__IO_DEV_DESC(U8500_CLKRST3_BASE, SZ_4K),
__IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K),
__IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_GPIO5_BASE, SZ_4K),
__IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K),
};
};
static struct map_desc u8500v1_io_desc[] __initdata = {
- __IO_DEV_DESC(U8500_MTU0_BASE_V1, SZ_4K),
+ __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
};
void __init u8500_map_io(void)
if (cpu_is_u8500ed())
mtu_base = __io_address(U8500_MTU0_BASE_ED);
else
- mtu_base = __io_address(U8500_MTU0_BASE_V1);
+ mtu_base = __io_address(U8500_MTU0_BASE);
nmdk_timer_init();
}
--- /dev/null
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_DB5500_REGS_H
+#define __MACH_DB5500_REGS_H
+
+#define U5500_PER1_BASE 0xA0020000
+#define U5500_PER2_BASE 0xA0010000
+#define U5500_PER3_BASE 0x80140000
+#define U5500_PER4_BASE 0x80150000
+#define U5500_PER5_BASE 0x80100000
+#define U5500_PER6_BASE 0x80120000
+
+#define U5500_GIC_DIST_BASE 0xA0411000
+#define U5500_GIC_CPU_BASE 0xA0410100
+#define U5500_DMA_BASE 0x90030000
+#define U5500_MCDE_BASE 0xA0400000
+#define U5500_MODEM_BASE 0xB0000000
+#define U5500_L2CC_BASE 0xA0412000
+#define U5500_SCU_BASE 0xA0410000
+#define U5500_DSI1_BASE 0xA0401000
+#define U5500_DSI2_BASE 0xA0402000
+#define U5500_SIA_BASE 0xA0100000
+#define U5500_SVA_BASE 0x80200000
+#define U5500_HSEM_BASE 0xA0000000
+#define U5500_NAND0_BASE 0x60000000
+#define U5500_NAND1_BASE 0x70000000
+#define U5500_TWD_BASE 0xa0410600
+#define U5500_B2R2_BASE 0xa0200000
+
+#define U5500_FSMC_BASE (U5500_PER1_BASE + 0x0000)
+#define U5500_SDI0_BASE (U5500_PER1_BASE + 0x1000)
+#define U5500_SDI2_BASE (U5500_PER1_BASE + 0x2000)
+#define U5500_UART0_BASE (U5500_PER1_BASE + 0x3000)
+#define U5500_I2C1_BASE (U5500_PER1_BASE + 0x4000)
+#define U5500_MSP0_BASE (U5500_PER1_BASE + 0x5000)
+#define U5500_GPIO0_BASE (U5500_PER1_BASE + 0xE000)
+#define U5500_CLKRST1_BASE (U5500_PER1_BASE + 0xF000)
+
+#define U5500_USBOTG_BASE (U5500_PER2_BASE + 0x0000)
+#define U5500_GPIO1_BASE (U5500_PER2_BASE + 0xE000)
+#define U5500_CLKRST2_BASE (U5500_PER2_BASE + 0xF000)
+
+#define U5500_KEYPAD_BASE (U5500_PER3_BASE + 0x0000)
+#define U5500_PWM_BASE (U5500_PER3_BASE + 0x1000)
+#define U5500_GPIO3_BASE (U5500_PER3_BASE + 0xE000)
+#define U5500_CLKRST3_BASE (U5500_PER3_BASE + 0xF000)
+
+#define U5500_BACKUPRAM0_BASE (U5500_PER4_BASE + 0x0000)
+#define U5500_BACKUPRAM1_BASE (U5500_PER4_BASE + 0x1000)
+#define U5500_RTT0_BASE (U5500_PER4_BASE + 0x2000)
+#define U5500_RTT1_BASE (U5500_PER4_BASE + 0x3000)
+#define U5500_RTC_BASE (U5500_PER4_BASE + 0x4000)
+#define U5500_SCR_BASE (U5500_PER4_BASE + 0x5000)
+#define U5500_DMC_BASE (U5500_PER4_BASE + 0x6000)
+#define U5500_PRCMU_BASE (U5500_PER4_BASE + 0x7000)
+#define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000)
+#define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000)
+#define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000)
+
+#define U5500_SPI0_BASE (U5500_PER5_BASE + 0x0000)
+#define U5500_SPI1_BASE (U5500_PER5_BASE + 0x1000)
+#define U5500_SPI2_BASE (U5500_PER5_BASE + 0x2000)
+#define U5500_SPI3_BASE (U5500_PER5_BASE + 0x3000)
+#define U5500_UART1_BASE (U5500_PER5_BASE + 0x4000)
+#define U5500_UART2_BASE (U5500_PER5_BASE + 0x5000)
+#define U5500_UART3_BASE (U5500_PER5_BASE + 0x6000)
+#define U5500_SDI1_BASE (U5500_PER5_BASE + 0x7000)
+#define U5500_SDI3_BASE (U5500_PER5_BASE + 0x8000)
+#define U5500_SDI4_BASE (U5500_PER5_BASE + 0x9000)
+#define U5500_I2C2_BASE (U5500_PER5_BASE + 0xA000)
+#define U5500_I2C3_BASE (U5500_PER5_BASE + 0xB000)
+#define U5500_MSP2_BASE (U5500_PER5_BASE + 0xC000)
+#define U5500_IRDA_BASE (U5500_PER5_BASE + 0xD000)
+#define U5500_IRRC_BASE (U5500_PER5_BASE + 0x10000)
+#define U5500_GPIO4_BASE (U5500_PER5_BASE + 0x1E000)
+#define U5500_CLKRST5_BASE (U5500_PER5_BASE + 0x1F000)
+
+#define U5500_RNG_BASE (U5500_PER6_BASE + 0x0000)
+#define U5500_HASH0_BASE (U5500_PER6_BASE + 0x1000)
+#define U5500_HASH1_BASE (U5500_PER6_BASE + 0x2000)
+#define U5500_PKA_BASE (U5500_PER6_BASE + 0x4000)
+#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5000)
+#define U5500_MTU0_BASE (U5500_PER6_BASE + 0x6000)
+#define U5500_MTU1_BASE (U5500_PER6_BASE + 0x7000)
+#define U5500_CR_BASE (U5500_PER6_BASE + 0x8000)
+#define U5500_CRYP0_BASE (U5500_PER6_BASE + 0xA000)
+#define U5500_CRYP1_BASE (U5500_PER6_BASE + 0xB000)
+#define U5500_CLKRST6_BASE (U5500_PER6_BASE + 0xF000)
+
+#define U5500_GPIOBANK0_BASE U5500_GPIO0_BASE
+#define U5500_GPIOBANK1_BASE (U5500_GPIO0_BASE + 0x80)
+#define U5500_GPIOBANK2_BASE U5500_GPIO1_BASE
+#define U5500_GPIOBANK3_BASE U5500_GPIO2_BASE
+#define U5500_GPIOBANK4_BASE U5500_GPIO3_BASE
+#define U5500_GPIOBANK5_BASE U5500_GPIO4_BASE
+#define U5500_GPIOBANK6_BASE (U5500_GPIO4_BASE + 0x80)
+#define U5500_GPIOBANK7_BASE (U5500_GPIO4_BASE + 0x100)
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_DB8500_REGS_H
+#define __MACH_DB8500_REGS_H
+
+#define U8500_PER3_BASE 0x80000000
+#define U8500_STM_BASE 0x80100000
+#define U8500_STM_REG_BASE (U8500_STM_BASE + 0xF000)
+#define U8500_PER2_BASE 0x80110000
+#define U8500_PER1_BASE 0x80120000
+#define U8500_B2R2_BASE 0x80130000
+#define U8500_HSEM_BASE 0x80140000
+#define U8500_PER4_BASE 0x80150000
+#define U8500_ICN_BASE 0x81000000
+
+#define U8500_BOOT_ROM_BASE 0x90000000
+/* ASIC ID is at 0xff4 offset within this region */
+#define U8500_ASIC_ID_BASE 0x9001F000
+
+#define U8500_PER6_BASE 0xa03c0000
+#define U8500_PER5_BASE 0xa03e0000
+#define U8500_PER7_BASE_ED 0xa03d0000
+
+#define U8500_SVA_BASE 0xa0100000
+#define U8500_SIA_BASE 0xa0200000
+
+#define U8500_SGA_BASE 0xa0300000
+#define U8500_MCDE_BASE 0xa0350000
+#define U8500_DMA_BASE_ED 0xa0362000
+#define U8500_DMA_BASE 0x801C0000 /* v1 */
+
+#define U8500_SBAG_BASE 0xa0390000
+
+#define U8500_SCU_BASE 0xa0410000
+#define U8500_GIC_CPU_BASE 0xa0410100
+#define U8500_TWD_BASE 0xa0410600
+#define U8500_GIC_DIST_BASE 0xa0411000
+#define U8500_L2CC_BASE 0xa0412000
+
+#define U8500_MODEM_I2C 0xb7e02000
+
+#define U8500_GPIO0_BASE (U8500_PER1_BASE + 0xE000)
+#define U8500_GPIO1_BASE (U8500_PER3_BASE + 0xE000)
+#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xE000)
+#define U8500_GPIO3_BASE (U8500_PER5_BASE + 0x1E000)
+
+/* per7 base addressess */
+#define U8500_CR_BASE_ED (U8500_PER7_BASE_ED + 0x8000)
+#define U8500_MTU0_BASE_ED (U8500_PER7_BASE_ED + 0xa000)
+#define U8500_MTU1_BASE_ED (U8500_PER7_BASE_ED + 0xb000)
+#define U8500_TZPC0_BASE_ED (U8500_PER7_BASE_ED + 0xc000)
+#define U8500_CLKRST7_BASE_ED (U8500_PER7_BASE_ED + 0xf000)
+
+#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000)
+#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000)
+
+/* per6 base addressess */
+#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000)
+#define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000)
+#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000)
+#define U8500_MTU0_BASE (U8500_PER6_BASE + 0x6000) /* v1 */
+#define U8500_MTU1_BASE (U8500_PER6_BASE + 0x7000) /* v1 */
+#define U8500_CR_BASE (U8500_PER6_BASE + 0x8000) /* v1 */
+#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000)
+#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000)
+#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000)
+
+/* per5 base addressess */
+#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000)
+#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000)
+
+/* per4 base addressess */
+#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x00000)
+#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x01000)
+#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x02000)
+#define U8500_RTT1_BASE (U8500_PER4_BASE + 0x03000)
+#define U8500_RTC_BASE (U8500_PER4_BASE + 0x04000)
+#define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000)
+#define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000)
+#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000)
+#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x0f000)
+
+/* per3 base addresses */
+#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000)
+#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000)
+#define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000)
+#define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000)
+#define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000)
+#define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000)
+#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000)
+#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000)
+#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000)
+
+/* per2 base addressess */
+#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000)
+#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000)
+#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000)
+#define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000)
+#define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000)
+#define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000)
+#define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000)
+#define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000)
+#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000)
+#define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000)
+#define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000)
+#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000)
+
+/* per1 base addresses */
+#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000)
+#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000)
+#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000)
+#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000)
+#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000)
+#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000)
+#define U8500_I2C4_BASE (U8500_PER1_BASE + 0xa000)
+#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xb000)
+#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000)
+
+#define U8500_SHRM_GOP_INTERRUPT_BASE 0xB7C00040
+
+#define U8500_GPIOBANK0_BASE U8500_GPIO0_BASE
+#define U8500_GPIOBANK1_BASE (U8500_GPIO0_BASE + 0x80)
+#define U8500_GPIOBANK2_BASE U8500_GPIO1_BASE
+#define U8500_GPIOBANK3_BASE (U8500_GPIO1_BASE + 0x80)
+#define U8500_GPIOBANK4_BASE (U8500_GPIO1_BASE + 0x100)
+#define U8500_GPIOBANK5_BASE (U8500_GPIO1_BASE + 0x180)
+#define U8500_GPIOBANK6_BASE U8500_GPIO2_BASE
+#define U8500_GPIOBANK7_BASE (U8500_GPIO2_BASE + 0x80)
+#define U8500_GPIOBANK8_BASE U8500_GPIO3_BASE
+
+#endif
/* used by some plat-nomadik code */
#define io_p2v(n) __io_address(n)
-/*
- * Base address definitions for U8500 Onchip IPs. All the
- * peripherals are contained in a single 1 Mbyte region, with
- * AHB peripherals at the bottom and APB peripherals at the
- * top of the region. PER stands for PERIPHERAL region which
- * itself divided into sub regions.
- */
-#define U8500_PER3_BASE 0x80000000
-#define U8500_PER2_BASE 0x80110000
-#define U8500_PER1_BASE 0x80120000
-#define U8500_PER4_BASE 0x80150000
-
-#define U8500_PER6_BASE 0xa03c0000
-#define U8500_PER5_BASE 0xa03e0000
-#define U8500_PER7_BASE 0xa03d0000
-
-#define U8500_SVA_BASE 0xa0100000
-#define U8500_SIA_BASE 0xa0200000
-
-#define U8500_SGA_BASE 0xa0300000
-#define U8500_MCDE_BASE 0xa0350000
-#define U8500_DMA_BASE 0xa0362000
-
-#define U8500_SCU_BASE 0xa0410000
-#define U8500_GIC_CPU_BASE 0xa0410100
-#define U8500_TWD_BASE 0xa0410600
-#define U8500_GIC_DIST_BASE 0xa0411000
-#define U8500_L2CC_BASE 0xa0412000
-
-#define U8500_TWD_SIZE 0x100
-
-/* per7 base addressess */
-#define U8500_CR_BASE_ED (U8500_PER7_BASE + 0x8000)
-#define U8500_MTU0_BASE_ED (U8500_PER7_BASE + 0xa000)
-#define U8500_MTU1_BASE_ED (U8500_PER7_BASE + 0xb000)
-#define U8500_TZPC0_BASE_ED (U8500_PER7_BASE + 0xc000)
-#define U8500_CLKRST7_BASE_ED (U8500_PER7_BASE + 0xf000)
-
-/* per6 base addressess */
-#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000)
-#define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000)
-#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000)
-#define U8500_MTU0_BASE_V1 (U8500_PER6_BASE + 0x6000)
-#define U8500_MTU1_BASE_V1 (U8500_PER6_BASE + 0x7000)
-#define U8500_CR_BASE_V1 (U8500_PER6_BASE + 0x8000)
-#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000)
-#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000)
-#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000)
-
-/* per5 base addressess */
-#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000)
-#define U8500_GPIO5_BASE (U8500_PER5_BASE + 0x1e000)
-#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000)
-
-/* per4 base addressess */
-#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x0000)
-#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x1000)
-#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x2000)
-#define U8500_RTT1_BASE (U8500_PER4_BASE + 0x3000)
-#define U8500_RTC_BASE (U8500_PER4_BASE + 0x4000)
-#define U8500_SCR_BASE (U8500_PER4_BASE + 0x5000)
-#define U8500_DMC_BASE (U8500_PER4_BASE + 0x6000)
-#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x7000)
-
-/* per3 base addressess */
-#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000)
-#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000)
-#define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000)
-#define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000)
-#define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000)
-#define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000)
-#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000)
-#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000)
-#define U8500_GPIO3_BASE (U8500_PER3_BASE + 0xe000)
-#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000)
-
-/* per2 base addressess */
-#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000)
-#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000)
-#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000)
-#define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000)
-#define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000)
-#define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000)
-#define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000)
-#define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000)
-#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000)
-#define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000)
-#define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000)
-#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xe000)
-#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000)
-
-/* per1 base addresses */
-#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000)
-#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000)
-#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000)
-#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000)
-#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000)
-#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000)
-#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000)
-#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000)
-#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xa000)
-#define U8500_GPIO1_BASE (U8500_PER1_BASE + 0xe000)
-#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000)
-
-#define U8500_GPIOBANK0_BASE U8500_GPIO1_BASE
-#define U8500_GPIOBANK1_BASE (U8500_GPIO1_BASE + 0x80)
-#define U8500_GPIOBANK2_BASE U8500_GPIO3_BASE
-#define U8500_GPIOBANK3_BASE (U8500_GPIO3_BASE + 0x80)
-#define U8500_GPIOBANK4_BASE (U8500_GPIO3_BASE + 0x100)
-#define U8500_GPIOBANK5_BASE (U8500_GPIO3_BASE + 0x180)
-#define U8500_GPIOBANK6_BASE U8500_GPIO2_BASE
-#define U8500_GPIOBANK7_BASE (U8500_GPIO2_BASE + 0x80)
-#define U8500_GPIOBANK8_BASE U8500_GPIO5_BASE
+#include <mach/db8500-regs.h>
+#include <mach/db5500-regs.h>
+
+#ifdef CONFIG_UX500_SOC_DB8500
+#define UX500(periph) U8500_##periph##_BASE
+#elif defined(CONFIG_UX500_SOC_DB5500)
+#define UX500(periph) U5500_##periph##_BASE
+#endif
+
+#define UX500_BACKUPRAM0_BASE UX500(BACKUPRAM0)
+#define UX500_BACKUPRAM1_BASE UX500(BACKUPRAM1)
+#define UX500_B2R2_BASE UX500(B2R2)
+
+#define UX500_CLKRST1_BASE UX500(CLKRST1)
+#define UX500_CLKRST2_BASE UX500(CLKRST2)
+#define UX500_CLKRST3_BASE UX500(CLKRST3)
+#define UX500_CLKRST5_BASE UX500(CLKRST5)
+#define UX500_CLKRST6_BASE UX500(CLKRST6)
+
+#define UX500_DMA_BASE UX500(DMA)
+#define UX500_FSMC_BASE UX500(FSMC)
+
+#define UX500_GIC_CPU_BASE UX500(GIC_CPU)
+#define UX500_GIC_DIST_BASE UX500(GIC_DIST)
+
+#define UX500_I2C1_BASE UX500(I2C1)
+#define UX500_I2C2_BASE UX500(I2C2)
+#define UX500_I2C3_BASE UX500(I2C3)
+
+#define UX500_L2CC_BASE UX500(L2CC)
+#define UX500_MCDE_BASE UX500(MCDE)
+#define UX500_MTU0_BASE UX500(MTU0)
+#define UX500_MTU1_BASE UX500(MTU1)
+#define UX500_PRCMU_BASE UX500(PRCMU)
+
+#define UX500_RNG_BASE UX500(RNG)
+#define UX500_RTC_BASE UX500(RTC)
+
+#define UX500_SCU_BASE UX500(SCU)
+
+#define UX500_SDI0_BASE UX500(SDI0)
+#define UX500_SDI1_BASE UX500(SDI1)
+#define UX500_SDI2_BASE UX500(SDI2)
+#define UX500_SDI3_BASE UX500(SDI3)
+#define UX500_SDI4_BASE UX500(SDI4)
+
+#define UX500_SPI0_BASE UX500(SPI0)
+#define UX500_SPI1_BASE UX500(SPI1)
+#define UX500_SPI2_BASE UX500(SPI2)
+#define UX500_SPI3_BASE UX500(SPI3)
+
+#define UX500_SIA_BASE UX500(SIA)
+#define UX500_SVA_BASE UX500(SVA)
+
+#define UX500_TWD_BASE UX500(TWD)
+
+#define UX500_UART0_BASE UX500(UART0)
+#define UX500_UART1_BASE UX500(UART1)
+#define UX500_UART2_BASE UX500(UART2)
+
+#define UX500_USBOTG_BASE UX500(USBOTG)
/* ST-Ericsson modified pl022 id */
#define SSP_PER_ID 0x01080022
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff