From: Alan Cox Date: Wed, 30 Apr 2008 07:54:16 +0000 (-0700) Subject: epca: coding style X-Git-Tag: v2.6.26-rc1~179 X-Git-Url: http://ftp.safe.ca/?p=safe%2Fjmp%2Flinux-2.6;a=commitdiff_plain;h=191260a01257793ad76cc35b7f9e1508d27bdd4b epca: coding style Clean up the epca driver Signed-off-by: Alan Cox Cc: Jiri Slaby Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/char/epca.c b/drivers/char/epca.c index 39c6a36..60a4df7 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -38,8 +38,8 @@ #include #include #include -#include -#include +#include +#include #include #include #include "digiPCI.h" @@ -73,7 +73,8 @@ static int invalid_lilo_config; */ static DEFINE_SPINLOCK(epca_lock); -/* MAXBOARDS is typically 12, but ISA and EISA cards are restricted to 7 below. */ +/* MAXBOARDS is typically 12, but ISA and EISA cards are restricted + to 7 below. */ static struct board_info boards[MAXBOARDS]; static struct tty_driver *pc_driver; @@ -162,7 +163,7 @@ static int pc_chars_in_buffer(struct tty_struct *); static void pc_flush_buffer(struct tty_struct *); static void pc_flush_chars(struct tty_struct *); static int block_til_ready(struct tty_struct *, struct file *, - struct channel *); + struct channel *); static int pc_open(struct tty_struct *, struct file *); static void post_fep_init(unsigned int crd); static void epcapoll(unsigned long); @@ -174,18 +175,18 @@ static unsigned termios2digi_c(struct channel *ch, unsigned); static void epcaparam(struct tty_struct *, struct channel *); static void receive_data(struct channel *); static int pc_ioctl(struct tty_struct *, struct file *, - unsigned int, unsigned long); + unsigned int, unsigned long); static int info_ioctl(struct tty_struct *, struct file *, - unsigned int, unsigned long); + unsigned int, unsigned long); static void pc_set_termios(struct tty_struct *, struct ktermios *); static void do_softint(struct work_struct *work); static void pc_stop(struct tty_struct *); static void pc_start(struct tty_struct *); -static void pc_throttle(struct tty_struct * tty); +static void pc_throttle(struct tty_struct *tty); static void pc_unthrottle(struct tty_struct *tty); static void digi_send_break(struct channel *ch, int msec); static void setup_empty_event(struct tty_struct *tty, struct channel *ch); -void epca_setup(char *, int *); +static void epca_setup(char *, int *); static int pc_write(struct tty_struct *, const unsigned char *, int); static int pc_init(void); @@ -242,7 +243,7 @@ static void assertmemoff(struct channel *ch) /* PCXEM windowing is the same as that used in the PCXR and CX series cards. */ static void pcxem_memwinon(struct board_info *b, unsigned int win) { - outb_p(FEPWIN|win, b->port + 1); + outb_p(FEPWIN | win, b->port + 1); } static void pcxem_memwinoff(struct board_info *b, unsigned int win) @@ -252,7 +253,7 @@ static void pcxem_memwinoff(struct board_info *b, unsigned int win) static void pcxem_globalwinon(struct channel *ch) { - outb_p( FEPWIN, (int)ch->board->port + 1); + outb_p(FEPWIN, (int)ch->board->port + 1); } static void pcxem_rxwinon(struct channel *ch) @@ -393,7 +394,7 @@ static struct channel *verifyChannel(struct tty_struct *tty) */ if (tty) { struct channel *ch = (struct channel *)tty->driver_data; - if ((ch >= &digi_channels[0]) && (ch < &digi_channels[nbdevs])) { + if (ch >= &digi_channels[0] && ch < &digi_channels[nbdevs]) { if (ch->magic == EPCA_MAGIC) return ch; } @@ -413,7 +414,7 @@ static void pc_sched_event(struct channel *ch, int event) static void epca_error(int line, char *msg) { - printk(KERN_ERR "epca_error (Digi): line = %d %s\n",line,msg); + printk(KERN_ERR "epca_error (Digi): line = %d %s\n", line, msg); } static void pc_close(struct tty_struct *tty, struct file *filp) @@ -424,7 +425,8 @@ static void pc_close(struct tty_struct *tty, struct file *filp) * verifyChannel returns the channel from the tty struct if it is * valid. This serves as a sanity check. */ - if ((ch = verifyChannel(tty)) != NULL) { + ch = verifyChannel(tty); + if (ch != NULL) { spin_lock_irqsave(&epca_lock, flags); if (tty_hung_up_p(filp)) { spin_unlock_irqrestore(&epca_lock, flags); @@ -439,7 +441,6 @@ static void pc_close(struct tty_struct *tty, struct file *filp) spin_unlock_irqrestore(&epca_lock, flags); return; } - /* Port open only once go ahead with shutdown & reset */ BUG_ON(ch->count < 0); @@ -454,9 +455,11 @@ static void pc_close(struct tty_struct *tty, struct file *filp) spin_unlock_irqrestore(&epca_lock, flags); if (ch->asyncflags & ASYNC_INITIALIZED) { - /* Setup an event to indicate when the transmit buffer empties */ + /* Setup an event to indicate when the + transmit buffer empties */ setup_empty_event(tty, ch); - tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */ + /* 30 seconds timeout */ + tty_wait_until_sent(tty, 3000); } pc_flush_buffer(tty); @@ -475,7 +478,7 @@ static void pc_close(struct tty_struct *tty, struct file *filp) wake_up_interruptible(&ch->open_wait); } ch->asyncflags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_INITIALIZED | - ASYNC_CLOSING); + ASYNC_CLOSING); wake_up_interruptible(&ch->close_wait); } } @@ -522,12 +525,12 @@ static void shutdown(struct channel *ch) static void pc_hangup(struct tty_struct *tty) { struct channel *ch; - /* * verifyChannel returns the channel from the tty struct if it is * valid. This serves as a sanity check. */ - if ((ch = verifyChannel(tty)) != NULL) { + ch = verifyChannel(tty); + if (ch != NULL) { unsigned long flags; pc_flush_buffer(tty); @@ -545,7 +548,7 @@ static void pc_hangup(struct tty_struct *tty) } static int pc_write(struct tty_struct *tty, - const unsigned char *buf, int bytesAvailable) + const unsigned char *buf, int bytesAvailable) { unsigned int head, tail; int dataLen; @@ -569,7 +572,8 @@ static int pc_write(struct tty_struct *tty, * verifyChannel returns the channel from the tty struct if it is * valid. This serves as a sanity check. */ - if ((ch = verifyChannel(tty)) == NULL) + ch = verifyChannel(tty); + if (ch == NULL) return 0; /* Make a pointer to the channel data structure found on the board. */ @@ -644,19 +648,17 @@ static int pc_write(struct tty_struct *tty, static int pc_write_room(struct tty_struct *tty) { - int remain; + int remain = 0; struct channel *ch; unsigned long flags; unsigned int head, tail; struct board_chan __iomem *bc; - - remain = 0; - /* * verifyChannel returns the channel from the tty struct if it is * valid. This serves as a sanity check. */ - if ((ch = verifyChannel(tty)) != NULL) { + ch = verifyChannel(tty); + if (ch != NULL) { spin_lock_irqsave(&epca_lock, flags); globalwinon(ch); @@ -668,8 +670,8 @@ static int pc_write_room(struct tty_struct *tty) tail = readw(&bc->tout); /* Wrap tail if necessary */ tail &= (ch->txbufsize - 1); - - if ((remain = tail - head - 1) < 0 ) + remain = tail - head - 1; + if (remain < 0) remain += ch->txbufsize; if (remain && (ch->statusflags & LOWWAIT) == 0) { @@ -691,12 +693,12 @@ static int pc_chars_in_buffer(struct tty_struct *tty) unsigned long flags; struct channel *ch; struct board_chan __iomem *bc; - /* * verifyChannel returns the channel from the tty struct if it is * valid. This serves as a sanity check. */ - if ((ch = verifyChannel(tty)) == NULL) + ch = verifyChannel(tty); + if (ch == NULL) return 0; spin_lock_irqsave(&epca_lock, flags); @@ -707,7 +709,8 @@ static int pc_chars_in_buffer(struct tty_struct *tty) head = readw(&bc->tin); ctail = readw(&ch->mailbox->cout); - if (tail == head && readw(&ch->mailbox->cin) == ctail && readb(&bc->tbusy) == 0) + if (tail == head && readw(&ch->mailbox->cin) == ctail && + readb(&bc->tbusy) == 0) chars = 0; else { /* Begin if some space on the card has been used */ head = readw(&bc->tin) & (ch->txbufsize - 1); @@ -717,7 +720,8 @@ static int pc_chars_in_buffer(struct tty_struct *tty) * pc_write_room here we are finding the amount of bytes in the * buffer filled. Not the amount of bytes empty. */ - if ((remain = tail - head - 1) < 0 ) + remain = tail - head - 1; + if (remain < 0) remain += ch->txbufsize; chars = (int)(ch->txbufsize - remain); /* @@ -728,7 +732,7 @@ static int pc_chars_in_buffer(struct tty_struct *tty) * transmit buffer empties. */ if (!(ch->statusflags & EMPTYWAIT)) - setup_empty_event(tty,ch); + setup_empty_event(tty, ch); } /* End if some space on the card has been used */ memoff(ch); spin_unlock_irqrestore(&epca_lock, flags); @@ -746,7 +750,8 @@ static void pc_flush_buffer(struct tty_struct *tty) * verifyChannel returns the channel from the tty struct if it is * valid. This serves as a sanity check. */ - if ((ch = verifyChannel(tty)) == NULL) + ch = verifyChannel(tty); + if (ch == NULL) return; spin_lock_irqsave(&epca_lock, flags); @@ -767,23 +772,25 @@ static void pc_flush_chars(struct tty_struct *tty) * verifyChannel returns the channel from the tty struct if it is * valid. This serves as a sanity check. */ - if ((ch = verifyChannel(tty)) != NULL) { + ch = verifyChannel(tty); + if (ch != NULL) { unsigned long flags; spin_lock_irqsave(&epca_lock, flags); /* * If not already set and the transmitter is busy setup an * event to indicate when the transmit empties. */ - if ((ch->statusflags & TXBUSY) && !(ch->statusflags & EMPTYWAIT)) - setup_empty_event(tty,ch); + if ((ch->statusflags & TXBUSY) && + !(ch->statusflags & EMPTYWAIT)) + setup_empty_event(tty, ch); spin_unlock_irqrestore(&epca_lock, flags); } } static int block_til_ready(struct tty_struct *tty, - struct file *filp, struct channel *ch) + struct file *filp, struct channel *ch) { - DECLARE_WAITQUEUE(wait,current); + DECLARE_WAITQUEUE(wait, current); int retval, do_clocal = 0; unsigned long flags; @@ -831,8 +838,7 @@ static int block_til_ready(struct tty_struct *tty, while (1) { set_current_state(TASK_INTERRUPTIBLE); if (tty_hung_up_p(filp) || - !(ch->asyncflags & ASYNC_INITIALIZED)) - { + !(ch->asyncflags & ASYNC_INITIALIZED)) { if (ch->asyncflags & ASYNC_HUP_NOTIFY) retval = -EAGAIN; else @@ -872,7 +878,7 @@ static int block_til_ready(struct tty_struct *tty, return 0; } -static int pc_open(struct tty_struct *tty, struct file * filp) +static int pc_open(struct tty_struct *tty, struct file *filp) { struct channel *ch; unsigned long flags; @@ -957,7 +963,7 @@ static int pc_open(struct tty_struct *tty, struct file * filp) * The below routine generally sets up parity, baud, flow control * issues, etc.... It effect both control flags and input flags. */ - epcaparam(tty,ch); + epcaparam(tty, ch); ch->asyncflags |= ASYNC_INITIALIZED; memoff(ch); spin_unlock_irqrestore(&epca_lock, flags); @@ -995,8 +1001,8 @@ static void __exit epca_module_exit(void) del_timer_sync(&epca_timer); - if (tty_unregister_driver(pc_driver) || tty_unregister_driver(pc_info)) - { + if (tty_unregister_driver(pc_driver) || + tty_unregister_driver(pc_info)) { printk(KERN_WARNING "epca: cleanup_module failed to un-register tty driver\n"); return; } @@ -1036,7 +1042,7 @@ static const struct tty_operations pc_ops = { .hangup = pc_hangup, }; -static int info_open(struct tty_struct *tty, struct file * filp) +static int info_open(struct tty_struct *tty, struct file *filp) { return 0; } @@ -1091,7 +1097,7 @@ static int __init pc_init(void) * Set up interrupt, we will worry about memory allocation in * post_fep_init. */ - printk(KERN_INFO "DIGI epca driver version %s loaded.\n",VERSION); + printk(KERN_INFO "DIGI epca driver version %s loaded.\n", VERSION); /* * NOTE : This code assumes that the number of ports found in the @@ -1244,7 +1250,7 @@ static int __init pc_init(void) if ((board_id & 0x30) == 0x30) bd->memory_seg = 0x8000; } else - printk(KERN_ERR "epca: Board at 0x%x doesn't appear to be an XI\n",(int)bd->port); + printk(KERN_ERR "epca: Board at 0x%x doesn't appear to be an XI\n", (int)bd->port); break; } } @@ -1318,12 +1324,12 @@ static void post_fep_init(unsigned int crd) */ /* PCI cards are already remapped at this point ISA are not */ bd->numports = readw(bd->re_map_membase + XEMPORTS); - epcaassert(bd->numports <= 64,"PCI returned a invalid number of ports"); + epcaassert(bd->numports <= 64, "PCI returned a invalid number of ports"); nbdevs += (bd->numports); } else { /* Fix up the mappings for ISA/EISA etc */ /* FIXME: 64K - can we be smarter ? */ - bd->re_map_membase = ioremap(bd->membase, 0x10000); + bd->re_map_membase = ioremap_nocache(bd->membase, 0x10000); } if (crd != 0) @@ -1354,7 +1360,8 @@ static void post_fep_init(unsigned int crd) * XEPORTS (address 0xc22) points at the number of channels the card * supports. (For 64XE, XI, XEM, and XR use 0xc02) */ - if ((bd->type == PCXEVE || bd->type == PCXE) && (readw(memaddr + XEPORTS) < 3)) + if ((bd->type == PCXEVE || bd->type == PCXE) && + (readw(memaddr + XEPORTS) < 3)) shrinkmem = 1; if (bd->type < PCIXEM) if (!request_region((int)bd->port, 4, board_desc[bd->type])) @@ -1453,10 +1460,12 @@ static void post_fep_init(unsigned int crd) case PCXEVE: case PCXE: - ch->txptr = memaddr + (((tseg - bd->memory_seg) << 4) & 0x1fff); + ch->txptr = memaddr + (((tseg - bd->memory_seg) << 4) + & 0x1fff); ch->txwin = FEPWIN | ((tseg - bd->memory_seg) >> 9); - ch->rxptr = memaddr + (((rseg - bd->memory_seg) << 4) & 0x1fff); - ch->rxwin = FEPWIN | ((rseg - bd->memory_seg) >>9 ); + ch->rxptr = memaddr + (((rseg - bd->memory_seg) << 4) + & 0x1fff); + ch->rxwin = FEPWIN | ((rseg - bd->memory_seg) >> 9); break; case PCXI: @@ -1510,8 +1519,9 @@ static void post_fep_init(unsigned int crd) } printk(KERN_INFO - "Digi PC/Xx Driver V%s: %s I/O = 0x%lx Mem = 0x%lx Ports = %d\n", - VERSION, board_desc[bd->type], (long)bd->port, (long)bd->membase, bd->numports); + "Digi PC/Xx Driver V%s: %s I/O = 0x%lx Mem = 0x%lx Ports = %d\n", + VERSION, board_desc[bd->type], (long)bd->port, + (long)bd->membase, bd->numports); memwinoff(bd, 0); } @@ -1519,7 +1529,7 @@ static void epcapoll(unsigned long ignored) { unsigned long flags; int crd; - volatile unsigned int head, tail; + unsigned int head, tail; struct channel *ch; struct board_info *bd; @@ -1585,7 +1595,9 @@ static void doevent(int crd) chan0 = card_ptr[crd]; epcaassert(chan0 <= &digi_channels[nbdevs - 1], "ch out of range"); assertgwinon(chan0); - while ((tail = readw(&chan0->mailbox->eout)) != (head = readw(&chan0->mailbox->ein))) { /* Begin while something in event queue */ + while ((tail = readw(&chan0->mailbox->eout)) != + (head = readw(&chan0->mailbox->ein))) { + /* Begin while something in event queue */ assertgwinon(chan0); eventbuf = bd->re_map_membase + tail + ISTART; /* Get the channel the event occurred on */ @@ -1609,7 +1621,8 @@ static void doevent(int crd) goto next; } - if ((bc = ch->brdchan) == NULL) + bc = ch->brdchan; + if (bc == NULL) goto next; if (event & DATA_IND) { /* Begin DATA_IND */ @@ -1621,10 +1634,11 @@ static void doevent(int crd) /* A modem signal change has been indicated */ ch->imodem = mstat; if (ch->asyncflags & ASYNC_CHECK_CD) { - if (mstat & ch->dcd) /* We are now receiving dcd */ + /* We are now receiving dcd */ + if (mstat & ch->dcd) wake_up_interruptible(&ch->open_wait); - else - pc_sched_event(ch, EPCA_EVENT_HANGUP); /* No dcd; hangup */ + else /* No dcd; hangup */ + pc_sched_event(ch, EPCA_EVENT_HANGUP); } } tty = ch->tty; @@ -1639,7 +1653,8 @@ static void doevent(int crd) tty_wakeup(tty); } } else if (event & EMPTYTX_IND) { - /* This event is generated by setup_empty_event */ + /* This event is generated by + setup_empty_event */ ch->statusflags &= ~TXBUSY; if (ch->statusflags & EMPTYWAIT) { ch->statusflags &= ~EMPTYWAIT; @@ -1647,7 +1662,7 @@ static void doevent(int crd) } } } - next: +next: globalwinon(ch); BUG_ON(!bc); writew(1, &bc->idata); @@ -1657,7 +1672,7 @@ static void doevent(int crd) } static void fepcmd(struct channel *ch, int cmd, int word_or_byte, - int byte2, int ncmds, int bytecmd) + int byte2, int ncmds, int bytecmd) { unchar __iomem *memaddr; unsigned int head, cmdTail, cmdStart, cmdMax; @@ -1682,8 +1697,10 @@ static void fepcmd(struct channel *ch, int cmd, int word_or_byte, memaddr = ch->board->re_map_membase; if (head >= (cmdMax - cmdStart) || (head & 03)) { - printk(KERN_ERR "line %d: Out of range, cmd = %x, head = %x\n", __LINE__, cmd, head); - printk(KERN_ERR "line %d: Out of range, cmdMax = %x, cmdStart = %x\n", __LINE__, cmdMax, cmdStart); + printk(KERN_ERR "line %d: Out of range, cmd = %x, head = %x\n", + __LINE__, cmd, head); + printk(KERN_ERR "line %d: Out of range, cmdMax = %x, cmdStart = %x\n", + __LINE__, cmdMax, cmdStart); return; } if (bytecmd) { @@ -1762,7 +1779,7 @@ static unsigned termios2digi_h(struct channel *ch, unsigned cflag) static unsigned termios2digi_i(struct channel *ch, unsigned iflag) { unsigned res = iflag & (IGNBRK | BRKINT | IGNPAR | PARMRK | - INPCK | ISTRIP|IXON|IXANY|IXOFF); + INPCK | ISTRIP | IXON | IXANY | IXOFF); if (ch->digiext.digi_flags & DIGI_AIXON) res |= IAIXON; return res; @@ -1876,8 +1893,10 @@ static void epcaparam(struct tty_struct *tty, struct channel *ch) * Command sets channels iflag structure on the board. Such * things as input soft flow control, handling of parity * errors, and break handling are all set here. + * + * break handling, parity handling, input stripping, + * flow control chars */ - /* break handling, parity handling, input stripping, flow control chars */ fepcmd(ch, SETIFLAGS, (unsigned int) ch->fepiflag, 0, 0, 0); } /* @@ -1973,7 +1992,7 @@ static void receive_data(struct channel *ch) return; /* If CREAD bit is off or device not open, set TX tail to head */ - if (!tty || !ts || !(ts->c_cflag & CREAD)) { + if (!tty || !ts || !(ts->c_cflag & CREAD)) { writew(head, &bc->rout); return; } @@ -1983,18 +2002,21 @@ static void receive_data(struct channel *ch) if (readb(&bc->orun)) { writeb(0, &bc->orun); - printk(KERN_WARNING "epca; overrun! DigiBoard device %s\n",tty->name); + printk(KERN_WARNING "epca; overrun! DigiBoard device %s\n", + tty->name); tty_insert_flip_char(tty, 0, TTY_OVERRUN); } rxwinon(ch); - while (bytesAvailable > 0) { /* Begin while there is data on the card */ + while (bytesAvailable > 0) { + /* Begin while there is data on the card */ wrapgap = (head >= tail) ? head - tail : ch->rxbufsize - tail; /* * Even if head has wrapped around only report the amount of * data to be equal to the size - tail. Remember memcpy can't * automaticly wrap around the receive buffer. */ - dataToRead = (wrapgap < bytesAvailable) ? wrapgap : bytesAvailable; + dataToRead = (wrapgap < bytesAvailable) ? wrapgap + : bytesAvailable; /* Make sure we don't overflow the buffer */ dataToRead = tty_prepare_flip_string(tty, &rptr, dataToRead); if (dataToRead == 0) @@ -2145,14 +2167,14 @@ static int pc_tiocmset(struct tty_struct *tty, struct file *file, * The below routine generally sets up parity, baud, flow control * issues, etc.... It effect both control flags and input flags. */ - epcaparam(tty,ch); + epcaparam(tty, ch); memoff(ch); spin_unlock_irqrestore(&epca_lock, flags); return 0; } -static int pc_ioctl(struct tty_struct *tty, struct file * file, - unsigned int cmd, unsigned long arg) +static int pc_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) { digiflow_t dflow; int retval; @@ -2167,7 +2189,6 @@ static int pc_ioctl(struct tty_struct *tty, struct file * file, bc = ch->brdchan; else return -EINVAL; - /* * For POSIX compliance we need to add more ioctls. See tty_ioctl.c in * /usr/src/linux/drivers/char for a good example. In particular think @@ -2178,9 +2199,10 @@ static int pc_ioctl(struct tty_struct *tty, struct file * file, retval = tty_check_change(tty); if (retval) return retval; - /* Setup an event to indicate when the transmit buffer empties */ + /* Setup an event to indicate when the transmit + buffer empties */ spin_lock_irqsave(&epca_lock, flags); - setup_empty_event(tty,ch); + setup_empty_event(tty, ch); spin_unlock_irqrestore(&epca_lock, flags); tty_wait_until_sent(tty, 0); if (!arg) @@ -2190,10 +2212,10 @@ static int pc_ioctl(struct tty_struct *tty, struct file * file, retval = tty_check_change(tty); if (retval) return retval; - - /* Setup an event to indicate when the transmit buffer empties */ + /* Setup an event to indicate when the transmit buffer + empties */ spin_lock_irqsave(&epca_lock, flags); - setup_empty_event(tty,ch); + setup_empty_event(tty, ch); spin_unlock_irqrestore(&epca_lock, flags); tty_wait_until_sent(tty, 0); digi_send_break(ch, arg ? arg*(HZ/10) : HZ/4); @@ -2232,9 +2254,10 @@ static int pc_ioctl(struct tty_struct *tty, struct file * file, case DIGI_SETAF: lock_kernel(); if (cmd == DIGI_SETAW) { - /* Setup an event to indicate when the transmit buffer empties */ + /* Setup an event to indicate when the transmit + buffer empties */ spin_lock_irqsave(&epca_lock, flags); - setup_empty_event(tty,ch); + setup_empty_event(tty, ch); spin_unlock_irqrestore(&epca_lock, flags); tty_wait_until_sent(tty, 0); } else { @@ -2264,7 +2287,7 @@ static int pc_ioctl(struct tty_struct *tty, struct file * file, * control issues, etc.... It effect both control flags and * input flags. */ - epcaparam(tty,ch); + epcaparam(tty, ch); memoff(ch); spin_unlock_irqrestore(&epca_lock, flags); break; @@ -2300,18 +2323,21 @@ static int pc_ioctl(struct tty_struct *tty, struct file * file, if (copy_from_user(&dflow, argp, sizeof(dflow))) return -EFAULT; - if (dflow.startc != startc || dflow.stopc != stopc) { /* Begin if setflow toggled */ + if (dflow.startc != startc || dflow.stopc != stopc) { + /* Begin if setflow toggled */ spin_lock_irqsave(&epca_lock, flags); globalwinon(ch); if (cmd == DIGI_SETFLOW) { ch->fepstartc = ch->startc = dflow.startc; ch->fepstopc = ch->stopc = dflow.stopc; - fepcmd(ch, SONOFFC, ch->fepstartc, ch->fepstopc, 0, 1); + fepcmd(ch, SONOFFC, ch->fepstartc, + ch->fepstopc, 0, 1); } else { ch->fepstartca = ch->startca = dflow.startc; ch->fepstopca = ch->stopca = dflow.stopc; - fepcmd(ch, SAUXONOFFC, ch->fepstartca, ch->fepstopca, 0, 1); + fepcmd(ch, SAUXONOFFC, ch->fepstartca, + ch->fepstopca, 0, 1); } if (ch->statusflags & TXSTOPPED) @@ -2335,7 +2361,9 @@ static void pc_set_termios(struct tty_struct *tty, struct ktermios *old_termios) * verifyChannel returns the channel from the tty struct if it is * valid. This serves as a sanity check. */ - if ((ch = verifyChannel(tty)) != NULL) { /* Begin if channel valid */ + ch = verifyChannel(tty); + + if (ch != NULL) { /* Begin if channel valid */ spin_lock_irqsave(&epca_lock, flags); globalwinon(ch); epcaparam(tty, ch); @@ -2362,7 +2390,7 @@ static void do_softint(struct work_struct *work) if (tty && tty->driver_data) { if (test_and_clear_bit(EPCA_EVENT_HANGUP, &ch->event)) { - tty_hangup(tty); /* FIXME: module removal race here - AKPM */ + tty_hangup(tty); wake_up_interruptible(&ch->open_wait); ch->asyncflags &= ~ASYNC_NORMAL_ACTIVE; } @@ -2382,9 +2410,11 @@ static void pc_stop(struct tty_struct *tty) * verifyChannel returns the channel from the tty struct if it is * valid. This serves as a sanity check. */ - if ((ch = verifyChannel(tty)) != NULL) { + ch = verifyChannel(tty); + if (ch != NULL) { spin_lock_irqsave(&epca_lock, flags); - if ((ch->statusflags & TXSTOPPED) == 0) { /* Begin if transmit stop requested */ + if ((ch->statusflags & TXSTOPPED) == 0) { + /* Begin if transmit stop requested */ globalwinon(ch); /* STOP transmitting now !! */ fepcmd(ch, PAUSETX, 0, 0, 0, 0); @@ -2402,11 +2432,14 @@ static void pc_start(struct tty_struct *tty) * verifyChannel returns the channel from the tty struct if it is * valid. This serves as a sanity check. */ - if ((ch = verifyChannel(tty)) != NULL) { + ch = verifyChannel(tty); + if (ch != NULL) { unsigned long flags; spin_lock_irqsave(&epca_lock, flags); - /* Just in case output was resumed because of a change in Digi-flow */ - if (ch->statusflags & TXSTOPPED) { /* Begin transmit resume requested */ + /* Just in case output was resumed because of a change + in Digi-flow */ + if (ch->statusflags & TXSTOPPED) { + /* Begin transmit resume requested */ struct board_chan __iomem *bc; globalwinon(ch); bc = ch->brdchan; @@ -2436,7 +2469,8 @@ static void pc_throttle(struct tty_struct *tty) * verifyChannel returns the channel from the tty struct if it is * valid. This serves as a sanity check. */ - if ((ch = verifyChannel(tty)) != NULL) { + ch = verifyChannel(tty); + if (ch != NULL) { spin_lock_irqsave(&epca_lock, flags); if ((ch->statusflags & RXSTOPPED) == 0) { globalwinon(ch); @@ -2456,8 +2490,10 @@ static void pc_unthrottle(struct tty_struct *tty) * verifyChannel returns the channel from the tty struct if it is * valid. This serves as a sanity check. */ - if ((ch = verifyChannel(tty)) != NULL) { - /* Just in case output was resumed because of a change in Digi-flow */ + ch = verifyChannel(tty); + if (ch != NULL) { + /* Just in case output was resumed because of a change + in Digi-flow */ spin_lock_irqsave(&epca_lock, flags); if (ch->statusflags & RXSTOPPED) { globalwinon(ch); @@ -2502,7 +2538,7 @@ static void setup_empty_event(struct tty_struct *tty, struct channel *ch) memoff(ch); } -void epca_setup(char *str, int *ints) +static void epca_setup(char *str, int *ints) { struct board_info board; int index, loop, last; @@ -2531,14 +2567,16 @@ void epca_setup(char *str, int *ints) * instructing the driver to ignore epcaconfig.) For * this reason we check for 2. */ - if (board.status == 2) { /* Begin ignore epcaconfig as well as lilo cmd line */ + if (board.status == 2) { + /* Begin ignore epcaconfig as well as lilo cmd line */ nbdevs = 0; num_cards = 0; return; } /* End ignore epcaconfig as well as lilo cmd line */ if (board.status > 2) { - printk(KERN_ERR "epca_setup: Invalid board status 0x%x\n", board.status); + printk(KERN_ERR "epca_setup: Invalid board status 0x%x\n", + board.status); invalid_lilo_config = 1; setup_error_code |= INVALID_BOARD_STATUS; return; @@ -2592,7 +2630,8 @@ void epca_setup(char *str, int *ints) case 6: board.membase = ints[index]; if (ints[index] <= 0) { - printk(KERN_ERR "epca_setup: Invalid memory base 0x%x\n",(unsigned int)board.membase); + printk(KERN_ERR "epca_setup: Invalid memory base 0x%x\n", + (unsigned int)board.membase); invalid_lilo_config = 1; setup_error_code |= INVALID_MEM_BASE; return; @@ -2723,7 +2762,7 @@ void epca_setup(char *str, int *ints) t2++; if (*t2) { - printk(KERN_ERR "epca_setup: Invalid memory base %s\n",str); + printk(KERN_ERR "epca_setup: Invalid memory base %s\n", str); invalid_lilo_config = 1; setup_error_code |= INVALID_MEM_BASE; return; @@ -2745,7 +2784,7 @@ void epca_setup(char *str, int *ints) /* I should REALLY validate the stuff here */ /* Copies our local copy of board into boards */ - memcpy((void *)&boards[num_cards],(void *)&board, sizeof(board)); + memcpy((void *)&boards[num_cards], (void *)&board, sizeof(board)); /* Does this get called once per lilo arg are what ? */ printk(KERN_INFO "PC/Xx: Added board %i, %s %i ports at 0x%4.4X base 0x%6.6X\n", num_cards, board_desc[board.type], @@ -2786,9 +2825,9 @@ static int __devinit epca_init_one(struct pci_dev *pdev, if (board_idx >= MAXBOARDS) goto err_out; - addr = pci_resource_start (pdev, epca_info_tbl[info_idx].bar_idx); + addr = pci_resource_start(pdev, epca_info_tbl[info_idx].bar_idx); if (!addr) { - printk (KERN_ERR PFX "PCI region #%d not available (size 0)\n", + printk(KERN_ERR PFX "PCI region #%d not available (size 0)\n", epca_info_tbl[info_idx].bar_idx); goto err_out; } @@ -2799,28 +2838,29 @@ static int __devinit epca_init_one(struct pci_dev *pdev, boards[board_idx].port = addr + PCI_IO_OFFSET; boards[board_idx].membase = addr; - if (!request_mem_region (addr + PCI_IO_OFFSET, 0x200000, "epca")) { - printk (KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n", + if (!request_mem_region(addr + PCI_IO_OFFSET, 0x200000, "epca")) { + printk(KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n", 0x200000, addr + PCI_IO_OFFSET); goto err_out; } - boards[board_idx].re_map_port = ioremap(addr + PCI_IO_OFFSET, 0x200000); + boards[board_idx].re_map_port = ioremap_nocache(addr + PCI_IO_OFFSET, + 0x200000); if (!boards[board_idx].re_map_port) { - printk (KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n", + printk(KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n", 0x200000, addr + PCI_IO_OFFSET); goto err_out_free_pciio; } - if (!request_mem_region (addr, 0x200000, "epca")) { - printk (KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n", + if (!request_mem_region(addr, 0x200000, "epca")) { + printk(KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n", 0x200000, addr); goto err_out_free_iounmap; } - boards[board_idx].re_map_membase = ioremap(addr, 0x200000); + boards[board_idx].re_map_membase = ioremap_nocache(addr, 0x200000); if (!boards[board_idx].re_map_membase) { - printk (KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n", + printk(KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n", 0x200000, addr + PCI_IO_OFFSET); goto err_out_free_memregion; } @@ -2837,11 +2877,11 @@ static int __devinit epca_init_one(struct pci_dev *pdev, return 0; err_out_free_memregion: - release_mem_region (addr, 0x200000); + release_mem_region(addr, 0x200000); err_out_free_iounmap: - iounmap (boards[board_idx].re_map_port); + iounmap(boards[board_idx].re_map_port); err_out_free_pciio: - release_mem_region (addr + PCI_IO_OFFSET, 0x200000); + release_mem_region(addr + PCI_IO_OFFSET, 0x200000); err_out: return -ENODEV; } @@ -2859,7 +2899,7 @@ MODULE_DEVICE_TABLE(pci, epca_pci_tbl); static int __init init_PCI(void) { - memset (&epca_driver, 0, sizeof (epca_driver)); + memset(&epca_driver, 0, sizeof(epca_driver)); epca_driver.name = "epca"; epca_driver.id_table = epca_pci_tbl; epca_driver.probe = epca_init_one;