From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 7 May 2010 15:26:24 +0000 (+0100)
Subject: ARM: 6111/1: Implement read/write for ownership in the ARMv6 DMA cache ops
X-Git-Tag: v2.6.34~8^2~4
X-Git-Url: http://ftp.safe.ca/?p=safe%2Fjmp%2Flinux-2.6;a=commitdiff_plain;h=f4d6477f7f073b99220386d62f5bf54bec3482cc

ARM: 6111/1: Implement read/write for ownership in the ARMv6 DMA cache ops

The Snoop Control Unit on the ARM11MPCore hardware does not detect the
cache operations and the dma_cache_maint*() functions may leave stale
cache entries on other CPUs. The solution implemented in this patch
performs a Read or Write For Ownership in the ARMv6 DMA cache
maintenance functions. These LDR/STR instructions change the cache line
state to shared or exclusive so that the cache maintenance operation has
the desired effect.

Tested-by: George G. Davis <gdavis@mvista.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---

diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 9d89c67..e46ecd8 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -211,6 +211,9 @@ v6_dma_inv_range:
 	mcrne	p15, 0, r1, c7, c15, 1		@ clean & invalidate unified line
 #endif
 1:
+#ifdef CONFIG_SMP
+	str	r0, [r0]			@ write for ownership
+#endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D line
 #else
@@ -231,6 +234,9 @@ v6_dma_inv_range:
 v6_dma_clean_range:
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
+#ifdef CONFIG_SMP
+	ldr	r2, [r0]			@ read for ownership
+#endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D line
 #else
@@ -251,6 +257,10 @@ v6_dma_clean_range:
 ENTRY(v6_dma_flush_range)
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
+#ifdef CONFIG_SMP
+	ldr	r2, [r0]			@ read for ownership
+	str	r2, [r0]			@ write for ownership
+#endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line
 #else
@@ -273,7 +283,9 @@ ENTRY(v6_dma_map_area)
 	add	r1, r1, r0
 	teq	r2, #DMA_FROM_DEVICE
 	beq	v6_dma_inv_range
-	b	v6_dma_clean_range
+	teq	r2, #DMA_TO_DEVICE
+	beq	v6_dma_clean_range
+	b	v6_dma_flush_range
 ENDPROC(v6_dma_map_area)
 
 /*
@@ -283,9 +295,6 @@ ENDPROC(v6_dma_map_area)
  *	- dir	- DMA direction
  */
 ENTRY(v6_dma_unmap_area)
-	add	r1, r1, r0
-	teq	r2, #DMA_TO_DEVICE
-	bne	v6_dma_inv_range
 	mov	pc, lr
 ENDPROC(v6_dma_unmap_area)