From: Roland Dreier <rolandd@cisco.com>
Date: Wed, 10 Oct 2007 02:59:05 +0000 (-0700)
Subject: IB/mlx4: Use __set_data_seg() in mlx4_ib_post_recv()
X-Git-Tag: v2.6.24-rc1~1453^2~81
X-Git-Url: http://ftp.safe.ca/?p=safe%2Fjmp%2Flinux-2.6;a=commitdiff_plain;h=2242fa4f04d670f02efb43ec537d677edc220880

IB/mlx4: Use __set_data_seg() in mlx4_ib_post_recv()

Use a __set_data_seg() helper in mlx4_ib_post_recv() too; in addition
to making the code easier to read, this also allows gcc to generate
better code -- on x86_64:

add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-8 (-8)
function                                     old     new   delta
mlx4_ib_post_recv                            359     351      -8

Signed-off-by: Roland Dreier <rolandd@cisco.com>
---

diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 85c51bd..31a480e 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -1249,6 +1249,13 @@ static void set_data_seg(struct mlx4_wqe_data_seg *dseg, struct ib_sge *sg)
 	dseg->byte_count = cpu_to_be32(sg->length);
 }
 
+static void __set_data_seg(struct mlx4_wqe_data_seg *dseg, struct ib_sge *sg)
+{
+	dseg->byte_count = cpu_to_be32(sg->length);
+	dseg->lkey       = cpu_to_be32(sg->lkey);
+	dseg->addr       = cpu_to_be64(sg->addr);
+}
+
 int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 		      struct ib_send_wr **bad_wr)
 {
@@ -1464,11 +1471,8 @@ int mlx4_ib_post_recv(struct ib_qp *ibqp, struct ib_recv_wr *wr,
 
 		scat = get_recv_wqe(qp, ind);
 
-		for (i = 0; i < wr->num_sge; ++i) {
-			scat[i].byte_count = cpu_to_be32(wr->sg_list[i].length);
-			scat[i].lkey       = cpu_to_be32(wr->sg_list[i].lkey);
-			scat[i].addr       = cpu_to_be64(wr->sg_list[i].addr);
-		}
+		for (i = 0; i < wr->num_sge; ++i)
+			__set_data_seg(scat + i, wr->sg_list + i);
 
 		if (i < qp->rq.max_gs) {
 			scat[i].byte_count = 0;