fec: fix uninitialized rx buffer usage
authorRob Herring <r.herring@freescale.com>
Fri, 5 Feb 2010 08:56:20 +0000 (08:56 +0000)
committerDavid S. Miller <davem@davemloft.net>
Wed, 10 Feb 2010 21:05:42 +0000 (13:05 -0800)
The fec driver was enabling receive buffer descriptor without allocating
the buffers. Make sure the buffer descriptors are initialized to not
start receiving packets.

Open also calls fec_restart after the rx buffers are allocated. With the code
in fec_restart, it zeroes out the buffer descriptors that have just been
setup.

Signed-off-by: Rob Herring <r.herring@freescale.com>
Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/fec.c

index 16a1d58..9a8743d 100644 (file)
@@ -1658,6 +1658,7 @@ static int fec_enet_init(struct net_device *dev, int index)
 {
        struct fec_enet_private *fep = netdev_priv(dev);
        struct bufdesc *cbd_base;
+       struct bufdesc *bdp;
        int i;
 
        /* Allocate memory for buffer descriptors. */
@@ -1710,6 +1711,34 @@ static int fec_enet_init(struct net_device *dev, int index)
        /* Set MII speed to 2.5 MHz */
        fep->phy_speed = ((((clk_get_rate(fep->clk) / 2 + 4999999)
                                        / 2500000) / 2) & 0x3F) << 1;
+
+       /* Initialize the receive buffer descriptors. */
+       bdp = fep->rx_bd_base;
+       for (i = 0; i < RX_RING_SIZE; i++) {
+
+               /* Initialize the BD for every fragment in the page. */
+               bdp->cbd_sc = 0;
+               bdp++;
+       }
+
+       /* Set the last buffer to wrap */
+       bdp--;
+       bdp->cbd_sc |= BD_SC_WRAP;
+
+       /* ...and the same for transmit */
+       bdp = fep->tx_bd_base;
+       for (i = 0; i < TX_RING_SIZE; i++) {
+
+               /* Initialize the BD for every fragment in the page. */
+               bdp->cbd_sc = 0;
+               bdp->cbd_bufaddr = 0;
+               bdp++;
+       }
+
+       /* Set the last buffer to wrap */
+       bdp--;
+       bdp->cbd_sc |= BD_SC_WRAP;
+
        fec_restart(dev, 0);
 
        /* Queue up command to detect the PHY and initialize the
@@ -1730,7 +1759,6 @@ static void
 fec_restart(struct net_device *dev, int duplex)
 {
        struct fec_enet_private *fep = netdev_priv(dev);
-       struct bufdesc *bdp;
        int i;
 
        /* Whack a reset.  We should wait for this. */
@@ -1768,33 +1796,6 @@ fec_restart(struct net_device *dev, int duplex)
                }
        }
 
-       /* Initialize the receive buffer descriptors. */
-       bdp = fep->rx_bd_base;
-       for (i = 0; i < RX_RING_SIZE; i++) {
-
-               /* Initialize the BD for every fragment in the page. */
-               bdp->cbd_sc = BD_ENET_RX_EMPTY;
-               bdp++;
-       }
-
-       /* Set the last buffer to wrap */
-       bdp--;
-       bdp->cbd_sc |= BD_SC_WRAP;
-
-       /* ...and the same for transmit */
-       bdp = fep->tx_bd_base;
-       for (i = 0; i < TX_RING_SIZE; i++) {
-
-               /* Initialize the BD for every fragment in the page. */
-               bdp->cbd_sc = 0;
-               bdp->cbd_bufaddr = 0;
-               bdp++;
-       }
-
-       /* Set the last buffer to wrap */
-       bdp--;
-       bdp->cbd_sc |= BD_SC_WRAP;
-
        /* Enable MII mode */
        if (duplex) {
                /* MII enable / FD enable */