From: Dirk Hohndel Date: Tue, 29 Sep 2009 01:43:57 +0000 (-0400) Subject: tree-wide: fix a very frequent spelling mistake X-Git-Tag: v2.6.33-rc1~342^2^2~39 X-Git-Url: http://ftp.safe.ca/?p=safe%2Fjmp%2Flinux-2.6;a=commitdiff_plain;h=06fe9fb4182177fb046e6d934f80254dd90956ea tree-wide: fix a very frequent spelling mistake something-bility is spelled as something-blity so a grep for 'blit' would find these lines this is so trivial that I didn't split it by subsystem / copy additional maintainers - all changes are to comments The only purpose is to get fewer false positives when grepping around the kernel sources. Signed-off-by: Dirk Hohndel Signed-off-by: Jiri Kosina --- diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c index 75099ef..f9f6783 100644 --- a/arch/parisc/kernel/perf.c +++ b/arch/parisc/kernel/perf.c @@ -24,7 +24,7 @@ * * This driver programs the PCX-U/PCX-W performance counters * on the PA-RISC 2.0 chips. The driver keeps all images now - * internally to the kernel to hopefully eliminate the possiblity + * internally to the kernel to hopefully eliminate the possibility * of a bad image halting the CPU. Also, there are different * images for the PCX-W and later chips vs the PCX-U chips. * diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index 137dc22..d84d192 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -721,7 +721,7 @@ static int __init vdso_init(void) #ifdef CONFIG_PPC64 /* - * Fill up the "systemcfg" stuff for backward compatiblity + * Fill up the "systemcfg" stuff for backward compatibility */ strcpy((char *)vdso_data->eye_catcher, "SYSTEMCFG:PPC64"); vdso_data->version.major = SYSTEMCFG_MAJOR; diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index ae06c62..52c98ed 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -248,7 +248,7 @@ static int pm_rtas_activate_signals(u32 node, u32 count) * There is no debug setup required for the cycles event. * Note that only events in the same group can be used. * Otherwise, there will be conflicts in correctly routing - * the signals on the debug bus. It is the responsiblity + * the signals on the debug bus. It is the responsibility * of the OProfile user tool to check the events are in * the same group. */ diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c index 8e67d5c..6bd5f88 100644 --- a/drivers/char/tty_ioctl.c +++ b/drivers/char/tty_ioctl.c @@ -315,7 +315,7 @@ EXPORT_SYMBOL(tty_termios_input_baud_rate); * For maximal back compatibility with legacy SYS5/POSIX *nix behaviour * we need to carefully set the bits when the user does not get the * desired speed. We allow small margins and preserve as much of possible - * of the input intent to keep compatiblity. + * of the input intent to keep compatibility. * * Locking: Caller should hold termios lock. This is already held * when calling this function from the driver termios handler. diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c index 90b56ed..507e13d 100644 --- a/drivers/isdn/i4l/isdn_net.c +++ b/drivers/isdn/i4l/isdn_net.c @@ -1563,7 +1563,7 @@ isdn_net_ciscohdlck_slarp_send_keepalive(unsigned long data) *(__be32 *)(p + 4) = cpu_to_be32(CISCO_SLARP_KEEPALIVE); *(__be32 *)(p + 8) = cpu_to_be32(lp->cisco_myseq); *(__be32 *)(p + 12) = cpu_to_be32(lp->cisco_yourseq); - *(__be16 *)(p + 16) = cpu_to_be16(0xffff); // reliablity, always 0xffff + *(__be16 *)(p + 16) = cpu_to_be16(0xffff); // reliability, always 0xffff p += 18; isdn_net_write_super(lp, skb); diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index ed10381..e412980 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -988,7 +988,7 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv) goto bad_cipher; } - /* Compatiblity mode for old dm-crypt cipher strings */ + /* Compatibility mode for old dm-crypt cipher strings */ if (!chainmode || (strcmp(chainmode, "plain") == 0 && !ivmode)) { chainmode = "cbc"; ivmode = "plain"; diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c index 0241a7c..8b8558f 100644 --- a/drivers/media/dvb/dvb-core/dvb_net.c +++ b/drivers/media/dvb/dvb-core/dvb_net.c @@ -1396,7 +1396,7 @@ static int dvb_net_do_ioctl(struct inode *inode, struct file *file, return ret; } - /* binary compatiblity cruft */ + /* binary compatibility cruft */ case __NET_ADD_IF_OLD: { struct __dvb_net_if_old *dvbnetif = parg; diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c index 75fa32e..685cc3a 100644 --- a/drivers/net/tokenring/ibmtr.c +++ b/drivers/net/tokenring/ibmtr.c @@ -96,7 +96,7 @@ * * Change by Mike Sullivan et al.: * + added turbo card support. No need to use lanaid to configure - * the adapter into isa compatiblity mode. + * the adapter into isa compatibility mode. * * Changes by Burt Silverman to allow the computer to behave nicely when * a cable is pulled or not in place, or a PCMCIA card is removed hot. diff --git a/drivers/net/wireless/orinoco/hermes_dld.c b/drivers/net/wireless/orinoco/hermes_dld.c index a3eefe1..84200da 100644 --- a/drivers/net/wireless/orinoco/hermes_dld.c +++ b/drivers/net/wireless/orinoco/hermes_dld.c @@ -550,7 +550,7 @@ static const struct { \ #define DEFAULT_PDR(pid) default_pdr_data_##pid -/* HWIF Compatiblity */ +/* HWIF Compatibility */ DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00"); /* PPPPSign */ @@ -656,7 +656,7 @@ int hermes_apply_pda_with_defaults(hermes_t *hw, record_id + 1, pdi); } break; - case 0x5: /* HWIF Compatiblity */ + case 0x5: /* HWIF Compatibility */ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005); break; case 0x108: /* PPPPSign */ diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index 36c21b1..b59e240 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -732,7 +732,7 @@ static int twa_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int break; case TW_IOCTL_GET_COMPATIBILITY_INFO: tw_ioctl->driver_command.status = 0; - /* Copy compatiblity struct into ioctl data buffer */ + /* Copy compatibility struct into ioctl data buffer */ tw_compat_info = (TW_Compatibility_Info *)tw_ioctl->data_buffer; memcpy(tw_compat_info, &tw_dev->tw_compat_info, sizeof(TW_Compatibility_Info)); break; diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c index faa0fcf..ff04821 100644 --- a/drivers/scsi/3w-xxxx.c +++ b/drivers/scsi/3w-xxxx.c @@ -8,7 +8,7 @@ Copyright (C) 1999-2009 3ware Inc. - Kernel compatiblity By: Andre Hedrick + Kernel compatibility By: Andre Hedrick Non-Copyright (C) 2000 Andre Hedrick Further tiny build fixes and trivial hoovering Alan Cox diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c index 2be7d5b..2c98a6e 100644 --- a/drivers/scsi/nsp32.c +++ b/drivers/scsi/nsp32.c @@ -1419,7 +1419,7 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id) nsp32_msg(KERN_ERR, "Received unexpected BMCNTERR IRQ! "); /* * TODO: To be implemented improving bus master - * transfer reliablity when BMCNTERR is occurred in + * transfer reliability when BMCNTERR is occurred in * AutoSCSI phase described in specification. */ } diff --git a/drivers/uwb/neh.c b/drivers/uwb/neh.c index 0af8916..78510a1 100644 --- a/drivers/uwb/neh.c +++ b/drivers/uwb/neh.c @@ -150,7 +150,7 @@ void uwb_rc_neh_put(struct uwb_rc_neh *neh) * 0xff is invalid, so they must not be used. Initialization * fills up those two in the bitmap so they are not allocated. * - * We spread the allocation around to reduce the posiblity of two + * We spread the allocation around to reduce the possibility of two * consecutive opened @neh's getting the same context ID assigned (to * avoid surprises with late events that timed out long time ago). So * first we search from where @rc->ctx_roll is, if not found, we diff --git a/net/sched/act_api.c b/net/sched/act_api.c index 2dfb3e7..5364d0b 100644 --- a/net/sched/act_api.c +++ b/net/sched/act_api.c @@ -598,7 +598,7 @@ int tcf_action_copy_stats(struct sk_buff *skb, struct tc_action *a, goto errout; /* compat_mode being true specifies a call that is supposed - * to add additional backward compatiblity statistic TLVs. + * to add additional backward compatibility statistic TLVs. */ if (compat_mode) { if (a->type == TCA_OLD_COMPAT) diff --git a/sound/pci/ice1712/juli.c b/sound/pci/ice1712/juli.c index fd948bf..9c0f78e 100644 --- a/sound/pci/ice1712/juli.c +++ b/sound/pci/ice1712/juli.c @@ -380,7 +380,7 @@ static struct snd_kcontrol_new juli_mute_controls[] __devinitdata = { * inputs) are fed from Xilinx. * * I even checked traces on board and coded a support in driver for - * an alternative possiblity - the unused I2S ICE output channels + * an alternative possibility - the unused I2S ICE output channels * switched to HW-IN/SPDIF-IN and providing the monitoring signal to * the DAC - to no avail. The I2S outputs seem to be unconnected. *