# ==========================================================================
# Installing headers
#
-# header-y files will be installed verbatim
-# unifdef-y are the files where unifdef will be run before installing files
-# objhdr-y are generated files that will be installed verbatim
+# header-y - list files to be installed. They are preprocessed
+# to remove __KERNEL__ section of the file
+# unifdef-y - Same as header-y. Obsolete
+# objhdr-y - Same as header-y but for generated files
#
# ==========================================================================
-UNIFDEF := unifdef -U__KERNEL__
-
-# Eliminate the contents of (and inclusions of) compiler.h
-HDRSED := sed -e "s/ inline / __inline__ /g" \
- -e "s/[[:space:]]__user[[:space:]]\+/ /g" \
- -e "s/(__user[[:space:]]\+/ (/g" \
- -e "s/[[:space:]]__force[[:space:]]\+/ /g" \
- -e "s/(__force[[:space:]]\+/ (/g" \
- -e "s/[[:space:]]__iomem[[:space:]]\+/ /g" \
- -e "s/(__iomem[[:space:]]\+/ (/g" \
- -e "s/[[:space:]]__attribute_const__[[:space:]]\+/\ /g" \
- -e "s/[[:space:]]__attribute_const__$$//" \
- -e "/^\#include <linux\/compiler.h>/d"
-
+# called may set destination dir (when installing to asm/)
_dst := $(if $(dst),$(dst),$(obj))
-.PHONY: __headersinst
-__headersinst:
-
-
-ifeq (,$(patsubst include/asm/%,,$(obj)/))
-# For producing the generated stuff in include/asm for biarch builds, include
-# both sets of Kbuild files; we'll generate anything which is mentioned in
-# _either_ arch, and recurse into subdirectories which are mentioned in either
-# arch. Since some directories may exist in one but not the other, we must
-# use '-include'.
-GENASM := 1
-archasm := $(subst include/asm,asm-$(ARCH),$(obj))
-altarchasm := $(subst include/asm,asm-$(ALTARCH),$(obj))
--include $(srctree)/include/$(archasm)/Kbuild
--include $(srctree)/include/$(altarchasm)/Kbuild
-else
-include $(srctree)/$(obj)/Kbuild
-endif
+kbuild-file := $(srctree)/$(obj)/Kbuild
+include $(kbuild-file)
+
+_dst := $(if $(destination-y),$(destination-y),$(_dst))
include scripts/Kbuild.include
-# If this is include/asm-$(ARCH) and there's no $(ALTARCH), then
-# override $(_dst) so that we install to include/asm directly.
-ifeq ($(obj)$(ALTARCH),include/asm-$(ARCH))
- _dst := include/asm
-endif
+install := $(INSTALL_HDR_PATH)/$(_dst)
-header-y := $(sort $(header-y))
-unifdef-y := $(sort $(unifdef-y))
-subdir-y := $(patsubst %/,%,$(filter %/, $(header-y)))
-header-y := $(filter-out %/, $(header-y))
-header-y := $(filter-out $(unifdef-y),$(header-y))
+header-y := $(sort $(header-y) $(unifdef-y))
+subdirs := $(patsubst %/,%,$(filter %/, $(header-y)))
+header-y := $(filter-out %/, $(header-y))
-ifdef ALTARCH
-ifeq ($(obj),include/asm-$(ARCH))
-altarch-y := altarch-dir
-endif
-endif
+# files used to track state of install/check
+install-file := $(install)/.install
+check-file := $(install)/.check
-# Make the definitions visible for recursive make invocations
-export ALTARCH
-export ARCHDEF
-export ALTARCHDEF
-
-quiet_cmd_o_hdr_install = INSTALL $(_dst)/$@
- cmd_o_hdr_install = cp $(objtree)/$(obj)/$@ $(INSTALL_HDR_PATH)/$(_dst)
-
-quiet_cmd_headers_install = INSTALL $(_dst)/$@
- cmd_headers_install = $(HDRSED) $(srctree)/$(obj)/$@ \
- > $(INSTALL_HDR_PATH)/$(_dst)/$@
-
-quiet_cmd_unifdef = UNIFDEF $(_dst)/$@
- cmd_unifdef = $(UNIFDEF) $(srctree)/$(obj)/$@ | $(HDRSED) \
- > $(INSTALL_HDR_PATH)/$(_dst)/$@ || :
-
-quiet_cmd_check = CHECK $(_dst)/$@
- cmd_check = $(srctree)/scripts/hdrcheck.sh \
- $(INSTALL_HDR_PATH)/include \
- $(INSTALL_HDR_PATH)/$(_dst)/$@
-
-quiet_cmd_mkdir = MKDIR $@
- cmd_mkdir = mkdir -p $(INSTALL_HDR_PATH)/$@
-
-quiet_cmd_gen = GEN $(_dst)/$@
- cmd_gen = \
-STUBDEF=__ASM_STUB_`echo $@ | tr a-z. A-Z_`; \
-(echo "/* File autogenerated by 'make headers_install' */" ; \
-echo "\#ifndef $$STUBDEF" ; \
-echo "\#define $$STUBDEF" ; \
-echo "\# if $(ARCHDEF)" ; \
-if [ -r $(INSTALL_HDR_PATH)/include/$(archasm)/$@ ]; then \
- echo "\# include <$(archasm)/$@>" ; \
-else \
- echo "\# error $(archasm)/$@ does not exist in" \
- "the $(ARCH) architecture" ; \
-fi ; \
-echo "\# elif $(ALTARCHDEF)" ; \
-if [ -r $(INSTALL_HDR_PATH)/include/$(altarchasm)/$@ ]; then \
- echo "\# include <$(altarchasm)/$@>" ; \
-else \
- echo "\# error $(altarchasm)/$@ does not exist in" \
- "the $(ALTARCH) architecture" ; \
-fi ; \
-echo "\# else" ; \
-echo "\# warning This machine appears to be" \
- "neither $(ARCH) nor $(ALTARCH)." ; \
-echo "\# endif" ; \
-echo "\#endif /* $$STUBDEF */" ; \
-) > $(INSTALL_HDR_PATH)/$(_dst)/$@
-
-__headersinst: $(subdir-y) $(header-y) $(unifdef-y) $(altarch-y) $(objhdr-y)
-
-.PHONY: $(header-y) $(unifdef-y) $(subdir-y)
-
-ifdef HDRCHECK
-# Rules for checking headers
-$(objhdr-y) $(header-y) $(unifdef-y):
- $(call cmd,check)
-else
-# Rules for installing headers
+# all headers files for this dir
+all-files := $(header-y) $(objhdr-y)
+input-files := $(addprefix $(srctree)/$(obj)/,$(header-y)) \
+ $(addprefix $(objtree)/$(obj)/,$(objhdr-y))
+output-files := $(addprefix $(install)/, $(all-files))
+
+# Work out what needs to be removed
+oldheaders := $(patsubst $(install)/%,%,$(wildcard $(install)/*.h))
+unwanted := $(filter-out $(all-files),$(oldheaders))
-$(objhdr-y) $(subdir-y) $(header-y) $(unifdef-y): $(_dst)
+# Prefix unwanted with full paths to $(INSTALL_HDR_PATH)
+unwanted-file := $(addprefix $(install)/, $(unwanted))
-.PHONY: $(_dst)
-$(_dst):
- $(call cmd,mkdir)
+printdir = $(patsubst $(INSTALL_HDR_PATH)/%/,%,$(dir $@))
-ifdef GENASM
-$(objhdr-y) $(header-y) $(unifdef-y):
- $(call cmd,gen)
+quiet_cmd_install = INSTALL $(printdir) ($(words $(all-files))\
+ file$(if $(word 2, $(all-files)),s))
+ cmd_install = \
+ $(PERL) $< $(srctree)/$(obj) $(install) $(SRCARCH) $(header-y); \
+ $(PERL) $< $(objtree)/$(obj) $(install) $(SRCARCH) $(objhdr-y); \
+ touch $@
+
+quiet_cmd_remove = REMOVE $(unwanted)
+ cmd_remove = rm -f $(unwanted-file)
+
+quiet_cmd_check = CHECK $(printdir) ($(words $(all-files)) files)
+# Headers list can be pretty long, xargs helps to avoid
+# the "Argument list too long" error.
+ cmd_check = for f in $(all-files); do \
+ echo "$(install)/$${f}"; done \
+ | xargs \
+ $(PERL) $< $(INSTALL_HDR_PATH)/include $(SRCARCH); \
+ touch $@
+
+PHONY += __headersinst __headerscheck
+
+ifndef HDRCHECK
+# Rules for installing headers
+__headersinst: $(subdirs) $(install-file)
+ @:
+
+targets += $(install-file)
+$(install-file): scripts/headers_install.pl $(input-files) FORCE
+ $(if $(unwanted),$(call cmd,remove),)
+ $(if $(wildcard $(dir $@)),,$(shell mkdir -p $(dir $@)))
+ $(call if_changed,install)
else
-$(objhdr-y):
- $(call cmd,o_hdr_install)
+__headerscheck: $(subdirs) $(check-file)
+ @:
-$(header-y):
- $(call cmd,headers_install)
+targets += $(check-file)
+$(check-file): scripts/headers_check.pl $(output-files) FORCE
+ $(call if_changed,check)
-$(unifdef-y):
- $(call cmd,unifdef)
-endif
endif
-hdrinst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
+# Recursion
+hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
+.PHONY: $(subdirs)
+$(subdirs):
+ $(Q)$(MAKE) $(hdr-inst)=$(obj)/$@ dst=$(_dst)/$@
-.PHONY: altarch-dir
-# All the files in the normal arch dir must be created first, since we test
-# for their existence.
-altarch-dir: $(subdir-y) $(header-y) $(unifdef-y) $(objhdr-y)
- $(Q)$(MAKE) $(hdrinst)=include/asm-$(ALTARCH) dst=include/asm-$(ALTARCH)
- $(Q)$(MAKE) $(hdrinst)=include/asm dst=include/asm
+targets := $(wildcard $(sort $(targets)))
+cmd_files := $(wildcard \
+ $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
-# Recursion
-$(subdir-y):
- $(Q)$(MAKE) $(hdrinst)=$(obj)/$@ dst=$(_dst)/$@ rel=../$(rel)
+ifneq ($(cmd_files),)
+ include $(cmd_files)
+endif
+
+.PHONY: $(PHONY)
+PHONY += FORCE
+FORCE: ;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff