From: Zhao Yakui Date: Mon, 4 Jan 2010 08:29:32 +0000 (+0800) Subject: drm/i915: Select the correct BPC for LVDS on Ironlake X-Git-Tag: v2.6.33-rc4~76^2~2 X-Git-Url: http://ftp.safe.ca/?p=safe%2Fjmp%2Flinux-2.6;a=commitdiff_plain;h=e5a95eb778690bc864eb330202d2c1b974caaeb4 drm/i915: Select the correct BPC for LVDS on Ironlake Select the correct BPC for LVDS on Ironlake. If it is 18-bit LVDS panel, the BPC will be 6. When it is 24-bit LVDS panel, the BPC will 8. At the same time the BPC will be 8 when the output device is CRT/HDMI/DP. Signed-off-by: Zhao Yakui Signed-off-by: Eric Anholt --- diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 63e8e9f..5e2159b 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2993,6 +2993,18 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* determine panel color depth */ temp = I915_READ(pipeconf_reg); + temp &= ~PIPE_BPC_MASK; + if (is_lvds) { + int lvds_reg = I915_READ(PCH_LVDS); + /* the BPC will be 6 if it is 18-bit LVDS panel */ + if ((lvds_reg & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP) + temp |= PIPE_8BPC; + else + temp |= PIPE_6BPC; + } else + temp |= PIPE_8BPC; + I915_WRITE(pipeconf_reg, temp); + I915_READ(pipeconf_reg); switch (temp & PIPE_BPC_MASK) { case PIPE_8BPC: