# update usage message;
# fix some whitespace damage;
# be smarter about stopping when current version is larger than requested;
-# Randy Dunlap <rddunlap@osdl.org>, 2004-AUG-18.
+# Randy Dunlap <rdunlap@xenotime.net>, 2004-AUG-18.
+#
+# Add better support for (non-incremental) 2.6.x.y patches;
+# If an ending version number if not specified, the script automatically
+# increments the SUBLEVEL (x in 2.6.x.y) until no more patch files are found;
+# however, EXTRAVERSION (y in 2.6.x.y) is never automatically incremented
+# but must be specified fully.
+#
+# patch-kernel does not normally support reverse patching, but does so when
+# applying EXTRAVERSION (x.y) patches, so that moving from 2.6.11.y to 2.6.11.z
+# is easy and handled by the script (reverse 2.6.11.y and apply 2.6.11.z).
+# Randy Dunlap <rdunlap@xenotime.net>, 2005-APR-08.
+
+PNAME=patch-kernel
# Set directories from arguments, or use defaults.
sourcedir=${1-/usr/src/linux}
patchdir=${2-.}
stopvers=${3-default}
-if [ "$1" == -h -o "$1" == --help -o ! -r "$sourcedir/Makefile" ]; then
+if [ "$1" = -h -o "$1" = --help -o ! -r "$sourcedir/Makefile" ]; then
cat << USAGE
-usage: patch-kernel [-h] [ sourcedir [ patchdir [ stopversion ] [ -acxx ] ] ]
+usage: $PNAME [-h] [ sourcedir [ patchdir [ stopversion ] [ -acxx ] ] ]
source directory defaults to /usr/src/linux,
patch directory defaults to the current directory,
stopversion defaults to <all in patchdir>.
done
# ---------------------------------------------------------------------------
+# arg1 is filename
+noFile () {
+ echo "cannot find patch file: ${patch}"
+ exit 1
+}
+
+# ---------------------------------------------------------------------------
+backwards () {
+ echo "$PNAME does not support reverse patching"
+ exit 1
+}
+
+# ---------------------------------------------------------------------------
# Find a file, first parameter is basename of file
# it tries many compression mechanisms and sets variables to say how to get it
findFile () {
return 0;
}
+# ---------------------------------------------------------------------------
+# arg1 is patch filename
+reversePatch () {
+ echo -n "Reversing $1 (${name}) ... "
+ if $uncomp ${patchdir}/"$1"${ext} | patch -p1 -Rs -N -E -d $sourcedir
+ then
+ echo "done."
+ else
+ echo "failed. Clean it up."
+ exit 1
+ fi
+ if [ "`find $sourcedir/ '(' -name '*.rej' -o -name '.*.rej' ')' -print`" ]
+ then
+ echo "Aborting. Reject files found."
+ return 1
+ fi
+ # Remove backup files
+ find $sourcedir/ '(' -name '*.orig' -o -name '.*.orig' ')' -exec rm -f {} \;
+
+ return 0
+}
+
# set current VERSION, PATCHLEVEL, SUBLEVEL, EXTRAVERSION
-TMPFILE=`mktemp .tmpver.XXXXXX` || { echo "cannot make temp file" ; exit 1; }
+# force $TMPFILEs below to be in local directory: a slash character prevents
+# the dot command from using the search path.
+TMPFILE=`mktemp ./.tmpver.XXXXXX` || { echo "cannot make temp file" ; exit 1; }
grep -E "^(VERSION|PATCHLEVEL|SUBLEVEL|EXTRAVERSION)" $sourcedir/Makefile > $TMPFILE
tr -d [:blank:] < $TMPFILE > $TMPFILE.1
-source $TMPFILE.1
+. $TMPFILE.1
rm -f $TMPFILE*
if [ -z "$VERSION" -o -z "$PATCHLEVEL" -o -z "$SUBLEVEL" ]
then
EXTRAVER=
if [ x$EXTRAVERSION != "x" ]
then
- if [ ${EXTRAVERSION:0:1} == "." ]; then
- EXTRAVER=${EXTRAVERSION:1}
- else
- EXTRAVER=$EXTRAVERSION
- fi
+ EXTRAVER=${EXTRAVERSION#.}
EXTRAVER=${EXTRAVER%%[[:punct:]]*}
- #echo "patch-kernel: changing EXTRAVERSION from $EXTRAVERSION to $EXTRAVER"
+ #echo "$PNAME: changing EXTRAVERSION from $EXTRAVERSION to $EXTRAVER"
fi
#echo "stopvers=$stopvers"
if [ $stopvers != "default" ]; then
STOPSUBLEVEL=`echo $stopvers | cut -d. -f3`
STOPEXTRA=`echo $stopvers | cut -d. -f4`
- #echo "STOPSUBLEVEL=$STOPSUBLEVEL, STOPEXTRA=$STOPEXTRA"
+ STOPFULLVERSION=${stopvers%%.$STOPEXTRA}
+ #echo "#___STOPSUBLEVEL=/$STOPSUBLEVEL/, STOPEXTRA=/$STOPEXTRA/"
else
STOPSUBLEVEL=9999
STOPEXTRA=9999
fi
-while : # incrementing SUBLEVEL (s in v.p.s)
-do
- if [ x$EXTRAVER != "x" ]; then
+# This all assumes a 2.6.x[.y] kernel tree.
+# Don't allow backwards/reverse patching.
+if [ $STOPSUBLEVEL -lt $SUBLEVEL ]; then
+ backwards
+fi
+
+if [ x$EXTRAVER != "x" ]; then
CURRENTFULLVERSION="$VERSION.$PATCHLEVEL.$SUBLEVEL.$EXTRAVER"
- else
+else
CURRENTFULLVERSION="$VERSION.$PATCHLEVEL.$SUBLEVEL"
- fi
+fi
- if [ $stopvers == $CURRENTFULLVERSION ]; then
+if [ x$EXTRAVER != "x" ]; then
+ echo "backing up to: $VERSION.$PATCHLEVEL.$SUBLEVEL"
+ patch="patch-${CURRENTFULLVERSION}"
+ findFile $patchdir/${patch} || noFile ${patch}
+ reversePatch ${patch} || exit 1
+fi
+
+# now current is 2.6.x, with no EXTRA applied,
+# so update to target SUBLEVEL (2.6.SUBLEVEL)
+# and then to target EXTRAVER (2.6.SUB.EXTRAVER) if requested.
+# If not ending sublevel is specified, it is incremented until
+# no further sublevels are found.
+
+if [ $STOPSUBLEVEL -gt $SUBLEVEL ]; then
+while : # incrementing SUBLEVEL (s in v.p.s)
+do
+ CURRENTFULLVERSION="$VERSION.$PATCHLEVEL.$SUBLEVEL"
+ EXTRAVER=
+ if [ $STOPFULLVERSION = $CURRENTFULLVERSION ]; then
echo "Stopping at $CURRENTFULLVERSION base as requested."
break
fi
- while : # incrementing EXTRAVER (x in v.p.s.x)
- do
- EXTRAVER=$((EXTRAVER + 1))
- FULLVERSION="$VERSION.$PATCHLEVEL.$SUBLEVEL.$EXTRAVER"
- #echo "... trying $FULLVERSION ..."
-
- patch=patch-$FULLVERSION
-
- # See if the file exists and find extension
- findFile $patchdir/${patch} || break
-
- # Apply the patch and check all is OK
- applyPatch $patch || break
-
- continue 2
- done
-
- EXTRAVER=
- SUBLEVEL=$((SUBLEVEL + 1))
+ SUBLEVEL=$(($SUBLEVEL + 1))
FULLVERSION="$VERSION.$PATCHLEVEL.$SUBLEVEL"
- #echo "___ trying $FULLVERSION ___"
+ #echo "#___ trying $FULLVERSION ___"
- if [ $((SUBLEVEL)) -gt $((STOPSUBLEVEL)) ]; then
+ if [ $(($SUBLEVEL)) -gt $(($STOPSUBLEVEL)) ]; then
echo "Stopping since sublevel ($SUBLEVEL) is beyond stop-sublevel ($STOPSUBLEVEL)"
exit 1
fi
patch=patch-$FULLVERSION
-
# See if the file exists and find extension
- findFile $patchdir/${patch} || break
+ findFile $patchdir/${patch} || noFile ${patch}
# Apply the patch and check all is OK
applyPatch $patch || break
done
-#echo "base all done"
+#echo "#___sublevel all done"
+fi
+
+# There is no incremental searching for extraversion...
+if [ "$STOPEXTRA" != "" ]; then
+while : # just to allow break
+do
+# apply STOPEXTRA directly (not incrementally) (x in v.p.s.x)
+ FULLVERSION="$VERSION.$PATCHLEVEL.$SUBLEVEL.$STOPEXTRA"
+ #echo "#... trying $FULLVERSION ..."
+ patch=patch-$FULLVERSION
+
+ # See if the file exists and find extension
+ findFile $patchdir/${patch} || noFile ${patch}
+
+ # Apply the patch and check all is OK
+ applyPatch $patch || break
+ #echo "#___extraver all done"
+ break
+done
+fi
if [ x$gotac != x ]; then
# Out great user wants the -ac patches
# They could have done -ac (get latest) or -acxx where xx=version they want
- if [ $gotac == "-ac" ]; then
+ if [ $gotac = "-ac" ]; then
# They want the latest version
HIGHESTPATCH=0
for PATCHNAMES in $patchdir/patch-${CURRENTFULLVERSION}-ac*\.*
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff