Operating System Writer's Guide" (Intel document number 242692),
section 11.11.7
- This was cleaned and made readable by Patrick Mochel <mochel@osdl.org>
- on 6-7 March 2002.
- Source: Intel Architecture Software Developers Manual, Volume 3:
+ This was cleaned and made readable by Patrick Mochel <mochel@osdl.org>
+ on 6-7 March 2002.
+ Source: Intel Architecture Software Developers Manual, Volume 3:
System Programming Guide; Section 9.11. (1997 edition - PPro).
*/
+#define DEBUG
+
+#include <linux/types.h> /* FIXME: kvm_para.h needs this */
+
+#include <linux/kvm_para.h>
+#include <linux/uaccess.h>
#include <linux/module.h>
+#include <linux/mutex.h>
#include <linux/init.h>
+#include <linux/sort.h>
+#include <linux/cpu.h>
#include <linux/pci.h>
#include <linux/smp.h>
-#include <linux/cpu.h>
-#include <linux/mutex.h>
-#include <linux/sort.h>
+#include <asm/processor.h>
#include <asm/e820.h>
#include <asm/mtrr.h>
-#include <asm/uaccess.h>
-#include <asm/processor.h>
#include <asm/msr.h>
-#include <asm/kvm_para.h>
+
#include "mtrr.h"
-u32 num_var_ranges = 0;
+u32 num_var_ranges;
unsigned int mtrr_usage_table[MTRR_MAX_VAR_RANGES];
static DEFINE_MUTEX(mtrr_mutex);
u64 size_or_mask, size_and_mask;
-static struct mtrr_ops * mtrr_ops[X86_VENDOR_NUM] = {};
+static struct mtrr_ops *mtrr_ops[X86_VENDOR_NUM];
-struct mtrr_ops * mtrr_if = NULL;
+struct mtrr_ops *mtrr_if;
static void set_mtrr(unsigned int reg, unsigned long base,
unsigned long size, mtrr_type type);
-void set_mtrr_ops(struct mtrr_ops * ops)
+void set_mtrr_ops(struct mtrr_ops *ops)
{
if (ops->vendor && ops->vendor < X86_VENDOR_NUM)
mtrr_ops[ops->vendor] = ops;
{
struct pci_dev *dev;
u8 rev;
-
- if ((dev = pci_get_class(PCI_CLASS_BRIDGE_HOST << 8, NULL)) != NULL) {
- /* ServerWorks LE chipsets < rev 6 have problems with write-combining
- Don't allow it and leave room for other chipsets to be tagged */
+
+ dev = pci_get_class(PCI_CLASS_BRIDGE_HOST << 8, NULL);
+ if (dev != NULL) {
+ /*
+ * ServerWorks LE chipsets < rev 6 have problems with
+ * write-combining. Don't allow it and leave room for other
+ * chipsets to be tagged
+ */
if (dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
dev->device == PCI_DEVICE_ID_SERVERWORKS_LE) {
pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev);
if (rev <= 5) {
- printk(KERN_INFO "mtrr: Serverworks LE rev < 6 detected. Write-combining disabled.\n");
+ pr_info("mtrr: Serverworks LE rev < 6 detected. Write-combining disabled.\n");
pci_dev_put(dev);
return 0;
}
}
- /* Intel 450NX errata # 23. Non ascending cacheline evictions to
- write combining memory may resulting in data corruption */
+ /*
+ * Intel 450NX errata # 23. Non ascending cacheline evictions to
+ * write combining memory may resulting in data corruption
+ */
if (dev->vendor == PCI_VENDOR_ID_INTEL &&
dev->device == PCI_DEVICE_ID_INTEL_82451NX) {
- printk(KERN_INFO "mtrr: Intel 450NX MMC detected. Write-combining disabled.\n");
+ pr_info("mtrr: Intel 450NX MMC detected. Write-combining disabled.\n");
pci_dev_put(dev);
return 0;
}
pci_dev_put(dev);
- }
- return (mtrr_if->have_wrcomb ? mtrr_if->have_wrcomb() : 0);
+ }
+ return mtrr_if->have_wrcomb ? mtrr_if->have_wrcomb() : 0;
}
/* This function returns the number of variable MTRRs */
{
unsigned long config = 0, dummy;
- if (use_intel()) {
+ if (use_intel())
rdmsr(MSR_MTRRcap, config, dummy);
- } else if (is_cpu(AMD))
+ else if (is_cpu(AMD))
config = 2;
else if (is_cpu(CYRIX) || is_cpu(CENTAUR))
config = 8;
+
num_var_ranges = config & 0xff;
}
mtrr_type smp_type;
};
+/**
+ * ipi_handler - Synchronisation handler. Executed by "other" CPUs.
+ *
+ * Returns nothing.
+ */
static void ipi_handler(void *info)
-/* [SUMMARY] Synchronisation handler. Executed by "other" CPUs.
- [RETURNS] Nothing.
-*/
{
#ifdef CONFIG_SMP
struct set_mtrr_data *data = info;
local_irq_save(flags);
atomic_dec(&data->count);
- while(!atomic_read(&data->gate))
+ while (!atomic_read(&data->gate))
cpu_relax();
/* The master has cleared me to execute */
- if (data->smp_reg != ~0U)
- mtrr_if->set(data->smp_reg, data->smp_base,
+ if (data->smp_reg != ~0U) {
+ mtrr_if->set(data->smp_reg, data->smp_base,
data->smp_size, data->smp_type);
- else
+ } else {
mtrr_if->set_all();
+ }
atomic_dec(&data->count);
- while(atomic_read(&data->gate))
+ while (atomic_read(&data->gate))
cpu_relax();
atomic_dec(&data->count);
#endif
}
-static inline int types_compatible(mtrr_type type1, mtrr_type type2) {
+static inline int types_compatible(mtrr_type type1, mtrr_type type2)
+{
return type1 == MTRR_TYPE_UNCACHABLE ||
type2 == MTRR_TYPE_UNCACHABLE ||
(type1 == MTRR_TYPE_WRTHROUGH && type2 == MTRR_TYPE_WRBACK) ||
* @type: mtrr type
*
* This is kinda tricky, but fortunately, Intel spelled it out for us cleanly:
- *
+ *
* 1. Send IPI to do the following:
* 2. Disable Interrupts
- * 3. Wait for all procs to do so
+ * 3. Wait for all procs to do so
* 4. Enter no-fill cache mode
* 5. Flush caches
* 6. Clear PGE bit
* 10. Enable all range registers
* 11. Flush all TLBs and caches again
* 12. Enter normal cache mode and reenable caching
- * 13. Set PGE
+ * 13. Set PGE
* 14. Wait for buddies to catch up
* 15. Enable interrupts.
- *
+ *
* What does that mean for us? Well, first we set data.count to the number
* of CPUs. As each CPU disables interrupts, it'll decrement it once. We wait
* until it hits 0 and proceed. We set the data.gate flag and reset data.count.
- * Meanwhile, they are waiting for that flag to be set. Once it's set, each
- * CPU goes through the transition of updating MTRRs. The CPU vendors may each do it
- * differently, so we call mtrr_if->set() callback and let them take care of it.
- * When they're done, they again decrement data->count and wait for data.gate to
- * be reset.
- * When we finish, we wait for data.count to hit 0 and toggle the data.gate flag.
+ * Meanwhile, they are waiting for that flag to be set. Once it's set, each
+ * CPU goes through the transition of updating MTRRs.
+ * The CPU vendors may each do it differently,
+ * so we call mtrr_if->set() callback and let them take care of it.
+ * When they're done, they again decrement data->count and wait for data.gate
+ * to be reset.
+ * When we finish, we wait for data.count to hit 0 and toggle the data.gate flag
* Everyone then enables interrupts and we all continue on.
*
* Note that the mechanism is the same for UP systems, too; all the SMP stuff
* becomes nops.
*/
-static void set_mtrr(unsigned int reg, unsigned long base,
- unsigned long size, mtrr_type type)
+static void
+set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type type)
{
struct set_mtrr_data data;
unsigned long flags;
data.smp_size = size;
data.smp_type = type;
atomic_set(&data.count, num_booting_cpus() - 1);
- /* make sure data.count is visible before unleashing other CPUs */
+
+ /* Make sure data.count is visible before unleashing other CPUs */
smp_wmb();
- atomic_set(&data.gate,0);
+ atomic_set(&data.gate, 0);
- /* Start the ball rolling on other CPUs */
+ /* Start the ball rolling on other CPUs */
if (smp_call_function(ipi_handler, &data, 0) != 0)
panic("mtrr: timed out waiting for other CPUs\n");
local_irq_save(flags);
- while(atomic_read(&data.count))
+ while (atomic_read(&data.count))
cpu_relax();
- /* ok, reset count and toggle gate */
+ /* Ok, reset count and toggle gate */
atomic_set(&data.count, num_booting_cpus() - 1);
smp_wmb();
- atomic_set(&data.gate,1);
+ atomic_set(&data.gate, 1);
- /* do our MTRR business */
+ /* Do our MTRR business */
- /* HACK!
+ /*
+ * HACK!
* We use this same function to initialize the mtrrs on boot.
* The state of the boot cpu's mtrrs has been saved, and we want
- * to replicate across all the APs.
+ * to replicate across all the APs.
* If we're doing that @reg is set to something special...
*/
- if (reg != ~0U)
- mtrr_if->set(reg,base,size,type);
+ if (reg != ~0U)
+ mtrr_if->set(reg, base, size, type);
- /* wait for the others */
- while(atomic_read(&data.count))
+ /* Wait for the others */
+ while (atomic_read(&data.count))
cpu_relax();
atomic_set(&data.count, num_booting_cpus() - 1);
smp_wmb();
- atomic_set(&data.gate,0);
+ atomic_set(&data.gate, 0);
/*
* Wait here for everyone to have seen the gate change
* So we're the last ones to touch 'data'
*/
- while(atomic_read(&data.count))
+ while (atomic_read(&data.count))
cpu_relax();
local_irq_restore(flags);
}
/**
- * mtrr_add_page - Add a memory type region
- * @base: Physical base address of region in pages (in units of 4 kB!)
- * @size: Physical size of region in pages (4 kB)
- * @type: Type of MTRR desired
- * @increment: If this is true do usage counting on the region
+ * mtrr_add_page - Add a memory type region
+ * @base: Physical base address of region in pages (in units of 4 kB!)
+ * @size: Physical size of region in pages (4 kB)
+ * @type: Type of MTRR desired
+ * @increment: If this is true do usage counting on the region
*
- * Memory type region registers control the caching on newer Intel and
- * non Intel processors. This function allows drivers to request an
- * MTRR is added. The details and hardware specifics of each processor's
- * implementation are hidden from the caller, but nevertheless the
- * caller should expect to need to provide a power of two size on an
- * equivalent power of two boundary.
+ * Memory type region registers control the caching on newer Intel and
+ * non Intel processors. This function allows drivers to request an
+ * MTRR is added. The details and hardware specifics of each processor's
+ * implementation are hidden from the caller, but nevertheless the
+ * caller should expect to need to provide a power of two size on an
+ * equivalent power of two boundary.
*
- * If the region cannot be added either because all regions are in use
- * or the CPU cannot support it a negative value is returned. On success
- * the register number for this entry is returned, but should be treated
- * as a cookie only.
+ * If the region cannot be added either because all regions are in use
+ * or the CPU cannot support it a negative value is returned. On success
+ * the register number for this entry is returned, but should be treated
+ * as a cookie only.
*
- * On a multiprocessor machine the changes are made to all processors.
- * This is required on x86 by the Intel processors.
+ * On a multiprocessor machine the changes are made to all processors.
+ * This is required on x86 by the Intel processors.
*
- * The available types are
+ * The available types are
*
- * %MTRR_TYPE_UNCACHABLE - No caching
+ * %MTRR_TYPE_UNCACHABLE - No caching
*
- * %MTRR_TYPE_WRBACK - Write data back in bursts whenever
+ * %MTRR_TYPE_WRBACK - Write data back in bursts whenever
*
- * %MTRR_TYPE_WRCOMB - Write data back soon but allow bursts
+ * %MTRR_TYPE_WRCOMB - Write data back soon but allow bursts
*
- * %MTRR_TYPE_WRTHROUGH - Cache reads but not writes
+ * %MTRR_TYPE_WRTHROUGH - Cache reads but not writes
*
- * BUGS: Needs a quiet flag for the cases where drivers do not mind
- * failures and do not wish system log messages to be sent.
+ * BUGS: Needs a quiet flag for the cases where drivers do not mind
+ * failures and do not wish system log messages to be sent.
*/
-
-int mtrr_add_page(unsigned long base, unsigned long size,
+int mtrr_add_page(unsigned long base, unsigned long size,
unsigned int type, bool increment)
{
+ unsigned long lbase, lsize;
int i, replace, error;
mtrr_type ltype;
- unsigned long lbase, lsize;
if (!mtrr_if)
return -ENXIO;
-
- if ((error = mtrr_if->validate_add_page(base,size,type)))
+
+ error = mtrr_if->validate_add_page(base, size, type);
+ if (error)
return error;
if (type >= MTRR_NUM_TYPES) {
- printk(KERN_WARNING "mtrr: type: %u invalid\n", type);
+ pr_warning("mtrr: type: %u invalid\n", type);
return -EINVAL;
}
- /* If the type is WC, check that this processor supports it */
+ /* If the type is WC, check that this processor supports it */
if ((type == MTRR_TYPE_WRCOMB) && !have_wrcomb()) {
- printk(KERN_WARNING
- "mtrr: your processor doesn't support write-combining\n");
+ pr_warning("mtrr: your processor doesn't support write-combining\n");
return -ENOSYS;
}
if (!size) {
- printk(KERN_WARNING "mtrr: zero sized request\n");
+ pr_warning("mtrr: zero sized request\n");
return -EINVAL;
}
if (base & size_or_mask || size & size_or_mask) {
- printk(KERN_WARNING "mtrr: base or size exceeds the MTRR width\n");
+ pr_warning("mtrr: base or size exceeds the MTRR width\n");
return -EINVAL;
}
/* No CPU hotplug when we change MTRR entries */
get_online_cpus();
- /* Search for existing MTRR */
+
+ /* Search for existing MTRR */
mutex_lock(&mtrr_mutex);
for (i = 0; i < num_var_ranges; ++i) {
mtrr_if->get(i, &lbase, &lsize, <ype);
- if (!lsize || base > lbase + lsize - 1 || base + size - 1 < lbase)
+ if (!lsize || base > lbase + lsize - 1 ||
+ base + size - 1 < lbase)
continue;
- /* At this point we know there is some kind of overlap/enclosure */
+ /*
+ * At this point we know there is some kind of
+ * overlap/enclosure
+ */
if (base < lbase || base + size - 1 > lbase + lsize - 1) {
- if (base <= lbase && base + size - 1 >= lbase + lsize - 1) {
+ if (base <= lbase &&
+ base + size - 1 >= lbase + lsize - 1) {
/* New region encloses an existing region */
if (type == ltype) {
replace = replace == -1 ? i : -2;
continue;
- }
- else if (types_compatible(type, ltype))
+ } else if (types_compatible(type, ltype))
continue;
}
- printk(KERN_WARNING
- "mtrr: 0x%lx000,0x%lx000 overlaps existing"
- " 0x%lx000,0x%lx000\n", base, size, lbase,
- lsize);
+ pr_warning("mtrr: 0x%lx000,0x%lx000 overlaps existing"
+ " 0x%lx000,0x%lx000\n", base, size, lbase,
+ lsize);
goto out;
}
- /* New region is enclosed by an existing region */
+ /* New region is enclosed by an existing region */
if (ltype != type) {
if (types_compatible(type, ltype))
continue;
- printk (KERN_WARNING "mtrr: type mismatch for %lx000,%lx000 old: %s new: %s\n",
- base, size, mtrr_attrib_to_str(ltype),
- mtrr_attrib_to_str(type));
+ pr_warning("mtrr: type mismatch for %lx000,%lx000 old: %s new: %s\n",
+ base, size, mtrr_attrib_to_str(ltype),
+ mtrr_attrib_to_str(type));
goto out;
}
if (increment)
error = i;
goto out;
}
- /* Search for an empty MTRR */
+ /* Search for an empty MTRR */
i = mtrr_if->get_free_region(base, size, replace);
if (i >= 0) {
set_mtrr(i, base, size, type);
mtrr_usage_table[replace] = 0;
}
}
- } else
- printk(KERN_INFO "mtrr: no more MTRRs available\n");
+ } else {
+ pr_info("mtrr: no more MTRRs available\n");
+ }
error = i;
out:
mutex_unlock(&mtrr_mutex);
static int mtrr_check(unsigned long base, unsigned long size)
{
if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) {
- printk(KERN_WARNING
- "mtrr: size and base must be multiples of 4 kiB\n");
- printk(KERN_DEBUG
- "mtrr: size: 0x%lx base: 0x%lx\n", size, base);
+ pr_warning("mtrr: size and base must be multiples of 4 kiB\n");
+ pr_debug("mtrr: size: 0x%lx base: 0x%lx\n", size, base);
dump_stack();
return -1;
}
}
/**
- * mtrr_add - Add a memory type region
- * @base: Physical base address of region
- * @size: Physical size of region
- * @type: Type of MTRR desired
- * @increment: If this is true do usage counting on the region
+ * mtrr_add - Add a memory type region
+ * @base: Physical base address of region
+ * @size: Physical size of region
+ * @type: Type of MTRR desired
+ * @increment: If this is true do usage counting on the region
*
- * Memory type region registers control the caching on newer Intel and
- * non Intel processors. This function allows drivers to request an
- * MTRR is added. The details and hardware specifics of each processor's
- * implementation are hidden from the caller, but nevertheless the
- * caller should expect to need to provide a power of two size on an
- * equivalent power of two boundary.
+ * Memory type region registers control the caching on newer Intel and
+ * non Intel processors. This function allows drivers to request an
+ * MTRR is added. The details and hardware specifics of each processor's
+ * implementation are hidden from the caller, but nevertheless the
+ * caller should expect to need to provide a power of two size on an
+ * equivalent power of two boundary.
*
- * If the region cannot be added either because all regions are in use
- * or the CPU cannot support it a negative value is returned. On success
- * the register number for this entry is returned, but should be treated
- * as a cookie only.
+ * If the region cannot be added either because all regions are in use
+ * or the CPU cannot support it a negative value is returned. On success
+ * the register number for this entry is returned, but should be treated
+ * as a cookie only.
*
- * On a multiprocessor machine the changes are made to all processors.
- * This is required on x86 by the Intel processors.
+ * On a multiprocessor machine the changes are made to all processors.
+ * This is required on x86 by the Intel processors.
*
- * The available types are
+ * The available types are
*
- * %MTRR_TYPE_UNCACHABLE - No caching
+ * %MTRR_TYPE_UNCACHABLE - No caching
*
- * %MTRR_TYPE_WRBACK - Write data back in bursts whenever
+ * %MTRR_TYPE_WRBACK - Write data back in bursts whenever
*
- * %MTRR_TYPE_WRCOMB - Write data back soon but allow bursts
+ * %MTRR_TYPE_WRCOMB - Write data back soon but allow bursts
*
- * %MTRR_TYPE_WRTHROUGH - Cache reads but not writes
+ * %MTRR_TYPE_WRTHROUGH - Cache reads but not writes
*
- * BUGS: Needs a quiet flag for the cases where drivers do not mind
- * failures and do not wish system log messages to be sent.
+ * BUGS: Needs a quiet flag for the cases where drivers do not mind
+ * failures and do not wish system log messages to be sent.
*/
-
-int
-mtrr_add(unsigned long base, unsigned long size, unsigned int type,
- bool increment)
+int mtrr_add(unsigned long base, unsigned long size, unsigned int type,
+ bool increment)
{
if (mtrr_check(base, size))
return -EINVAL;
return mtrr_add_page(base >> PAGE_SHIFT, size >> PAGE_SHIFT, type,
increment);
}
+EXPORT_SYMBOL(mtrr_add);
/**
- * mtrr_del_page - delete a memory type region
- * @reg: Register returned by mtrr_add
- * @base: Physical base address
- * @size: Size of region
+ * mtrr_del_page - delete a memory type region
+ * @reg: Register returned by mtrr_add
+ * @base: Physical base address
+ * @size: Size of region
*
- * If register is supplied then base and size are ignored. This is
- * how drivers should call it.
+ * If register is supplied then base and size are ignored. This is
+ * how drivers should call it.
*
- * Releases an MTRR region. If the usage count drops to zero the
- * register is freed and the region returns to default state.
- * On success the register is returned, on failure a negative error
- * code.
+ * Releases an MTRR region. If the usage count drops to zero the
+ * register is freed and the region returns to default state.
+ * On success the register is returned, on failure a negative error
+ * code.
*/
-
int mtrr_del_page(int reg, unsigned long base, unsigned long size)
{
int i, max;
}
}
if (reg < 0) {
- printk(KERN_DEBUG "mtrr: no MTRR for %lx000,%lx000 found\n", base,
- size);
+ pr_debug("mtrr: no MTRR for %lx000,%lx000 found\n",
+ base, size);
goto out;
}
}
if (reg >= max) {
- printk(KERN_WARNING "mtrr: register: %d too big\n", reg);
+ pr_warning("mtrr: register: %d too big\n", reg);
goto out;
}
mtrr_if->get(reg, &lbase, &lsize, <ype);
if (lsize < 1) {
- printk(KERN_WARNING "mtrr: MTRR %d not used\n", reg);
+ pr_warning("mtrr: MTRR %d not used\n", reg);
goto out;
}
if (mtrr_usage_table[reg] < 1) {
- printk(KERN_WARNING "mtrr: reg: %d has count=0\n", reg);
+ pr_warning("mtrr: reg: %d has count=0\n", reg);
goto out;
}
if (--mtrr_usage_table[reg] < 1)
put_online_cpus();
return error;
}
+
/**
- * mtrr_del - delete a memory type region
- * @reg: Register returned by mtrr_add
- * @base: Physical base address
- * @size: Size of region
+ * mtrr_del - delete a memory type region
+ * @reg: Register returned by mtrr_add
+ * @base: Physical base address
+ * @size: Size of region
*
- * If register is supplied then base and size are ignored. This is
- * how drivers should call it.
+ * If register is supplied then base and size are ignored. This is
+ * how drivers should call it.
*
- * Releases an MTRR region. If the usage count drops to zero the
- * register is freed and the region returns to default state.
- * On success the register is returned, on failure a negative error
- * code.
+ * Releases an MTRR region. If the usage count drops to zero the
+ * register is freed and the region returns to default state.
+ * On success the register is returned, on failure a negative error
+ * code.
*/
-
-int
-mtrr_del(int reg, unsigned long base, unsigned long size)
+int mtrr_del(int reg, unsigned long base, unsigned long size)
{
if (mtrr_check(base, size))
return -EINVAL;
return mtrr_del_page(reg, base >> PAGE_SHIFT, size >> PAGE_SHIFT);
}
-
-EXPORT_SYMBOL(mtrr_add);
EXPORT_SYMBOL(mtrr_del);
-/* HACK ALERT!
+/*
+ * HACK ALERT!
* These should be called implicitly, but we can't yet until all the initcall
* stuff is done...
*/
static struct mtrr_value mtrr_value[MTRR_MAX_VAR_RANGES];
-static int mtrr_save(struct sys_device * sysdev, pm_message_t state)
+static int mtrr_save(struct sys_device *sysdev, pm_message_t state)
{
int i;
for (i = 0; i < num_var_ranges; i++) {
- mtrr_if->get(i,
- &mtrr_value[i].lbase,
- &mtrr_value[i].lsize,
- &mtrr_value[i].ltype);
+ mtrr_if->get(i, &mtrr_value[i].lbase,
+ &mtrr_value[i].lsize,
+ &mtrr_value[i].ltype);
}
return 0;
}
-static int mtrr_restore(struct sys_device * sysdev)
+static int mtrr_restore(struct sys_device *sysdev)
{
int i;
for (i = 0; i < num_var_ranges; i++) {
- if (mtrr_value[i].lsize)
- set_mtrr(i,
- mtrr_value[i].lbase,
- mtrr_value[i].lsize,
- mtrr_value[i].ltype);
+ if (mtrr_value[i].lsize) {
+ set_mtrr(i, mtrr_value[i].lbase,
+ mtrr_value[i].lsize,
+ mtrr_value[i].ltype);
+ }
}
return 0;
}
/**
* mtrr_bp_init - initialize mtrrs on the boot CPU
*
- * This needs to be called early; before any of the other CPUs are
+ * This needs to be called early; before any of the other CPUs are
* initialized (i.e. before smp_init()).
- *
+ *
*/
void __init mtrr_bp_init(void)
{
u32 phys_addr;
+
init_ifs();
phys_addr = 32;
if (cpu_has_mtrr) {
mtrr_if = &generic_mtrr_ops;
- size_or_mask = 0xff000000; /* 36 bits */
+ size_or_mask = 0xff000000; /* 36 bits */
size_and_mask = 0x00f00000;
phys_addr = 36;
- /* This is an AMD specific MSR, but we assume(hope?) that
- Intel will implement it to when they extend the address
- bus of the Xeon. */
+ /*
+ * This is an AMD specific MSR, but we assume(hope?) that
+ * Intel will implement it to when they extend the address
+ * bus of the Xeon.
+ */
if (cpuid_eax(0x80000000) >= 0x80000008) {
phys_addr = cpuid_eax(0x80000008) & 0xff;
/* CPUID workaround for Intel 0F33/0F34 CPU */
size_and_mask = ~size_or_mask & 0xfffff00000ULL;
} else if (boot_cpu_data.x86_vendor == X86_VENDOR_CENTAUR &&
boot_cpu_data.x86 == 6) {
- /* VIA C* family have Intel style MTRRs, but
- don't support PAE */
- size_or_mask = 0xfff00000; /* 32 bits */
+ /*
+ * VIA C* family have Intel style MTRRs,
+ * but don't support PAE
+ */
+ size_or_mask = 0xfff00000; /* 32 bits */
size_and_mask = 0;
phys_addr = 32;
}
changed_by_mtrr_cleanup = 1;
mtrr_if->set_all();
}
-
}
}
}
if (!mtrr_if || !use_intel())
return;
/*
- * Ideally we should hold mtrr_mutex here to avoid mtrr entries changed,
- * but this routine will be called in cpu boot time, holding the lock
- * breaks it. This routine is called in two cases: 1.very earily time
- * of software resume, when there absolutely isn't mtrr entry changes;
- * 2.cpu hotadd time. We let mtrr_add/del_page hold cpuhotplug lock to
- * prevent mtrr entry changes
+ * Ideally we should hold mtrr_mutex here to avoid mtrr entries
+ * changed, but this routine will be called in cpu boot time,
+ * holding the lock breaks it.
+ *
+ * This routine is called in two cases:
+ *
+ * 1. very earily time of software resume, when there absolutely
+ * isn't mtrr entry changes;
+ *
+ * 2. cpu hotadd time. We let mtrr_add/del_page hold cpuhotplug
+ * lock to prevent mtrr entry changes
*/
local_irq_save(flags);
{
if (!mtrr_if)
return 0;
+
if (use_intel()) {
if (!changed_by_mtrr_cleanup)
mtrr_state_warn();
- } else {
- /* The CPUs haven't MTRR and seem to not support SMP. They have
- * specific drivers, we use a tricky method to support
- * suspend/resume for them.
- * TBD: is there any system with such CPU which supports
- * suspend/resume? if no, we should remove the code.
- */
- sysdev_driver_register(&cpu_sysdev_class,
- &mtrr_sysdev_driver);
+ return 0;
}
+
+ /*
+ * The CPU has no MTRR and seems to not support SMP. They have
+ * specific drivers, we use a tricky method to support
+ * suspend/resume for them.
+ *
+ * TBD: is there any system with such CPU which supports
+ * suspend/resume? If no, we should remove the code.
+ */
+ sysdev_driver_register(&cpu_sysdev_class, &mtrr_sysdev_driver);
+
return 0;
}
subsys_initcall(mtrr_init_finialize);
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff