if (!save)
return 0;
- spin_lock_irqsave(&sachip->lock, flags);
-
/*
* Ensure that the SA1111 is still here.
* FIXME: shouldn't do this here.
* First of all, wake up the chip.
*/
sa1111_wake(sachip);
+
+ /*
+ * Only lock for write ops. Also, sa1111_wake must be called with
+ * released spinlock!
+ */
+ spin_lock_irqsave(&sachip->lock, flags);
+
sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
}
EXPORT_SYMBOL(clk_disable);
-/* We have a fixed clock alone, for now */
+static struct clk clk_24 = {
+ .rate = 2400000,
+};
+
static struct clk clk_48 = {
.rate = 48 * 1000 * 1000,
};
}
static struct clk_lookup lookups[] = {
+ CLK(&clk_24, "mtu0"),
+ CLK(&clk_24, "mtu1"),
CLK(&clk_48, "uart0"),
CLK(&clk_48, "uart1"),
CLK(&clk_default, "gpio.0"),
CLK(&clk_default, "rng"),
};
-static int __init clk_init(void)
+int __init clk_init(void)
{
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
return 0;
}
-
-arch_initcall(clk_init);
struct clk {
unsigned long rate;
};
+
+int __init clk_init(void);
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
+#include "clock.h"
+
#define __MEM_4K_RESOURCE(x) \
.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
/* This modified VIC cell has two register blocks, at 0 and 0x20 */
vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START + 0, ~0, 0);
vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0);
+
+ /*
+ * Init clocks here so that they are available for system timer
+ * initialization.
+ */
+ clk_init();
}
/*
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o
obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o
obj-$(CONFIG_MACH_U5500) += board-u5500.o
-obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
#include <asm/clkdev.h>
+#include <plat/mtu.h>
#include <mach/hardware.h>
#include "clock.h"
#define PRCM_DMACLK_MGT 0x074
#define PRCM_B2R2CLK_MGT 0x078
#define PRCM_TVCLK_MGT 0x07C
+#define PRCM_TCR 0x1C8
+#define PRCM_TCR_STOPPED (1 << 16)
+#define PRCM_TCR_DOZE_MODE (1 << 17)
#define PRCM_UNIPROCLK_MGT 0x278
#define PRCM_SSPCLK_MGT 0x280
#define PRCM_RNGCLK_MGT 0x284
}
EXPORT_SYMBOL(clk_disable);
+/*
+ * The MTU has a separate, rather complex muxing setup
+ * with alternative parents (peripheral cluster or
+ * ULP or fixed 32768 Hz) depending on settings
+ */
+static unsigned long clk_mtu_get_rate(struct clk *clk)
+{
+ void __iomem *addr = __io_address(U8500_PRCMU_BASE)
+ + PRCM_TCR;
+ u32 tcr = readl(addr);
+ int mtu = (int) clk->data;
+ /*
+ * One of these is selected eventually
+ * TODO: Replace the constant with a reference
+ * to the ULP source once this is modeled.
+ */
+ unsigned long clk32k = 32768;
+ unsigned long mturate;
+ unsigned long retclk;
+
+ /* Get the rate from the parent as a default */
+ if (clk->parent_periph)
+ mturate = clk_get_rate(clk->parent_periph);
+ else if (clk->parent_cluster)
+ mturate = clk_get_rate(clk->parent_cluster);
+ else
+ /* We need to be connected SOMEWHERE */
+ BUG();
+
+ /*
+ * Are we in doze mode?
+ * In this mode the parent peripheral or the fixed 32768 Hz
+ * clock is fed into the block.
+ */
+ if (!(tcr & PRCM_TCR_DOZE_MODE)) {
+ /*
+ * Here we're using the clock input from the APE ULP
+ * clock domain. But first: are the timers stopped?
+ */
+ if (tcr & PRCM_TCR_STOPPED) {
+ clk32k = 0;
+ mturate = 0;
+ } else {
+ /* Else default mode: 0 and 2.4 MHz */
+ clk32k = 0;
+ if (cpu_is_u5500())
+ /* DB5500 divides by 8 */
+ mturate /= 8;
+ else if (cpu_is_u8500ed()) {
+ /*
+ * This clocking setting must not be used
+ * in the ED chip, it is simply not
+ * connected anywhere!
