From: Karsten Keil Date: Thu, 23 Apr 2009 02:24:21 +0000 (+0000) Subject: Add reference to CAPI 2.0 standard X-Git-Tag: v2.6.30-rc4~3^2~6 X-Git-Url: http://ftp.safe.ca/?p=safe%2Fjmp%2Flinux-2.6;a=commitdiff_plain;h=2296e5a0136f7ba64c99f3a48a55a687aa9abcc8 Add reference to CAPI 2.0 standard Move the entry about CAPI 2.0 to the beginning and add a URL. Incorporate changes suggested by Randy Dunlap, thanks for proofreading. Signed-off-by: Karsten Keil Signed-off-by: David S. Miller --- diff --git a/Documentation/isdn/INTERFACE.CAPI b/Documentation/isdn/INTERFACE.CAPI index 8947ffc..786d619 100644 --- a/Documentation/isdn/INTERFACE.CAPI +++ b/Documentation/isdn/INTERFACE.CAPI @@ -3,6 +3,11 @@ Kernel CAPI Interface to Hardware Drivers 1. Overview +From the CAPI 2.0 specification: +COMMON-ISDN-API (CAPI) is an application programming interface standard used +to access ISDN equipment connected to basic rate interfaces (BRI) and primary +rate interfaces (PRI). + Kernel CAPI operates as a dispatching layer between CAPI applications and CAPI hardware drivers. Hardware drivers register ISDN devices (controllers, in CAPI lingo) with Kernel CAPI to indicate their readiness to provide their service @@ -12,6 +17,9 @@ application registration to an available device, forwarding it to the corresponding hardware driver. Kernel CAPI then forwards CAPI messages in both directions between the application and the hardware driver. +Format and semantics of CAPI messages are specified in the CAPI 2.0 standard. +This standard is freely available from http://www.capi.org. + 2. Driver and Device Registration @@ -53,12 +61,10 @@ open() operation on regular files or character devices. After a successful return from register_appl(), CAPI messages from the application may be passed to the driver for the device via calls to the send_message() callback function. The CAPI message to send is stored in the -data portion of a skb. Conversely, the driver may call Kernel CAPI's +data portion of an skb. Conversely, the driver may call Kernel CAPI's capi_ctr_handle_message() function to pass a received CAPI message to Kernel CAPI for forwarding to an application, specifying its ApplID. -Format and semantics of CAPI messages are specified in the CAPI 2.0 standard. - Deregistration requests (CAPI operation CAPI_RELEASE) from applications are forwarded as calls to the release_appl() callback function, passing the same ApplID as with register_appl(). After return from release_appl(), no CAPI @@ -75,9 +81,9 @@ the following non-private fields, all to be set by the driver before calling register_capi_driver(): char name[32] - the name of the driver, as a zero terminated ASCII string + the name of the driver, as a zero-terminated ASCII string char revision[32] - the revision number of the driver, as a zero terminated ASCII string + the revision number of the driver, as a zero-terminated ASCII string int (*add_card)(struct capi_driver *driver, capicardparams *data) a callback function pointer (may be NULL) @@ -100,10 +106,10 @@ void *driverdata an opaque pointer to driver specific data, not touched by Kernel CAPI char name[32] - the name of the controller, as a zero terminated ASCII string + the name of the controller, as a zero-terminated ASCII string char *driver_name - the name of the driver, as a zero terminated ASCII string + the name of the driver, as a zero-terminated ASCII string int (*load_firmware)(struct capi_ctr *ctrlr, capiloaddata *ldata) (optional) pointer to a callback function for sending firmware and