* memory. Use of these is *deprecated* (and that doesn't mean
* use the __ prefixed forms instead.) See dma-mapping.h.
*/
+#ifndef __virt_to_bus
+#define __virt_to_bus __virt_to_phys
+#define __bus_to_virt __phys_to_virt
+#endif
+
static inline __deprecated unsigned long virt_to_bus(void *x)
{
return __virt_to_bus((unsigned long)x);
#define PHYS_OFFSET UL(0xf0000000)
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
/*
* The nodes are the followings:
*
#define PHYS_OFFSET (AT91_SDRAM_BASE)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
#endif
*/
#define PHYS_OFFSET UL(0xc0000000)
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-
-#if defined(CONFIG_ARCH_CDB89712)
-
-#define __virt_to_bus(x) (x)
-#define __bus_to_virt(x) (x)
-
-#elif defined (CONFIG_ARCH_AUTCPU12)
-
-#define __virt_to_bus(x) (x)
-#define __bus_to_virt(x) (x)
-
-#else
+#if !defined(CONFIG_ARCH_CDB89712) && !defined (CONFIG_ARCH_AUTCPU12)
#define __virt_to_bus(x) ((x) - PAGE_OFFSET)
#define __bus_to_virt(x) ((x) + PAGE_OFFSET)
#define PHYS_OFFSET UL(0x10000000)
/*
- * These are exactly the same on the RiscPC as the
- * physical memory view.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
* Cache flushing area - ROM
*/
#define FLUSH_BASE_PHYS 0x00000000
#endif
-/*
- * Bus address is physical address
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
#endif /* __ASM_ARCH_MEMORY_H */
#define PHYS_OFFSET UL(0x00000000)
/*
- * We keep this 1:1 so that we don't interfere
- * with the PCMCIA memory regions
- */
-#define __virt_to_bus(x) (x)
-#define __bus_to_virt(x) (x)
-
-/*
* Cache flushing area - SRAM
*/
#define FLUSH_BASE_PHYS 0x40000000
#define PHYS_OFFSET UL(0x00000000)
-#define __bus_to_virt(x) __phys_to_virt(x)
-#define __virt_to_bus(x) __virt_to_phys(x)
-
-
#endif
extern unsigned long __virt_to_bus(unsigned long);
extern unsigned long __bus_to_virt(unsigned long);
#endif
+#define __virt_to_bus __virt_to_bus
+#define __bus_to_virt __bus_to_virt
#elif defined(CONFIG_FOOTBRIDGE_HOST)
+/*
+ * The footbridge is programmed to expose the system RAM at the corresponding
+ * address. So, if PAGE_OFFSET is 0xc0000000, RAM appears at 0xe0000000.
+ * If 0x80000000, then its exposed at 0xa0000000 on the bus. etc.
+ * The only requirement is that the RAM isn't placed at bus address 0 which
+ * would clash with VGA cards.
+ */
#define __virt_to_bus(x) ((x) - 0xe0000000)
#define __bus_to_virt(x) ((x) + 0xe0000000)
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-/*
- * Page offset:
- * ( 0xc0000000UL )
- */
#define PHYS_OFFSET UL(0x40000000)
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- *
- * There is something to do here later !, Mar 2000, Jungjun Kim
- */
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
#endif
#define PHYS_OFFSET UL(0x08000000)
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) (x - PAGE_OFFSET + PHYS_OFFSET)
-#define __bus_to_virt(x) (x - PHYS_OFFSET + PAGE_OFFSET)
-
#endif
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x00000000)
-#define BUS_OFFSET UL(0x80000000)
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
+#define BUS_OFFSET UL(0x80000000)
#define __virt_to_bus(x) (x - PAGE_OFFSET + BUS_OFFSET)
#define __bus_to_virt(x) (x - BUS_OFFSET + PAGE_OFFSET)
#define IOP13XX_PMMR_P_START (IOP13XX_PMMR_PHYS_MEM_BASE)
#define IOP13XX_PMMR_P_END (IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_SIZE)
-/*
- * Virtual view <-> PCI DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-
-/* RAM has 1:1 mapping on the PCIe/x Busses */
-#define __virt_to_bus(x) (__virt_to_phys(x))
-#define __bus_to_virt(x) (__phys_to_virt(x))
-
static inline dma_addr_t __virt_to_lbus(unsigned long x)
{
return x + IOP13XX_PMMR_PHYS_MEM_BASE - IOP13XX_PMMR_VIRT_MEM_BASE;
if (is_lbus_device(dev) && __is_lbus_dma(__dma)) \
__virt = __lbus_to_virt(__dma); \
else \
- __virt = __bus_to_virt(__dma); \
+ __virt = __phys_to_virt(__dma); \
(void *)__virt; \
})
if (is_lbus_device(dev) && __is_lbus_virt(__virt)) \
__dma = __virt_to_lbus(__virt); \
else \
- __dma = __virt_to_bus(__virt); \
+ __dma = __virt_to_phys(__virt); \
__dma; \
})
*/
#define PHYS_OFFSET UL(0xa0000000)
-/*
- * Virtual view <-> PCI DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) (__virt_to_phys(x))
-#define __bus_to_virt(x) (__phys_to_virt(x))
-
-
#endif
*/
#define PHYS_OFFSET UL(0x00000000)
-/*
- * Virtual view <-> PCI DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) (__virt_to_phys(x))
-#define __bus_to_virt(x) (__phys_to_virt(x))
-
-
#endif
#define PHYS_OFFSET UL(0x00000000)
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
#include <mach/ixp2000-regs.h>
#define __virt_to_bus(v) \
*/
#define PHYS_OFFSET (0x00000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#ifndef __ASSEMBLY__
-
#define __virt_to_bus(v) \
({ unsigned int ret; \
ret = ((__virt_to_phys(v) - 0x00000000) + \
#define arch_is_coherent() 1
#endif
-
-
-#endif
#endif
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- *
- * These are dummies for now.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
#endif
#define PHYS_OFFSET UL(0x00000000)
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-
#endif
(dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
#define __arch_page_to_dma(dev, x) __arch_virt_to_dma(dev, page_address(x))
-#else
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
#endif
#endif
*/
#define PHYS_OFFSET UL(0xf0000000)
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
/*
* Cache flushing area - ROM
*/
*/
#define PHYS_OFFSET UL(0xc0000000)
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
#ifdef CONFIG_DISCONTIGMEM
/*
#define PHYS_OFFSET UL(0x00000000)
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-
#endif
/* physical offset of RAM */
#define PHYS_OFFSET UL(0x10000000)
-/* bus address and physical addresses are identical */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
#endif
#define PHYS_OFFSET UL(0x00000000)
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-
#endif
#define PHYS_OFFSET UL(0x80000000)
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
#endif
#define PHYS_OFFSET UL(0x00000000)
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
#endif
#define PHYS_OFFSET UL(0x00000000)
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-
#endif
*/
#define PHYS_OFFSET (0x80000000)
-#define __virt_to_bus(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
-#define __bus_to_virt(x) ((x) + PAGE_OFFSET - PHYS_OFFSET)
-
#endif
#define PHYS_OFFSET UL(0xa0000000)
/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
* The nodes are matched with the physical SDRAM banks as follows:
*
* node 0: 0xa0000000-0xa3ffffff --> 0xc0000000-0xc3ffffff
*/
#define PHYS_OFFSET UL(0x00000000)
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) ((x) - PAGE_OFFSET)
-#define __bus_to_virt(x) ((x) + PAGE_OFFSET)
-
#endif
#define PHYS_OFFSET UL(0x10000000)
/*
- * These are exactly the same on the RiscPC as the
- * physical memory view.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
* Cache flushing area - ROM
*/
#define FLUSH_BASE_PHYS 0x00000000
#define PHYS_OFFSET UL(0x0C000000)
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
#endif
#define PHYS_OFFSET UL(0x30000000)
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
#endif
#endif
/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- *
- * On the SA1100, bus addresses are equivalent to physical addresses.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
* Because of the wide memory address space between physical RAM banks on the
* SA1100, it's much convenient to use Linux's SparseMEM support to implement
* our memory map representation. Assuming all memory nodes have equal access
#endif
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
/*
* Cache flushing area
*/
*/
#define PHYS_OFFSET UL(0x00000000)
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) ((x) - PAGE_OFFSET)
-#define __bus_to_virt(x) ((x) + PAGE_OFFSET)
-
#endif
#include <mach/hardware.h>
-/*
- * Virtual view <-> DMA view memory address translations
- * This macro is used to translate the virtual address to an address
- * suitable to be passed to set_dma_addr()
- */
-#define __virt_to_bus(a) __virt_to_phys(a)
-
-/*
- * Used to convert an address for DMA operations to an address that the
- * kernel can use.
- */
-#define __bus_to_virt(a) __phys_to_virt(a)
-
#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
#endif
/*
- * Conversion between SDRAM and fake PCI bus, used by USB
- * NOTE: Physical address must be converted to Local Bus address
- * on OMAP-1510 only
- */
-
-/*
* Bus address is physical address, except for OMAP-1510 Local Bus.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
* OMAP-1510 bus address is translated into a Local Bus address if the
* OMAP bus type is lbus. We do the address translation based on the
* device overriding the defaults used in the dma-mapping API.
#define __arch_page_to_dma(dev, page) ({is_lbus_device(dev) ? \
(dma_addr_t)virt_to_lbus(page_address(page)) : \
- (dma_addr_t)__virt_to_bus(page_address(page));})
+ (dma_addr_t)__virt_to_phys(page_address(page));})
#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \
lbus_to_virt(addr) : \
- __bus_to_virt(addr)); })
+ __phys_to_virt(addr)); })
#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \
(dma_addr_t) (is_lbus_device(dev) ? \
virt_to_lbus(__addr) : \
- __virt_to_bus(__addr)); })
+ __virt_to_phys(__addr)); })
#endif /* CONFIG_ARCH_OMAP15XX */
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff