src := $(obj)
-.PHONY: __build
+PHONY := __build
__build:
-# Read .config if it exist, otherwise ignore
--include .config
-
-include $(if $(wildcard $(obj)/Kbuild), $(obj)/Kbuild, $(obj)/Makefile)
-
+# Init all relevant variables used in kbuild files so
+# 1) they have correct type
+# 2) they do not inherit any value from the environment
+obj-y :=
+obj-m :=
+lib-y :=
+lib-m :=
+always :=
+targets :=
+subdir-y :=
+subdir-m :=
+EXTRA_AFLAGS :=
+EXTRA_CFLAGS :=
+EXTRA_CPPFLAGS :=
+EXTRA_LDFLAGS :=
+asflags-y :=
+ccflags-y :=
+cppflags-y :=
+ldflags-y :=
+
+subdir-asflags-y :=
+subdir-ccflags-y :=
+
+# Read auto.conf if it exists, otherwise ignore
+-include include/config/auto.conf
+
+include scripts/Kbuild.include
+
+# For backward compatibility check that these variables do not change
+save-cflags := $(CFLAGS)
+
+# The filename Kbuild has precedence over Makefile
+kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
+kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile)
+include $(kbuild-file)
+
+# If the save-* variables changed error out
+ifeq ($(KBUILD_NOPEDANTIC),)
+ ifneq ("$(save-cflags)","$(CFLAGS)")
+ $(error CFLAGS was changed in "$(kbuild-file)". Fix it to use EXTRA_CFLAGS)
+ endif
+endif
include scripts/Makefile.lib
ifdef host-progs
endif
endif
-# Do not include host rules unles needed
+# Do not include host rules unless needed
ifneq ($(hostprogs-y)$(hostprogs-m),)
include scripts/Makefile.host
endif
_dummy := $(foreach d,$(obj-dirs), $(shell [ -d $(d) ] || mkdir -p $(d)))
endif
-
-ifdef EXTRA_TARGETS
-$(warning kbuild: $(obj)/Makefile - Usage of EXTRA_TARGETS is obsolete in 2.6. Please fix!)
-endif
-
-ifdef build-targets
-$(warning kbuild: $(obj)/Makefile - Usage of build-targets is obsolete in 2.6. Please fix!)
-endif
-
-ifdef export-objs
-$(warning kbuild: $(obj)/Makefile - Usage of export-objs is obsolete in 2.6. Please fix!)
-endif
-
-ifdef O_TARGET
-$(warning kbuild: $(obj)/Makefile - Usage of O_TARGET := $(O_TARGET) is obsolete in 2.6. Please fix!)
-endif
-
-ifdef L_TARGET
-$(error kbuild: $(obj)/Makefile - Use of L_TARGET is replaced by lib-y in 2.6. Please fix!)
-endif
-
-ifdef list-multi
-$(warning kbuild: $(obj)/Makefile - list-multi := $(list-multi) is obsolete in 2.6. Please fix!)
-endif
-
ifndef obj
$(warning kbuild: Makefile.build is included improperly)
endif
builtin-target := $(obj)/built-in.o
endif
+modorder-target := $(obj)/modules.order
+
# We keep a list of all modules in $(MODVERDIR)
__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
- $(if $(KBUILD_MODULES),$(obj-m)) \
+ $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \
$(subdir-ym) $(always)
@:
endif
endif
+# Do section mismatch analysis for each module/built-in.o
+ifdef CONFIG_DEBUG_SECTION_MISMATCH
+ cmd_secanalysis = ; scripts/mod/modpost $@
+endif
# Compile C sources (.c)
# ---------------------------------------------------------------------------
# Default is built-in, unless we know otherwise
-modkern_cflags := $(CFLAGS_KERNEL)
+modkern_cflags = $(if $(part-of-module), $(CFLAGS_MODULE), $(CFLAGS_KERNEL))
quiet_modtag := $(empty) $(empty)
-$(real-objs-m) : modkern_cflags := $(CFLAGS_MODULE)
-$(real-objs-m:.o=.i) : modkern_cflags := $(CFLAGS_MODULE)
