Blackfin arch: SPI_MMC is now mainlined MMC_SPI

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index b044de4..41f2eac 100644 (file)
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -182,9 +182,9 @@ static struct bfin5xx_spi_chip spi_switch_info = {
 #endif
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+       .enable_dma = 0,
        .bits_per_word = 8,
 };
 #endif
@@ -276,23 +276,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-       {
-               .modalias = "spi_mmc_dummy",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 0,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc",
+               .modalias = "mmc_spi",
                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 5,
+               .controller_data = &mmc_spi_chip_info,
                .mode = SPI_MODE_3,
        },
 #endif

diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 856c097..48e69ee 100644 (file)
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -487,9 +487,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+       .enable_dma = 0,
        .bits_per_word = 8,
 };
 #endif
@@ -585,23 +585,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                .controller_data = &ad9960_spi_chip_info,
        },
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc_dummy",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 0,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
-       {
-               .modalias = "spi_mmc",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+               .modalias = "mmc_spi",
+               .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 5,
+               .controller_data = &mmc_spi_chip_info,
                .mode = SPI_MODE_3,
        },
 #endif

diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 83606fc..7fe480e 100644 (file)
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -256,9 +256,9 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+       .enable_dma = 0,
        .bits_per_word = 8,
 };
 #endif
@@ -366,23 +366,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc_dummy",
+               .modalias = "mmc_spi",
                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
-               .chip_select = 0,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
-       {
-               .modalias = "spi_mmc",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 5,
+               .controller_data = &mmc_spi_chip_info,
                .mode = SPI_MODE_3,
        },
 #endif

diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 015c18f..0765872 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -101,9 +101,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+       .enable_dma = 0,
        .bits_per_word = 8,
 };
 #endif
@@ -129,23 +129,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-       {
-               .modalias = "spi_mmc_dummy",
-               .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 0,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc",
+               .modalias = "mmc_spi",
                .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 5,
+               .controller_data = &mmc_spi_chip_info,
                .mode = SPI_MODE_3,
        },
 #endif

diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index e7061c7..e897487 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -96,9 +96,9 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+       .enable_dma = 0,
        .bits_per_word = 8,
 };
 #endif
@@ -138,23 +138,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-       {
-               .modalias = "spi_mmc_dummy",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 0,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc",
+               .modalias = "mmc_spi",
                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 5,
+               .controller_data = &mmc_spi_chip_info,
                .mode = SPI_MODE_3,
        },
 #endif

diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index e30b1b7..f19b633 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -127,8 +127,8 @@ static struct platform_device dm9000_device2 = {
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* all SPI peripherals info goes here */
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 /*
  * CPOL (Clock Polarity)
  *  0 - Active high SCK
@@ -152,14 +152,13 @@ static struct bfin5xx_spi_chip spi_mmc_chip_info = {
 /* Notice: for blackfin, the speed_hz is the value of register
  * SPI_BAUD, not the real baudrate */
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc",
+               .modalias = "mmc_spi",
                .max_speed_hz = 2,
                .bus_num = 1,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 5,
+               .controller_data = &mmc_spi_chip_info,
        },
 #endif
 };

diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 9cd8fb2..41c75b9 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+       .enable_dma = 0,
        .bits_per_word = 8,
 };
 #endif
@@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-       {
-               .modalias = "spi_mmc_dummy",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 7,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+               .modalias = "mmc_spi",
+               .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 1,
+               .controller_data = &mmc_spi_chip_info,
                .mode = SPI_MODE_3,
        },
 #endif

diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index db7d3a3..3c15981 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -134,9 +134,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+       .enable_dma = 0,
        .bits_per_word = 8,
 };
 #endif
@@ -156,23 +156,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc_dummy",
+               .modalias = "mmc_spi",
                .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
-               .chip_select = 0,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
-       {
-               .modalias = "spi_mmc",
-               .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 5,
+               .controller_data = &mmc_spi_chip_info,
                .mode = SPI_MODE_3,
        },
 #endif

diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 590eb3a..4e1de1e 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -289,9 +289,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+       .enable_dma = 0,
        .bits_per_word = 8,
 };
 #endif
@@ -364,23 +364,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                .controller_data = &ad9960_spi_chip_info,
        },
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-       {
-               .modalias = "spi_mmc_dummy",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 7,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc",
+               .modalias = "mmc_spi",
                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 5,
+               .controller_data = &mmc_spi_chip_info,
                .mode = SPI_MODE_3,
        },
 #endif

diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 3f4f203..53ad10f 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+       .enable_dma = 0,
        .bits_per_word = 8,
 };
 #endif
@@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-       {
-               .modalias = "spi_mmc_dummy",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 7,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc",
+               .modalias = "mmc_spi",
                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 5,
+               .controller_data = &mmc_spi_chip_info,
                .mode = SPI_MODE_3,
        },
 #endif

diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 6880d1e..f623c6b 100644 (file)
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -105,9 +105,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+       .enable_dma = 0,
        .bits_per_word = 8,
 };
 #endif
@@ -155,14 +155,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                .controller_data = &ad9960_spi_chip_info,
        },
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc",
+               .modalias = "mmc_spi",
                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 5,
+               .controller_data = &mmc_spi_chip_info,
                .mode = SPI_MODE_3,
        },
 #endif