+ */
+ mturate = 0;
+ BUG();
+ } else
+ /*
+ * In this mode the ulp38m4 clock is divided
+ * by a factor 16, on the DB8500 typically
+ * 38400000 / 16 ~ 2.4 MHz.
+ * TODO: Replace the constant with a reference
+ * to the ULP source once this is modeled.
+ */
+ mturate = 38400000 / 16;
+ }
+ }
+
+ /* Return the clock selected for this MTU */
+ if (tcr & (1 << mtu))
+ retclk = clk32k;
+ else
+ retclk = mturate;
+
+ pr_info("MTU%d clock rate: %lu Hz\n", mtu, retclk);
+ return retclk;
+}
+
unsigned long clk_get_rate(struct clk *clk)
{
unsigned long rate;
+ /*
+ * If there is a custom getrate callback for this clock,
+ * it will take precedence.
+ */
+ if (clk->get_rate)
+ return clk->get_rate(clk);
+
if (clk->ops && clk->ops->get_rate)
return clk->ops->get_rate(clk);
/* Peripheral Cluster #6 */
-static DEFINE_PRCC_CLK(6, mtu1_v1, 8, -1, NULL);
-static DEFINE_PRCC_CLK(6, mtu0_v1, 7, -1, NULL);
+/* MTU ID in data */
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu1_v1, 8, -1, NULL, clk_mtu_get_rate, 1);
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu0_v1, 7, -1, NULL, clk_mtu_get_rate, 0);
static DEFINE_PRCC_CLK(6, cfgreg_v1, 6, 6, NULL);
static DEFINE_PRCC_CLK(6, dmc_ed, 6, 6, NULL);
static DEFINE_PRCC_CLK(6, hash1, 5, -1, NULL);
/* Peripheral Cluster #7 */
static DEFINE_PRCC_CLK(7, tzpc0_ed, 4, -1, NULL);
-static DEFINE_PRCC_CLK(7, mtu1_ed, 3, -1, NULL);
-static DEFINE_PRCC_CLK(7, mtu0_ed, 2, -1, NULL);
+/* MTU ID in data */
+static DEFINE_PRCC_CLK_CUSTOM(7, mtu1_ed, 3, -1, NULL, clk_mtu_get_rate, 1);
+static DEFINE_PRCC_CLK_CUSTOM(7, mtu0_ed, 2, -1, NULL, clk_mtu_get_rate, 0);
static DEFINE_PRCC_CLK(7, wdg_ed, 1, -1, NULL);
static DEFINE_PRCC_CLK(7, cfgreg_ed, 0, -1, NULL);
CLK(uiccclk, "uicc", NULL),
};
-static int __init clk_init(void)
+int __init clk_init(void)
{
if (cpu_is_u8500ed()) {
clk_prcmu_ops.enable = clk_prcmu_ed_enable;
clk_prcmu_ops.disable = clk_prcmu_ed_disable;
+ clk_per6clk.rate = 100000000;
} else if (cpu_is_u5500()) {
/* Clock tree for U5500 not implemented yet */
clk_prcc_ops.enable = clk_prcc_ops.disable = NULL;
clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL;
+ clk_per6clk.rate = 26000000;
}
clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
return 0;
}
-arch_initcall(clk_init);
* @ops: pointer to clkops struct used to control this clock
* @name: name, for debugging
* @enabled: refcount. positive if enabled, zero if disabled
+ * @get_rate: custom callback for getting the clock rate
+ * @data: custom per-clock data for example for the get_rate
+ * callback
* @rate: fixed rate for clocks which don't implement
* ops->getrate
* @prcmu_cg_off: address offset of the combined enable/disable register
const struct clkops *ops;
const char *name;
unsigned int enabled;
+ unsigned long (*get_rate)(struct clk *);
+ void *data;
unsigned long rate;
struct list_head list;
.parent_periph = _kernclk \
}
+#define DEFINE_PRCC_CLK_CUSTOM(_pclust, _name, _bus_en, _kernel_en, _kernclk, _callback, _data) \
+struct clk clk_##_name = { \
+ .name = #_name, \
+ .ops = &clk_prcc_ops, \
+ .cluster = _pclust, \
+ .prcc_bus = _bus_en, \
+ .prcc_kernel = _kernel_en, \
+ .parent_cluster = &clk_per##_pclust##clk, \
+ .parent_periph = _kernclk, \
+ .get_rate = _callback, \
+ .data = (void *) _data \
+ }
+
+
#define CLK(_clk, _devname, _conname) \
{ \
.clk = &clk_##_clk, \
.dev_id = _devname, \
.con_id = _conname, \
}
+
+int __init clk_db8500_ed_fixup(void);
+int __init clk_init(void);
{
gic_dist_init(0, __io_address(UX500_GIC_DIST_BASE), 29);
gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE));
+
+ /*
+ * Init clocks here so that they are available for system timer
+ * initialization.
+ */
+ clk_init();
}
#ifdef CONFIG_CACHE_L2X0
if (addr < TASK_SIZE)
return do_page_fault(addr, fsr, regs);
+ if (user_mode(regs))
+ goto bad_area;
+
index = pgd_index(addr);
/*
debug_kmap_atomic(type);
- kmap = kmap_high_get(page);
+#ifdef CONFIG_DEBUG_HIGHMEM
+ /*
+ * There is no cache coherency issue when non VIVT, so force the
+ * dedicated kmap usage for better debugging purposes in that case.
+ */
+ if (!cache_is_vivt())
+ kmap = NULL;
+ else
+#endif
+ kmap = kmap_high_get(page);
if (kmap)
return kmap;
void free_initmem(void)
{
#ifdef CONFIG_HAVE_TCM
- extern char *__tcm_start, *__tcm_end;
+ extern char __tcm_start, __tcm_end;
- totalram_pages += free_area(__phys_to_pfn(__pa(__tcm_start)),
- __phys_to_pfn(__pa(__tcm_end)),
+ totalram_pages += free_area(__phys_to_pfn(__pa(&__tcm_start)),
+ __phys_to_pfn(__pa(&__tcm_end)),
"TCM link");
#endif
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/clockchips.h>
+#include <linux/clk.h>
#include <linux/jiffies.h>
+#include <linux/err.h>
#include <asm/mach/time.h>
#include <plat/mtu.h>
void __init nmdk_timer_init(void)
{
unsigned long rate;
- u32 cr = MTU_CRn_32BITS;;
+ struct clk *clk0;
+ struct clk *clk1;
+ u32 cr;
+
+ clk0 = clk_get_sys("mtu0", NULL);
+ BUG_ON(IS_ERR(clk0));
+
+ clk1 = clk_get_sys("mtu1", NULL);
+ BUG_ON(IS_ERR(clk1));
+
+ clk_enable(clk0);
+ clk_enable(clk1);
/*
* Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
* use a divide-by-16 counter if it's more than 16MHz
*/
- rate = CLOCK_TICK_RATE;
+ cr = MTU_CRn_32BITS;;
+ rate = clk_get_rate(clk0);
if (rate > 16 << 20) {
rate /= 16;
cr |= MTU_CRn_PRESCALE_16;
nmdk_clksrc.name);
/* Timer 1 is used for events, fix according to rate */
+ cr = MTU_CRn_32BITS;
+ rate = clk_get_rate(clk1);
+ if (rate > 16 << 20) {
+ rate /= 16;
+ cr |= MTU_CRn_PRESCALE_16;
+ } else {
+ cr |= MTU_CRn_PRESCALE_1;
+ }
writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
nmdk_clkevt.max_delta_ns =
#ifdef CONFIG_VFPv3
@ d16 - d31 registers
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1: mcrr p11, 3, r1, r2, c\dr @ fmdrr r1, r2, d\dr
+1: mcrr p11, 3, r0, r1, c\dr @ fmdrr r0, r1, d\dr
mov pc, lr
.org 1b + 8
.endr
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff