# ALSA PCI drivers
-menu "PCI devices"
- depends on SND!=n && PCI
+menuconfig SND_PCI
+ bool "PCI sound devices"
+ depends on PCI
+ default y
+ help
+ Support for sound devices connected via the PCI bus.
-config SND_AC97_CODEC
- tristate
+if SND_PCI
+
+config SND_AD1889
+ tristate "Analog Devices AD1889"
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for the integrated AC97 sound
+ device found in particular on the Hewlett-Packard [BCJ]-xxx0
+ class PA-RISC workstations, using the AD1819 codec.
+
+ To compile this as a module, choose M here: the module
+ will be called snd-ad1889.
+
+config SND_ALS300
+ tristate "Avance Logic ALS300/ALS300+"
select SND_PCM
+ select SND_AC97_CODEC
+ select SND_OPL3_LIB
+ help
+ Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-als300
+
+config SND_ALS4000
+ tristate "Avance Logic ALS4000"
+ depends on ISA_DMA_API
+ select SND_OPL3_LIB
+ select SND_MPU401_UART
+ select SND_PCM
+ select SND_SB_COMMON
+ help
+ Say Y here to include support for soundcards based on Avance Logic
+ ALS4000 chips.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-als4000.
config SND_ALI5451
tristate "ALi M5451 PCI Audio Controller"
- depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
help
To compile this driver as a module, choose M here: the module
will be called snd-ali5451.
+config SND_ASIHPI
+ tristate "AudioScience ASIxxxx"
+ depends on X86
+ select FW_LOADER
+ select SND_PCM
+ select SND_HWDEP
+ help
+ Say Y here to include support for AudioScience ASI sound cards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-asihpi.
+
config SND_ATIIXP
tristate "ATI IXP AC97 Controller"
- depends on SND
select SND_AC97_CODEC
help
Say Y here to include support for the integrated AC97 sound
config SND_ATIIXP_MODEM
tristate "ATI IXP Modem"
- depends on SND
select SND_AC97_CODEC
help
Say Y here to include support for the integrated MC97 modem on
will be called snd-atiixp-modem.
config SND_AU8810
- tristate "Aureal Advantage"
- depends on SND
+ tristate "Aureal Advantage"
select SND_MPU401_UART
select SND_AC97_CODEC
- help
+ help
Say Y here to include support for Aureal Advantage soundcards.
Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
- 3D support code is in place, but not yet useable. For more info,
- email the ALSA developer list, or <mjander@users.sourceforge.net>.
+ 3D support code is in place, but not yet useable. For more info,
+ email the ALSA developer list, or <mjander@users.sourceforge.net>.
To compile this driver as a module, choose M here: the module
will be called snd-au8810.
-
+
config SND_AU8820
- tristate "Aureal Vortex"
- depends on SND
+ tristate "Aureal Vortex"
select SND_MPU401_UART
select SND_AC97_CODEC
- help
+ help
Say Y here to include support for Aureal Vortex soundcards.
- Supported features: Hardware Mixer and SRC. For more info, email
- the ALSA developer list, or <mjander@users.sourceforge.net>.
+ Supported features: Hardware Mixer and SRC. For more info, email
+ the ALSA developer list, or <mjander@users.sourceforge.net>.
To compile this driver as a module, choose M here: the module
will be called snd-au8820.
-
+
config SND_AU8830
- tristate "Aureal Vortex 2"
- depends on SND
+ tristate "Aureal Vortex 2"
select SND_MPU401_UART
select SND_AC97_CODEC
- help
+ help
Say Y here to include support for Aureal Vortex 2 soundcards.
- Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
- 3D support code is in place, but not yet useable. For more info,
- email the ALSA developer list, or <mjander@users.sourceforge.net>.
+ Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
+ 3D support code is in place, but not yet useable. For more info,
+ email the ALSA developer list, or <mjander@users.sourceforge.net>.
To compile this driver as a module, choose M here: the module
will be called snd-au8830.
-
+
+config SND_AW2
+ tristate "Emagic Audiowerk 2"
+ help
+ Say Y here to include support for Emagic Audiowerk 2 soundcards.
+
+ Supported features: Analog and SPDIF output. Analog or SPDIF input.
+ Note: Switch between analog and digital input does not always work.
+ It can produce continuous noise. The workaround is to switch again
+ (and again) between digital and analog input until it works.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-aw2.
+
+
config SND_AZT3328
- tristate "Aztech AZF3328 / PCI168 (EXPERIMENTAL)"
- depends on SND && EXPERIMENTAL
+ tristate "Aztech AZF3328 / PCI168"
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
+ select SND_RAWMIDI
help
Say Y here to include support for Aztech AZF3328 (PCI168)
soundcards.
will be called snd-azt3328.
config SND_BT87X
- tristate "Bt87x Audio Capture"
- depends on SND
+ tristate "Bt87x Audio Capture"
select SND_PCM
- help
+ help
If you want to record audio from TV cards based on
Brooktree Bt878/Bt879 chips, say Y here and read
<file:Documentation/sound/alsa/Bt87x.txt>.
Higher sample rates won't hurt your hardware, but audio
quality may suffer.
-config SND_CS46XX
- tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x"
- depends on SND
- select SND_RAWMIDI
+config SND_CA0106
+ tristate "SB Audigy LS / Live 24bit"
select SND_AC97_CODEC
+ select SND_RAWMIDI
+ select SND_VMASTER
help
- Say Y here to include support for Cirrus Logic CS4610/CS4612/
- CS4614/CS4615/CS4622/CS4624/CS4630/CS4280 chips.
+ Say Y here to include support for the Sound Blaster Audigy LS
+ and Live 24bit.
To compile this driver as a module, choose M here: the module
- will be called snd-cs46xx.
+ will be called snd-ca0106.
-config SND_CS46XX_NEW_DSP
- bool "Cirrus Logic (Sound Fusion) New DSP support (EXPERIMENTAL)"
- depends on SND_CS46XX && EXPERIMENTAL
+config SND_CMIPCI
+ tristate "C-Media 8338, 8738, 8768, 8770"
+ select SND_OPL3_LIB
+ select SND_MPU401_UART
+ select SND_PCM
help
- Say Y here to use a new DSP image for SPDIF and dual codecs.
+ If you want to use soundcards based on C-Media CMI8338, CMI8738,
+ CMI8768 or CMI8770 chips, say Y here and read
+ <file:Documentation/sound/alsa/CMIPCI.txt>.
- This works better than the old code, so say Y.
+ To compile this driver as a module, choose M here: the module
+ will be called snd-cmipci.
+
+config SND_OXYGEN_LIB
+ tristate
+ select SND_PCM
+ select SND_MPU401_UART
+
+config SND_OXYGEN
+ tristate "C-Media 8788 (Oxygen)"
+ select SND_OXYGEN_LIB
+ help
+ Say Y here to include support for sound cards based on the
+ C-Media CMI8788 (Oxygen HD Audio) chip:
+ * Asound A-8788
+ * AuzenTech X-Meridian
+ * Bgears b-Enspirer
+ * Club3D Theatron DTS
+ * HT-Omega Claro (plus)
+ * HT-Omega Claro halo (XT)
+ * Razer Barracuda AC-1
+ * Sondigo Inferno
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-oxygen.
config SND_CS4281
tristate "Cirrus Logic (Sound Fusion) CS4281"
- depends on SND
select SND_OPL3_LIB
select SND_RAWMIDI
select SND_AC97_CODEC
To compile this driver as a module, choose M here: the module
will be called snd-cs4281.
-config SND_EMU10K1
- tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)"
- depends on SND
- select SND_HWDEP
+config SND_CS46XX
+ tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x"
select SND_RAWMIDI
select SND_AC97_CODEC
help
- Say Y to include support for Sound Blaster PCI 512, Live!,
- Audigy and E-mu APS (partially supported) soundcards.
+ Say Y here to include support for Cirrus Logic CS4610/CS4612/
+ CS4614/CS4615/CS4622/CS4624/CS4630/CS4280 chips.
- The confusing multitude of mixer controls is documented in
- <file:Documentation/sound/alsa/SB-Live-mixer.txt> and
- <file:Documentation/sound/alsa/Audigy-mixer.txt>.
+ To compile this driver as a module, choose M here: the module
+ will be called snd-cs46xx.
+
+config SND_CS46XX_NEW_DSP
+ bool "Cirrus Logic (Sound Fusion) New DSP support"
+ depends on SND_CS46XX
+ default y
+ help
+ Say Y here to use a new DSP image for SPDIF and dual codecs.
+
+ This works better than the old code, so say Y.
+
+config SND_CS5530
+ tristate "CS5530 Audio"
+ depends on ISA_DMA_API
+ select SND_SB16_DSP
+ help
+ Say Y here to include support for audio on Cyrix/NatSemi CS5530 chips.
To compile this driver as a module, choose M here: the module
- will be called snd-emu10k1.
+ will be called snd-cs5530.
-config SND_EMU10K1X
- tristate "Emu10k1X (Dell OEM Version)"
- depends on SND
+config SND_CS5535AUDIO
+ tristate "CS5535/CS5536 Audio"
+ select SND_PCM
select SND_AC97_CODEC
- select SND_RAWMIDI
help
- Say Y here to include support for the Dell OEM version of the
- Sound Blaster Live!.
+ Say Y here to include support for audio on CS5535 chips. It is
+ referred to as NS CS5535 IO or AMD CS5535 IO companion in
+ various literature. This driver also supports the CS5536 audio
+ device. However, for both chips, on certain boards, you may
+ need to use ac97_quirk=hp_only if your board has physically
+ mapped headphone out to master output. If that works for you,
+ send lspci -vvv output to the mailing list so that your board
+ can be identified in the quirks list.
To compile this driver as a module, choose M here: the module
- will be called snd-emu10k1x.
+ will be called snd-cs5535audio.
-config SND_CA0106
- tristate "SB Audigy LS / Live 24bit"
- depends on SND
- select SND_AC97_CODEC
+config SND_CTXFI
+ tristate "Creative Sound Blaster X-Fi"
+ select SND_PCM
help
- Say Y here to include support for the Sound Blaster Audigy LS
- and Live 24bit.
+ If you want to use soundcards based on Creative Sound Blastr X-Fi
+ boards with 20k1 or 20k2 chips, say Y here.
To compile this driver as a module, choose M here: the module
- will be called snd-ca0106.
+ will be called snd-ctxfi.
-config SND_KORG1212
- tristate "Korg 1212 IO"
- depends on SND
+config SND_DARLA20
+ tristate "(Echoaudio) Darla20"
+ select FW_LOADER
select SND_PCM
help
- Say Y here to include support for Korg 1212IO soundcards.
+ Say 'Y' or 'M' to include support for Echoaudio Darla.
To compile this driver as a module, choose M here: the module
- will be called snd-korg1212.
+ will be called snd-darla20
-config SND_MIXART
- tristate "Digigram miXart"
- depends on SND
- select SND_HWDEP
+config SND_GINA20
+ tristate "(Echoaudio) Gina20"
+ select FW_LOADER
select SND_PCM
help
- If you want to use Digigram miXart soundcards, say Y here and
- read <file:Documentation/sound/alsa/MIXART.txt>.
+ Say 'Y' or 'M' to include support for Echoaudio Gina.
To compile this driver as a module, choose M here: the module
- will be called snd-mixart.
+ will be called snd-gina20
-config SND_NM256
- tristate "NeoMagic NM256AV/ZX"
- depends on SND
- select SND_AC97_CODEC
+config SND_LAYLA20
+ tristate "(Echoaudio) Layla20"
+ select FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
help
- Say Y here to include support for NeoMagic NM256AV/ZX chips.
+ Say 'Y' or 'M' to include support for Echoaudio Layla.
To compile this driver as a module, choose M here: the module
- will be called snd-nm256.
+ will be called snd-layla20
-config SND_RME32
- tristate "RME Digi32, 32/8, 32 PRO"
- depends on SND
+config SND_DARLA24
+ tristate "(Echoaudio) Darla24"
+ select FW_LOADER
select SND_PCM
help
- Say Y to include support for RME Digi32, Digi32 PRO and
- Digi32/8 (Sek'd Prodif32, Prodif96 and Prodif Gold) audio
- devices.
+ Say 'Y' or 'M' to include support for Echoaudio Darla24.
To compile this driver as a module, choose M here: the module
- will be called snd-rme32.
+ will be called snd-darla24
-config SND_RME96
- tristate "RME Digi96, 96/8, 96/8 PRO"
- depends on SND
+config SND_GINA24
+ tristate "(Echoaudio) Gina24"
+ select FW_LOADER
select SND_PCM
help
- Say Y here to include support for RME Digi96, Digi96/8 and
- Digi96/8 PRO/PAD/PST soundcards.
+ Say 'Y' or 'M' to include support for Echoaudio Gina24.
To compile this driver as a module, choose M here: the module
- will be called snd-rme96.
+ will be called snd-gina24
-config SND_RME9652
- tristate "RME Digi9652 (Hammerfall)"
- depends on SND
+config SND_LAYLA24
+ tristate "(Echoaudio) Layla24"
+ select FW_LOADER
+ select SND_RAWMIDI
select SND_PCM
help
- Say Y here to include support for RME Hammerfall (RME
- Digi9652/Digi9636) soundcards.
+ Say 'Y' or 'M' to include support for Echoaudio Layla24.
To compile this driver as a module, choose M here: the module
- will be called snd-rme9652.
+ will be called snd-layla24
-config SND_HDSP
- tristate "RME Hammerfall DSP Audio"
- depends on SND
- select SND_HWDEP
+config SND_MONA
+ tristate "(Echoaudio) Mona"
+ select FW_LOADER
select SND_RAWMIDI
select SND_PCM
help
- Say Y here to include support for RME Hammerfall DSP Audio
- soundcards.
+ Say 'Y' or 'M' to include support for Echoaudio Mona.
To compile this driver as a module, choose M here: the module
- will be called snd-hdsp.
+ will be called snd-mona
-config SND_HDSPM
- tristate "RME Hammerfall DSP MADI"
- depends on SND
- select SND_HWDEP
+config SND_MIA
+ tristate "(Echoaudio) Mia"
+ select FW_LOADER
select SND_RAWMIDI
select SND_PCM
help
- Say Y here to include support for RME Hammerfall DSP MADI
- soundcards.
+ Say 'Y' or 'M' to include support for Echoaudio Mia and Mia-midi.
To compile this driver as a module, choose M here: the module
- will be called snd-hdspm.
+ will be called snd-mia
-config SND_TRIDENT
- tristate "Trident 4D-Wave DX/NX; SiS 7018"
- depends on SND
- select SND_MPU401_UART
- select SND_AC97_CODEC
+config SND_ECHO3G
+ tristate "(Echoaudio) 3G cards"
+ select FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
help
- Say Y here to include support for soundcards based on Trident
- 4D-Wave DX/NX or SiS 7018 chips.
+ Say 'Y' or 'M' to include support for Echoaudio Gina3G and Layla3G.
To compile this driver as a module, choose M here: the module
- will be called snd-trident.
+ will be called snd-echo3g
-config SND_YMFPCI
- tristate "Yamaha YMF724/740/744/754"
- depends on SND
- select SND_OPL3_LIB
- select SND_MPU401_UART
- select SND_AC97_CODEC
+config SND_INDIGO
+ tristate "(Echoaudio) Indigo"
+ select FW_LOADER
+ select SND_PCM
help
- Say Y here to include support for Yamaha PCI audio chips -
- YMF724, YMF724F, YMF740, YMF740C, YMF744, YMF754.
+ Say 'Y' or 'M' to include support for Echoaudio Indigo.
To compile this driver as a module, choose M here: the module
- will be called snd-ymfpci.
+ will be called snd-indigo
-config SND_ALS4000
- tristate "Avance Logic ALS4000"
- depends on SND && ISA_DMA_API
- select SND_OPL3_LIB
- select SND_MPU401_UART
+config SND_INDIGOIO
+ tristate "(Echoaudio) Indigo IO"
+ select FW_LOADER
select SND_PCM
help
- Say Y here to include support for soundcards based on Avance Logic
- ALS4000 chips.
+ Say 'Y' or 'M' to include support for Echoaudio Indigo IO.
To compile this driver as a module, choose M here: the module
- will be called snd-als4000.
+ will be called snd-indigoio
-config SND_CMIPCI
- tristate "C-Media 8738, 8338"
- depends on SND
- select SND_OPL3_LIB
- select SND_MPU401_UART
+config SND_INDIGODJ
+ tristate "(Echoaudio) Indigo DJ"
+ select FW_LOADER
select SND_PCM
help
- If you want to use soundcards based on C-Media CMI8338 or CMI8738
- chips, say Y here and read
- <file:Documentation/sound/alsa/CMIPCI.txt>.
+ Say 'Y' or 'M' to include support for Echoaudio Indigo DJ.
To compile this driver as a module, choose M here: the module
- will be called snd-cmipci.
+ will be called snd-indigodj
+
+config SND_INDIGOIOX
+ tristate "(Echoaudio) Indigo IOx"
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Indigo IOx.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-indigoiox
+
+config SND_INDIGODJX
+ tristate "(Echoaudio) Indigo DJx"
+ select FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Indigo DJx.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-indigodjx
+
+config SND_EMU10K1
+ tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)"
+ select FW_LOADER
+ select SND_HWDEP
+ select SND_RAWMIDI
+ select SND_AC97_CODEC
+ help
+ Say Y to include support for Sound Blaster PCI 512, Live!,
+ Audigy and E-mu APS (partially supported) soundcards.
+
+ The confusing multitude of mixer controls is documented in
+ <file:Documentation/sound/alsa/SB-Live-mixer.txt> and
+ <file:Documentation/sound/alsa/Audigy-mixer.txt>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-emu10k1.
+
+config SND_EMU10K1X
+ tristate "Emu10k1X (Dell OEM Version)"
+ select SND_AC97_CODEC
+ select SND_RAWMIDI
+ help
+ Say Y here to include support for the Dell OEM version of the
+ Sound Blaster Live!.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-emu10k1x.
config SND_ENS1370
tristate "(Creative) Ensoniq AudioPCI 1370"
- depends on SND
select SND_RAWMIDI
select SND_PCM
help
config SND_ENS1371
tristate "(Creative) Ensoniq AudioPCI 1371/1373"
- depends on SND
select SND_RAWMIDI
select SND_AC97_CODEC
help
config SND_ES1938
tristate "ESS ES1938/1946/1969 (Solo-1)"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
config SND_ES1968
tristate "ESS ES1968/1978 (Maestro-1/2/2E)"
- depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
help
To compile this driver as a module, choose M here: the module
will be called snd-es1968.
-config SND_MAESTRO3
- tristate "ESS Allegro/Maestro3"
- depends on SND
- select SND_AC97_CODEC
+config SND_ES1968_INPUT
+ bool "Enable input device for es1968 volume buttons"
+ depends on SND_ES1968
+ depends on INPUT=y || INPUT=SND_ES1968
help
- Say Y here to include support for soundcards based on ESS Maestro 3
- (Allegro) chips.
-
- To compile this driver as a module, choose M here: the module
- will be called snd-maestro3.
+ If you say Y here, you will get an input device which reports
+ keypresses for the volume buttons connected to the es1968 chip.
+ If you say N the buttons will directly control the master volume.
+ It is recommended to say Y.
config SND_FM801
tristate "ForteMedia FM801"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
To compile this driver as a module, choose M here: the module
will be called snd-fm801.
-config SND_FM801_TEA575X
- tristate "ForteMedia FM801 + TEA5757 tuner"
+config SND_FM801_TEA575X_BOOL
+ bool "ForteMedia FM801 + TEA5757 tuner"
depends on SND_FM801
- select VIDEO_DEV
+ depends on VIDEO_V4L2=y || VIDEO_V4L2=SND_FM801
help
Say Y here to include support for soundcards based on the ForteMedia
FM801 chip with a TEA5757 tuner connected to GPIO1-3 pins (Media
- Forte SF256-PCS-02).
+ Forte SF256-PCS-02) into the snd-fm801 driver.
+
+config SND_FM801_TEA575X
+ tristate
+ depends on SND_FM801_TEA575X_BOOL
+ default SND_FM801
+
+source "sound/pci/hda/Kconfig"
+
+config SND_HDSP
+ tristate "RME Hammerfall DSP Audio"
+ select SND_HWDEP
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say Y here to include support for RME Hammerfall DSP Audio
+ soundcards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-hdsp.
+
+comment "Don't forget to add built-in firmwares for HDSP driver"
+ depends on SND_HDSP=y
+
+config SND_HDSPM
+ tristate "RME Hammerfall DSP MADI"
+ select SND_HWDEP
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say Y here to include support for RME Hammerfall DSP MADI
+ soundcards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-hdspm.
+
+config SND_HIFIER
+ tristate "TempoTec HiFier Fantasia"
+ select SND_OXYGEN_LIB
+ help
+ Say Y here to include support for the MediaTek/TempoTec HiFier
+ Fantasia sound card.
To compile this driver as a module, choose M here: the module
- will be called snd-fm801-tea575x.
+ will be called snd-hifier.
config SND_ICE1712
tristate "ICEnsemble ICE1712 (Envy24)"
- depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
+ select BITREVERSE
help
Say Y here to include support for soundcards based on the
ICE1712 (Envy24) chip.
Currently supported hardware is: M-Audio Delta 1010(LT),
DiO 2496, 66, 44, 410, Audiophile 24/96; Digigram VX442;
- TerraTec EWX 24/96, EWS 88MT, 88D, DMX 6Fire, Phase 88;
- Hoontech SoundTrack DSP 24/Value/Media7.1; Event EZ8.
+ TerraTec EWX 24/96, EWS 88MT/D, DMX 6Fire, Phase 88;
+ Hoontech SoundTrack DSP 24/Value/Media7.1; Event EZ8;
+ Lionstracs Mediastation, Terrasoniq TS 88.
To compile this driver as a module, choose M here: the module
will be called snd-ice1712.
config SND_ICE1724
tristate "ICE/VT1724/1720 (Envy24HT/PT)"
- depends on SND
- select SND_MPU401_UART
+ select SND_RAWMIDI
select SND_AC97_CODEC
+ select SND_VMASTER
help
Say Y here to include support for soundcards based on
ICE/VT1724/1720 (Envy24HT/PT) chips.
Currently supported hardware is: AMP AUDIO2000; M-Audio
- Revolution 7.1; TerraTec Aureon 5.1 Sky, 7.1 Space/Universe;
- AudioTrak Prodigy 7.1; Pontis MS300; Albatron K8X800 Pro II;
- Chaintech ZNF3-150/250.
+ Revolution 5.1, 7.1, Audiophile 192; TerraTec Aureon 5.1 Sky,
+ 7.1 Space/Universe, Phase 22/28; Onkyo SE-90PCI, SE-200PCI;
+ AudioTrak Prodigy 192, 7.1 (HIFI/LT/XT), HD2; Hercules
+ Fortissimo IV; ESI Juli@; Pontis MS300; EGO-SYS WaveTerminal
+ 192M; Albatron K8X800 Pro II; Chaintech ZNF3-150/250, 9CJS,
+ AV-710; Shuttle SN25P.
To compile this driver as a module, choose M here: the module
will be called snd-ice1724.
config SND_INTEL8X0
tristate "Intel/SiS/nVidia/AMD/ALi AC97 Controller"
- depends on SND
select SND_AC97_CODEC
help
Say Y here to include support for the integrated AC97 sound
will be called snd-intel8x0.
config SND_INTEL8X0M
- tristate "Intel/SiS/nVidia/AMD MC97 Modem (EXPERIMENTAL)"
- depends on SND && EXPERIMENTAL
+ tristate "Intel/SiS/nVidia/AMD MC97 Modem"
select SND_AC97_CODEC
help
Say Y here to include support for the integrated MC97 modem on
To compile this driver as a module, choose M here: the module
will be called snd-intel8x0m.
+config SND_KORG1212
+ tristate "Korg 1212 IO"
+ select SND_PCM
+ help
+ Say Y here to include support for Korg 1212IO soundcards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-korg1212.
+
+config SND_LX6464ES
+ tristate "Digigram LX6464ES"
+ select SND_PCM
+ help
+ Say Y here to include support for Digigram LX6464ES boards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-lx6464es.
+
+
+config SND_MAESTRO3
+ tristate "ESS Allegro/Maestro3"
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for soundcards based on ESS Maestro 3
+ (Allegro) chips.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-maestro3.
+
+config SND_MAESTRO3_INPUT
+ bool "Enable input device for maestro3 volume buttons"
+ depends on SND_MAESTRO3
+ depends on INPUT=y || INPUT=SND_MAESTRO3
+ help
+ If you say Y here, you will get an input device which reports
+ keypresses for the volume buttons connected to the maestro3 chip.
+ If you say N the buttons will directly control the master volume.
+ It is recommended to say Y.
+
+config SND_MIXART
+ tristate "Digigram miXart"
+ select SND_HWDEP
+ select SND_PCM
+ help
+ If you want to use Digigram miXart soundcards, say Y here and
+ read <file:Documentation/sound/alsa/MIXART.txt>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-mixart.
+
+config SND_NM256
+ tristate "NeoMagic NM256AV/ZX"
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for NeoMagic NM256AV/ZX chips.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-nm256.
+
+config SND_PCXHR
+ tristate "Digigram PCXHR"
+ select SND_PCM
+ select SND_HWDEP
+ help
+ Say Y here to include support for Digigram PCXHR boards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-pcxhr.
+
+config SND_RIPTIDE
+ tristate "Conexant Riptide"
+ select FW_LOADER
+ select SND_OPL3_LIB
+ select SND_MPU401_UART
+ select SND_AC97_CODEC
+ help
+ Say 'Y' or 'M' to include support for Conexant Riptide chip.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-riptide
+
+config SND_RME32
+ tristate "RME Digi32, 32/8, 32 PRO"
+ select SND_PCM
+ help
+ Say Y to include support for RME Digi32, Digi32 PRO and
+ Digi32/8 (Sek'd Prodif32, Prodif96 and Prodif Gold) audio
+ devices.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-rme32.
+
+config SND_RME96
+ tristate "RME Digi96, 96/8, 96/8 PRO"
+ select SND_PCM
+ help
+ Say Y here to include support for RME Digi96, Digi96/8 and
+ Digi96/8 PRO/PAD/PST soundcards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-rme96.
+
+config SND_RME9652
+ tristate "RME Digi9652 (Hammerfall)"
+ select SND_PCM
+ help
+ Say Y here to include support for RME Hammerfall (RME
+ Digi9652/Digi9636) soundcards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-rme9652.
+
+config SND_SIS7019
+ tristate "SiS 7019 Audio Accelerator"
+ depends on X86 && !X86_64
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for the SiS 7019 Audio Accelerator.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-sis7019.
+
config SND_SONICVIBES
tristate "S3 SonicVibes"
- depends on SND
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
To compile this driver as a module, choose M here: the module
will be called snd-sonicvibes.
+config SND_TRIDENT
+ tristate "Trident 4D-Wave DX/NX; SiS 7018"
+ select SND_MPU401_UART
+ select SND_AC97_CODEC
+ help
+ Say Y here to include support for soundcards based on Trident
+ 4D-Wave DX/NX or SiS 7018 chips.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-trident.
+
config SND_VIA82XX
tristate "VIA 82C686A/B, 8233/8235 AC97 Controller"
- depends on SND
select SND_MPU401_UART
select SND_AC97_CODEC
help
config SND_VIA82XX_MODEM
tristate "VIA 82C686A/B, 8233 based Modems"
- depends on SND
select SND_AC97_CODEC
help
Say Y here to include support for the integrated MC97 modem on
To compile this driver as a module, choose M here: the module
will be called snd-via82xx-modem.
+config SND_VIRTUOSO
+ tristate "Asus Virtuoso 100/200 (Xonar)"
+ select SND_OXYGEN_LIB
+ help
+ Say Y here to include support for sound cards based on the
+ Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X,
+ Essence ST (Deluxe), and Essence STX.
+ Support for the DS is experimental.
+ Support for the HDAV1.3 (Deluxe) is very experimental.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-virtuoso.
+
config SND_VX222
tristate "Digigram VX222"
- depends on SND
select SND_VX_LIB
help
Say Y here to include support for Digigram VX222 soundcards.
To compile this driver as a module, choose M here: the module
will be called snd-vx222.
-config SND_HDA_INTEL
- tristate "Intel HD Audio"
- depends on SND
- select SND_PCM
+config SND_YMFPCI
+ tristate "Yamaha YMF724/740/744/754"
+ select SND_OPL3_LIB
+ select SND_MPU401_UART
+ select SND_AC97_CODEC
help
- Say Y here to include support for Intel "High Definition
- Audio" (Azalia) motherboard devices.
+ Say Y here to include support for Yamaha PCI audio chips -
+ YMF724, YMF724F, YMF740, YMF740C, YMF744, YMF754.
To compile this driver as a module, choose M here: the module
- will be called snd-hda-intel.
+ will be called snd-ymfpci.
-endmenu
+endif # SND_PCI
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff