Blackfin: drop unused MMR defines that only cause bad code to be written

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

diff --git a/arch/blackfin/mach-bf518/include/mach/blackfin.h b/arch/blackfin/mach-bf518/include/mach/blackfin.h
index e8e14c2..83421d3 100644 (file)
--- a/arch/blackfin/mach-bf518/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf518/include/mach/blackfin.h
@@ -68,11 +68,6 @@
 #endif
 #endif
 
-/* UART_IIR Register */
-#define STATUS(x)      ((x << 1) & 0x06)
-#define STATUS_P1      0x02
-#define STATUS_P0      0x01
-
 #define BFIN_UART_NR_PORTS     2
 
 #define OFFSET_THR              0x00   /* Transmit Holding register            */
@@ -88,11 +83,6 @@
 #define OFFSET_SCR              0x1C   /* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24   /* Global Control Register              */
 
-/* DPMC*/
-#define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
-#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
-#define STOPCK_OFF STOPCK
-
 /* PLL_DIV Masks                                                                                                       */
 #define CCLK_DIV1 CSEL_DIV1    /*          CCLK = VCO / 1                                  */
 #define CCLK_DIV2 CSEL_DIV2    /*          CCLK = VCO / 2                                  */

diff --git a/arch/blackfin/mach-bf527/include/mach/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h
index 03665a8..ea9cb0f 100644 (file)
--- a/arch/blackfin/mach-bf527/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf527/include/mach/blackfin.h
@@ -56,11 +56,6 @@
 #endif
 #endif
 
-/* UART_IIR Register */
-#define STATUS(x)      ((x << 1) & 0x06)
-#define STATUS_P1      0x02
-#define STATUS_P0      0x01
-
 #define BFIN_UART_NR_PORTS     2
 
 #define OFFSET_THR              0x00   /* Transmit Holding register            */
@@ -76,11 +71,6 @@
 #define OFFSET_SCR              0x1C   /* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24   /* Global Control Register              */
 
-/* DPMC*/
-#define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
-#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
-#define STOPCK_OFF STOPCK
-
 /* PLL_DIV Masks                                                                                                       */
 #define CCLK_DIV1 CSEL_DIV1    /*          CCLK = VCO / 1                                  */
 #define CCLK_DIV2 CSEL_DIV2    /*          CCLK = VCO / 2                                  */

diff --git a/arch/blackfin/mach-bf533/dma.c b/arch/blackfin/mach-bf533/dma.c
index 0a6eb8f..7a443c3 100644 (file)
--- a/arch/blackfin/mach-bf533/dma.c
+++ b/arch/blackfin/mach-bf533/dma.c
@@ -76,12 +76,12 @@ int channel2irq(unsigned int channel)
                ret_irq = IRQ_SPI;
                break;
 
-       case CH_UART_RX:
-               ret_irq = IRQ_UART_RX;
+       case CH_UART0_RX:
+               ret_irq = IRQ_UART0_RX;
                break;
 
-       case CH_UART_TX:
-               ret_irq = IRQ_UART_TX;
+       case CH_UART0_TX:
+               ret_irq = IRQ_UART0_TX;
                break;
 
        case CH_MEM_STREAM0_SRC:

diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index 4062e24..6965b40 100644 (file)
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -131,11 +131,11 @@ struct bfin_serial_res {
 struct bfin_serial_res bfin_serial_resource[] = {
        {
        0xFFC00400,
-       IRQ_UART_RX,
-       IRQ_UART_ERROR,
+       IRQ_UART0_RX,
+       IRQ_UART0_ERROR,
 #ifdef CONFIG_SERIAL_BFIN_DMA
-       CH_UART_TX,
-       CH_UART_RX,
+       CH_UART0_TX,
+       CH_UART0_RX,
 #endif
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
        CONFIG_UART0_CTS_PIN,

diff --git a/arch/blackfin/mach-bf533/include/mach/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h
index 39aa175..499e897 100644 (file)
--- a/arch/blackfin/mach-bf533/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf533/include/mach/blackfin.h
@@ -43,13 +43,6 @@
 
 #define BFIN_UART_NR_PORTS      1
 
-#define CH_UART_RX CH_UART0_RX
-#define CH_UART_TX CH_UART0_TX
-
-#define IRQ_UART_ERROR IRQ_UART0_ERROR
-#define IRQ_UART_RX    IRQ_UART0_RX
-#define IRQ_UART_TX    IRQ_UART0_TX
-
 #define OFFSET_THR              0x00   /* Transmit Holding register            */
 #define OFFSET_RBR              0x00   /* Receive Buffer register              */
 #define OFFSET_DLL              0x00   /* Divisor Latch (Low-Byte)             */

diff --git a/arch/blackfin/mach-bf537/dma.c b/arch/blackfin/mach-bf537/dma.c
index 8118505..d23fc0e 100644 (file)
--- a/arch/blackfin/mach-bf537/dma.c
+++ b/arch/blackfin/mach-bf537/dma.c
@@ -96,12 +96,12 @@ int channel2irq(unsigned int channel)
                ret_irq = IRQ_SPI;
                break;
 
-       case CH_UART_RX:
-               ret_irq = IRQ_UART_RX;
+       case CH_UART0_RX:
+               ret_irq = IRQ_UART0_RX;
                break;
 
-       case CH_UART_TX:
-               ret_irq = IRQ_UART_TX;
+       case CH_UART0_TX:
+               ret_irq = IRQ_UART0_TX;
                break;
 
        case CH_MEM_STREAM0_SRC:

diff --git a/arch/blackfin/mach-bf537/include/mach/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h
index f5e5015..9ee8834 100644 (file)
--- a/arch/blackfin/mach-bf537/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf537/include/mach/blackfin.h
@@ -45,96 +45,11 @@
 #if !defined(__ASSEMBLY__)
 #include "cdefBF534.h"
 
-/* UART 0*/
-#define bfin_read_UART_THR() bfin_read_UART0_THR()
-#define bfin_write_UART_THR(val) bfin_write_UART0_THR(val)
-#define bfin_read_UART_RBR() bfin_read_UART0_RBR()
-#define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val)
-#define bfin_read_UART_DLL() bfin_read_UART0_DLL()
-#define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val)
-#define bfin_read_UART_IER() bfin_read_UART0_IER()
-#define bfin_write_UART_IER(val) bfin_write_UART0_IER(val)
-#define bfin_read_UART_DLH() bfin_read_UART0_DLH()
-#define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val)
-#define bfin_read_UART_IIR() bfin_read_UART0_IIR()
-#define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val)
-#define bfin_read_UART_LCR() bfin_read_UART0_LCR()
-#define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val)
-#define bfin_read_UART_MCR() bfin_read_UART0_MCR()
-#define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val)
-#define bfin_read_UART_LSR() bfin_read_UART0_LSR()
-#define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val)
-#define bfin_read_UART_SCR() bfin_read_UART0_SCR()
-#define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val)
-#define bfin_read_UART_GCTL() bfin_read_UART0_GCTL()
-#define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val)
-
 #if defined(CONFIG_BF537) || defined(CONFIG_BF536)
 #include "cdefBF537.h"
 #endif
 #endif
 
-/* MAP used DEFINES from BF533 to BF537 - so we don't need to change them in the driver, kernel, etc. */
-
-/* UART_IIR Register */
-#define STATUS(x)      ((x << 1) & 0x06)
-#define STATUS_P1      0x02
-#define STATUS_P0      0x01
-
-/* DMA Channel */
-#define bfin_read_CH_UART_RX() bfin_read_CH_UART0_RX()
-#define bfin_write_CH_UART_RX(val) bfin_write_CH_UART0_RX(val)
-#define CH_UART_RX CH_UART0_RX
-#define bfin_read_CH_UART_TX() bfin_read_CH_UART0_TX()
-#define bfin_write_CH_UART_TX(val) bfin_write_CH_UART0_TX(val)
-#define CH_UART_TX CH_UART0_TX
-
-/* System Interrupt Controller */
-#define bfin_read_IRQ_UART_RX() bfin_read_IRQ_UART0_RX()
-#define bfin_write_IRQ_UART_RX(val) bfin_write_IRQ_UART0_RX(val)
-#define IRQ_UART_RX IRQ_UART0_RX
-#define bfin_read_IRQ_UART_TX() bfin_read_IRQ_UART0_TX()
-#define bfin_write_IRQ_UART_TX(val) bfin_write_IRQ_UART0_TX(val)
-#define        IRQ_UART_TX IRQ_UART0_TX
-#define bfin_read_IRQ_UART_ERROR() bfin_read_IRQ_UART0_ERROR()
-#define bfin_write_IRQ_UART_ERROR(val) bfin_write_IRQ_UART0_ERROR(val)
-#define        IRQ_UART_ERROR IRQ_UART0_ERROR
-
-/* MMR Registers*/
-#define bfin_read_UART_THR() bfin_read_UART0_THR()
-#define bfin_write_UART_THR(val) bfin_write_UART0_THR(val)
-#define BFIN_UART_THR UART0_THR
-#define bfin_read_UART_RBR() bfin_read_UART0_RBR()
-#define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val)
-#define BFIN_UART_RBR UART0_RBR
-#define bfin_read_UART_DLL() bfin_read_UART0_DLL()
-#define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val)
-#define BFIN_UART_DLL UART0_DLL
-#define bfin_read_UART_IER() bfin_read_UART0_IER()
-#define bfin_write_UART_IER(val) bfin_write_UART0_IER(val)
-#define BFIN_UART_IER UART0_IER
-#define bfin_read_UART_DLH() bfin_read_UART0_DLH()
-#define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val)
-#define BFIN_UART_DLH UART0_DLH
-#define bfin_read_UART_IIR() bfin_read_UART0_IIR()
-#define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val)
-#define BFIN_UART_IIR UART0_IIR
-#define bfin_read_UART_LCR() bfin_read_UART0_LCR()
-#define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val)
-#define BFIN_UART_LCR UART0_LCR
-#define bfin_read_UART_MCR() bfin_read_UART0_MCR()
-#define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val)
-#define BFIN_UART_MCR UART0_MCR
-#define bfin_read_UART_LSR() bfin_read_UART0_LSR()
-#define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val)
-#define BFIN_UART_LSR UART0_LSR
-#define bfin_read_UART_SCR() bfin_read_UART0_SCR()
-#define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val)
-#define BFIN_UART_SCR  UART0_SCR
-#define bfin_read_UART_GCTL() bfin_read_UART0_GCTL()
-#define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val)
-#define BFIN_UART_GCTL UART0_GCTL
-
 #define BFIN_UART_NR_PORTS     2
 
 #define OFFSET_THR              0x00   /* Transmit Holding register            */
@@ -150,11 +65,6 @@
 #define OFFSET_SCR              0x1C   /* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24   /* Global Control Register              */
 
-/* DPMC*/
-#define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
-#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
-#define STOPCK_OFF STOPCK
-
 /* PLL_DIV Masks                                                                                                       */
 #define CCLK_DIV1 CSEL_DIV1    /*          CCLK = VCO / 1                                  */
 #define CCLK_DIV2 CSEL_DIV2    /*          CCLK = VCO / 2                                  */

diff --git a/arch/blackfin/mach-bf538/include/mach/blackfin.h b/arch/blackfin/mach-bf538/include/mach/blackfin.h
index 9496196..5ecee16 100644 (file)
--- a/arch/blackfin/mach-bf538/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf538/include/mach/blackfin.h
@@ -47,11 +47,6 @@
 #endif
 #endif
 
-/* UART_IIR Register */
-#define STATUS(x)      ((x << 1) & 0x06)
-#define STATUS_P1      0x02
-#define STATUS_P0      0x01
-
 #define BFIN_UART_NR_PORTS     3
 
 #define OFFSET_THR              0x00   /* Transmit Holding register            */
@@ -67,11 +62,6 @@
 #define OFFSET_SCR              0x1C   /* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24   /* Global Control Register              */
 
-/* DPMC*/
-#define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
-#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
-#define STOPCK_OFF STOPCK
-
 /* PLL_DIV Masks                                                                                                       */
 #define CCLK_DIV1 CSEL_DIV1    /*          CCLK = VCO / 1                                  */
 #define CCLK_DIV2 CSEL_DIV2    /*          CCLK = VCO / 2                                  */

diff --git a/arch/blackfin/mach-bf548/include/mach/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h
index 6b97396..318667b 100644 (file)
--- a/arch/blackfin/mach-bf548/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf548/include/mach/blackfin.h
@@ -72,97 +72,8 @@
 #include "cdefBF549.h"
 #endif
 
-/* UART 1*/
-#define bfin_read_UART_THR()           bfin_read_UART1_THR()
-#define bfin_write_UART_THR(val)       bfin_write_UART1_THR(val)
-#define bfin_read_UART_RBR()           bfin_read_UART1_RBR()
-#define bfin_write_UART_RBR(val)       bfin_write_UART1_RBR(val)
-#define bfin_read_UART_DLL()           bfin_read_UART1_DLL()
-#define bfin_write_UART_DLL(val)       bfin_write_UART1_DLL(val)
-#define bfin_read_UART_IER()           bfin_read_UART1_IER()
-#define bfin_write_UART_IER(val)       bfin_write_UART1_IER(val)
-#define bfin_read_UART_DLH()           bfin_read_UART1_DLH()
-#define bfin_write_UART_DLH(val)       bfin_write_UART1_DLH(val)
-#define bfin_read_UART_IIR()           bfin_read_UART1_IIR()
-#define bfin_write_UART_IIR(val)       bfin_write_UART1_IIR(val)
-#define bfin_read_UART_LCR()           bfin_read_UART1_LCR()
-#define bfin_write_UART_LCR(val)       bfin_write_UART1_LCR(val)
-#define bfin_read_UART_MCR()           bfin_read_UART1_MCR()
-#define bfin_write_UART_MCR(val)       bfin_write_UART1_MCR(val)
-#define bfin_read_UART_LSR()           bfin_read_UART1_LSR()
-#define bfin_write_UART_LSR(val)       bfin_write_UART1_LSR(val)
-#define bfin_read_UART_SCR()           bfin_read_UART1_SCR()
-#define bfin_write_UART_SCR(val)       bfin_write_UART1_SCR(val)
-#define bfin_read_UART_GCTL()          bfin_read_UART1_GCTL()
-#define bfin_write_UART_GCTL(val)      bfin_write_UART1_GCTL(val)
-
 #endif
 
-/* MAP used DEFINES from BF533 to BF54x - so we don't need to change 
- * them in the driver, kernel, etc. */
-
-/* UART_IIR Register */
-#define STATUS(x)      ((x << 1) & 0x06)
-#define STATUS_P1      0x02
-#define STATUS_P0      0x01
-
-/* UART 0*/
-
-/* DMA Channel */
-#define bfin_read_CH_UART_RX()         bfin_read_CH_UART1_RX()
-#define bfin_write_CH_UART_RX(val)     bfin_write_CH_UART1_RX(val)
-#define bfin_read_CH_UART_TX()         bfin_read_CH_UART1_TX()
-#define bfin_write_CH_UART_TX(val)     bfin_write_CH_UART1_TX(val)
-#define CH_UART_RX                     CH_UART1_RX
-#define CH_UART_TX                     CH_UART1_TX
-
-/* System Interrupt Controller */
-#define bfin_read_IRQ_UART_RX()                bfin_read_IRQ_UART1_RX()
-#define bfin_write_IRQ_UART_RX(val)    bfin_write_IRQ_UART1_RX(val)
-#define bfin_read_IRQ_UART_TX()                bfin_read_IRQ_UART1_TX()
-#define bfin_write_IRQ_UART_TX(val)    bfin_write_IRQ_UART1_TX(val)
-#define bfin_read_IRQ_UART_ERROR()     bfin_read_IRQ_UART1_ERROR()
-#define bfin_write_IRQ_UART_ERROR(val) bfin_write_IRQ_UART1_ERROR(val)
-#define IRQ_UART_RX                    IRQ_UART1_RX
-#define        IRQ_UART_TX                     IRQ_UART1_TX
-#define        IRQ_UART_ERROR                  IRQ_UART1_ERROR
-
-/* MMR Registers*/
-#define bfin_read_UART_THR()           bfin_read_UART1_THR()
-#define bfin_write_UART_THR(val)       bfin_write_UART1_THR(val)
-#define bfin_read_UART_RBR()           bfin_read_UART1_RBR()
-#define bfin_write_UART_RBR(val)       bfin_write_UART1_RBR(val)
-#define bfin_read_UART_DLL()           bfin_read_UART1_DLL()
-#define bfin_write_UART_DLL(val)       bfin_write_UART1_DLL(val)
-#define bfin_read_UART_IER()           bfin_read_UART1_IER()
-#define bfin_write_UART_IER(val)       bfin_write_UART1_IER(val)
-#define bfin_read_UART_DLH()           bfin_read_UART1_DLH()
-#define bfin_write_UART_DLH(val)       bfin_write_UART1_DLH(val)
-#define bfin_read_UART_IIR()           bfin_read_UART1_IIR()
-#define bfin_write_UART_IIR(val)       bfin_write_UART1_IIR(val)
-#define bfin_read_UART_LCR()           bfin_read_UART1_LCR()
-#define bfin_write_UART_LCR(val)       bfin_write_UART1_LCR(val)
-#define bfin_read_UART_MCR()           bfin_read_UART1_MCR()
-#define bfin_write_UART_MCR(val)       bfin_write_UART1_MCR(val)
-#define bfin_read_UART_LSR()           bfin_read_UART1_LSR()
-#define bfin_write_UART_LSR(val)       bfin_write_UART1_LSR(val)
-#define bfin_read_UART_SCR()           bfin_read_UART1_SCR()
-#define bfin_write_UART_SCR(val)       bfin_write_UART1_SCR(val)
-#define bfin_read_UART_GCTL()          bfin_read_UART1_GCTL()
-#define bfin_write_UART_GCTL(val)      bfin_write_UART1_GCTL(val)
-
-#define BFIN_UART_THR                  UART1_THR
-#define BFIN_UART_RBR                  UART1_RBR
-#define BFIN_UART_DLL                  UART1_DLL
-#define BFIN_UART_IER                  UART1_IER
-#define BFIN_UART_DLH                  UART1_DLH
-#define BFIN_UART_IIR                  UART1_IIR
-#define BFIN_UART_LCR                  UART1_LCR
-#define BFIN_UART_MCR                  UART1_MCR
-#define BFIN_UART_LSR                  UART1_LSR
-#define BFIN_UART_SCR                  UART1_SCR
-#define BFIN_UART_GCTL                 UART1_GCTL
-
 #define BFIN_UART_NR_PORTS     4
 
 #define OFFSET_DLL              0x00   /* Divisor Latch (Low-Byte)             */