hwmon: (w83781d) Clean up detect function

As kind is now hard-coded to -1, there is room for code clean-ups.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index d27ed1b..7ab7967 100644 (file)
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1054,11 +1054,11 @@ static int
 w83781d_detect(struct i2c_client *client, int kind,
               struct i2c_board_info *info)
 {
-       int val1 = 0, val2;
+       int val1, val2;
        struct w83781d_data *isa = w83781d_data_if_isa();
        struct i2c_adapter *adapter = client->adapter;
        int address = client->addr;
-       const char *client_name = "";
+       const char *client_name;
        enum vendor { winbond, asus } vendid;
 
        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
@@ -1070,98 +1070,73 @@ w83781d_detect(struct i2c_client *client, int kind,
        if (isa)
                mutex_lock(&isa->update_lock);
 
-       /* The w8378?d may be stuck in some other bank than bank 0. This may
-          make reading other information impossible. Specify a force=... or
-          force_*=... parameter, and the Winbond will be reset to the right
-          bank. */
-       if (kind < 0) {
-               if (i2c_smbus_read_byte_data
-                   (client, W83781D_REG_CONFIG) & 0x80) {
-                       dev_dbg(&adapter->dev, "Detection of w83781d chip "
-                               "failed at step 3\n");
-                       goto err_nodev;
-               }
-               val1 = i2c_smbus_read_byte_data(client, W83781D_REG_BANK);
-               val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
-               /* Check for Winbond or Asus ID if in bank 0 */
-               if ((!(val1 & 0x07)) &&
-                   (((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3))
-                    || ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) {
-                       dev_dbg(&adapter->dev, "Detection of w83781d chip "
-                               "failed at step 4\n");
+       if (i2c_smbus_read_byte_data(client, W83781D_REG_CONFIG) & 0x80) {
+               dev_dbg(&adapter->dev,
+                       "Detection of w83781d chip failed at step 3\n");
+               goto err_nodev;
+       }
+
+       val1 = i2c_smbus_read_byte_data(client, W83781D_REG_BANK);
+       val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
+       /* Check for Winbond or Asus ID if in bank 0 */
+       if (!(val1 & 0x07) &&
+           ((!(val1 & 0x80) && val2 != 0xa3 && val2 != 0xc3) ||
+            ( (val1 & 0x80) && val2 != 0x5c && val2 != 0x12))) {
+               dev_dbg(&adapter->dev,
+                       "Detection of w83781d chip failed at step 4\n");
+               goto err_nodev;
+       }
+       /* If Winbond SMBus, check address at 0x48.
+          Asus doesn't support, except for as99127f rev.2 */
+       if ((!(val1 & 0x80) && val2 == 0xa3) ||
+           ( (val1 & 0x80) && val2 == 0x5c)) {
+               if (i2c_smbus_read_byte_data(client, W83781D_REG_I2C_ADDR)
+                   != address) {
+                       dev_dbg(&adapter->dev,
+                               "Detection of w83781d chip failed at step 5\n");
                        goto err_nodev;
                }
-               /* If Winbond SMBus, check address at 0x48.
-                  Asus doesn't support, except for as99127f rev.2 */
-               if ((!(val1 & 0x80) && (val2 == 0xa3)) ||
-                   ((val1 & 0x80) && (val2 == 0x5c))) {
-                       if (i2c_smbus_read_byte_data
-                           (client, W83781D_REG_I2C_ADDR) != address) {
-                               dev_dbg(&adapter->dev, "Detection of w83781d "
-                                       "chip failed at step 5\n");
-                               goto err_nodev;
-                       }
-               }
        }
 
-       /* We have either had a force parameter, or we have already detected the
-          Winbond. Put it now into bank 0 and Vendor ID High Byte */
+       /* Put it now into bank 0 and Vendor ID High Byte */
        i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
                (i2c_smbus_read_byte_data(client, W83781D_REG_BANK)
                 & 0x78) | 0x80);
 
-       /* Determine the chip type. */
-       if (kind <= 0) {
-               /* get vendor ID */
-               val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
-               if (val2 == 0x5c)
-                       vendid = winbond;
-               else if (val2 == 0x12)
-                       vendid = asus;
-               else {
-                       dev_dbg(&adapter->dev, "w83781d chip vendor is "
-                               "neither Winbond nor Asus\n");
-                       goto err_nodev;
-               }
-
-               val1 = i2c_smbus_read_byte_data(client, W83781D_REG_WCHIPID);
-               if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
-                       kind = w83781d;
-               else if (val1 == 0x30 && vendid == winbond)
-                       kind = w83782d;
-               else if (val1 == 0x40 && vendid == winbond && address == 0x2d)
-                       kind = w83783s;
-               else if (val1 == 0x31)
-                       kind = as99127f;
-               else {
-                       if (kind == 0)
-                               dev_warn(&adapter->dev, "Ignoring 'force' "
-                                        "parameter for unknown chip at "
-                                        "address 0x%02x\n", address);
-                       goto err_nodev;
-               }
-
-               if ((kind == w83781d || kind == w83782d)
-                && w83781d_alias_detect(client, val1)) {
-                       dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
-                               "be the same as ISA device\n", address);
-                       goto err_nodev;
-               }
+       /* Get the vendor ID */
+       val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
+       if (val2 == 0x5c)
+               vendid = winbond;
+       else if (val2 == 0x12)
+               vendid = asus;
+       else {
+               dev_dbg(&adapter->dev,
+                       "w83781d chip vendor is neither Winbond nor Asus\n");
+               goto err_nodev;
        }
 
-       if (isa)
-               mutex_unlock(&isa->update_lock);
-
-       if (kind == w83781d) {
+       /* Determine the chip type. */
+       val1 = i2c_smbus_read_byte_data(client, W83781D_REG_WCHIPID);
+       if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
                client_name = "w83781d";
-       } else if (kind == w83782d) {
+       else if (val1 == 0x30 && vendid == winbond)
                client_name = "w83782d";
-       } else if (kind == w83783s) {
+       else if (val1 == 0x40 && vendid == winbond && address == 0x2d)
                client_name = "w83783s";
-       } else if (kind == as99127f) {
+       else if (val1 == 0x31)
                client_name = "as99127f";
+       else
+               goto err_nodev;
+
+       if (val1 <= 0x30 && w83781d_alias_detect(client, val1)) {
+               dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
+                       "be the same as ISA device\n", address);
+               goto err_nodev;
        }
 
+       if (isa)
+               mutex_unlock(&isa->update_lock);
+
        strlcpy(info->type, client_name, I2C_NAME_SIZE);
 
        return 0;