-$(real-objs-m:.o=.s) : modkern_cflags := $(CFLAGS_MODULE)
-$(real-objs-m:.o=.lst): modkern_cflags := $(CFLAGS_MODULE)
+$(real-objs-m) : part-of-module := y
+$(real-objs-m:.o=.i) : part-of-module := y
+$(real-objs-m:.o=.s) : part-of-module := y
+$(real-objs-m:.o=.lst): part-of-module := y
$(real-objs-m) : quiet_modtag := [M]
$(real-objs-m:.o=.i) : quiet_modtag := [M]
$(obj-m) : quiet_modtag := [M]
# Default for not multi-part modules
-modname = $(*F)
+modname = $(basetarget)
$(multi-objs-m) : modname = $(modname-multi)
$(multi-objs-m:.o=.i) : modname = $(modname-multi)
$(multi-objs-y:.o=.lst) : modname = $(modname-multi)
quiet_cmd_cc_s_c = CC $(quiet_modtag) $@
-cmd_cc_s_c = $(CC) $(c_flags) -S -o $@ $<
+cmd_cc_s_c = $(CC) $(c_flags) -fverbose-asm -S -o $@ $<
-%.s: %.c FORCE
+$(obj)/%.s: $(src)/%.c FORCE
$(call if_changed_dep,cc_s_c)
quiet_cmd_cc_i_c = CPP $(quiet_modtag) $@
cmd_cc_i_c = $(CPP) $(c_flags) -o $@ $<
-%.i: %.c FORCE
+$(obj)/%.i: $(src)/%.c FORCE
$(call if_changed_dep,cc_i_c)
+cmd_gensymtypes = \
+ $(CPP) -D__GENKSYMS__ $(c_flags) $< | \
+ $(GENKSYMS) -T $@ -a $(ARCH) \
+ $(if $(KBUILD_PRESERVE),-p) \
+ $(if $(1),-r $(firstword $(wildcard $(@:.symtypes=.symref) /dev/null)))
+
+quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
+cmd_cc_symtypes_c = \
+ set -e; \
+ $(call cmd_gensymtypes, true) >/dev/null; \
+ test -s $@ || rm -f $@
+
+$(obj)/%.symtypes : $(src)/%.c FORCE
+ $(call cmd,cc_symtypes_c)
+
# C (.c) files
# The C file is compiled and updated dependency information is generated.
# (See cmd_cc_o_c + relevant part of rule_cc_o_c)
cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $<
cmd_modversions = \
if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then \
- $(CPP) -D__GENKSYMS__ $(c_flags) $< \
- | $(GENKSYMS) \
- > $(@D)/.tmp_$(@F:.o=.ver); \
+ $(call cmd_gensymtypes, $(KBUILD_SYMTYPES)) \
+ > $(@D)/.tmp_$(@F:.o=.ver); \
\
$(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \
-T $(@D)/.tmp_$(@F:.o=.ver); \
fi;
endif
+ifdef CONFIG_FTRACE_MCOUNT_RECORD
+cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
+ "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \
+ "$(if $(CONFIG_64BIT),64,32)" \
+ "$(OBJDUMP)" "$(OBJCOPY)" "$(CC)" "$(LD)" "$(NM)" "$(RM)" "$(MV)" \
+ "$(if $(part-of-module),1,0)" "$(@)";
+endif
+
define rule_cc_o_c
- $(if $($(quiet)cmd_checksrc),echo ' $($(quiet)cmd_checksrc)';) \
- $(cmd_checksrc) \
- $(if $($(quiet)cmd_cc_o_c),echo ' $(subst ','\'',$($(quiet)cmd_cc_o_c))';) \
- $(cmd_cc_o_c); \
+ $(call echo-cmd,checksrc) $(cmd_checksrc) \
+ $(call echo-cmd,cc_o_c) $(cmd_cc_o_c); \
$(cmd_modversions) \
- scripts/basic/fixdep $(depfile) $@ '$(subst ','\'',$(cmd_cc_o_c))' > $(@D)/.$(@F).tmp; \
+ $(call echo-cmd,record_mcount) \
+ $(cmd_record_mcount) \
+ scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' > \
+ $(dot-target).tmp; \
rm -f $(depfile); \
- mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd
+ mv -f $(dot-target).tmp $(dot-target).cmd
endef
# Built-in and composite module parts
-
-%.o: %.c FORCE
+$(obj)/%.o: $(src)/%.c FORCE
$(call cmd,force_checksrc)
$(call if_changed_rule,cc_o_c)
# Single-part modules are special since we need to mark them in $(MODVERDIR)
-$(single-used-m): %.o: %.c FORCE
+$(single-used-m): $(obj)/%.o: $(src)/%.c FORCE
$(call cmd,force_checksrc)
$(call if_changed_rule,cc_o_c)
@{ echo $(@:.o=.ko); echo $@; } > $(MODVERDIR)/$(@F:.o=.mod)
$(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \
System.map $(OBJDUMP) > $@
-%.lst: %.c FORCE
+$(obj)/%.lst: $(src)/%.c FORCE
$(call if_changed_dep,cc_lst_c)
# Compile assembler sources (.S)
quiet_cmd_as_s_S = CPP $(quiet_modtag) $@
cmd_as_s_S = $(CPP) $(a_flags) -o $@ $<
-%.s: %.S FORCE
+$(obj)/%.s: $(src)/%.S FORCE
$(call if_changed_dep,as_s_S)
quiet_cmd_as_o_S = AS $(quiet_modtag) $@
cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
-%.o: %.S FORCE
+$(obj)/%.o: $(src)/%.S FORCE
$(call if_changed_dep,as_o_S)
targets += $(real-objs-y) $(real-objs-m) $(lib-y)
# Linker scripts preprocessor (.lds.S -> .lds)
# ---------------------------------------------------------------------------
quiet_cmd_cpp_lds_S = LDS $@
- cmd_cpp_lds_S = $(CPP) $(cpp_flags) -D__ASSEMBLY__ -o $@ $<
+ cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \
+ -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
-%.lds: %.lds.S FORCE
+$(obj)/%.lds: $(src)/%.lds.S FORCE
$(call if_changed_dep,cpp_lds_S)
# Build the compiled-in targets
quiet_cmd_link_o_target = LD $@
# If the list of objects to link is empty, just create an empty built-in.o
cmd_link_o_target = $(if $(strip $(obj-y)),\
- $(LD) $(ld_flags) -r -o $@ $(filter $(obj-y), $^),\
+ $(LD) $(ld_flags) -r -o $@ $(filter $(obj-y), $^) \
+ $(cmd_secanalysis),\
rm -f $@; $(AR) rcs $@)
$(builtin-target): $(obj-y) FORCE
endif # builtin-target
#
+# Rule to create modules.order file
+#
+# Create commands to either record .ko file or cat modules.order from
+# a subdirectory
+modorder-cmds = \
+ $(foreach m, $(modorder), \
+ $(if $(filter %/modules.order, $m), \
+ cat $m;, echo kernel/$m;))
+
+$(modorder-target): $(subdir-ym) FORCE
+ $(Q)(cat /dev/null; $(modorder-cmds)) > $@
+
+#
# Rule to compile a set of .o files into one .a file
#
ifdef lib-target
quiet_cmd_link_l_target = AR $@
-cmd_link_l_target = rm -f $@; $(AR) $(EXTRA_ARFLAGS) rcs $@ $(lib-y)
+cmd_link_l_target = rm -f $@; $(AR) rcs $@ $(lib-y)
$(lib-target): $(lib-y) FORCE
$(call if_changed,link_l_target)
$($(subst $(obj)/,,$(@:.o=-y)))), $^)
quiet_cmd_link_multi-y = LD $@
-cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps)
+cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalysis)
quiet_cmd_link_multi-m = LD [M] $@
-cmd_link_multi-m = $(LD) $(ld_flags) $(LDFLAGS_MODULE) -o $@ $(link_multi_deps)
+cmd_link_multi-m = $(cmd_link_multi-y)
# We would rather have a list of rules like
# foo.o: $(foo-objs)
# Descending
# ---------------------------------------------------------------------------
-.PHONY: $(subdir-ym)
+PHONY += $(subdir-ym)
$(subdir-ym):
$(Q)$(MAKE) $(build)=$@
# Add FORCE to the prequisites of a target to force it to be always rebuilt.
# ---------------------------------------------------------------------------
-.PHONY: FORCE
+PHONY += FORCE
FORCE:
ifneq ($(cmd_files),)
include $(cmd_files)
endif
+
+
+# Declare the contents of the .PHONY variable as phony. We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff