USB: cypress_m8.h: checkpatch cleanups

Minor whitespace cleanups to make checkpatch happy.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h
index 1fd360e..67cf608 100644 (file)
--- a/drivers/usb/serial/cypress_m8.h
+++ b/drivers/usb/serial/cypress_m8.h
@@ -1,27 +1,32 @@
 #ifndef CYPRESS_M8_H
 #define CYPRESS_M8_H
 
-/* definitions and function prototypes used for the cypress USB to Serial controller */
+/*
+ * definitions and function prototypes used for the cypress USB to Serial
+ * controller
+ */
 
-/* For sending our feature buffer - controlling serial communication states */
-/* Linux HID has no support for serial devices so we do this through the driver */
-#define HID_REQ_GET_REPORT 0x01
-#define HID_REQ_SET_REPORT 0x09
+/*
+ * For sending our feature buffer - controlling serial communication states.
+ * Linux HID has no support for serial devices so we do this through the driver
+ */
+#define HID_REQ_GET_REPORT     0x01
+#define HID_REQ_SET_REPORT     0x09
 
 /* List other cypress USB to Serial devices here, and add them to the id_table */
 
 /* DeLorme Earthmate USB - a GPS device */
-#define        VENDOR_ID_DELORME                0x1163
-#define PRODUCT_ID_EARTHMATEUSB                 0x0100
-#define PRODUCT_ID_EARTHMATEUSB_LT20    0x0200
+#define VENDOR_ID_DELORME              0x1163
+#define PRODUCT_ID_EARTHMATEUSB                0x0100
+#define PRODUCT_ID_EARTHMATEUSB_LT20   0x0200
 
 /* Cypress HID->COM RS232 Adapter */
-#define VENDOR_ID_CYPRESS               0x04b4
-#define PRODUCT_ID_CYPHIDCOM            0x5500
+#define VENDOR_ID_CYPRESS              0x04b4
+#define PRODUCT_ID_CYPHIDCOM           0x5500
 
 /* Powercom UPS, chip CY7C63723 */
-#define VENDOR_ID_POWERCOM              0x0d9f
-#define PRODUCT_ID_UPS                  0x0002
+#define VENDOR_ID_POWERCOM             0x0d9f
+#define PRODUCT_ID_UPS                 0x0002
 
 /* Nokia CA-42 USB to serial cable */
 #define VENDOR_ID_DAZZLE               0x07d0
@@ -29,17 +34,17 @@
 /* End of device listing */
 
 /* Used for setting / requesting serial line settings */
-#define CYPRESS_SET_CONFIG 0x01
-#define CYPRESS_GET_CONFIG 0x02
+#define CYPRESS_SET_CONFIG     0x01
+#define CYPRESS_GET_CONFIG     0x02
 
 /* Used for throttle control */
-#define THROTTLED 0x1
-#define ACTUALLY_THROTTLED 0x2
+#define THROTTLED              0x1
+#define ACTUALLY_THROTTLED     0x2
 
-/* chiptypes - used in case firmware differs from the generic form ... offering
- *     different baud speeds/etc.
+/*
+ * chiptypes - used in case firmware differs from the generic form ... offering
+ * different baud speeds/etc.
  */
-
 #define CT_EARTHMATE   0x01
 #define CT_CYPHIDCOM   0x02
 #define CT_CA42V2      0x03
@@ -50,15 +55,15 @@
 /* these are sent / read at byte 0 of the input/output hid reports */
 /* You can find these values defined in the CY4601 USB to Serial design notes */
 
-#define CONTROL_DTR    0x20    /* data terminal ready - flow control - host to device */
+#define CONTROL_DTR    0x20    /* data terminal ready - flow control - host to device */
 #define UART_DSR       0x20    /* data set ready - flow control - device to host */
-#define CONTROL_RTS    0x10    /* request to send - flow control - host to device */
+#define CONTROL_RTS    0x10    /* request to send - flow control - host to device */
 #define UART_CTS       0x10    /* clear to send - flow control - device to host */
-#define        UART_RI         0x10    /* ring indicator - modem - device to host */
+#define UART_RI                0x10    /* ring indicator - modem - device to host */
 #define UART_CD                0x40    /* carrier detect - modem - device to host */
-#define CYP_ERROR      0x08    /* received from input report - device to host */
+#define CYP_ERROR      0x08    /* received from input report - device to host */
 /* Note - the below has nothing to do with the "feature report" reset */
-#define CONTROL_RESET  0x08    /* sent with output report - host to device */
+#define CONTROL_RESET  0x08    /* sent with output report - host to device */
 
 /* End of RS-232 protocol definitions */