#
# Here are the steps we take:
#
-# 1) Record all the local symbols by using 'nm'
+# 1) Record all the local and weak symbols by using 'nm'
# 2) Use objdump to find all the call site offsets and sections for
# mcount.
# 3) Compile the list into its own object.
my $V = '0.1';
-if ($#ARGV != 10) {
- print "usage: $P arch bits objdump objcopy cc ld nm rm mv is_module inputfile\n";
+if ($#ARGV != 11) {
+ print "usage: $P arch endian bits objdump objcopy cc ld nm rm mv is_module inputfile\n";
print "version: $V\n";
exit(1);
}
-my ($arch, $bits, $objdump, $objcopy, $cc,
+my ($arch, $endian, $bits, $objdump, $objcopy, $cc,
$ld, $nm, $rm, $mv, $is_module, $inputfile) = @ARGV;
# This file refers to mcount and shouldn't be ftraced, so lets' ignore it
my %convert; # List of local functions used that needs conversion
my $type;
-my $nm_regex; # Find the local functions (return function)
+my $local_regex; # Match a local function (return function)
+my $weak_regex; # Match a weak function (return function)
my $section_regex; # Find the start of a section
my $function_regex; # Find the name of a function
# (return offset and func name)
my $mcount_regex; # Find the call site to mcount (return offset)
my $alignment; # The .align value to use for $mcount_section
my $section_type; # Section header plus possible alignment command
+my $can_use_local = 0; # If we can use local function references
-if ($arch eq "x86") {
+# Shut up recordmcount if user has older objcopy
+my $quiet_recordmcount = ".tmp_quiet_recordmcount";
+my $print_warning = 1;
+$print_warning = 0 if ( -f $quiet_recordmcount);
+
+##
+# check_objcopy - whether objcopy supports --globalize-symbols
+#
+# --globalize-symbols came out in 2.17, we must test the version
+# of objcopy, and if it is less than 2.17, then we can not
+# record local functions.
+sub check_objcopy
+{
+ open (IN, "$objcopy --version |") or die "error running $objcopy";
+ while (<IN>) {
+ if (/objcopy.*\s(\d+)\.(\d+)/) {
+ $can_use_local = 1 if ($1 > 2 || ($1 == 2 && $2 >= 17));
+ last;
+ }
+ }
+ close (IN);
+
+ if (!$can_use_local && $print_warning) {
+ print STDERR "WARNING: could not find objcopy version or version " .
+ "is less than 2.17.\n" .
+ "\tLocal function references are disabled.\n";
+ open (QUIET, ">$quiet_recordmcount");
+ printf QUIET "Disables the warning from recordmcount.pl\n";
+ close QUIET;
+ }
+}
+
+if ($arch =~ /(x86(_64)?)|(i386)/) {
if ($bits == 64) {
$arch = "x86_64";
} else {
# We base the defaults off of i386, the other archs may
# feel free to change them in the below if statements.
#
-$nm_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\S+)";
+$local_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\S+)";
+$weak_regex = "^[0-9a-fA-F]+\\s+([wW])\\s+(\\S+)";
$section_regex = "Disassembly of section\\s+(\\S+):";
$function_regex = "^([0-9a-fA-F]+)\\s+<(.*?)>:";
$mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\smcount\$";
$cc .= " -m32";
} elsif ($arch eq "powerpc") {
- $nm_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\.?\\S+)";
+ $local_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\.?\\S+)";
$function_regex = "^([0-9a-fA-F]+)\\s+<(\\.?.*?)>:";
$mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s\\.?_mcount\$";
$ld .= " -m elf64_sparc";
$cc .= " -m64";
$objcopy .= " -O elf64-sparc";
+} elsif ($arch eq "mips") {
+ # To enable module support, we need to enable the -mlong-calls option
+ # of gcc for module, after using this option, we can not get the real
+ # offset of the calling to _mcount, but the offset of the lui
+ # instruction or the addiu one. herein, we record the address of the
+ # first one, and then we can replace this instruction by a branch
+ # instruction to jump over the profiling function to filter the
+ # indicated functions, or swith back to the lui instruction to trace
+ # them, which means dynamic tracing.
+ #
+ # c: 3c030000 lui v1,0x0
+ # c: R_MIPS_HI16 _mcount
+ # c: R_MIPS_NONE *ABS*
+ # c: R_MIPS_NONE *ABS*
+ # 10: 64630000 daddiu v1,v1,0
+ # 10: R_MIPS_LO16 _mcount
+ # 10: R_MIPS_NONE *ABS*
+ # 10: R_MIPS_NONE *ABS*
+ # 14: 03e0082d move at,ra
+ # 18: 0060f809 jalr v1
+ #
+ # for the kernel:
+ #
+ # 10: 03e0082d move at,ra
+ # 14: 0c000000 jal 0 <loongson_halt>
+ # 14: R_MIPS_26 _mcount
+ # 14: R_MIPS_NONE *ABS*
+ # 14: R_MIPS_NONE *ABS*
+ # 18: 00020021 nop
+ if ($is_module eq "0") {
+ $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$";
+ } else {
+ $mcount_regex = "^\\s*([0-9a-fA-F]+): R_MIPS_HI16\\s+_mcount\$";
+ }
+ $objdump .= " -Melf-trad".$endian."mips ";
+
+ if ($endian eq "big") {
+ $endian = " -EB ";
+ $ld .= " -melf".$bits."btsmip";
+ } else {
+ $endian = " -EL ";
+ $ld .= " -melf".$bits."ltsmip";
+ }
+
+ $cc .= " -mno-abicalls -fno-pic -mabi=" . $bits . $endian;
+ $ld .= $endian;
+
+ if ($bits == 64) {
+ $function_regex =
+ "^([0-9a-fA-F]+)\\s+<(.|[^\$]L.*?|\$[^L].*?|[^\$][^L].*?)>:";
+ $type = ".dword";
+ }
+} elsif ($arch eq "microblaze") {
+ # Microblaze calls '_mcount' instead of plain 'mcount'.
+ $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$";
} else {
die "Arch $arch is not supported with CONFIG_FTRACE_MCOUNT_RECORD";
}
my $mcount_s = $dirname . "/.tmp_mc_" . $prefix . ".s";
my $mcount_o = $dirname . "/.tmp_mc_" . $prefix . ".o";
-#
-# --globalize-symbols came out in 2.17, we must test the version
-# of objcopy, and if it is less than 2.17, then we can not
-# record local functions.
-my $use_locals = 01;
-my $local_warn_once = 0;
-my $found_version = 0;
-
-open (IN, "$objcopy --version |") || die "error running $objcopy";
-while (<IN>) {
- if (/objcopy.*\s(\d+)\.(\d+)/) {
- my $major = $1;
- my $minor = $2;
-
- $found_version = 1;
- if ($major < 2 ||
- ($major == 2 && $minor < 17)) {
- $use_locals = 0;
- }
- last;
- }
-}
-close (IN);
-
-if (!$found_version) {
- print STDERR "WARNING: could not find objcopy version.\n" .
- "\tDisabling local function references.\n";
-}
+check_objcopy();
#
# Step 1: find all the local (static functions) and weak symbols.
-# 't' is local, 'w/W' is weak (we never use a weak function)
+# 't' is local, 'w/W' is weak
#
open (IN, "$nm $inputfile|") || die "error running $nm";
while (<IN>) {
- if (/$nm_regex/) {
+ if (/$local_regex/) {
$locals{$1} = 1;
- } elsif (/^[0-9a-fA-F]+\s+([wW])\s+(\S+)/) {
+ } elsif (/$weak_regex/) {
$weak{$2} = $1;
}
}
#
sub update_funcs
{
- return if ($#offsets < 0);
+ return unless ($ref_func and @offsets);
- defined($ref_func) || die "No function to reference";
-
- # A section only had a weak function, to represent it.
- # Unfortunately, a weak function may be overwritten by another
- # function of the same name, making all these offsets incorrect.
- # To be safe, we simply print a warning and bail.
+ # Sanity check on weak function. A weak function may be overwritten by
+ # another function of the same name, making all these offsets incorrect.
if (defined $weak{$ref_func}) {
- print STDERR
- "$inputfile: WARNING: referencing weak function" .
+ die "$inputfile: ERROR: referencing weak function" .
" $ref_func for mcount\n";
- return;
}
# is this function static? If so, note this fact.
if (defined $locals{$ref_func}) {
# only use locals if objcopy supports globalize-symbols
- if (!$use_locals) {
+ if (!$can_use_local) {
return;
}
$convert{$ref_func} = 1;
my $text;
+
+# read headers first
my $read_headers = 1;
while (<IN>) {
+
+ if ($read_headers && /$mcount_section/) {
+ #
+ # Somehow the make process can execute this script on an
+ # object twice. If it does, we would duplicate the mcount
+ # section and it will cause the function tracer self test
+ # to fail. Check if the mcount section exists, and if it does,
+ # warn and exit.
+ #
+ print STDERR "ERROR: $mcount_section already in $inputfile\n" .
+ "\tThis may be an indication that your build is corrupted.\n" .
+ "\tDelete $inputfile and try again. If the same object file\n" .
+ "\tstill causes an issue, then disable CONFIG_DYNAMIC_FTRACE.\n";
+ exit(-1);
+ }
+
# is it a section?
if (/$section_regex/) {
$read_headers = 0;
$read_function = 0;
}
# print out any recorded offsets
- update_funcs() if (defined($ref_func));
+ update_funcs();
# reset all markers and arrays
$text_found = 0;
$offset = hex $1;
}
}
- } elsif ($read_headers && /$mcount_section/) {
- #
- # Somehow the make process can execute this script on an
- # object twice. If it does, we would duplicate the mcount
- # section and it will cause the function tracer self test
- # to fail. Check if the mcount section exists, and if it does,
- # warn and exit.
- #
- print STDERR "ERROR: $mcount_section already in $inputfile\n" .
- "\tThis may be an indication that your build is corrupted.\n" .
- "\tDelete $inputfile and try again. If the same object file\n" .
- "\tstill causes an issue, then disable CONFIG_DYNAMIC_FTRACE.\n";
- exit(-1);
}
-
# is this a call site to mcount? If so, record it to print later
if ($text_found && /$mcount_regex/) {
$offsets[$#offsets + 1] = hex $1;
}
# dump out anymore offsets that may have been found
-update_funcs() if (defined($ref_func));
+update_funcs();
# If we did not find any mcount callers, we are done (do nothing).
if (!$opened) {
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff