misc: Fix allocation 'borrowed' by vhost_net
[safe/jmp/linux-2.6] / arch / arm / mach-mx3 /
2010-05-26 Philippe Rétornazleds: Add mx31moboard MC13783 led support
2010-05-25 Linus TorvaldsMerge branch 'devel' of /home/rmk/linux-2.6-arm
2010-05-19 Alberto Panizzomx31_3ds: Support the keypad situated in the personalit...
2010-05-19 Alberto PanizzoMX3X: Add Keypad device definition for MX3X arch
2010-05-18 Wolfgang Grandeggercan: sja1000 platform data fixes
2010-05-17 Wolfram Sangarm/mach-mx3: add watchdog device to Phytec-boards
2010-05-17 Wolfram Sangarm/mach-mx2/3: Fix watchdog-devices to match the curre...
2010-05-17 Magnus LiljaMXC: Add USB OTG (device) for i.MX31 PDK (3DS) board.
2010-05-17 Philippe Rétornazmx31moboard: OTG host support for smartbot board
2010-05-17 Philippe Rétornazmx31moboard: Move usb OTG device registration
2010-05-17 Philippe Rétornazmx31moboard: Fix usb PHY reset
2010-05-06 Valentin Longchampmx31smartbot: change the config of a gpio
2010-04-14 Daniel MackARM: mx3/lilly1131: add USB support
2010-04-14 Vladimir Zapolskiyimx31: add rtc device on litekit board.
2010-04-14 Vladimir Zapolskiyimx3: Add rtc platform device support
2010-04-08 Russell KingMerge branch 'for-rmk' of git://git.pengutronix.de...
2010-03-30 Tejun Heoinclude cleanup: Update gfp.h and slab.h includes to...
2010-03-30 Alberto PanizzoMXC: mach_armadillo5x0: Add USB Host support.
2010-03-30 Andrea GelminiARM mach-mx3: duplicated include
2010-03-30 Andrea GelminiARM mach-mx3: duplicated include
2010-03-30 Vladimir Zapolskiyimx31: add watchdog device on litekit board.
2010-03-30 Vladimir Zapolskiyimx3: Add watchdog platform device support
2010-03-25 Alberto PanizzoMXC: mach-mx31_3ds: add support for freescale mc13783...
2010-03-25 Alberto PanizzoMXC: mach-mx31_3ds: Add SPI1 device support.
2010-03-25 Alberto PanizzoMXC: mach-mx31_3ds: Add support for on board NAND Flash.
2010-03-25 Alberto PanizzoMXC: mach-mx31_3ds: Update variable names over recent...
2010-03-25 Vladimir Zapolskiyimx31: fix parent clock for rtc
2010-03-08 Russell KingMerge branch 'origin' into devel-stable
2010-03-01 Linus TorvaldsMerge branch 'for-linus' of /home/rmk/linux-2.6-arm
2010-02-24 Mark Brownmx31ads: Configure SSI5 pins in IOMUX for PMIC module...
2010-02-12 Russell KingARM: Consolidate clks_register() and similar
2010-02-10 Valentin Longchampmx31moboard: support for the smartbot baseboard
2010-02-10 Valentin Longchampmx31moboard: make usbh2 enable gpio claim more atomic
2010-02-10 Valentin Longchampmx31moboard: change initial reset status for robot...
2010-02-10 Sascha Haueri.MX pcm043: Add AC97 sound support
2010-02-04 Sascha Haueri.MX27 pca100: Add USB support
2010-02-04 Sascha Haueri.MX31 pcm037: Add USB support
2010-02-02 Uwe Kleine-Königimx: define per SOC ..._PHYS_OFFSET and use these in...
2010-01-29 Sascha HauerMerge branch 'mxc-rc' into mxc-master
2010-01-26 Vladimir ZapolskiyARM: IMX31: configure pins iomux for SDHC setup on...
2010-01-14 Sascha HauerMerge branch 'imx' of git://git.pengutronix.de/git...
2010-01-08 Uwe Kleine-Königimx: define functions to configure chip selects in...
2010-01-08 Uwe Kleine-Königimx: only define deprecated symbols conditionally
2010-01-08 Uwe Kleine-Königimx: mangle addresses after adding the offset
2010-01-08 Uwe Kleine-Königmx3/kzm_arm11_01: define and use board specific IO_ADDR...
2010-01-08 Uwe Kleine-Königimx35: define and use MX35_IO_ADDRESS
2010-01-08 Uwe Kleine-Königimx31: define and use MX31_IO_ADDRESS
2010-01-08 Uwe Kleine-Königimx/mx3: rename files defining a machine to mach-$mach.c
2010-01-05 Mark Brownmx31ads: Provide an IRQ range to the WM835x on the...
2010-01-05 Mark Brownmx31ads: Provide a name for EXPIO interrupt chip
2010-01-05 Mark Brownmx31ads: Allow enable/disable of switchable supplies
2010-01-05 Mark Brownmx31ads: Allow enable/disable of switchable supplies
2010-01-05 Mark Brownmx31ads: Convert 1133-EV1 to use dev_name to specify...
2010-01-05 Uwe Kleine-Königimx/mx3: rename clock.c and iomux.c to {clock,iomux...
2010-01-05 Uwe Kleine-Königimx/mach-mx3: use constants namespaced by the correspon...
2010-01-04 Uwe Kleine-Königimx/mx3: depend on USB_ULPI for otg_ulpi_create
2010-01-04 Wolfgang DenkARM: MX3: make CPU revision number detection work on...
2010-01-04 Valentin Longchampmx31moboard: fix usbh device names
2010-01-04 Guennadi Liakhovetskimx3: add support for the mt9v022 camera sensor to pcm03...
2009-12-04 Robert Schwebelmx31moboard: fix typo
2009-11-30 Harro Haanmx35: add usb gadget support in mx35pdk.c
2009-11-30 Harro Haanmx35: register usb_ahb clock in clock-imx35.c
2009-11-27 Yoichi YuasaAdd KZM-ARM11-01 support
2009-11-27 Uwe Kleine-KönigIMX: don't disable the uart clock if DEBUG_LL uses it
2009-11-24 Sascha Haueri.MX31 clock: rename SSI clocks to driver name
2009-11-24 Valentin Longchampmx31moboard: support for usbh1 and usbh2
2009-11-24 Valentin Longchampmx31moboard: SPI corrections
2009-11-23 Daniel MackARM: MX3: fix CPU revision number detection
2009-11-23 Daniel MackARM: MX3: lilly1131: move MC13783 device registration
2009-11-19 Daniel MackARM: MX3: add NOR flash support via physmap mtd driver
2009-11-19 Daniel MackARM: MX3: add support for GPIO LEDs on litekit db
2009-11-19 Daniel MackARM: MX3: add USB functions for mx31litekit
2009-11-19 Daniel MackARM: MX3: add SPI devices for mx31lite
2009-11-19 Daniel MackARM: MX3: add MMC/SDHC support to mx31lite-db.c
2009-11-19 Daniel MackARM: MX3: modularize 'mx31lite' code
2009-11-14 Sascha Haueri.MX35: Fix audmux clock
2009-11-14 Sascha HauerMXC: Add a digital audio multiplexer driver
2009-11-14 Sascha Haueri.MX3: Add sound (ssi) resources
2009-11-14 Sascha Hauerpcm043: Add NAND support
2009-11-14 Juergen BeisertMXC NFC: Fix NFCs address area on i.MX35
2009-11-14 Juergen BeisertMXC NFC: Add the clock resource to support NFC in i...
2009-11-14 Valentin Longchampmx31moboard: camera support
2009-11-14 Valentin Longchampmx31moboard: initialize ipu device for all the boards
2009-11-14 Valentin Longchampmx31moboard: SPI and MC13783 voltage regulator support
2009-11-14 Valentin Longchampmx31moboard: support for pin linked for battery presenc...
2009-11-14 Valentin Longchampmx31moboard: serial port fix
2009-11-14 Alberto PanizzoArmadillo500 Add support for Seiko Instruments S-35390A...
2009-11-14 Alberto PanizzoArmadillo500 Add i2c second bus support.
2009-11-14 Alberto PanizzoArmadillo500 Correct bus length for SMSC9118 on board...
2009-11-14 Alberto PanizzoArmadillo500 Add support for onboard GPIO Buttons.
2009-11-14 Daniel MackARM: MX3: Add pad config for MMC pins on lilly-db
2009-11-14 Daniel MackARM: MX3: add support for mc13783 on lilly-db
2009-11-14 Daniel MackARM: MX3: add SPI functions for lilly1131-db
2009-11-14 Daniel MackARM: MX3: remove I2C defintions from mx31lilly.c
2009-10-13 Valentin LongchampMXC: fix reset for mx31, mx35 and mx27 SoCs
2009-10-13 Guennadi Liakhovetskifix pcm037_eet compilation with the new SPI driver
2009-10-13 Guennadi Liakhovetskifix compilation of i.MX31 platforms
2009-09-12 Russell KingMerge branch 'master' into devel
2009-08-14 Valentin Longchampmx31moboard: two GPIOS are used to reset other microcon...
2009-08-14 Valentin Longchampmx31moboard: initialize 4 input gpios for mx31moboard
next