# ==========================================================================
# Installing headers
#
-# header-y files will be installed verbatim
-# unifdef-y are the files where unifdef will be run before installing files
-# objhdr-y are generated files that will be installed verbatim
+# header-y - list files to be installed. They are preprocessed
+# to remove __KERNEL__ section of the file
+# unifdef-y - Same as header-y. Obsolete
+# objhdr-y - Same as header-y but for generated files
#
# ==========================================================================
-UNIFDEF := scripts/unifdef -U__KERNEL__
-
-# Eliminate the contents of (and inclusions of) compiler.h
-HDRSED := sed -e "s/ inline / __inline__ /g" \
- -e "s/[[:space:]]__user[[:space:]]\+/ /g" \
- -e "s/(__user[[:space:]]\+/ (/g" \
- -e "s/[[:space:]]__force[[:space:]]\+/ /g" \
- -e "s/(__force[[:space:]]\+/ (/g" \
- -e "s/[[:space:]]__iomem[[:space:]]\+/ /g" \
- -e "s/(__iomem[[:space:]]\+/ (/g" \
- -e "s/[[:space:]]__attribute_const__[[:space:]]\+/\ /g" \
- -e "s/[[:space:]]__attribute_const__$$//" \
- -e "/^\#include <linux\/compiler.h>/d"
-
+# called may set destination dir (when installing to asm/)
_dst := $(if $(dst),$(dst),$(obj))
-ifeq (,$(patsubst include/asm/%,,$(obj)/))
-# For producing the generated stuff in include/asm for biarch builds, include
-# both sets of Kbuild files; we'll generate anything which is mentioned in
-# _either_ arch, and recurse into subdirectories which are mentioned in either
-# arch. Since some directories may exist in one but not the other, we must
-# use $(wildcard...).
-GENASM := 1
-archasm := $(subst include/asm,asm-$(ARCH),$(obj))
-altarchasm := $(subst include/asm,asm-$(ALTARCH),$(obj))
-KBUILDFILES := $(wildcard $(srctree)/include/$(archasm)/Kbuild $(srctree)/include/$(altarchasm)/Kbuild)
-else
-KBUILDFILES := $(srctree)/$(obj)/Kbuild
-endif
+kbuild-file := $(srctree)/$(obj)/Kbuild
+include $(kbuild-file)
-include $(KBUILDFILES)
+_dst := $(if $(destination-y),$(destination-y),$(_dst))
-include scripts/Kbuild.include
+include scripts/Kbuild.include
-# If this is include/asm-$(ARCH) and there's no $(ALTARCH), then
-# override $(_dst) so that we install to include/asm directly.
-# Unless $(BIASMDIR) is set, in which case we're probably doing
-# a 'headers_install_all' build and we should keep the -$(ARCH)
-# in the directory name.
-ifeq ($(obj)$(ALTARCH),include/asm-$(ARCH)$(BIASMDIR))
- _dst := include/asm
-endif
+install := $(INSTALL_HDR_PATH)/$(_dst)
-header-y := $(sort $(header-y))
-unifdef-y := $(sort $(unifdef-y))
-subdir-y := $(patsubst %/,%,$(filter %/, $(header-y)))
-header-y := $(filter-out %/, $(header-y))
-header-y := $(filter-out $(unifdef-y),$(header-y))
+header-y := $(sort $(header-y) $(unifdef-y))
+subdirs := $(patsubst %/,%,$(filter %/, $(header-y)))
+header-y := $(filter-out %/, $(header-y))
-# stamp files for header checks
-check-y := $(patsubst %,.check.%,$(header-y) $(unifdef-y) $(objhdr-y))
+# files used to track state of install/check
+install-file := $(install)/.install
+check-file := $(install)/.check
-# Work out what needs to be removed
-oldheaders := $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,%,$(wildcard $(INSTALL_HDR_PATH)/$(_dst)/*.h))
-unwanted := $(filter-out $(header-y) $(unifdef-y) $(objhdr-y),$(oldheaders))
-
-oldcheckstamps := $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,%,$(wildcard $(INSTALL_HDR_PATH)/$(_dst)/.check.*.h))
-unwanted += $(filter-out $(check-y),$(oldcheckstamps))
+# all headers files for this dir
+all-files := $(header-y) $(objhdr-y)
+input-files := $(addprefix $(srctree)/$(obj)/,$(header-y)) \
+ $(addprefix $(objtree)/$(obj)/,$(objhdr-y))
+output-files := $(addprefix $(install)/, $(all-files))
-# Prefix them all with full paths to $(INSTALL_HDR_PATH)
-header-y := $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(header-y))
-unifdef-y := $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(unifdef-y))
-objhdr-y := $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(objhdr-y))
-check-y := $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(check-y))
+# Work out what needs to be removed
+oldheaders := $(patsubst $(install)/%,%,$(wildcard $(install)/*.h))
+unwanted := $(filter-out $(all-files),$(oldheaders))
+# Prefix unwanted with full paths to $(INSTALL_HDR_PATH)
+unwanted-file := $(addprefix $(install)/, $(unwanted))
-ifdef ALTARCH
-ifeq ($(obj),include/asm-$(ARCH))
-altarch-y := altarch-dir
-endif
-endif
+printdir = $(patsubst $(INSTALL_HDR_PATH)/%/,%,$(dir $@))
-# Make the definitions visible for recursive make invocations
-export ALTARCH
-export ARCHDEF
-export ALTARCHDEF
-
-quiet_cmd_o_hdr_install = INSTALL $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
- cmd_o_hdr_install = cp $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(objtree)/$(obj)/%,$@) \
- $(INSTALL_HDR_PATH)/$(_dst)
-
-quiet_cmd_headers_install = INSTALL $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
- cmd_headers_install = $(HDRSED) $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(srctree)/$(obj)/%,$@) \
- > $@
-
-quiet_cmd_unifdef = UNIFDEF $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
- cmd_unifdef = $(UNIFDEF) $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(srctree)/$(obj)/%,$@) \
- | $(HDRSED) > $@ || :
-
-quiet_cmd_check = CHECK $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/.check.%,$(_dst)/%,$@)
- cmd_check = $(CONFIG_SHELL) $(srctree)/scripts/hdrcheck.sh \
- $(INSTALL_HDR_PATH)/include $(subst /.check.,/,$@) $@
-
-quiet_cmd_remove = REMOVE $(_dst)/$@
- cmd_remove = rm -f $(INSTALL_HDR_PATH)/$(_dst)/$@
-
-quiet_cmd_mkdir = MKDIR $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
- cmd_mkdir = mkdir -p $@
-
-quiet_cmd_gen = GEN $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
- cmd_gen = \
-FNAME=$(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,%,$@); \
-STUBDEF=__ASM_STUB_`echo $$FNAME | tr a-z.- A-Z__`; \
-(echo "/* File autogenerated by 'make headers_install' */" ; \
-echo "\#ifndef $$STUBDEF" ; \
-echo "\#define $$STUBDEF" ; \
-echo "\# if $(ARCHDEF)" ; \
-if [ -r $(subst /$(_dst)/,/include/$(archasm)/,$@) ]; then \
- echo "\# include <$(archasm)/$$FNAME>" ; \
-else \
- echo "\# error $(archasm)/$$FNAME does not exist in" \
- "the $(ARCH) architecture" ; \
-fi ; \
-echo "\# elif $(ALTARCHDEF)" ; \
-if [ -r $(subst /$(_dst)/,/include/$(altarchasm)/,$@) ]; then \
- echo "\# include <$(altarchasm)/$$FNAME>" ; \
-else \
- echo "\# error $(altarchasm)/$$FNAME does not exist in" \
- "the $(ALTARCH) architecture" ; \
-fi ; \
-echo "\# else" ; \
-echo "\# warning This machine appears to be" \
- "neither $(ARCH) nor $(ALTARCH)." ; \
-echo "\# endif" ; \
-echo "\#endif /* $$STUBDEF */" ; \
-) > $@
-
-.PHONY: __headersinst __headerscheck
-
-ifdef HDRCHECK
-__headerscheck: $(subdir-y) $(check-y)
- @true
-
-$(check-y) : $(INSTALL_HDR_PATH)/$(_dst)/.check.%.h : $(INSTALL_HDR_PATH)/$(_dst)/%.h
- $(call cmd,check)
-
-# Other dependencies for $(check-y)
-include /dev/null $(wildcard $(check-y))
-
-# ... but leave $(check-y) as .PHONY for now until those deps are actually correct.
-.PHONY: $(check-y)
+quiet_cmd_install = INSTALL $(printdir) ($(words $(all-files))\
+ file$(if $(word 2, $(all-files)),s))
+ cmd_install = \
+ $(PERL) $< $(srctree)/$(obj) $(install) $(SRCARCH) $(header-y); \
+ $(PERL) $< $(objtree)/$(obj) $(install) $(SRCARCH) $(objhdr-y); \
+ touch $@
-else
-# Rules for installing headers
-__headersinst: $(subdir-y) $(header-y) $(unifdef-y) $(altarch-y) $(objhdr-y)
- @true
+quiet_cmd_remove = REMOVE $(unwanted)
+ cmd_remove = rm -f $(unwanted-file)
-$(objhdr-y) $(subdir-y) $(header-y) $(unifdef-y): | $(INSTALL_HDR_PATH)/$(_dst) $(unwanted)
+quiet_cmd_check = CHECK $(printdir) ($(words $(all-files)) files)
+# Headers list can be pretty long, xargs helps to avoid
+# the "Argument list too long" error.
+ cmd_check = for f in $(all-files); do \
+ echo "$(install)/$${f}"; done \
+ | xargs \
+ $(PERL) $< $(INSTALL_HDR_PATH)/include $(SRCARCH); \
+ touch $@
-$(INSTALL_HDR_PATH)/$(_dst):
- $(call cmd,mkdir)
+PHONY += __headersinst __headerscheck
-.PHONY: $(unwanted)
-$(unwanted):
- $(call cmd,remove)
+ifndef HDRCHECK
+# Rules for installing headers
+__headersinst: $(subdirs) $(install-file)
+ @:
-ifdef GENASM
-$(objhdr-y) $(header-y) $(unifdef-y): $(KBUILDFILES)
- $(call cmd,gen)
+targets += $(install-file)
+$(install-file): scripts/headers_install.pl $(input-files) FORCE
+ $(if $(unwanted),$(call cmd,remove),)
+ $(if $(wildcard $(dir $@)),,$(shell mkdir -p $(dir $@)))
+ $(call if_changed,install)
else
-$(objhdr-y) : $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(objtree)/$(obj)/%.h $(KBUILDFILES)
- $(call cmd,o_hdr_install)
+__headerscheck: $(subdirs) $(check-file)
+ @:
-$(header-y) : $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(srctree)/$(obj)/%.h $(KBUILDFILES)
- $(call cmd,headers_install)
+targets += $(check-file)
+$(check-file): scripts/headers_check.pl $(output-files) FORCE
+ $(call if_changed,check)
-$(unifdef-y) : $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(srctree)/$(obj)/%.h $(KBUILDFILES)
- $(call cmd,unifdef)
-endif
endif
-hdrinst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
+# Recursion
+hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
+.PHONY: $(subdirs)
+$(subdirs):
+ $(Q)$(MAKE) $(hdr-inst)=$(obj)/$@ dst=$(_dst)/$@
-.PHONY: altarch-dir
-# All the files in the normal arch dir must be created first, since we test
-# for their existence.
-altarch-dir: $(subdir-y) $(header-y) $(unifdef-y) $(objhdr-y)
- $(Q)$(MAKE) $(hdrinst)=include/asm-$(ALTARCH) dst=include/asm-$(ALTARCH)
- $(Q)$(MAKE) $(hdrinst)=include/asm dst=include/asm$(BIASMDIR)
+targets := $(wildcard $(sort $(targets)))
+cmd_files := $(wildcard \
+ $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
-# Recursion
-.PHONY: $(subdir-y)
-$(subdir-y):
- $(Q)$(MAKE) $(hdrinst)=$(obj)/$@ dst=$(_dst)/$@ rel=../$(rel)
+ifneq ($(cmd_files),)
+ include $(cmd_files)
+endif
+
+.PHONY: $(PHONY)
+PHONY += FORCE
+FORCE: ;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff