[ARM] pxa: remove incorrect select PXA_SSP in Kconfig

PXA_SSP is actually used by drivers like drivers/spi/pxa2xx_spi.c and
sound/soc/pxa/pxa-ssp.c, not by boards. Remove those incorrect 'select'
from Kconfig and make SOC_PXA_SSP to select.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 6dd450a..352dc4f 100644 (file)
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -19,7 +19,6 @@ config MACH_MAINSTONE
 config MACH_ZYLONITE
        bool
        select PXA3xx
-       select PXA_SSP
        select HAVE_PWM
        select PXA_HAVE_BOARD_IRQS
 
@@ -39,7 +38,6 @@ config MACH_LITTLETON
        select PXA3xx
        select CPU_PXA300
        select CPU_PXA310
-       select PXA_SSP
 
 config MACH_TAVOREVB
        bool "PXA930 Evaluation Board (aka TavorEVB)"
@@ -98,7 +96,6 @@ config MACH_ARMCORE
        select PXA27x
        select IWMMXT
        select PXA25x
-       select PXA_SSP
 
 config MACH_EM_X270
        bool "CompuLab EM-x270 platform"
@@ -161,7 +158,6 @@ config MACH_XCEP
        select MTD_CFI
        select MTD_CHAR
        select SMC91X
-       select PXA_SSP
        help
          PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
          Tuned for usage in Libera instruments for particle accelerators.
@@ -180,7 +176,6 @@ config MACH_TRIZEPS4WL
        depends on TRIZEPS_PXA
        select TRIZEPS_PCMCIA
        select PXA27x
-       select PXA_SSP
 
 choice
        prompt "Select base board for Trizeps module"
@@ -217,7 +212,6 @@ config MACH_PCM027
        bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
        select PXA27x
        select IWMMXT
-       select PXA_SSP
        select PXA_HAVE_BOARD_IRQS
 
 config MACH_PCM990_BASEBOARD
@@ -261,7 +255,6 @@ config MACH_H4700
        bool "HP iPAQ hx4700"
        select PXA27x
        select IWMMXT
-       select PXA_SSP
        select HAVE_PWM
        select PXA_HAVE_BOARD_IRQS
 
@@ -277,7 +270,6 @@ config MACH_MAGICIAN
        bool "Enable HTC Magician Support"
        select PXA27x
        select IWMMXT
-       select PXA_SSP
        select HAVE_PWM
        select PXA_HAVE_BOARD_IRQS
 
@@ -431,13 +423,11 @@ config MACH_RAUMFELD_CONNECTOR
        bool "Raumfeld Connector"
        select PXA3xx
        select CPU_PXA300
-       select PXA_SSP
 
 config MACH_RAUMFELD_SPEAKER
        bool "Raumfeld Speaker"
        select PXA3xx
        select CPU_PXA300
-       select PXA_SSP
 
 config PXA_SHARPSL
        bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
@@ -466,7 +456,6 @@ config MACH_POODLE
        depends on PXA_SHARPSL
        select PXA25x
        select SHARP_LOCOMO
-       select PXA_SSP
        select PXA_HAVE_BOARD_IRQS
 
 config MACH_CORGI
@@ -636,14 +625,12 @@ config CPU_PXA950
 
 config PXA_SHARP_C7xx
        bool
-       select PXA_SSP
        select SHARPSL_PM
        help
          Enable support for all Sharp C7xx models
 
 config PXA_SHARP_Cxx00
        bool
-       select PXA_SSP
        select SHARPSL_PM
        help
          Enable common support for Sharp Cxx00 models

diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index 376e14a..78e6121 100644 (file)
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -23,6 +23,7 @@ config SND_PXA2XX_SOC_I2S
 
 config SND_PXA_SOC_SSP
        tristate
+       select PXA_SSP
 
 config SND_PXA2XX_SOC_CORGI
        tristate "SoC Audio support for Sharp Zaurus SL-C7x0"