannel: CB_SEQUENCE validation

Validates the callback's sessionID, the slot number, and the sequence ID.
Increments the slot's sequence.

Detects replays, but simply prints a debug message (if debugging is enabled
since we don't yet implement a duplicate request cache for the backchannel.
This should not present a problem, since only idempotent callbacks are
currently implemented.

Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Backchannel: Be more obvious about the return value]
[nfs41: Backchannel: dprink in host order]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: Backchannel: New find_client_with_session()

Finds the 'struct nfs_client' that matches the server's address, major
version number, and session ID.

Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: Backchannel: Add a backchannel slot table to the session

Defines a new 'struct nfs4_slot_table' in the 'struct nfs4_session'
for use by the backchannel. Initializes, resets, and destroys the backchannel
slot table in the same manner the forechannel slot table is initialized,
reset, and destroyed.

The sequenceid for each slot in the backchannel slot table is initialized
to 0, whereas the forechannel slotid's sequenceid is set to 1.

Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: Backchannel: Refactor nfs4_init_slot_table()

Generalize nfs4_init_slot_table() so it can be used to initialize the
backchannel slot table in addition to the forechannel slot table.

Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: Backchannel: Refactor nfs4_reset_slot_table()

Generalize nfs4_reset_slot_table() so it can be used to reset the
backchannel slot table in addition to the forechannel slot table.

Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: Backchannel: update cb_sequence args and results

Change the type of cs_addr and csr_status to 'struct sockaddr' and
'__be32' since the cb_sequence processing function will use existing
functionality that expects these types.

Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: Rename rq_received to rq_reply_bytes_recvd

The 'rq_received' member of 'struct rpc_rqst' is used to track when we
have received a reply to our request. With v4.1, the backchannel
can now accept callback requests over the existing connection. Rename
this field to make it clear that it is only used for tracking reply bytes
and not all bytes received on the connection.

Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: verify CB_SEQUENCE position in callback compound

CB_SEQUENCE must appear first in the callback compound RPC.
If it is not the first operation NFS4ERR_SEQUENCE_POS must be returned.
If the first operation ni the CB_COMPOUND is not CB_SEQUENCE then
NFS4ERR_OP_NOT_IN_SESSION must be returned.

Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: refactor op preprocessing out of process_op]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: cb_sequence xdr implementation

[nfs41: get rid of READMEM and COPYMEM for callback_xdr.c]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: get rid of READ64 in callback_xdr.c]
See http://linux-nfs.org/pipermail/pnfs/2009-June/007846.html
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: cb_sequence proc implementation

Currently, just free up any referring calls information.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: fix csr_{,target}highestslotid]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: cb_sequence protocol level data structures

Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: consider minorversion in callback_xdr:process_op

Note that this patch changes the nfsv4.0 behavior also when
CONFIG_NFS_V4_1 is not defined where NFS4ERR_MINOR_VERS_MISMATCH
will be returned if the client received a CB_COMPOUND
with minorversion != 0. Previously, it would have
returned NFS4ERR_OP_ILLEGAL for CB_SEQUENCE.
(or if the server is broken and sent OP_CB_GETATTR or OP_CB_RECALL
with minorversion!=0, they would have been processed normally.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: refactor op preprocessing out of process_op]
See http://linux-nfs.org/pipermail/pnfs/2009-June/007845.html
[nfs41: define CB_NOTIFY_DEVICEID as not supported]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: callback numbers definitions

Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: decode minorversion 1 cb_compound header

decode cb_compound header conforming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26

Get rid of cb_compound_hdr_arg.callback_ident

callback_ident is not used anywhere so we shouldn't waste any memory to
store it.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: no need to break read_buf in decode_compound_hdr_arg]
See http://linux-nfs.org/pipermail/pnfs/2009-June/007844.html
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: store minorversion in cb_compound_hdr_arg

Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: Release backchannel resources associated with session

Frees the preallocated backchannel resources that are associated with
this session when the session is destroyed.

A backchannel is currently created once per session. Destroy the backchannel
only when the session is destroyed.

Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: Get the rpc_xprt * from the rpc_rqst instead of the rpc_clnt.

Obtain the rpc_xprt from the rpc_rqst so that calls and callback replies
can both use the same code path. A client needs the rpc_xprt in order
to reply to a callback.

Signed-off-by: Rahul Iyer <iyer@netapp.com>
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: Client indicates presence of NFSv4.1 callback channel.

Set the SESSION4_BACK_CHAN flag to indicate the client supports a backchannel.

Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: Setup the backchannel

The NFS v4.1 callback service has already been setup, and
rpc_xprt->serv points to the svc_serv structure describing it.
Invoke the xprt_setup_backchannel() initialization to pre-
allocate the necessary backchannel structures.

Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: change nfs4_put_session(nfs4_session**) to nfs4_destroy_session(nfs_session*)]
Signed-off-by: Alexandros Batsakis <Alexandros.Batsakis@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[moved xprt_setup_backchannel from nfs4_init_session to nfs4_init_backchannel]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: Allow NFSv4 and NFSv4.1 callback services to coexist

Tracks the nfs_callback_info for both versions, enabling the callback
service for v4 and v4.1 to run concurrently and be stopped independently
of each other.

Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: create a svc_xprt for nfs41 callback thread and use for incoming callbacks

Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: sunrpc: add a struct svc_xprt pointer to struct svc_serv for backchannel use

This svc_xprt is passed on to the callback service thread to be later used
to processes incoming svc_rqst's

Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: sunrpc: provide functions to create and destroy a svc_xprt for backchannel use

For nfs41 callbacks we need an svc_xprt to process requests coming up the
backchannel socket as rpc_rqst's that are transformed into svc_rqst's that
need a rq_xprt to be processed.

The svc_{udp,tcp}_create methods are too heavy for this job as svc_create_socket
creates an actual socket to listen on while for nfs41 we're "reusing" the
fore channel's socket.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: Implement NFSv4.1 callback service process.

nfs41_callback_up() initializes the necessary queues and creates the new
nfs41_callback_svc thread.  This thread executes the callback service which
waits for requests to arrive on the svc_serv->sv_cb_list.

NFS41_BC_MIN_CALLBACKS is set to 1 because we expect callbacks to not
cause substantial latency.

The actual processing of the callback will be implemented as a separate patch.

There is only one NFSv4.1 callback service.  The first caller of
nfs4_callback_up() creates the service, subsequent callers increment a
reference count on the service.  The service is destroyed when the last
caller invokes nfs_callback_down().

The transport needs to hold a reference to the callback service in order
to invoke it during callback processing.  Currently this reference is only
obtained when the service is first created.  This is incorrect, since
subsequent registrations for other transports will leave the xprt->serv
pointer uninitialized, leading to an oops when a callback arrives on
the "unreferenced" transport.

This patch fixes the problem by ensuring that a reference to the service
is saved in xprt->serv, either because the service is created by this
invocation to nfs4_callback_up() or by a prior invocation.

Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Add a reference to svc_serv during callback service bring up]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Type check arguments of nfs_callback_up]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: save svc_serv in nfs_callback_info]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Removal of ugly #ifdefs]
[nfs41: Update to removal of ugly #ifdefs]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: Backchannel bc_svc_process()

Implement the NFSv4.1 backchannel service. Invokes the common callback
processing logic svc_process_common() to authenticate the call and
dispatch the appropriate NFSv4.1 XDR decoder and operation procedure.
It then invokes bc_send() to send the reply over the same connection.
bc_send() is implemented in a separate patch.

At this time there is no slot validation or reply cache handling.

[nfs41: Preallocate rpc_rqst receive buffer for handling callbacks]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Move bc_svc_process() declaration to correct patch]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: Refactor svc_process()

net/sunrpc/svc.c:svc_process() is used by the NFSv4 callback service
to process RPC requests arriving over connections initiated by the
server. NFSv4.1 supports callbacks over the backchannel on connections
initiated by the client. This patch refactors svc_process() so that
common code can also be used by the backchannel.

Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: Backchannel callback service helper routines

Executes the backchannel task on the RPC state machine using
the existing open connection previously established by the client.

Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
nfs41: Add bc_svc.o to sunrpc Makefile.

[nfs41: bc_send() does not need to be exported outside RPC module]
[nfs41: xprt_free_bc_request() need not be exported outside RPC module]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Update copyright]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: Add backchannel processing support to RPC state machine

Adds rpc_run_bc_task() which is called by the NFS callback service to
process backchannel requests.  It performs similar work to rpc_run_task()
though "schedules" the backchannel task to be executed starting at the
call_trasmit state in the RPC state machine.

It also introduces some miscellaneous updates to the argument validation,
call_transmit, and transport cleanup functions to take into account
that there are now forechannel and backchannel tasks.

Backchannel requests do not carry an RPC message structure, since the
payload has already been XDR encoded using the existing NFSv4 callback
mechanism.

Introduce a new transmit state for the client to reply on to backchannel
requests.  This new state simply reserves the transport and issues the
reply.  In case of a connection related error, disconnects the transport and
drops the reply.  It requires the forechannel to re-establish the connection
and the server to retransmit the request, as stated in NFSv4.1 section
2.9.2 "Client and Server Transport Behavior".

Note: There is no need to loop attempting to reserve the transport.  If EAGAIN
is returned by xprt_prepare_transmit(), return with tk_status == 0,
setting tk_action to call_bc_transmit.  rpc_execute() will invoke it again
after the task is taken off the sleep queue.

[nfs41: rpc_run_bc_task() need not be exported outside RPC module]
[nfs41: New call_bc_transmit RPC state]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Backchannel: No need to loop in call_bc_transmit()]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[rpc_count_iostats incorrectly exits early]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Convert rpc_reply_expected() to inline function]
[Remove unnecessary BUG_ON()]
[Rename variable]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

NFSv4/NLM: Push file locking BKL dependencies down into the NLM layer

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: Ensure we always hold the BKL when dereferencing inode->i_flock

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4: Handle more errors when recovering open file and locking state

It is possible for servers to return NFS4ERR_BAD_STATEID when
the state management code is recovering locks or is reclaiming state when
returning a delegation. Ensure that we handle that case.
While we're at it, add in handlers for NFS4ERR_STALE,
NFS4ERR_ADMIN_REVOKED, NFS4ERR_OPENMODE, NFS4ERR_DENIED and
NFS4ERR_STALE_STATEID, since the protocol appears to allow for them too.

Also handle ENOMEM...

Finally, rather than add new NFSv4.0-specific errors and error handling into
the generic delegation code, move that open file and locking state error
handling into the NFSv4 layer.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4: Move error handling out of the delegation generic code

The NFSv4 delegation recovery code is required by the protocol to handle
more errors. Rather than add NFSv4.0 specific errors into 'generic'
delegation code, we should move the error handling into the NFSv4 layer.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4: Fix the 'nolock' option regression

NFSv4 should just ignore the 'nolock' option. It is an NFSv2/v3 thing...
This fixes the Oops in http://bugzilla.kernel.org/show_bug.cgi?id=13330

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

SUNRPC: Fix a missing "break" option in xs_tcp_setup_socket()

In the case of -EADDRNOTAVAIL and/or unhandled connection errors, we want
to get rid of the existing socket and retry immediately, just as the
comment says. Currently we end up sleeping for a minute, due to the missing
"break" statement.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: New xs_tcp_read_data()

Handles RPC replies and backchannel callbacks.  Traditionally the NFS
client has expected only RPC replies on its open connections.  With
NFSv4.1, callbacks can arrive over an existing open connection.

This patch refactors the old xs_tcp_read_request() into an RPC reply handler:
xs_tcp_read_reply(), a new backchannel callback handler: xs_tcp_read_callback(),
and a common routine to read the data off the transport: xs_tcp_read_common().
The new xs_tcp_read_callback() queues callback requests onto a queue where
the callback service (a separate thread) is listening for the processing.

This patch incorporates work and suggestions from Rahul Iyer (iyer@netapp.com)
and Benny Halevy (bhalevy@panasas.com).

xs_tcp_read_callback() drops the connection when the number of expected
callbacks is exceeded.  Use xprt_force_disconnect(), ensuring tasks on
the pending queue are awaken on disconnect.

[nfs41: Keep track of RPC call/reply direction with a flag]
[nfs41: Preallocate rpc_rqst receive buffer for handling callbacks]
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: sunrpc: xs_tcp_read_callback() should use xprt_force_disconnect()]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Moves embedded #ifdefs into #ifdef function blocks]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: New include/linux/sunrpc/bc_xprt.h

Contains prototype for backchannel helper routines.

Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: xprt_setup_backchannel v4.0 only inline]
Fix compile error when CONFIG_NFS_V4_1 is not set.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Update Copyright notice and fix formatting]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: New backchannel helper routines

This patch introduces support to setup the callback xprt on the client side.
It allocates/ destroys the preallocated memory structures used to process
backchannel requests.

At setup time, xprt_setup_backchannel() is invoked to allocate one or
more rpc_rqst structures and substructures.  This ensures that they
are available when an RPC callback arrives.  The rpc_rqst structures
are maintained in a linked list attached to the rpc_xprt structure.
We keep track of the number of allocations so that they can be correctly
removed when the channel is destroyed.

When an RPC callback arrives, xprt_alloc_bc_request() is invoked to
obtain a preallocated rpc_rqst structure.  An rpc_xprt structure is
returned, and its RPC_BC_PREALLOC_IN_USE bit is set in
rpc_xprt->bc_flags.  The structure is removed from the the list
since it is now in use, and it will be later added back when its
user is done with it.

After the RPC callback replies, the rpc_rqst structure is returned
by invoking xprt_free_bc_request().  This clears the
RPC_BC_PREALLOC_IN_USE bit and adds it back to the list, allowing it
to be reused by a subsequent RPC callback request.

To be consistent with the reception of RPC messages, the backchannel requests
should be placed into the 'struct rpc_rqst' rq_rcv_buf, which is then in turn
copied to the 'struct rpc_rqst' rq_private_buf.

[nfs41: Preallocate rpc_rqst receive buffer for handling callbacks]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Update copyright notice and explain page allocation]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: Initialize new rpc_xprt callback related fields

Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: client callback structures

Adds new list of rpc_xprt structures, and a readers/writers lock to
protect the list. The list is used to preallocate resources for
the backchannel during backchannel requests. Callbacks are not
expected to cause significant latency, so only one callback will
be allowed at this time.

It also adds a pointer to the NFS callback service so that
requests can be directed to it for processing.

New callback members added to svc_serv. The NFSv4.1 callback service will
sleep on the svc_serv->svc_cb_waitq until new callback requests arrive.
The request will be queued in svc_serv->svc_cb_list. This patch adds this
list, the sleep queue and spinlock to svc_serv.

[nfs41: NFSv4.1 callback support]
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: minorversion support for nfs4_{init,destroy}_callback

move nfs4_init_callback into nfs4_init_client_minor_version
and nfs4_destroy_callback into nfs4_clear_client_minor_version

as these need to happen also when auto-negotiating the minorversion
once the callback service for nfs41 becomes different than for nfs4.0

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Fix checkpatch warning]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Type check arguments of nfs_callback_up]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Backchannel: Remove FIXME comment]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: Refactor nfs4_{init,destroy}_callback for nfs4.0

Refactor-out code to bring the callback service up and down.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: Process the RPC call direction

Reading and storing the RPC direction is a three step process.

1. xs_tcp_read_calldir() reads the RPC direction, but it will not store it
in the XDR buffer since the 'struct rpc_rqst' is not yet available.

2. The 'struct rpc_rqst' is obtained during the TCP_RCV_COPY_DATA state.
This state need not necessarily be preceeded by the TCP_RCV_READ_CALLDIR.
For example, we may be reading a continuation packet to a large reply.
Therefore, we can't simply obtain the 'struct rpc_rqst' during the
TCP_RCV_READ_CALLDIR state and assume it's available during TCP_RCV_COPY_DATA.

This patch adds a new TCP_RCV_READ_CALLDIR flag to indicate the need to
read the RPC direction.  It then uses TCP_RCV_COPY_CALLDIR to indicate the
RPC direction needs to be saved after the 'struct rpc_rqst' has been allocated.

3. The 'struct rpc_rqst' is obtained by the xs_tcp_read_data() helper
functions.  xs_tcp_read_common() then saves the RPC direction in the XDR
buffer if TCP_RCV_COPY_CALLDIR is set.  This will happen when we're reading
the data immediately after the direction was read.  xs_tcp_read_common()
then clears this flag.

[was nfs41: Skip past the RPC call direction]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: sunrpc: Add RPC direction back into the XDR buffer]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: sunrpc: Don't skip past the RPC call direction]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: Add ability to read RPC call direction on TCP stream.

NFSv4.1 callbacks can arrive over an existing connection. This patch adds
the logic to read the RPC call direction (call or reply). It does this by
updating the state machine to look for the call direction invoking
xs_tcp_read_calldir(...) after reading the XID.

[nfs41: Keep track of RPC call/reply direction with a flag]

As per 11/14/08 review of RFC 53/85.

Add a new flag to track whether the incoming message is an RPC call or an
RPC reply. TCP_RPC_REPLY is set in the 'struct sock_xprt' tcp_flags in
xs_tcp_read_calldir() if the message is an RPC reply sent on the forechannel.
It is cleared if the message is an RPC request sent on the back channel.

Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: increment_{open,lock}_seqid

Unlike minorversion0, in nfsv4.1 the open and lock seqids need
not be incremented by the client and should always be set to zero.

This is implemented using a new nfs_rpc_ops methods -
increment_open_seqid and increment_lock_seqid

Signed-off-by: Rahul Iyer <iyer@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: check for session not minorversion]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: only retry EXCHANGE_ID on recoverable errors

Stops an infinite loop of EXCHANGE_ID.

Signed-off-by: Andy Adamson <andros@netapp.com>
[fixed checkpatch warnings]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: recover lease in _nfs4_lookup_root

This creates the nfsv4.1 session on mount.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: get_clid_cred for EXCHANGE_ID

Unlike SETCLIENTID, EXCHANGE_ID requires a machine credential. Do not search
for credentials other than the machine credential.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: add a get_clid_cred function to nfs4_state_recovery_ops

EXCHANGE_ID has different credential requirements than SETCLIENTID.
Prepare for a separate credential function.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: establish sessions-based clientid

nfsv4.1 clientid is established via EXCHANGE_ID rather than
SETCLIENTID{,_CONFIRM}

This is implemented using a new establish_clid method in
nfs4_state_recovery_ops.

nfs41: establish clientid via exchange id only if cred != NULL

>From 2.6.26 reclaimer() uses machine cred for setting up the client id
therefore it is never expected to be NULL.

Signed-off-by: Rahul Iyer <iyer@netapp.com>
[removed dprintk]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: lease renewal]
[revamped patch for new nfs4_state_manager design]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: introduce get_state_renewal_cred

Use the machine cred for sending SEQUENCE to renew
the client's lease.

[revamp patch for new state management design starting 2.6.29]
[nfs41: support minorversion 1 for nfs4_check_lease]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: get cred in exchange_id when cred arg is NULL]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: use cl_machined_cred instead of cl_ex_cred]
    Since EXCHANGE_ID insists on using the machine credential, cl_ex_cred is
    not needed. nfs4_proc_exchange_id() is only called if the machine credential
    is available. Remove the credential logic from nfs4_proc_exchange_id.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: support minorversion 1 for nfs4_check_lease

[moved nfs4_get_renew_cred related changes to
"nfs41: introduce get_state_renewal_cred"]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: lease renewal

Send a NFSv4.1 SEQUENCE op rather than RENEW that was deprecated in
minorversion 1.
Use the nfs_client minorversion to select reboot_recover/
network_partition_recovery/state_renewal ops.

Note: we use reclaimer to create the nfs41 session before there are any
cl_superblocks for the nfs_client.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: check for session not minorversion]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[revamped patch for new nfs4_state_manager design]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: obliterate nfs4_state_recovery_ops.renew_lease method]
moved to nfs4_state_maintenance_ops
[also undid per-minorversion nfs4_state_recovery_ops here]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: schedule async session reset

Define a new session reset state which is set upon a sequence operation error
in both the sync and async error handlers.

Place all new requests and all but the last outstanding rpc on the
slot_tbl_waitq. Spawn the recovery thread when the last slot is free.
Call nfs4_proc_destroy_session, reinitialize the session, call
nfs4_proc_create_session, clear the session reset state, and wake up the next
task on the slot_tbl_waitq.

Return the nfs4_proc_destroy_session status to the session reclaimer and
check for NFS4ERR_BADSESSION and NFS4ERR_DEADSESSION. Other destroy session
errors should be handled in nfs4_proc_destroy_session where the call can
be retried with adjusted arguments.

Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
nfs41: make nfs4_wait_bit_killable public]
    nfs4_wait_bit_killable to be used by NFSv4.1 session recover logic.
Signed-off-by: Rahul Iyer <iyer@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: have create_session work on nfs_client]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: trigger the state manager for session reset]
    Replace the session reset state with the NFS4CLNT_SESSION_SETUP cl_state.
    Place all rpc tasks to sleep on the slot table waitqueue until the slot
    table is drained, then schedule state recovery and wait for it to complete.
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: remove nfs41_session_recovery [ch]
Replaced by using the nfs4_state_manager.
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: nfs4_wait_bit_killable only used locally]
[nfs41: keep nfs4_wait_bit_killable static]
[nfs41: keep const nfs_server in nfs4_handle_exception]
[nfs41: remove session parameter from nfs4_find_slot]
Signed-off-by: Andy Adamson <andros@netapp.com
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: resset the session from nfs41_setup_sequence]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: kick start nfs41 session recovery when handling errors

Remove checking for any errors that the SEQUENCE operation does not return.
-NFS4ERR_STALE_CLIENTID, NFS4ERR_EXPIRED, NFS4ERR_CB_PATH_DOWN, NFS4ERR_BACK_CHAN_BUSY, NFS4ERR_OP_NOT_IN_SESSION.

SEQUENCE operation error recovery is very primative, we only reset the session.

Remove checking for any errors that are returned by the SEQUENCE operation, but
that resetting the session won't address.
NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SEQUENCE_POS,NFS4ERR_TOO_MANY_OPS.

Add error checking for missing SEQUENCE errors that a session reset will
address.
NFS4ERR_BAD_HIGH_SLOT, NFS4ERR_DEADSESSION, NFS4ERR_SEQ_FALSE_RETRY.

A reset of the session is currently our only response to a SEQUENCE operation
error. Don't reset the session on errors where a new session won't help.

Don't reset the session on errors where a new session won't help.

[nfs41: nfs4_async_handle_error update error checking]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: trigger the state manager for session reset]
    Replace session state bit with nfs_client state bit.  Set the
    NFS4CLNT_SESSION_SETUP bit upon a session related error in the sync/async
    error handlers.
[nfs41: _nfs4_async_handle_error fix session reset error list]
Sequence operation errors that session reset could help.
NFS4ERR_BADSESSION
NFS4ERR_BADSLOT
NFS4ERR_BAD_HIGH_SLOT
NFS4ERR_DEADSESSION
NFS4ERR_CONN_NOT_BOUND_TO_SESSION
NFS4ERR_SEQ_FALSE_RETRY
NFS4ERR_SEQ_MISORDERED

Sequence operation errors that a session reset would not help

NFS4ERR_BADXDR
NFS4ERR_DELAY
NFS4ERR_REP_TOO_BIG
NFS4ERR_REP_TOO_BIG_TO_CACHE
NFS4ERR_REQ_TOO_BIG
NFS4ERR_RETRY_UNCACHED_REP
NFS4ERR_SEQUENCE_POS
NFS4ERR_TOO_MANY_OPS

Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41 nfs4_handle_exception fix session reset error list]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[moved nfs41_sequece_call_done code to nfs41: sequence operation]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: use rpc prepare call state for session reset

[nfs41: change nfs4_restart_rpc argument]
[nfs41: check for session not minorversion]
[nfs41: trigger the state manager for session reset]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[always define nfs4_restart_rpc]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: sunrpc: Export the call prepare state for session reset

Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: add session reset to state manager

Move the code to reset a session from the session_reclaimer to the
nfs4_state_manager.  Destroy the session, and create a new one. Treat
NFS4ERR_BADSESSION and NFS4ERR_DEADSESSION as a successful
nfs4_proc_destroy_session. Signal nfs4_proc_create_session that this is a
session reset so that the session slot table is re-used.

If the clientid is stale, set both NFS4CLNT_LEASE_EXPIRED and
NFS4CLNT_SESSION_SETUP bits and retry.

Use a switch statement in nfs4_session_recovery_handle_error for future
patche which will add handling for other errors.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: session reset in nfs4_recovery_handle_error]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: reset session on nfs4_do_reclaim session reset error]
    If nfs4_do_reclaim gets a session reset error, nfs4_recovery_handle_error
    will set the NFS4CLNT_SESSION_SETUP bit, and the state manager should
    continue processing to reset the session.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[move nfs4_proc_destroy_session declaration here]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: add session setup to the state manager

At mount, nfs_alloc_client sets the cl_state NFS4CLNT_LEASE_EXPIRED bit
and nfs4_alloc_session sets the NFS4CLNT_SESSION_SETUP bit, so both bits are
set when nfs4_lookup_root calls nfs4_recover_expired_lease which schedules
the nfs4_state_manager and waits for it to complete.

Place the session setup after the clientid establishment in nfs4_state_manager
so that the session is setup right after the clientid has been established
without rescheduling the state manager.

Unlike nfsv4.0, the nfs_client struct is not ready to use until the session
has been established.  Postpone marking the nfs_client struct to NFS_CS_READY
until after a successful CREATE_SESSION call so that other threads cannot use
the client until the session is established.

If the EXCHANGE_ID call fails and the session has not been setup (the
NFS4CLNT_SESSION_SETUP bit is set), mark the client with the error and return.

If the session setup CREATE_SESSION call fails with NFS4ERR_STALE_CLIENTID
which could occur due to server reboot or network partition inbetween the
EXCHANGE_ID and CREATE_SESSION call, reset the NFS4CLNT_LEASE_EXPIRED and
NFS4CLNT_SESSION_SETUP bits and try again.

If the CREATE_SESSION call fails with other errors, mark the client with
the error and return.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: NFS_CS_SESSION_SETUP cl_cons_state for back channel setup]
  On session setup, the CREATE_SESSION reply races with the server back channel
  probe which needs to succeed to setup the back channel. Set a new
  cl_cons_state NFS_CS_SESSION_SETUP just prior to the CREATE_SESSION call
  and add it as a valid state to nfs_find_client so that the client back channel
  can find the nfs_client struct and won't drop the server backchannel probe.
  Use a new cl_cons_state so that NFSv4.0 back channel behaviour which only
  sets NFS_CS_READY is unchanged.
  Adjust waiting on the nfs_client_active_wq accordingly.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: rename NFS_CS_SESSION_SETUP to NFS_CS_SESSION_INITING]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: set NFS_CL_SESSION_INITING in alloc_session]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: move session setup into a function]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[moved nfs4_proc_create_session declaration here]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: reset the session slot table

Separated from nfs41: schedule async session reset

Do not kfree the session slot table upon session reset, just re-initialize it.
Add a boolean to nfs4_proc_create_session to inidicate if this is a
session reset or a session initialization.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: sequence operation

Implement the sequence operation conforming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26

Check returned sessionid, slotid and slot sequenceid in decode_sequence.

If the server returns different values for sessionID, slotID or slot sequence
number than what was sent, the server is looney tunes.

Pass the sequence operation status to nfs41_sequence_done in order to
determine when to increment the slot sequence ID.

Free slot is separated from sequence done.

Signed-off-by: Rahul Iyer <iyer@netapp.com>
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Andy Adamson<andros@umich.edu>
[nfs41: sequence res use slotid]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: deref slot table in decode_sequence only for minorversion!=0]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: nfs4_call_sync]
[nfs41: remove SEQ4_STATUS_USE_TK_STATUS]
[nfs41: return ESERVERFAULT in decode_sequence]
[no sr_session, no sr_flags]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: use nfs4_call_sync_sequence to renew session lease]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: remove nfs4_call_sync_sequence forward definition]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: use struct nfs_client for nfs41_proc_async_sequence]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: pass *session in seq_args and seq_res]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41 nfs41_sequence_call_done update error checking]
[nfs41 nfs41_sequence_done update error checking]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: remove switch on error from nfs41_sequence_call_done]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: enable nfs_client only nfs4_async_handle_error

The session is per struct nfs_client, not per nfs_server. Allow the handler
to be called with no nfs_server which simplifies the nfs4_proc_async_sequence session renewal call and will let it be used by pnfs file layout data servers.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: destroy_session operation

Implement the destroy_session operation conforming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26

Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Andy Adamson<andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: remove extraneous rpc_clnt pointer]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41; NFS_CS_READY required for DESTROY_SESSION]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: pass *session in seq_args and seq_res]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[nfs41: fix encode_destroy_session's xdr Xcoding pointer type]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: use session attributes for rsize and wsize

Set the mount points rsize and wsize to the negotiated session fore channel
maximum response and requeset size. These values will be bound checked in
nfs_server_set_fsinfo.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[move nfs4_session_set_rwsize into CONFIG_NFS_V4]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: verify session channel attribues

Invalidate the session if the server returns invalid fore or back channel
attributes.

Use a KERN_WARNING to report the fatal session estabishment error.

Signed-off-by: Andy Adamson <andros@netapp.com>
[refactor nfs4_verify_channel_attrs]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: create_session operation

Implement the create_session operation conforming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26

Set the real fore channel max operations to preserve server resources.
Note: If the server returns < NFS4_MAX_OPS, the client will very soon
get an NFS4ERR_TOO_MANY_OPS. A later patch will handle this.

Set the max_rqst_sz and max_resp_sz to PAGE_SIZE - we preallocate the buffers.

Set the back channel max_resp_sz_cached to zero to force the client to
always set csa_cachethis to FALSE because the current implementation
of the back channel DRC only supports caching the CB_SEQUENCE operation.

The client back channel server supports one slot, and desires 2 operations
per compound.

Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Andy Adamson<andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: remove extraneous rpc_clnt pointer]
Use the struct nfs_client cl_rpcclient.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: nfs4_init_channel_attrs, just use nfs41_create_session_args]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: use rsize and wsize for session channel attributes]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: set channel max operations]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: set back channel attributes]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: obliterate nfs4_adjust_channel_attrs]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: have create_session work on nfs_client]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: move CONFIG_NFS_V4_1 endif]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: pass *session in seq_args and seq_res]
[moved nfs4_init_slot_table definition here]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: use kcalloc to allocate slot table]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[nfs41: fix Xcode_create_session's xdr Xcoding pointer type]
[nfs41: refactor decoding of channel attributes]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41: get_lease_time

get_lease_time uses the FSINFO rpc operation to
get the lease time attribute.

nfs4_get_lease_time() is only called from the state manager on session setup
so don't recover from clientid or sequence level errors.

We do need to recover from NFS4ERR_DELAY or NFS4ERR_GRACE.
Use NFS4_POLL_RETRY_MIN - the Linux server returns NFS4ERR_DELAY when an
upcall is needed to resolve an uncached export referenced by a file handle.

[nfs41: sequence res use slotid]
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: remove extraneous rpc_clnt pointer]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: have get_lease_time work on nfs_client]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: get_lease_time recover from NFS4ERR_DELAY]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: pass *session in seq_args and seq_res]
[define nfs4_get_lease_time_{args,res}]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: exchange_id operation

Implement the exchange_id operation conforming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26

Unlike NFSv4.0, NFSv4.1 requires machine credentials. RPC_AUTH_GSS machine
credentials will be passed into the kernel at mount time to be available for
the exchange_id operation.

RPC_AUTH_UNIX root mounts can use the UNIX root credential. Store the root
credential in the nfs_client struct.

Without a credential, NFSv4.1 state renewal fails.

[nfs41: establish clientid via exchange id only if cred != NULL]
Signed-off-by: Andy Adamson<andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: move nfstime4 from under CONFIG_NFS_V4_1]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: do not wait a lease time in exchange id]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: pass *session in seq_args and seq_res]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[nfs41: Ignoring impid in decode_exchange_id is missing a READ_BUF]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: fix Xcode_exchange_id's xdr Xcoding pointer type]
[nfs41: get rid of unused struct nfs41_exchange_id_res members]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>

nfs41 delegreturn sequence setup done support

Separate delegreturn calls from nfs41: sequence setup/done support

Implement the delegreturn rpc_call_prepare method for
asynchronuos nfs rpcs, call nfs41_setup_sequence from
respective rpc_call_validate_args methods.

Call nfs4_sequence_done from respective rpc_call_done methods.

Note that we need to pass a pointer to the nfs_server in calls data
for passing on to nfs4_sequence_done.

Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfs: client data server write validate and release]
Signed-off-by: Andy Adamson<andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41 commit sequence setup done support

Separate commit calls from nfs41: sequence setup/done support

Implement the commit rpc_call_prepare method for
asynchronuos nfs rpcs, call nfs41_setup_sequence from
respective rpc_call_validate_args methods.

Call nfs4_sequence_done from respective rpc_call_done methods.

Note that we need to pass a pointer to the nfs_server in calls data
for passing on to nfs4_sequence_done.

Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfs: client data server write validate and release]
Signed-off-by: Andy Adamson<andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Support sessions with O_DIRECT.]
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: separate free slot from sequence done]
[nfs41: nfs4_sequence_free_slot use nfs_client for data server]
Signed-off-by: Andy Adamson<andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41 write sequence setup done support

Separate write calls from nfs41: sequence setup/done support

Implement the write rpc_call_prepare method for
asynchronuos nfs rpcs, call nfs41_setup_sequence from
respective rpc_call_validate_args methods.

Call nfs4_sequence_done from respective rpc_call_done methods.

Note that we need to pass a pointer to the nfs_server in calls data
for passing on to nfs4_sequence_done.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfs: client data server write validate and release]
Signed-off-by: Andy Adamson <andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[move the nfs4_sequence_free_slot call in nfs_readpage_retry from]
[nfs41: separate free slot from sequence done
Signed-off-by: Andy Adamson <andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Support sessions with O_DIRECT.]
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: nfs4_sequence_free_slot use nfs_client for data server]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: read sequence setup/done support

Implement the read rpc_call_prepare method for
asynchronuos nfs rpcs, call nfs41_setup_sequence from
respective rpc_call_validate_args methods.

Call nfs4_sequence_done from respective rpc_call_done methods.

Note that we need to pass a pointer to the nfs_server in calls data
for passing on to nfs4_sequence_done.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfs: client data server write validate and release]
Signed-off-by: Andy Adamson <andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[move the nfs4_sequence_free_slot call in nfs_readpage_retry from]
[nfs41: separate free slot from sequence done]
[remove nfs_readargs.nfs_server, use calldata->inode instead]
Signed-off-by: Andy Adamson <andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Support sessions with O_DIRECT]
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: nfs4_sequence_free_slot use nfs_client for data server]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: unlink sequence setup/done support

Implement the rpc_call_prepare methods for
asynchronuos nfs rpcs, call nfs41_setup_sequence from
respective rpc_call_validate_args methods.

Call nfs4_sequence_done from respective rpc_call_done methods.

Note that we need to pass a pointer to the nfs_server in calls data
for passing on to nfs4_sequence_done.

Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfs: client data server write validate and release]
Signed-off-by: Andy Adamson<andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: separate free slot from sequence done]
[nfs41: sequence res use slotid]
[nfs41: remove SEQ4_STATUS_USE_TK_STATUS]
[nfs41: nfs4_sequence_free_slot use nfs_client for data server]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: locku sequence setup/done support

Separate nfs4_locku calls from nfs41: sequence setup/done support
Call nfs4_sequence_done from respective rpc_call_done methods.

Note that we need to pass a pointer to the nfs_server in calls data
for passing on to nfs4_sequence_done.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfs: client data server write validate and release]
Signed-off-by: Andy Adamson <andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: nfs4_sequence_free_slot use nfs_client for data server]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: lock sequence setup/done support

Separate nfs4_lock calls from nfs41: sequence setup/done support
Call nfs4_sequence_done from respective rpc_call_done methods.

Note that we need to pass a pointer to the nfs_server in calls data
for passing on to nfs4_sequence_done.

Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfs: client data server write validate and release]
[use nfs4_sequence_done_free_slot]
Signed-off-by: Andy Adamson<andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: open sequence setup/done support

Separate nfs4_open calls from nfs41: sequence setup/done support
Call nfs4_sequence_done from respective rpc_call_done methods.

Note that we need to pass a pointer to the nfs_server in calls data
for passing on to nfs4_sequence_done.

Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfs: client data server write validate and release]
[use nfs4_sequence_done_free_slot]
Signed-off-by: Andy Adamson<andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: close sequence setup/done support

Separate nfs4_close calls from nfs41: sequence setup/done support
Call nfs4_sequence_done from respective rpc_call_done methods.

Note that we need to pass a pointer to the nfs_server in calls data
for passing on to nfs4_sequence_done.

Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfs: client data server write validate and release]
Signed-off-by: Andy Adamson<andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: separate free slot from sequence done]
[nfs41: sequence res use slotid]
[nfs41: remove SEQ4_STATUS_USE_TK_STATUS]
[nfs41: nfs4_sequence_free_slot use nfs_client for data server]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: nfs41_call_sync_done

Implement nfs4.1 synchronous rpc_call_done method
that essentially just calls nfs4_sequence_done, that turns
around and calls nfs41_sequence_done for minorversion1 rpcs.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: check for session not minorversion]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[move adding nfs4_sequence_free_slot from nfs41-separate-free-slot-from-sequence-done]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: nfs41_call_sync_data use nfs_client not nfs_server]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: nfs41_sequence_done

Handle session level errors, update slot sequence id and
sessions bookeeping, free slot.

[nfs41: sequence res use slotid]
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: remove SEQ4_STATUS_USE_TK_STATUS]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: check for session not minorversion]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: bail out early out of nfs41_sequence_done if !res->sr_session]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[move nfs4_sequence_done from nfs41: nfs41_call_sync_done]
Signed-off-by: Andy Adamson <andros@netapp.com>
[move nfs4_sequence_free_slot from nfs41: separate free slot from sequence done]
Don't free the slot until after all rpc_restart_calls have completed.
Session reset will require more work.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[moved reset sr_slotid to nfs41_sequence_free_slot]
[free slot also on unexpectecd error]
[remove seq_res.sr_session member, use nfs_client's instead]
[ditch seq_res.sr_flags until used]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[look at sr_slotid for bailing out early from nfs41_sequence_done]
[nfs41: rpc_wake_up_next if sessions slot was not consumed.]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: nfs4_sequence_free_slot use nfs_client for data server]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: remove unused error checking in nfs41_sequence_done]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: remove nfs4_has_session check in nfs41_sequence_done]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: remove nfs_client pointer check]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: nfs41_sequence_free_slot

[from nfs41: separate free slot from sequence done]

Don't free the slot until after all rpc_restart_calls have completed.
Session reset will require more work.

As noted by Trond, since we're using rpc_wake_up_next rather than
rpc_wake_up() we must always wake up the next task in the queue
either by going through nfs4_free_slot, or just calling
rpc_wake_up_next if no slot is to be freed.

[nfs41: sequence res use slotid]
[nfs41: remove SEQ4_STATUS_USE_TK_STATUS]
[got rid of nfs4_sequence_res.sr_session, use nfs_client.cl_session instead]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: rpc_wake_up_next if sessions slot was not consumed.]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: nfs4_sequence_free_slot use nfs_client for data server]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs41: free slot

Free a slot in the slot table.

Mark the slot as free in the bitmap-based allocation table
by clearing a bit corresponding to the slotid.

Update lowest_free_slotid if freed slotid is lower than that.
Update highest_used_slotid.  In the case the freed slotid
equals the highest_used_slotid, scan downwards for the next
highest used slotid using the optimized fls* functions.

Finally, wake up thread waiting on slot_tbl_waitq for a free slot
to become available.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: free slot use slotid]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: use find_first_zero_bit for nfs4_find_slot]
    While at it, obliterate lowest_free_slotid and fix-up related comments.
    As per review comment 21/85.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: use __clear_bit for nfs4_free_slot]
    While at it, fix-up function comment.
    Part of review comment 22/85.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: use find_last_bit in nfs4_free_slot to determine highest used slot.]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: rpc_sleep_on slot_tbl_waitq must be called under slot_tbl_lock]
    Otherwise there's a race (we've hit) with nfs4_free_slot where
    nfs41_setup_sequence sees a full slot table, unlocks slot_tbl_lock,
    nfs4_free_slots happen concurrently and call rpc_wake_up_next
    where there's nobody to wake up yet, context goes back to
    nfs41_setup_sequence which goes to sleep when the slot table
    is actually empty now and there's no-one to wake it up anymore.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>