From: Alex Deucher Date: Mon, 7 Jun 2010 15:35:53 +0000 (-0400) Subject: drm/radeon/kms/pm: Disable voltage adjust on RS780/RS880 X-Git-Tag: cont_sys_log_2~10^2~11 X-Git-Url: http://ftp.safe.ca/?p=safe%2Fjmp%2Flinux-2.6;a=commitdiff_plain;h=aa1df0f229829109e49d1dc493252fd94a7af2a1 drm/radeon/kms/pm: Disable voltage adjust on RS780/RS880 The vddc value in the power tables is not an actual voltage like on discrete r6xx/r7xx/evergreen systems, but instead has a symbolic meaning (e.g., NONE, LOW, HIGH, etc.). See atombios.h Most RS780/RS880 vbioses don't have a SetVoltage table anyway, so it shouldn't be doing anything to the hardware at the moment. I need to figure out how voltage is supposed to work on the newer IGPs; until then, disable it. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 4305cd5..f0fcd6c 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -1833,10 +1833,7 @@ void radeon_atombios_get_power_modes(struct radeon_device *rdev) /* skip invalid modes */ if (rdev->pm.power_state[state_index].clock_info[mode_index].sclk == 0) continue; - rdev->pm.power_state[state_index].clock_info[mode_index].voltage.type = - VOLTAGE_SW; - rdev->pm.power_state[state_index].clock_info[mode_index].voltage.voltage = - clock_info->usVDDC; + /* voltage works differently on IGPs */ mode_index++; } else if (ASIC_IS_DCE4(rdev)) { struct _ATOM_PPLIB_EVERGREEN_CLOCK_INFO *clock_info =