/*
* wm8993.c -- WM8993 ALSA SoC audio driver
*
- * Copyright 2009 Wolfson Microelectronics plc
+ * Copyright 2009, 2010 Wolfson Microelectronics plc
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
+#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include "wm8993.h"
#include "wm_hubs.h"
+#define WM8993_NUM_SUPPLIES 6
+static const char *wm8993_supply_names[WM8993_NUM_SUPPLIES] = {
+ "DCVDD",
+ "DBVDD",
+ "AVDD1",
+ "AVDD2",
+ "CPVDD",
+ "SPKVDD",
+};
+
static u16 wm8993_reg_defaults[WM8993_REGISTER_COUNT] = {
0x8993, /* R0 - Software Reset */
0x0000, /* R1 - Power Management (1) */
};
struct wm8993_priv {
+ struct wm_hubs_data hubs_data;
u16 reg_cache[WM8993_REGISTER_COUNT];
+ struct regulator_bulk_data supplies[WM8993_NUM_SUPPLIES];
struct wm8993_platform_data pdata;
struct snd_soc_codec codec;
int master;
int sysclk_source;
+ int tdm_slots;
+ int tdm_width;
unsigned int mclk_rate;
unsigned int sysclk_rate;
unsigned int fs;
int class_w_users;
unsigned int fll_fref;
unsigned int fll_fout;
+ int fll_src;
};
-static unsigned int wm8993_read_hw(struct snd_soc_codec *codec, u8 reg)
-{
- struct i2c_msg xfer[2];
- u16 data;
- int ret;
- struct i2c_client *i2c = codec->control_data;
-
- /* Write register */
- xfer[0].addr = i2c->addr;
- xfer[0].flags = 0;
- xfer[0].len = 1;
- xfer[0].buf = ®
-
- /* Read data */
- xfer[1].addr = i2c->addr;
- xfer[1].flags = I2C_M_RD;
- xfer[1].len = 2;
- xfer[1].buf = (u8 *)&data;
-
- ret = i2c_transfer(i2c->adapter, xfer, 2);
- if (ret != 2) {
- dev_err(codec->dev, "Failed to read 0x%x: %d\n", reg, ret);
- return 0;
- }
-
- return (data >> 8) | ((data & 0xff) << 8);
-}
-
static int wm8993_volatile(unsigned int reg)
{
switch (reg) {
}
}
-static unsigned int wm8993_read(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *reg_cache = codec->reg_cache;
-
- BUG_ON(reg > WM8993_MAX_REGISTER);
-
- if (wm8993_volatile(reg))
- return wm8993_read_hw(codec, reg);
- else
- return reg_cache[reg];
-}
-
-static int wm8993_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u16 *reg_cache = codec->reg_cache;
- u8 data[3];
- int ret;
-
- BUG_ON(reg > WM8993_MAX_REGISTER);
-
- /* data is
- * D15..D9 WM8993 register offset
- * D8...D0 register data
- */
- data[0] = reg;
- data[1] = value >> 8;
- data[2] = value & 0x00ff;
-
- if (!wm8993_volatile(reg))
- reg_cache[reg] = value;
-
- ret = codec->hw_write(codec->control_data, data, 3);
-
- if (ret == 3)
- return 0;
- if (ret < 0)
- return ret;
- return -EIO;
-}
-
struct _fll_div {
u16 fll_fratio;
u16 fll_outdiv;
return 0;
}
-static int wm8993_set_fll(struct snd_soc_dai *dai, int fll_id,
+static int wm8993_set_fll(struct snd_soc_dai *dai, int fll_id, int source,
unsigned int Fref, unsigned int Fout)
{
struct snd_soc_codec *codec = dai->codec;
- struct wm8993_priv *wm8993 = codec->private_data;
+ struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
u16 reg1, reg4, reg5;
struct _fll_div fll_div;
int ret;
wm8993->fll_fref = 0;
wm8993->fll_fout = 0;
- reg1 = wm8993_read(codec, WM8993_FLL_CONTROL_1);
+ reg1 = snd_soc_read(codec, WM8993_FLL_CONTROL_1);
reg1 &= ~WM8993_FLL_ENA;
- wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1);
+ snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
return 0;
}
if (ret != 0)
return ret;
- reg5 = wm8993_read(codec, WM8993_FLL_CONTROL_5);
+ reg5 = snd_soc_read(codec, WM8993_FLL_CONTROL_5);
reg5 &= ~WM8993_FLL_CLK_SRC_MASK;
switch (fll_id) {
/* Any FLL configuration change requires that the FLL be
* disabled first. */
- reg1 = wm8993_read(codec, WM8993_FLL_CONTROL_1);
+ reg1 = snd_soc_read(codec, WM8993_FLL_CONTROL_1);
reg1 &= ~WM8993_FLL_ENA;
- wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1);
+ snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
/* Apply the configuration */
if (fll_div.k)
reg1 |= WM8993_FLL_FRAC_MASK;
else
reg1 &= ~WM8993_FLL_FRAC_MASK;
- wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1);
+ snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
- wm8993_write(codec, WM8993_FLL_CONTROL_2,
- (fll_div.fll_outdiv << WM8993_FLL_OUTDIV_SHIFT) |
- (fll_div.fll_fratio << WM8993_FLL_FRATIO_SHIFT));
- wm8993_write(codec, WM8993_FLL_CONTROL_3, fll_div.k);
+ snd_soc_write(codec, WM8993_FLL_CONTROL_2,
+ (fll_div.fll_outdiv << WM8993_FLL_OUTDIV_SHIFT) |
+ (fll_div.fll_fratio << WM8993_FLL_FRATIO_SHIFT));
+ snd_soc_write(codec, WM8993_FLL_CONTROL_3, fll_div.k);
- reg4 = wm8993_read(codec, WM8993_FLL_CONTROL_4);
+ reg4 = snd_soc_read(codec, WM8993_FLL_CONTROL_4);
reg4 &= ~WM8993_FLL_N_MASK;
reg4 |= fll_div.n << WM8993_FLL_N_SHIFT;
- wm8993_write(codec, WM8993_FLL_CONTROL_4, reg4);
+ snd_soc_write(codec, WM8993_FLL_CONTROL_4, reg4);
reg5 &= ~WM8993_FLL_CLK_REF_DIV_MASK;
reg5 |= fll_div.fll_clk_ref_div << WM8993_FLL_CLK_REF_DIV_SHIFT;
- wm8993_write(codec, WM8993_FLL_CONTROL_5, reg5);
+ snd_soc_write(codec, WM8993_FLL_CONTROL_5, reg5);
/* Enable the FLL */
- wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA);
+ snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA);
dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
wm8993->fll_fref = Fref;
wm8993->fll_fout = Fout;
+ wm8993->fll_src = source;
return 0;
}
static int configure_clock(struct snd_soc_codec *codec)
{
- struct wm8993_priv *wm8993 = codec->private_data;
+ struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
unsigned int reg;
/* This should be done on init() for bypass paths */
case WM8993_SYSCLK_MCLK:
dev_dbg(codec->dev, "Using %dHz MCLK\n", wm8993->mclk_rate);
- reg = wm8993_read(codec, WM8993_CLOCKING_2);
- reg &= ~WM8993_SYSCLK_SRC;
+ reg = snd_soc_read(codec, WM8993_CLOCKING_2);
+ reg &= ~(WM8993_MCLK_DIV | WM8993_SYSCLK_SRC);
if (wm8993->mclk_rate > 13500000) {
reg |= WM8993_MCLK_DIV;
wm8993->sysclk_rate = wm8993->mclk_rate / 2;
reg &= ~WM8993_MCLK_DIV;
wm8993->sysclk_rate = wm8993->mclk_rate;
}
- reg &= ~WM8993_MCLK_DIV;
- reg &= ~(WM8993_MCLK_DIV | WM8993_SYSCLK_SRC);
- wm8993_write(codec, WM8993_CLOCKING_2, reg);
+ snd_soc_write(codec, WM8993_CLOCKING_2, reg);
break;
case WM8993_SYSCLK_FLL:
dev_dbg(codec->dev, "Using %dHz FLL clock\n",
wm8993->fll_fout);
- reg = wm8993_read(codec, WM8993_CLOCKING_2);
+ reg = snd_soc_read(codec, WM8993_CLOCKING_2);
reg |= WM8993_SYSCLK_SRC;
if (wm8993->fll_fout > 13500000) {
reg |= WM8993_MCLK_DIV;
reg &= ~WM8993_MCLK_DIV;
wm8993->sysclk_rate = wm8993->fll_fout;
}
- wm8993_write(codec, WM8993_CLOCKING_2, reg);
+ snd_soc_write(codec, WM8993_CLOCKING_2, reg);
break;
default:
SOC_SINGLE("DRC Switch", WM8993_DRC_CONTROL_1, 15, 1, 0),
SOC_ENUM("DRC Path", drc_path),
-SOC_SINGLE_TLV("DRC Compressor Threashold Volume", WM8993_DRC_CONTROL_2,
+SOC_SINGLE_TLV("DRC Compressor Threshold Volume", WM8993_DRC_CONTROL_2,
2, 60, 1, drc_comp_threash),
SOC_SINGLE_TLV("DRC Compressor Amplitude Volume", WM8993_DRC_CONTROL_3,
11, 30, 1, drc_comp_amp),
SOC_ENUM("DRC Quick Release Rate", drc_qr_rate),
SOC_SINGLE("DRC Smoothing Switch", WM8993_DRC_CONTROL_1, 11, 1, 0),
SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8993_DRC_CONTROL_1, 8, 1, 0),
-SOC_ENUM("DRC Smoothing Hysteresis Threashold", drc_smooth),
+SOC_ENUM("DRC Smoothing Hysteresis Threshold", drc_smooth),
SOC_SINGLE_TLV("DRC Startup Volume", WM8993_DRC_CONTROL_4, 8, 18, 0,
drc_startup_tlv),
{
struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
struct snd_soc_codec *codec = widget->codec;
- struct wm8993_priv *wm8993 = codec->private_data;
+ struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
int ret;
/* Turn it off if we're using the main output mixer */
{ "Right Headphone Mux", "DAC", "DACR" },
};
+static void wm8993_cache_restore(struct snd_soc_codec *codec)
+{
+ u16 *cache = codec->reg_cache;
+ int i;
+
+ if (!codec->cache_sync)
+ return;
+
+ /* Reenable hardware writes */
+ codec->cache_only = 0;
+
+ /* Restore the register settings */
+ for (i = 1; i < WM8993_MAX_REGISTER; i++) {
+ if (cache[i] == wm8993_reg_defaults[i])
+ continue;
+ snd_soc_write(codec, i, cache[i]);
+ }
+
+ /* We're in sync again */
+ codec->cache_sync = 0;
+}
+
static int wm8993_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- struct wm8993_priv *wm8993 = codec->private_data;
+ struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
+ int ret;
switch (level) {
case SND_SOC_BIAS_ON:
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ ret = regulator_bulk_enable(ARRAY_SIZE(wm8993->supplies),
+ wm8993->supplies);
+ if (ret != 0)
+ return ret;
+
+ wm8993_cache_restore(codec);
+
+ /* Tune DC servo configuration */
+ snd_soc_write(codec, 0x44, 3);
+ snd_soc_write(codec, 0x56, 3);
+ snd_soc_write(codec, 0x44, 0);
+
/* Bring up VMID with fast soft start */
snd_soc_update_bits(codec, WM8993_ANTIPOP2,
WM8993_STARTUP_BIAS_ENA |
snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
WM8993_VMID_SEL_MASK | WM8993_BIAS_ENA,
0);
+
+#ifdef CONFIG_REGULATOR
+ /* Post 2.6.34 we will be able to get a callback when
+ * the regulators are disabled which we can use but
+ * for now just assume that the power will be cut if
+ * the regulator API is in use.
+ */
+ codec->cache_sync = 1;
+#endif
+
+ regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies),
+ wm8993->supplies);
break;
}
int clk_id, unsigned int freq, int dir)
{
struct snd_soc_codec *codec = codec_dai->codec;
- struct wm8993_priv *wm8993 = codec->private_data;
+ struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
switch (clk_id) {
case WM8993_SYSCLK_MCLK:
unsigned int fmt)
{
struct snd_soc_codec *codec = dai->codec;
- struct wm8993_priv *wm8993 = codec->private_data;
- unsigned int aif1 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_1);
- unsigned int aif4 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_4);
+ struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
+ unsigned int aif1 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_1);
+ unsigned int aif4 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_4);
aif1 &= ~(WM8993_BCLK_DIR | WM8993_AIF_BCLK_INV |
WM8993_AIF_LRCLK_INV | WM8993_AIF_FMT_MASK);
return -EINVAL;
}
- wm8993_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
- wm8993_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
+ snd_soc_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
+ snd_soc_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
return 0;
}
struct snd_soc_dai *dai)
{
struct snd_soc_codec *codec = dai->codec;
- struct wm8993_priv *wm8993 = codec->private_data;
+ struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
int ret, i, best, best_val, cur_val;
unsigned int clocking1, clocking3, aif1, aif4;
- clocking1 = wm8993_read(codec, WM8993_CLOCKING_1);
+ clocking1 = snd_soc_read(codec, WM8993_CLOCKING_1);
clocking1 &= ~WM8993_BCLK_DIV_MASK;
- clocking3 = wm8993_read(codec, WM8993_CLOCKING_3);
+ clocking3 = snd_soc_read(codec, WM8993_CLOCKING_3);
clocking3 &= ~(WM8993_CLK_SYS_RATE_MASK | WM8993_SAMPLE_RATE_MASK);
- aif1 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_1);
+ aif1 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_1);
aif1 &= ~WM8993_AIF_WL_MASK;
- aif4 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_4);
+ aif4 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_4);
aif4 &= ~WM8993_LRCLK_RATE_MASK;
/* What BCLK do we need? */
wm8993->fs = params_rate(params);
wm8993->bclk = 2 * wm8993->fs;
- switch (params_format(params)) {
- case SNDRV_PCM_FORMAT_S16_LE:
- wm8993->bclk *= 16;
- break;
- case SNDRV_PCM_FORMAT_S20_3LE:
- wm8993->bclk *= 20;
- aif1 |= 0x8;
- break;
- case SNDRV_PCM_FORMAT_S24_LE:
- wm8993->bclk *= 24;
- aif1 |= 0x10;
- break;
- case SNDRV_PCM_FORMAT_S32_LE:
- wm8993->bclk *= 32;
- aif1 |= 0x18;
- break;
- default:
- return -EINVAL;
+ if (wm8993->tdm_slots) {
+ dev_dbg(codec->dev, "Configuring for %d %d bit TDM slots\n",
+ wm8993->tdm_slots, wm8993->tdm_width);
+ wm8993->bclk *= wm8993->tdm_width * wm8993->tdm_slots;
+ } else {
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ wm8993->bclk *= 16;
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ wm8993->bclk *= 20;
+ aif1 |= 0x8;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ wm8993->bclk *= 24;
+ aif1 |= 0x10;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ wm8993->bclk *= 32;
+ aif1 |= 0x18;
+ break;
+ default:
+ return -EINVAL;
+ }
}
dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm8993->bclk);
dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm8993->bclk / wm8993->fs);
aif4 |= wm8993->bclk / wm8993->fs;
- wm8993_write(codec, WM8993_CLOCKING_1, clocking1);
- wm8993_write(codec, WM8993_CLOCKING_3, clocking3);
- wm8993_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
- wm8993_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
+ snd_soc_write(codec, WM8993_CLOCKING_1, clocking1);
+ snd_soc_write(codec, WM8993_CLOCKING_3, clocking3);
+ snd_soc_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
+ snd_soc_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
/* ReTune Mobile? */
if (wm8993->pdata.num_retune_configs) {
- u16 eq1 = wm8993_read(codec, WM8993_EQ1);
+ u16 eq1 = snd_soc_read(codec, WM8993_EQ1);
struct wm8993_retune_mobile_setting *s;
best = 0;
snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, 0);
for (i = 1; i < ARRAY_SIZE(s->config); i++)
- wm8993_write(codec, WM8993_EQ1 + i, s->config[i]);
+ snd_soc_write(codec, WM8993_EQ1 + i, s->config[i]);
snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, eq1);
}
struct snd_soc_codec *codec = codec_dai->codec;
unsigned int reg;
- reg = wm8993_read(codec, WM8993_DAC_CTRL);
+ reg = snd_soc_read(codec, WM8993_DAC_CTRL);
if (mute)
reg |= WM8993_DAC_MUTE;
else
reg &= ~WM8993_DAC_MUTE;
- wm8993_write(codec, WM8993_DAC_CTRL, reg);
+ snd_soc_write(codec, WM8993_DAC_CTRL, reg);
+
+ return 0;
+}
+
+static int wm8993_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
+ unsigned int rx_mask, int slots, int slot_width)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
+ int aif1 = 0;
+ int aif2 = 0;
+
+ /* Don't need to validate anything if we're turning off TDM */
+ if (slots == 0) {
+ wm8993->tdm_slots = 0;
+ goto out;
+ }
+
+ /* Note that we allow configurations we can't handle ourselves -
+ * for example, we can generate clocks for slots 2 and up even if
+ * we can't use those slots ourselves.
+ */
+ aif1 |= WM8993_AIFADC_TDM;
+ aif2 |= WM8993_AIFDAC_TDM;
+
+ switch (rx_mask) {
+ case 3:
+ break;
+ case 0xc:
+ aif1 |= WM8993_AIFADC_TDM_CHAN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+
+ switch (tx_mask) {
+ case 3:
+ break;
+ case 0xc:
+ aif2 |= WM8993_AIFDAC_TDM_CHAN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+out:
+ wm8993->tdm_width = slot_width;
+ wm8993->tdm_slots = slots / 2;
+
+ snd_soc_update_bits(codec, WM8993_AUDIO_INTERFACE_1,
+ WM8993_AIFADC_TDM | WM8993_AIFADC_TDM_CHAN, aif1);
+ snd_soc_update_bits(codec, WM8993_AUDIO_INTERFACE_2,
+ WM8993_AIFDAC_TDM | WM8993_AIFDAC_TDM_CHAN, aif2);
return 0;
}
.hw_params = wm8993_hw_params,
.digital_mute = wm8993_digital_mute,
.set_pll = wm8993_set_fll,
+ .set_tdm_slot = wm8993_set_tdm_slot,
};
#define WM8993_RATES SNDRV_PCM_RATE_8000_48000
socdev->card->codec = wm8993_codec;
codec = wm8993_codec;
- wm8993 = codec->private_data;
+ wm8993 = snd_soc_codec_get_drvdata(codec);
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
if (ret < 0) {
wm_hubs_add_analogue_routes(codec, wm8993->pdata.lineout1_diff,
wm8993->pdata.lineout2_diff);
- snd_soc_dapm_new_widgets(codec);
-
- ret = snd_soc_init_card(socdev);
- if (ret < 0) {
- dev_err(codec->dev, "failed to register card\n");
- goto card_err;
- }
-
return ret;
-card_err:
- snd_soc_free_pcms(socdev);
- snd_soc_dapm_free(socdev);
err:
return ret;
}
return 0;
}
+#ifdef CONFIG_PM
+static int wm8993_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+ struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
+ int fll_fout = wm8993->fll_fout;
+ int fll_fref = wm8993->fll_fref;
+ int ret;
+
+ /* Stop the FLL in an orderly fashion */
+ ret = wm8993_set_fll(codec->dai, 0, 0, 0, 0);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to stop FLL\n");
+ return ret;
+ }
+
+ wm8993->fll_fout = fll_fout;
+ wm8993->fll_fref = fll_fref;
+
+ wm8993_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+ return 0;
+}
+
+static int wm8993_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+ struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
+ int ret;
+
+ wm8993_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ /* Restart the FLL? */
+ if (wm8993->fll_fout) {
+ int fll_fout = wm8993->fll_fout;
+ int fll_fref = wm8993->fll_fref;
+
+ wm8993->fll_fref = 0;
+ wm8993->fll_fout = 0;
+
+ ret = wm8993_set_fll(codec->dai, 0, wm8993->fll_src,
+ fll_fref, fll_fout);
+ if (ret != 0)
+ dev_err(codec->dev, "Failed to restart FLL\n");
+ }
+
+ return 0;
+}
+#else
+#define wm8993_suspend NULL
+#define wm8993_resume NULL
+#endif
+
struct snd_soc_codec_device soc_codec_dev_wm8993 = {
.probe = wm8993_probe,
.remove = wm8993_remove,
+ .suspend = wm8993_suspend,
+ .resume = wm8993_resume,
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8993);
struct snd_soc_codec *codec;
unsigned int val;
int ret;
+ int i;
if (wm8993_codec) {
dev_err(&i2c->dev, "A WM8993 is already registered\n");
INIT_LIST_HEAD(&codec->dapm_paths);
codec->name = "WM8993";
- codec->read = wm8993_read;
- codec->write = wm8993_write;
- codec->hw_write = (hw_write_t)i2c_master_send;
+ codec->volatile_register = wm8993_volatile;
codec->reg_cache = wm8993->reg_cache;
codec->reg_cache_size = ARRAY_SIZE(wm8993->reg_cache);
codec->bias_level = SND_SOC_BIAS_OFF;
codec->set_bias_level = wm8993_set_bias_level;
codec->dai = &wm8993_dai;
codec->num_dai = 1;
- codec->private_data = wm8993;
+ snd_soc_codec_set_drvdata(codec, wm8993);
+
+ wm8993->hubs_data.hp_startup_mode = 1;
+ wm8993->hubs_data.dcs_codes = -2;
memcpy(wm8993->reg_cache, wm8993_reg_defaults,
sizeof(wm8993->reg_cache));
+ ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
i2c_set_clientdata(i2c, wm8993);
codec->control_data = i2c;
wm8993_codec = codec;
codec->dev = &i2c->dev;
- val = wm8993_read_hw(codec, WM8993_SOFTWARE_RESET);
+ for (i = 0; i < ARRAY_SIZE(wm8993->supplies); i++)
+ wm8993->supplies[i].supply = wm8993_supply_names[i];
+
+ ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8993->supplies),
+ wm8993->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
+ goto err;
+ }
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(wm8993->supplies),
+ wm8993->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
+ goto err_get;
+ }
+
+ val = snd_soc_read(codec, WM8993_SOFTWARE_RESET);
if (val != wm8993_reg_defaults[WM8993_SOFTWARE_RESET]) {
dev_err(codec->dev, "Invalid ID register value %x\n", val);
ret = -EINVAL;
- goto err;
+ goto err_enable;
}
- ret = wm8993_write(codec, WM8993_SOFTWARE_RESET, 0xffff);
+ ret = snd_soc_write(codec, WM8993_SOFTWARE_RESET, 0xffff);
if (ret != 0)
- goto err;
+ goto err_enable;
+
+ codec->cache_only = 1;
/* By default we're using the output mixers */
wm8993->class_w_users = 2;
/* Use automatic clock configuration */
snd_soc_update_bits(codec, WM8993_CLOCKING_4, WM8993_SR_MODE, 0);
- if (!wm8993->pdata.lineout1_diff)
- snd_soc_update_bits(codec, WM8993_LINE_MIXER1,
- WM8993_LINEOUT1_MODE,
- WM8993_LINEOUT1_MODE);
- if (!wm8993->pdata.lineout2_diff)
- snd_soc_update_bits(codec, WM8993_LINE_MIXER2,
- WM8993_LINEOUT2_MODE,
- WM8993_LINEOUT2_MODE);
-
- if (wm8993->pdata.lineout1fb)
- snd_soc_update_bits(codec, WM8993_ADDITIONAL_CONTROL,
- WM8993_LINEOUT1_FB, WM8993_LINEOUT1_FB);
-
- if (wm8993->pdata.lineout2fb)
- snd_soc_update_bits(codec, WM8993_ADDITIONAL_CONTROL,
- WM8993_LINEOUT2_FB, WM8993_LINEOUT2_FB);
-
- /* Apply the microphone bias/detection configuration - the
- * platform data is directly applicable to the register. */
- snd_soc_update_bits(codec, WM8993_MICBIAS,
- WM8993_JD_SCTHR_MASK | WM8993_JD_THR_MASK |
- WM8993_MICB1_LVL | WM8993_MICB2_LVL,
- wm8993->pdata.jd_scthr << WM8993_JD_SCTHR_SHIFT |
- wm8993->pdata.jd_thr << WM8993_JD_THR_SHIFT |
- wm8993->pdata.micbias1_lvl |
- wm8993->pdata.micbias1_lvl << 1);
-
+ wm_hubs_handle_analogue_pdata(codec, wm8993->pdata.lineout1_diff,
+ wm8993->pdata.lineout2_diff,
+ wm8993->pdata.lineout1fb,
+ wm8993->pdata.lineout2fb,
+ wm8993->pdata.jd_scthr,
+ wm8993->pdata.jd_thr,
+ wm8993->pdata.micbias1_lvl,
+ wm8993->pdata.micbias2_lvl);
+
ret = wm8993_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
if (ret != 0)
- goto err;
+ goto err_enable;
wm8993_dai.dev = codec->dev;
err_bias:
wm8993_set_bias_level(codec, SND_SOC_BIAS_OFF);
+err_enable:
+ regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
+err_get:
+ regulator_bulk_free(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
err:
wm8993_codec = NULL;
kfree(wm8993);
snd_soc_unregister_dai(&wm8993_dai);
wm8993_set_bias_level(&wm8993->codec, SND_SOC_BIAS_OFF);
+ regulator_bulk_free(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
kfree(wm8993);
return 0;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff