[PATCH] WAN: DSCC4 driver requires generic HDLC

Another thing, reported recently to me by several people - DSCC4 WAN
driver now (and perhaps for the last couple of years+) requires the
generic HDLC. I've fixed the Kconfig and moved the DSCC4 option
under CONFIG_HDLC so it's consistent visually.

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index b5d0d7f..d5ab9cf 100644 (file)
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -57,44 +57,6 @@ config COSA
          The driver will be compiled as a module: the
          module will be called cosa.
 
-config DSCC4
-       tristate "Etinc PCISYNC serial board support"
-       depends on WAN && PCI && m
-       help
-         Driver for Etinc PCISYNC boards based on the Infineon (ex. Siemens)
-         DSCC4 chipset.
-
-         This is supposed to work with the four port card. Take a look at
-         <http://www.cogenit.fr/dscc4/> for further information about the
-         driver.
-
-         To compile this driver as a module, choose M here: the
-         module will be called dscc4.
-
-config DSCC4_PCISYNC
-       bool "Etinc PCISYNC features"
-       depends on DSCC4
-       help
-         Due to Etinc's design choice for its PCISYNC cards, some operations
-         are only allowed on specific ports of the DSCC4. This option is the
-         only way for the driver to know that it shouldn't return a success
-         code for these operations.
-
-         Please say Y if your card is an Etinc's PCISYNC.
-
-config DSCC4_PCI_RST
-       bool "Hard reset support"
-       depends on DSCC4
-       help
-         Various DSCC4 bugs forbid any reliable software reset of the ASIC.
-         As a replacement, some vendors provide a way to assert the PCI #RST
-         pin of DSCC4 through the GPIO port of the card. If you choose Y,
-         the driver will make use of this feature before module removal
-         (i.e. rmmod). The feature is known to be available on Commtech's
-         cards. Contact your manufacturer for details.
-
-         Say Y if your card supports this feature.
-
 #
 # Lan Media's board. Currently 1000, 1200, 5200, 5245
 #
@@ -323,6 +285,44 @@ config FARSYNC
          To compile this driver as a module, choose M here: the
          module will be called farsync.
 
+config DSCC4
+       tristate "Etinc PCISYNC serial board support"
+       depends on HDLC && PCI && m
+       help
+         Driver for Etinc PCISYNC boards based on the Infineon (ex. Siemens)
+         DSCC4 chipset.
+
+         This is supposed to work with the four port card. Take a look at
+         <http://www.cogenit.fr/dscc4/> for further information about the
+         driver.
+
+         To compile this driver as a module, choose M here: the
+         module will be called dscc4.
+
+config DSCC4_PCISYNC
+       bool "Etinc PCISYNC features"
+       depends on DSCC4
+       help
+         Due to Etinc's design choice for its PCISYNC cards, some operations
+         are only allowed on specific ports of the DSCC4. This option is the
+         only way for the driver to know that it shouldn't return a success
+         code for these operations.
+
+         Please say Y if your card is an Etinc's PCISYNC.
+
+config DSCC4_PCI_RST
+       bool "Hard reset support"
+       depends on DSCC4
+       help
+         Various DSCC4 bugs forbid any reliable software reset of the ASIC.
+         As a replacement, some vendors provide a way to assert the PCI #RST
+         pin of DSCC4 through the GPIO port of the card. If you choose Y,
+         the driver will make use of this feature before module removal
+         (i.e. rmmod). The feature is known to be available on Commtech's
+         cards. Contact your manufacturer for details.
+
+         Say Y if your card supports this feature.
+
 config DLCI
        tristate "Frame Relay DLCI support"
        depends on WAN