#endif
/**
- * ata_port_start - Set port up for dma.
- * @ap: Port to initialize
- *
- * Called just after data structures for each port are
- * initialized. Allocates space for PRD table.
- *
- * May be used as the port_start() entry in ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-int ata_port_start(struct ata_port *ap)
-{
- struct device *dev = ap->dev;
-
- ap->prd = dmam_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma,
- GFP_KERNEL);
- if (!ap->prd)
- return -ENOMEM;
-
- return 0;
-}
-
-/**
* ata_dev_init - Initialize an ata_device structure
* @dev: Device structure to initialize
*
EXPORT_SYMBOL_GPL(ata_xfer_mode2shift);
EXPORT_SYMBOL_GPL(ata_mode_string);
EXPORT_SYMBOL_GPL(ata_id_xfermask);
-EXPORT_SYMBOL_GPL(ata_port_start);
EXPORT_SYMBOL_GPL(ata_do_set_mode);
EXPORT_SYMBOL_GPL(ata_std_qc_defer);
EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
.sff_irq_clear = ata_sff_irq_clear,
.lost_interrupt = ata_sff_lost_interrupt,
-
- .port_start = ata_sff_port_start,
};
EXPORT_SYMBOL_GPL(ata_sff_port_ops);
EXPORT_SYMBOL_GPL(ata_sff_post_internal_cmd);
/**
- * ata_sff_port_start - Set port up for dma.
- * @ap: Port to initialize
- *
- * Called just after data structures for each port are
- * initialized. Allocates space for PRD table if the device
- * is DMA capable SFF.
- *
- * May be used as the port_start() entry in ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-int ata_sff_port_start(struct ata_port *ap)
-{
- if (ap->ioaddr.bmdma_addr)
- return ata_port_start(ap);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ata_sff_port_start);
-
-/**
- * ata_sff_port_start32 - Set port up for dma.
- * @ap: Port to initialize
- *
- * Called just after data structures for each port are
- * initialized. Allocates space for PRD table if the device
- * is DMA capable SFF.
- *
- * May be used as the port_start() entry in ata_port_operations for
- * devices that are capable of 32bit PIO.
- *
- * LOCKING:
- * Inherited from caller.
- */
-int ata_sff_port_start32(struct ata_port *ap)
-{
- ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
- if (ap->ioaddr.bmdma_addr)
- return ata_port_start(ap);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ata_sff_port_start32);
-
-/**
* ata_sff_std_ports - initialize ioaddr with standard port offsets.
* @ioaddr: IO address structure to be initialized
*
goto err_out;
/* init DMA related stuff */
- rc = ata_pci_bmdma_init(host);
- if (rc)
- goto err_bmdma;
+ ata_pci_bmdma_init(host);
devres_remove_group(&pdev->dev, NULL);
*r_host = host;
return 0;
-err_bmdma:
- /* This is necessary because PCI and iomap resources are
- * merged and releasing the top group won't release the
- * acquired resources if some of those have been acquired
- * before entering this function.
- */
- pcim_iounmap_regions(pdev, 0xf);
err_out:
devres_release_group(&pdev->dev, NULL);
return rc;
const struct ata_port_operations ata_bmdma_port_ops = {
.inherits = &ata_sff_port_ops,
- .mode_filter = ata_bmdma_mode_filter,
-
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
+
+ .port_start = ata_bmdma_port_start,
};
EXPORT_SYMBOL_GPL(ata_bmdma_port_ops);
.inherits = &ata_bmdma_port_ops,
.sff_data_xfer = ata_sff_data_xfer32,
- .port_start = ata_sff_port_start32,
+ .port_start = ata_bmdma_port_start32,
};
EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops);
-unsigned long ata_bmdma_mode_filter(struct ata_device *adev,
- unsigned long xfer_mask)
-{
- /* Filter out DMA modes if the device has been configured by
- the BIOS as PIO only */
-
- if (adev->link->ap->ioaddr.bmdma_addr == NULL)
- xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
- return xfer_mask;
-}
-EXPORT_SYMBOL_GPL(ata_bmdma_mode_filter);
-
/**
* ata_bmdma_setup - Set up PCI IDE BMDMA transaction
* @qc: Info associated with this ATA transaction.
}
EXPORT_SYMBOL_GPL(ata_bmdma_status);
+
+/**
+ * ata_bmdma_port_start - Set port up for bmdma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized. Allocates space for PRD table.
+ *
+ * May be used as the port_start() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+int ata_bmdma_port_start(struct ata_port *ap)
+{
+ if (ap->mwdma_mask || ap->udma_mask) {
+ ap->prd = dmam_alloc_coherent(ap->host->dev, ATA_PRD_TBL_SZ,
+ &ap->prd_dma, GFP_KERNEL);
+ if (!ap->prd)
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_port_start);
+
+/**
+ * ata_bmdma_port_start32 - Set port up for dma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized. Enables 32bit PIO and allocates space for PRD
+ * table.
+ *
+ * May be used as the port_start() entry in ata_port_operations for
+ * devices that are capable of 32bit PIO.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+int ata_bmdma_port_start32(struct ata_port *ap)
+{
+ ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
+ return ata_bmdma_port_start(ap);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_port_start32);
+
#ifdef CONFIG_PCI
/**
}
EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
+static void ata_bmdma_nodma(struct ata_host *host, const char *reason)
+{
+ int i;
+
+ dev_printk(KERN_ERR, host->dev, "BMDMA: %s, falling back to PIO\n",
+ reason);
+
+ for (i = 0; i < 2; i++) {
+ host->ports[i]->mwdma_mask = 0;
+ host->ports[i]->udma_mask = 0;
+ }
+}
+
/**
* ata_pci_bmdma_init - acquire PCI BMDMA resources and init ATA host
* @host: target ATA host
*
* LOCKING:
* Inherited from calling layer (may sleep).
- *
- * RETURNS:
- * 0 on success, -errno otherwise.
*/
-int ata_pci_bmdma_init(struct ata_host *host)
+void ata_pci_bmdma_init(struct ata_host *host)
{
struct device *gdev = host->dev;
struct pci_dev *pdev = to_pci_dev(gdev);
int i, rc;
/* No BAR4 allocation: No DMA */
- if (pci_resource_start(pdev, 4) == 0)
- return 0;
+ if (pci_resource_start(pdev, 4) == 0) {
+ ata_bmdma_nodma(host, "BAR4 is zero");
+ return;
+ }
- /* TODO: If we get no DMA mask we should fall back to PIO */
+ /*
+ * Some controllers require BMDMA region to be initialized
+ * even if DMA is not in use to clear IRQ status via
+ * ->sff_irq_clear method. Try to initialize bmdma_addr
+ * regardless of dma masks.
+ */
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
- return rc;
- rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
- return rc;
+ ata_bmdma_nodma(host, "failed to set dma mask");
+ if (!rc) {
+ rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ ata_bmdma_nodma(host,
+ "failed to set consistent dma mask");
+ }
/* request and iomap DMA region */
rc = pcim_iomap_regions(pdev, 1 << 4, dev_driver_string(gdev));
if (rc) {
- dev_printk(KERN_ERR, gdev, "failed to request/iomap BAR4\n");
- return -ENOMEM;
+ ata_bmdma_nodma(host, "failed to request/iomap BAR4");
+ return;
}
host->iomap = pcim_iomap_table(pdev);
ata_port_desc(ap, "bmdma 0x%llx",
(unsigned long long)pci_resource_start(pdev, 4) + 8 * i);
}
-
- return 0;
}
EXPORT_SYMBOL_GPL(ata_pci_bmdma_init);
static unsigned long pacpi_mode_filter(struct ata_device *adev, unsigned long mask)
{
struct pata_acpi *acpi = adev->link->ap->private_data;
- return ata_bmdma_mode_filter(adev, mask & acpi->mask[adev->devno]);
+ return mask & acpi->mask[adev->devno];
}
/**
return -ENOMEM;
acpi->mask[0] = pacpi_discover_modes(ap, &ap->link.device[0]);
acpi->mask[1] = pacpi_discover_modes(ap, &ap->link.device[1]);
- ret = ata_sff_port_start(ap);
+ ret = ata_bmdma_port_start(ap);
if (ret < 0)
return ret;
ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
if (strstr(model_num, "WDC"))
return mask &= ~ATA_MASK_UDMA;
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
/**
.sff_data_xfer = pata_at91_data_xfer_noirq,
.set_piomode = pata_at91_set_piomode,
.cable_detect = ata_cable_40wire,
- .port_start = ATA_OP_NULL,
};
static int __devinit pata_at91_probe(struct platform_device *pdev)
.port_start = bfin_port_start,
.port_stop = bfin_port_stop,
-
- .mode_filter = ATA_OP_NULL, /* will be removed soon */
};
static struct ata_port_info bfin_port_info[] = {
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct cmd640_reg *timing;
- int ret = ata_sff_port_start(ap);
- if (ret < 0)
- return ret;
-
timing = devm_kzalloc(&pdev->dev, sizeof(struct cmd640_reg), GFP_KERNEL);
if (timing == NULL)
return -ENOMEM;
timing->last = -1; /* Force a load */
ap->private_data = timing;
- return ret;
+ return 0;
}
static struct scsi_host_template cmd640_sht = {
} else if (adev->class == ATA_DEV_ATAPI)
mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
static int hpt36x_cable_detect(struct ata_port *ap)
if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
/**
if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
/**
.postreset = pata_icside_postreset,
.post_internal_cmd = pata_icside_bmdma_stop,
- .mode_filter = ATA_OP_NULL, /* will be removed soon */
+ .port_start = ATA_OP_NULL, /* don't need PRD table */
};
static void __devinit
struct it821x_dev *itdev;
u8 conf;
- int ret = ata_sff_port_start(ap);
+ int ret = ata_bmdma_port_start(ap);
if (ret < 0)
return ret;
if (priv->dma_table_cpu == NULL) {
dev_err(priv->dev, "Unable to allocate DMA command list\n");
ap->ioaddr.bmdma_addr = NULL;
+ ap->mwdma_mask = 0;
+ ap->udma_mask = 0;
}
return 0;
}
struct ata_device *pair = ata_dev_pair(adev);
if (adev->class != ATA_DEV_ATA || adev->devno == 0 || pair == NULL)
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
/* Check for slave of a Maxtor at UDMA6 */
ata_id_c_string(pair->id, model_num, ATA_ID_PROD,
if (strstr(model_num, "Maxtor") == NULL && pair->dma_mode == XFER_UDMA_6)
mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
/**
u8 burst = ioread8(bmdma + 0x1f);
iowrite8(burst | 0x01, bmdma + 0x1f);
}
- return ata_sff_port_start(ap);
+ return ata_bmdma_port_start(ap);
}
/**
.sff_data_xfer = ata_sff_data_xfer_noirq,
.cable_detect = ata_cable_unknown,
.set_mode = pata_platform_set_mode,
- .port_start = ATA_OP_NULL,
};
static void pata_platform_setup_port(struct ata_ioports *ioaddr,
printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME);
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
/**
* scc_port_start - Set port up for dma.
* @ap: Port to initialize
*
- * Allocate space for PRD table using ata_port_start().
+ * Allocate space for PRD table using ata_bmdma_port_start().
* Set PRD table address for PTERADD. (PRD Transfer End Read)
*/
void __iomem *mmio = ap->ioaddr.bmdma_addr;
int rc;
- rc = ata_port_start(ap);
+ rc = ata_bmdma_port_start(ap);
if (rc)
return rc;
{
if (adev->class == ATA_DEV_ATA)
mask &= ~ATA_MASK_UDMA;
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
/* Disk, UDMA */
if (adev->class != ATA_DEV_ATA)
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
/* Actually do need to check */
ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
if (!strcmp(p, model_num))
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
/**
mask &= ~ ATA_MASK_UDMA;
}
}
- return ata_bmdma_mode_filter(dev, mask);
+ return mask;
}
/**
struct via_port *vp;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- int ret = ata_sff_port_start(ap);
+ int ret = ata_bmdma_port_start(ap);
if (ret < 0)
return ret;
{
struct device *dev = ap->host->dev;
struct adma_port_priv *pp;
- int rc;
- rc = ata_port_start(ap);
- if (rc)
- return rc;
adma_enter_reg_mode(ap);
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
{
struct device *dev = ap->host->dev;
struct inic_port_priv *pp;
- int rc;
/* alloc and initialize private data */
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
ap->private_data = pp;
/* Alloc resources */
- rc = ata_port_start(ap);
- if (rc)
- return rc;
-
pp->pkt = dmam_alloc_coherent(dev, sizeof(struct inic_pkt),
&pp->pkt_dma, GFP_KERNEL);
if (!pp->pkt)
.port_start = mv_port_start,
.port_stop = mv_port_stop,
-
- .mode_filter = ATA_OP_NULL, /* will be removed soon */
};
static struct ata_port_operations mv_iie_ops = {
if (rc)
return rc;
- rc = ata_port_start(ap);
+ /* we might fallback to bmdma, allocate bmdma resources */
+ rc = ata_bmdma_port_start(ap);
if (rc)
return rc;
struct nv_swncq_port_priv *pp;
int rc;
- rc = ata_port_start(ap);
+ /* we might fallback to bmdma, allocate bmdma resources */
+ rc = ata_bmdma_port_start(ap);
if (rc)
return rc;
struct pdc_port_priv *pp;
int rc;
- rc = ata_port_start(ap);
+ /* we use the same prd table as bmdma, allocate it */
+ rc = ata_bmdma_port_start(ap);
if (rc)
return rc;
void __iomem *mmio_base = qs_mmio_base(ap->host);
void __iomem *chan = mmio_base + (ap->port_no * 0x4000);
u64 addr;
- int rc;
- rc = ata_port_start(ap);
- if (rc)
- return rc;
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
return -ENOMEM;
{
struct device *dev = ap->host->dev;
struct pdc_port_priv *pp;
- int rc;
-
- rc = ata_port_start(ap);
- if (rc)
- return rc;
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
if (rc)
return rc;
- rc = ata_pci_bmdma_init(host);
- if (rc)
- return rc;
+ ata_pci_bmdma_init(host);
iomap = host->iomap;
extern int ata_xfer_mode2shift(unsigned long xfer_mode);
extern const char *ata_mode_string(unsigned long xfer_mask);
extern unsigned long ata_id_xfermask(const u16 *id);
-extern int ata_port_start(struct ata_port *ap);
extern int ata_std_qc_defer(struct ata_queued_cmd *qc);
extern void ata_noop_qc_prep(struct ata_queued_cmd *qc);
extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
extern void ata_sff_drain_fifo(struct ata_queued_cmd *qc);
extern void ata_sff_error_handler(struct ata_port *ap);
extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc);
-extern int ata_sff_port_start(struct ata_port *ap);
-extern int ata_sff_port_start32(struct ata_port *ap);
extern void ata_sff_std_ports(struct ata_ioports *ioaddr);
#ifdef CONFIG_PCI
extern int ata_pci_sff_init_host(struct ata_host *host);
struct scsi_host_template *sht, void *host_priv, int hflags);
#endif /* CONFIG_PCI */
-extern unsigned long ata_bmdma_mode_filter(struct ata_device *dev,
- unsigned long xfer_mask);
extern void ata_bmdma_setup(struct ata_queued_cmd *qc);
extern void ata_bmdma_start(struct ata_queued_cmd *qc);
extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
extern u8 ata_bmdma_status(struct ata_port *ap);
+extern int ata_bmdma_port_start(struct ata_port *ap);
+extern int ata_bmdma_port_start32(struct ata_port *ap);
#ifdef CONFIG_PCI
extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
-extern int ata_pci_bmdma_init(struct ata_host *host);
+extern void ata_pci_bmdma_init(struct ata_host *host);
#endif /* CONFIG_PCI */
/**
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff