#include <linux/moduleparam.h>
#include <linux/mutex.h>
#include <linux/usb/audio.h>
+#include <linux/usb/ch9.h>
#include <sound/core.h>
#include <sound/info.h>
if (subs->transfer_done >= runtime->period_size) {
subs->transfer_done -= runtime->period_size;
period_elapsed = 1;
- if (subs->fmt_type == USB_FORMAT_TYPE_II) {
+ if (subs->fmt_type == UAC_FORMAT_TYPE_II) {
if (subs->transfer_done > 0) {
/* FIXME: fill-max mode is not
* supported yet */
u->packets = (i + 1) * total_packs / subs->nurbs
- i * total_packs / subs->nurbs;
u->buffer_size = maxsize * u->packets;
- if (subs->fmt_type == USB_FORMAT_TYPE_II)
+ if (subs->fmt_type == UAC_FORMAT_TYPE_II)
u->packets++; /* for transfer delimiter */
u->urb = usb_alloc_urb(u->packets, GFP_KERNEL);
if (!u->urb)
if (i >= fp->nr_rates)
continue;
}
- attr = fp->ep_attr & EP_ATTR_MASK;
+ attr = fp->ep_attr & USB_ENDPOINT_SYNCTYPE;
if (! found) {
found = fp;
cur_attr = attr;
* M-audio audiophile USB.
*/
if (attr != cur_attr) {
- if ((attr == EP_ATTR_ASYNC &&
+ if ((attr == USB_ENDPOINT_SYNC_ASYNC &&
subs->direction == SNDRV_PCM_STREAM_PLAYBACK) ||
- (attr == EP_ATTR_ADAPTIVE &&
+ (attr == USB_ENDPOINT_SYNC_ADAPTIVE &&
subs->direction == SNDRV_PCM_STREAM_CAPTURE))
continue;
- if ((cur_attr == EP_ATTR_ASYNC &&
+ if ((cur_attr == USB_ENDPOINT_SYNC_ASYNC &&
subs->direction == SNDRV_PCM_STREAM_PLAYBACK) ||
- (cur_attr == EP_ATTR_ADAPTIVE &&
+ (cur_attr == USB_ENDPOINT_SYNC_ADAPTIVE &&
subs->direction == SNDRV_PCM_STREAM_CAPTURE)) {
found = fp;
cur_attr = attr;
ep = get_endpoint(alts, 0)->bEndpointAddress;
/* if endpoint has pitch control, enable it */
- if (fmt->attributes & EP_CS_ATTR_PITCH_CONTROL) {
+ if (fmt->attributes & UAC_EP_CS_ATTR_PITCH_CONTROL) {
data[0] = 1;
- if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), SET_CUR,
+ if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_OUT,
- PITCH_CONTROL << 8, ep, data, 1, 1000)) < 0) {
+ UAC_EP_CS_ATTR_PITCH_CONTROL << 8, ep, data, 1, 1000)) < 0) {
snd_printk(KERN_ERR "%d:%d:%d: cannot set enable PITCH\n",
dev->devnum, iface, ep);
return err;
ep = get_endpoint(alts, 0)->bEndpointAddress;
/* if endpoint has sampling rate control, set it */
- if (fmt->attributes & EP_CS_ATTR_SAMPLE_RATE) {
+ if (fmt->attributes & UAC_EP_CS_ATTR_SAMPLE_RATE) {
int crate;
data[0] = rate;
data[1] = rate >> 8;
data[2] = rate >> 16;
- if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), SET_CUR,
+ if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_OUT,
- SAMPLING_FREQ_CONTROL << 8, ep, data, 3, 1000)) < 0) {
+ UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep, data, 3, 1000)) < 0) {
snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d to ep %#x\n",
dev->devnum, iface, fmt->altsetting, rate, ep);
return err;
}
- if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), GET_CUR,
+ if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC_GET_CUR,
USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_IN,
- SAMPLING_FREQ_CONTROL << 8, ep, data, 3, 1000)) < 0) {
+ UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep, data, 3, 1000)) < 0) {
snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq at ep %#x\n",
dev->devnum, iface, fmt->altsetting, ep);
return 0; /* some devices don't support reading */
* descriptors which fool us. if it has only one EP,
* assume it as adaptive-out or sync-in.
*/
- attr = fmt->ep_attr & EP_ATTR_MASK;
- if (((is_playback && attr == EP_ATTR_ASYNC) ||
- (! is_playback && attr == EP_ATTR_ADAPTIVE)) &&
+ attr = fmt->ep_attr & USB_ENDPOINT_SYNCTYPE;
+ if (((is_playback && attr == USB_ENDPOINT_SYNC_ASYNC) ||
+ (! is_playback && attr == USB_ENDPOINT_SYNC_ADAPTIVE)) &&
altsd->bNumEndpoints >= 2) {
/* check sync-pipe endpoint */
/* ... and check descriptor size before accessing bSynchAddress
}
/* always fill max packet size */
- if (fmt->attributes & EP_CS_ATTR_FILL_MAX)
+ if (fmt->attributes & UAC_EP_CS_ATTR_FILL_MAX)
subs->fill_max = 1;
if ((err = init_usb_pitch(dev, subs->interface, alts, fmt)) < 0)
runtime->hw.channels_min = fp->channels;
if (runtime->hw.channels_max < fp->channels)
runtime->hw.channels_max = fp->channels;
- if (fp->fmt_type == USB_FORMAT_TYPE_II && fp->frame_size > 0) {
+ if (fp->fmt_type == UAC_FORMAT_TYPE_II && fp->frame_size > 0) {
/* FIXME: there might be more than one audio formats... */
runtime->hw.period_bytes_min = runtime->hw.period_bytes_max =
fp->frame_size;
#include "usbquirks.h"
{ .match_flags = (USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS),
.bInterfaceClass = USB_CLASS_AUDIO,
- .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL },
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL },
{ } /* Terminating entry */
};
snd_iprintf(buffer, " Endpoint: %d %s (%s)\n",
fp->endpoint & USB_ENDPOINT_NUMBER_MASK,
fp->endpoint & USB_DIR_IN ? "IN" : "OUT",
- sync_types[(fp->ep_attr & EP_ATTR_MASK) >> 2]);
+ sync_types[(fp->ep_attr & USB_ENDPOINT_SYNCTYPE) >> 2]);
if (fp->rates & SNDRV_PCM_RATE_CONTINUOUS) {
snd_iprintf(buffer, " Rates: %d - %d (continuous)\n",
fp->rate_min, fp->rate_max);
pcm_format = -1;
switch (format) {
- case 0: /* some devices don't define this correctly... */
+ case UAC_FORMAT_TYPE_I_UNDEFINED: /* some devices don't define this correctly... */
snd_printdd(KERN_INFO "%d:%u:%d : format type 0 is detected, processed as PCM\n",
chip->dev->devnum, fp->iface, fp->altsetting);
/* fall-through */
- case USB_AUDIO_FORMAT_PCM:
+ case UAC_FORMAT_TYPE_I_PCM:
if (sample_width > sample_bytes * 8) {
snd_printk(KERN_INFO "%d:%u:%d : sample bitwidth %d in over sample bytes %d\n",
chip->dev->devnum, fp->iface, fp->altsetting,
break;
}
break;
- case USB_AUDIO_FORMAT_PCM8:
+ case UAC_FORMAT_TYPE_I_PCM8:
pcm_format = SNDRV_PCM_FORMAT_U8;
/* Dallas DS4201 workaround: it advertises U8 format, but really
if (chip->usb_id == USB_ID(0x04fa, 0x4201))
pcm_format = SNDRV_PCM_FORMAT_S8;
break;
- case USB_AUDIO_FORMAT_IEEE_FLOAT:
+ case UAC_FORMAT_TYPE_I_IEEE_FLOAT:
pcm_format = SNDRV_PCM_FORMAT_FLOAT_LE;
break;
- case USB_AUDIO_FORMAT_ALAW:
+ case UAC_FORMAT_TYPE_I_ALAW:
pcm_format = SNDRV_PCM_FORMAT_A_LAW;
break;
- case USB_AUDIO_FORMAT_MU_LAW:
+ case UAC_FORMAT_TYPE_I_MULAW:
pcm_format = SNDRV_PCM_FORMAT_MU_LAW;
break;
default:
int nr_rates = fmt[offset];
if (fmt[0] < offset + 1 + 3 * (nr_rates ? nr_rates : 2)) {
- snd_printk(KERN_ERR "%d:%u:%d : invalid FORMAT_TYPE desc\n",
+ snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_FORMAT_TYPE desc\n",
chip->dev->devnum, fp->iface, fp->altsetting);
return -1;
}
int i, nr_rates, data_size, ret = 0;
/* get the number of sample rates first by only fetching 2 bytes */
- ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), CS_RANGE,
+ ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
0x0100, chip->clock_id << 8, tmp, sizeof(tmp), 1000);
}
/* now get the full information */
- ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), CS_RANGE,
+ ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
0x0100, chip->clock_id << 8, data, data_size, 1000);
int protocol = altsd->bInterfaceProtocol;
int pcm_format, ret;
- if (fmt->bFormatType == USB_FORMAT_TYPE_III) {
+ if (fmt->bFormatType == UAC_FORMAT_TYPE_III) {
/* FIXME: the format type is really IECxxx
* but we give normal PCM format to get the existing
* apps working...
int protocol = altsd->bInterfaceProtocol;
switch (format) {
- case USB_AUDIO_FORMAT_AC3:
+ case UAC_FORMAT_TYPE_II_AC3:
/* FIXME: there is no AC3 format defined yet */
// fp->format = SNDRV_PCM_FORMAT_AC3;
fp->format = SNDRV_PCM_FORMAT_U8; /* temporarily hack to receive byte streams */
break;
- case USB_AUDIO_FORMAT_MPEG:
+ case UAC_FORMAT_TYPE_II_MPEG:
fp->format = SNDRV_PCM_FORMAT_MPEG;
break;
default:
int err;
switch (fmt[3]) {
- case USB_FORMAT_TYPE_I:
- case USB_FORMAT_TYPE_III:
+ case UAC_FORMAT_TYPE_I:
+ case UAC_FORMAT_TYPE_III:
err = parse_audio_format_i(chip, fp, format, fmt, iface);
break;
- case USB_FORMAT_TYPE_II:
+ case UAC_FORMAT_TYPE_II:
err = parse_audio_format_ii(chip, fp, format, fmt, iface);
break;
default:
if (chip->usb_id == USB_ID(0x041e, 0x3000) ||
chip->usb_id == USB_ID(0x041e, 0x3020) ||
chip->usb_id == USB_ID(0x041e, 0x3061)) {
- if (fmt[3] == USB_FORMAT_TYPE_I &&
+ if (fmt[3] == UAC_FORMAT_TYPE_I &&
fp->rates != SNDRV_PCM_RATE_48000 &&
fp->rates != SNDRV_PCM_RATE_96000)
return -1;
/* skip invalid one */
if ((altsd->bInterfaceClass != USB_CLASS_AUDIO &&
altsd->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
- (altsd->bInterfaceSubClass != USB_SUBCLASS_AUDIO_STREAMING &&
+ (altsd->bInterfaceSubClass != USB_SUBCLASS_AUDIOSTREAMING &&
altsd->bInterfaceSubClass != USB_SUBCLASS_VENDOR_SPEC) ||
altsd->bNumEndpoints < 1 ||
le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) == 0)
switch (protocol) {
case UAC_VERSION_1: {
struct uac_as_header_descriptor_v1 *as =
- snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, AS_GENERAL);
+ snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
if (!as) {
- snd_printk(KERN_ERR "%d:%u:%d : AS_GENERAL descriptor not found\n",
+ snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n",
dev->devnum, iface_no, altno);
continue;
}
if (as->bLength < sizeof(*as)) {
- snd_printk(KERN_ERR "%d:%u:%d : invalid AS_GENERAL desc\n",
+ snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n",
dev->devnum, iface_no, altno);
continue;
}
case UAC_VERSION_2: {
struct uac_as_header_descriptor_v2 *as =
- snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, AS_GENERAL);
+ snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
if (!as) {
- snd_printk(KERN_ERR "%d:%u:%d : AS_GENERAL descriptor not found\n",
+ snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n",
dev->devnum, iface_no, altno);
continue;
}
if (as->bLength < sizeof(*as)) {
- snd_printk(KERN_ERR "%d:%u:%d : invalid AS_GENERAL desc\n",
+ snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n",
dev->devnum, iface_no, altno);
continue;
}
}
/* get format type */
- fmt = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, FORMAT_TYPE);
+ fmt = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_FORMAT_TYPE);
if (!fmt) {
- snd_printk(KERN_ERR "%d:%u:%d : no FORMAT_TYPE desc\n",
+ snd_printk(KERN_ERR "%d:%u:%d : no UAC_FORMAT_TYPE desc\n",
dev->devnum, iface_no, altno);
continue;
}
if (((protocol == UAC_VERSION_1) && (fmt[0] < 8)) ||
((protocol == UAC_VERSION_2) && (fmt[0] != 6))) {
- snd_printk(KERN_ERR "%d:%u:%d : invalid FORMAT_TYPE desc\n",
+ snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_FORMAT_TYPE desc\n",
dev->devnum, iface_no, altno);
continue;
}
/* Creamware Noah has this descriptor after the 2nd endpoint */
if (!csep && altsd->bNumEndpoints >= 2)
csep = snd_usb_find_desc(alts->endpoint[1].extra, alts->endpoint[1].extralen, NULL, USB_DT_CS_ENDPOINT);
- if (!csep || csep[0] < 7 || csep[2] != EP_GENERAL) {
+ if (!csep || csep[0] < 7 || csep[2] != UAC_EP_GENERAL) {
snd_printk(KERN_WARNING "%d:%u:%d : no or invalid"
" class specific endpoint descriptor\n",
dev->devnum, iface_no, altno);
/* Optoplay sets the sample rate attribute although
* it seems not supporting it in fact.
*/
- fp->attributes &= ~EP_CS_ATTR_SAMPLE_RATE;
+ fp->attributes &= ~UAC_EP_CS_ATTR_SAMPLE_RATE;
break;
case USB_ID(0x041e, 0x3020): /* Creative SB Audigy 2 NX */
case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */
/* doesn't set the sample rate attribute, but supports it */
- fp->attributes |= EP_CS_ATTR_SAMPLE_RATE;
+ fp->attributes |= UAC_EP_CS_ATTR_SAMPLE_RATE;
break;
case USB_ID(0x047f, 0x0ca1): /* plantronics headset */
case USB_ID(0x077d, 0x07af): /* Griffin iMic (note that there is
* plantronics headset and Griffin iMic have set adaptive-in
* although it's really not...
*/
- fp->ep_attr &= ~EP_ATTR_MASK;
+ fp->ep_attr &= ~USB_ENDPOINT_SYNCTYPE;
if (stream == SNDRV_PCM_STREAM_PLAYBACK)
- fp->ep_attr |= EP_ATTR_ADAPTIVE;
+ fp->ep_attr |= USB_ENDPOINT_SYNC_ADAPTIVE;
else
- fp->ep_attr |= EP_ATTR_SYNC;
+ fp->ep_attr |= USB_ENDPOINT_SYNC_SYNC;
break;
}
altsd = get_iface_desc(alts);
if ((altsd->bInterfaceClass == USB_CLASS_AUDIO ||
altsd->bInterfaceClass == USB_CLASS_VENDOR_SPEC) &&
- altsd->bInterfaceSubClass == USB_SUBCLASS_MIDI_STREAMING) {
+ altsd->bInterfaceSubClass == USB_SUBCLASS_MIDISTREAMING) {
int err = snd_usbmidi_create(chip->card, iface,
&chip->midi_list, NULL);
if (err < 0) {
if ((altsd->bInterfaceClass != USB_CLASS_AUDIO &&
altsd->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
- altsd->bInterfaceSubClass != USB_SUBCLASS_AUDIO_STREAMING) {
+ altsd->bInterfaceSubClass != USB_SUBCLASS_AUDIOSTREAMING) {
snd_printdd(KERN_ERR "%d:%u:%d: skipping non-supported interface %d\n",
dev->devnum, ctrlif, interface, altsd->bInterfaceClass);
/* skip non-supported classes */
host_iface = &usb_ifnum_to_if(dev, ctrlif)->altsetting[0];
control_header = snd_usb_find_csint_desc(host_iface->extra,
host_iface->extralen,
- NULL, HEADER);
+ NULL, UAC_HEADER);
altsd = get_iface_desc(host_iface);
protocol = altsd->bInterfaceProtocol;
if (!control_header) {
- snd_printk(KERN_ERR "cannot find HEADER\n");
+ snd_printk(KERN_ERR "cannot find UAC_HEADER\n");
return -EINVAL;
}
}
if (h1->bLength < sizeof(*h1) + h1->bInCollection) {
- snd_printk(KERN_ERR "invalid HEADER (v1)\n");
+ snd_printk(KERN_ERR "invalid UAC_HEADER (v1)\n");
return -EINVAL;
}
* clock selectors and sample rate conversion units. */
cs = snd_usb_find_csint_desc(host_iface->extra, host_iface->extralen,
- NULL, CLOCK_SOURCE);
+ NULL, UAC_CLOCK_SOURCE);
if (!cs) {
snd_printk(KERN_ERR "CLOCK_SOURCE descriptor not found\n");
static const struct audioformat ua_format = {
.format = SNDRV_PCM_FORMAT_S24_3LE,
.channels = 2,
- .fmt_type = USB_FORMAT_TYPE_I,
+ .fmt_type = UAC_FORMAT_TYPE_I,
.altsetting = 1,
.altset_idx = 1,
.rates = SNDRV_PCM_RATE_CONTINUOUS,
{
static const struct audioformat ua1000_format = {
.format = SNDRV_PCM_FORMAT_S32_LE,
- .fmt_type = USB_FORMAT_TYPE_I,
+ .fmt_type = UAC_FORMAT_TYPE_I,
.altsetting = 1,
.altset_idx = 1,
.attributes = 0,
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff