powerpc/8xx: Use SPRG2 and DAR registers to stash r11 and cr.

This avoids storing these registers in memory.
CPU6 errata will still use the old way.
Remove some G2 leftover accesses from 2.4

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 6478a96..1f1a04b 100644 (file)
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -71,9 +71,6 @@ _ENTRY(_start);
  * in the first level table, but that would require many changes to the
  * Linux page directory/table functions that I don't want to do right now.
  *
- * I used to use SPRG2 for a temporary register in the TLB handler, but it
- * has since been put to other uses.  I now use a hack to save a register
- * and the CCR at memory location 0.....Someday I'll fix this.....
  *     -- Dan
  */
        .globl  __start
@@ -302,8 +299,13 @@ InstructionTLBMiss:
        DO_8xx_CPU6(0x3f80, r3)
        mtspr   SPRN_M_TW, r10  /* Save a couple of working registers */
        mfcr    r10
+#ifdef CONFIG_8xx_CPU6
        stw     r10, 0(r0)
        stw     r11, 4(r0)
+#else
+       mtspr   SPRN_DAR, r10
+       mtspr   SPRN_SPRG2, r11
+#endif
        mfspr   r10, SPRN_SRR0  /* Get effective address of fault */
 #ifdef CONFIG_8xx_CPU15
        addi    r11, r10, 0x1000
@@ -359,13 +361,19 @@ InstructionTLBMiss:
        DO_8xx_CPU6(0x2d80, r3)
        mtspr   SPRN_MI_RPN, r10        /* Update TLB entry */
 
-       mfspr   r10, SPRN_M_TW  /* Restore registers */
+       /* Restore registers */
+#ifndef CONFIG_8xx_CPU6
+       mfspr   r10, SPRN_DAR
+       mtcr    r10
+       mtspr   SPRN_DAR, r11   /* Tag DAR */
+       mfspr   r11, SPRN_SPRG2
+#else
        lwz     r11, 0(r0)
        mtcr    r11
        lwz     r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
        lwz     r3, 8(r0)
 #endif
+       mfspr   r10, SPRN_M_TW
        rfi
 2:
        mfspr   r11, SPRN_SRR1
@@ -375,13 +383,20 @@ InstructionTLBMiss:
        rlwinm  r11, r11, 0, 0xffff
        mtspr   SPRN_SRR1, r11
 
-       mfspr   r10, SPRN_M_TW  /* Restore registers */
+       /* Restore registers */
+#ifndef CONFIG_8xx_CPU6
+       mfspr   r10, SPRN_DAR
+       mtcr    r10
+       li      r11, 0x00f0
+       mtspr   SPRN_DAR, r11   /* Tag DAR */
+       mfspr   r11, SPRN_SPRG2
+#else
        lwz     r11, 0(r0)
        mtcr    r11
        lwz     r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
        lwz     r3, 8(r0)
 #endif
+       mfspr   r10, SPRN_M_TW
        b       InstructionAccess
 
        . = 0x1200
@@ -392,8 +407,13 @@ DataStoreTLBMiss:
        DO_8xx_CPU6(0x3f80, r3)
        mtspr   SPRN_M_TW, r10  /* Save a couple of working registers */
        mfcr    r10
+#ifdef CONFIG_8xx_CPU6
        stw     r10, 0(r0)
        stw     r11, 4(r0)
+#else
+       mtspr   SPRN_DAR, r10
+       mtspr   SPRN_SPRG2, r11
+#endif
        mfspr   r10, SPRN_M_TWB /* Get level 1 table entry address */
 
        /* If we are faulting a kernel address, we have to use the
@@ -461,18 +481,24 @@ DataStoreTLBMiss:
         * of the MMU.
         */
 2:     li      r11, 0x00f0
-       mtspr   SPRN_DAR,r11    /* Tag DAR */
        rlwimi  r10, r11, 0, 24, 28     /* Set 24-27, clear 28 */
        DO_8xx_CPU6(0x3d80, r3)
        mtspr   SPRN_MD_RPN, r10        /* Update TLB entry */
 
-       mfspr   r10, SPRN_M_TW  /* Restore registers */
+       /* Restore registers */
+#ifndef CONFIG_8xx_CPU6
+       mfspr   r10, SPRN_DAR
+       mtcr    r10
+       mtspr   SPRN_DAR, r11   /* Tag DAR */
+       mfspr   r11, SPRN_SPRG2
+#else
+       mtspr   SPRN_DAR, r11   /* Tag DAR */
        lwz     r11, 0(r0)
        mtcr    r11
        lwz     r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
        lwz     r3, 8(r0)
 #endif
+       mfspr   r10, SPRN_M_TW
        rfi
 
 /* This is an instruction TLB error on the MPC8xx.  This could be due
@@ -684,9 +710,6 @@ start_here:
        tophys(r4,r2)
        addi    r4,r4,THREAD    /* init task's THREAD */
        mtspr   SPRN_SPRG_THREAD,r4
-       li      r3,0
-       /* XXX What is that for ? SPRG2 appears otherwise unused on 8xx */
-       mtspr   SPRN_SPRG2,r3   /* 0 => r1 has kernel sp */
 
        /* stack */
        lis     r1,init_thread_union@ha