* for faster lookup and a list for iteration. They are managed using
* RCU, i.e. access to the list and hash table is protected by RCU.
*
- * Upon allocating a STA info structure with sta_info_alloc(), the caller owns
- * that structure. It must then either destroy it using sta_info_destroy()
- * (which is pretty useless) or insert it into the hash table using
- * sta_info_insert() which demotes the reference from ownership to a regular
- * RCU-protected reference; if the function is called without protection by an
- * RCU critical section the reference is instantly invalidated. Note that the
- * caller may not do much with the STA info before inserting it, in particular,
- * it may not start any mesh peer link management or add encryption keys.
+ * Upon allocating a STA info structure with sta_info_alloc(), the caller
+ * owns that structure. It must then insert it into the hash table using
+ * either sta_info_insert() or sta_info_insert_rcu(); only in the latter
+ * case (which acquires an rcu read section but must not be called from
+ * within one) will the pointer still be valid after the call. Note that
+ * the caller may not do much with the STA info before inserting it, in
+ * particular, it may not start any mesh peer link management or add
+ * encryption keys.
*
* When the insertion fails (sta_info_insert()) returns non-zero), the
* structure will have been freed by sta_info_insert()!
*
- * sta entries are added by mac80211 when you establish a link with a
+ * Station entries are added by mac80211 when you establish a link with a
* peer. This means different things for the different type of interfaces
* we support. For a regular station this mean we add the AP sta when we
* receive an assocation response from the AP. For IBSS this occurs when
- * we receive a probe response or a beacon from target IBSS network. For
- * WDS we add the sta for the peer imediately upon device open. When using
- * AP mode we add stations for each respective station upon request from
- * userspace through nl80211.
+ * get to know about a peer on the same IBSS. For WDS we add the sta for
+ * the peer imediately upon device open. When using AP mode we add stations
+ * for each respective station upon request from userspace through nl80211.
*
- * Because there are debugfs entries for each station, and adding those
- * must be able to sleep, it is also possible to "pin" a station entry,
- * that means it can be removed from the hash table but not be freed.
- * See the comment in __sta_info_unlink() for more information, this is
- * an internal capability only.
+ * In order to remove a STA info structure, various sta_info_destroy_*()
+ * calls are available.
*
- * In order to remove a STA info structure, the caller needs to first
- * unlink it (sta_info_unlink()) from the list and hash tables and
- * then destroy it; sta_info_destroy() will wait for an RCU grace period
- * to elapse before actually freeing it. Due to the pinning and the
- * possibility of multiple callers trying to remove the same STA info at
- * the same time, sta_info_unlink() can clear the STA info pointer it is
- * passed to indicate that the STA info is owned by somebody else now.
- *
- * If sta_info_unlink() did not clear the pointer then the caller owns
- * the STA info structure now and is responsible of destroying it with
- * a call to sta_info_destroy().
- *
- * In all other cases, there is no concept of ownership on a STA entry,
- * each structure is owned by the global hash table/list until it is
- * removed. All users of the structure need to be RCU protected so that
- * the structure won't be freed before they are done using it.
+ * There is no concept of ownership on a STA entry, each structure is
+ * owned by the global hash table/list until it is removed. All users of
+ * the structure need to be RCU protected so that the structure won't be
+ * freed before they are done using it.
*/
/* Caller must hold local->sta_lock */
kfree(sta);
}
-void sta_info_destroy(struct sta_info *sta)
-{
- struct ieee80211_local *local;
- struct sk_buff *skb;
- int i;
-
- might_sleep();
-
- if (!sta)
- return;
-
- local = sta->local;
-
- cancel_work_sync(&sta->drv_unblock_wk);
-
- rate_control_remove_sta_debugfs(sta);
- ieee80211_sta_debugfs_remove(sta);
-
-#ifdef CONFIG_MAC80211_MESH
- if (ieee80211_vif_is_mesh(&sta->sdata->vif))
- mesh_plink_deactivate(sta);
-#endif
-
- /*
- * We have only unlinked the key, and actually destroying it
- * may mean it is removed from hardware which requires that
- * the key->sta pointer is still valid, so flush the key todo
- * list here.
- *
- * ieee80211_key_todo() will synchronize_rcu() so after this
- * nothing can reference this sta struct any more.
- */
- ieee80211_key_todo();
-
-#ifdef CONFIG_MAC80211_MESH
- if (ieee80211_vif_is_mesh(&sta->sdata->vif))
- del_timer_sync(&sta->plink_timer);
-#endif
-
- while ((skb = skb_dequeue(&sta->ps_tx_buf)) != NULL) {
- local->total_ps_buffered--;
- dev_kfree_skb_any(skb);
- }
-
- while ((skb = skb_dequeue(&sta->tx_filtered)) != NULL)
- dev_kfree_skb_any(skb);
-
- for (i = 0; i < STA_TID_NUM; i++) {
- struct tid_ampdu_rx *tid_rx;
- struct tid_ampdu_tx *tid_tx;
-
- spin_lock_bh(&sta->lock);
- tid_rx = sta->ampdu_mlme.tid_rx[i];
- /* Make sure timer won't free the tid_rx struct, see below */
- if (tid_rx)
- tid_rx->shutdown = true;
-
- spin_unlock_bh(&sta->lock);
-
- /*
- * Outside spinlock - shutdown is true now so that the timer
- * won't free tid_rx, we have to do that now. Can't let the
- * timer do it because we have to sync the timer outside the
- * lock that it takes itself.
- */
- if (tid_rx) {
- del_timer_sync(&tid_rx->session_timer);
- kfree(tid_rx);
- }
-
- /*
- * No need to do such complications for TX agg sessions, the
- * path leading to freeing the tid_tx struct goes via a call
- * from the driver, and thus needs to look up the sta struct
- * again, which cannot be found when we get here. Hence, we
- * just need to delete the timer and free the aggregation
- * info; we won't be telling the peer about it then but that
- * doesn't matter if we're not talking to it again anyway.
- */
- tid_tx = sta->ampdu_mlme.tid_tx[i];
- if (tid_tx) {
- del_timer_sync(&tid_tx->addba_resp_timer);
- /*
- * STA removed while aggregation session being
- * started? Bit odd, but purge frames anyway.
- */
- skb_queue_purge(&tid_tx->pending);
- kfree(tid_tx);
- }
- }
-
- __sta_info_free(local, sta);
-}
-
-
/* Caller must hold local->sta_lock */
static void sta_info_hash_add(struct ieee80211_local *local,
struct sta_info *sta)
return sta;
}
-int sta_info_insert(struct sta_info *sta)
+static int sta_info_finish_insert(struct sta_info *sta, bool async)
{
struct ieee80211_local *local = sta->local;
struct ieee80211_sub_if_data *sdata = sta->sdata;
unsigned long flags;
int err = 0;
+ WARN_ON(!mutex_is_locked(&local->sta_mtx));
+
+ /* notify driver */
+ if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+ sdata = container_of(sdata->bss,
+ struct ieee80211_sub_if_data,
+ u.ap);
+ err = drv_sta_add(local, sdata, &sta->sta);
+ if (err) {
+ if (!async)
+ return err;
+ printk(KERN_DEBUG "%s: failed to add IBSS STA %pM to driver (%d)"
+ " - keeping it anyway.\n",
+ sdata->name, sta->sta.addr, err);
+ } else {
+ sta->uploaded = true;
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ if (async)
+ printk(KERN_DEBUG "%s: Finished adding IBSS STA %pM\n",
+ wiphy_name(local->hw.wiphy), sta->sta.addr);
+#endif
+ }
+
+ sdata = sta->sdata;
+
+ if (!async) {
+ local->num_sta++;
+ local->sta_generation++;
+ smp_mb();
+
+ /* make the station visible */
+ spin_lock_irqsave(&local->sta_lock, flags);
+ sta_info_hash_add(local, sta);
+ spin_unlock_irqrestore(&local->sta_lock, flags);
+ }
+
+ list_add(&sta->list, &local->sta_list);
+
+ ieee80211_sta_debugfs_add(sta);
+ rate_control_add_sta_debugfs(sta);
+
+ sinfo.filled = 0;
+ sinfo.generation = local->sta_generation;
+ cfg80211_new_sta(sdata->dev, sta->sta.addr, &sinfo, GFP_KERNEL);
+
+
+ return 0;
+}
+
+static void sta_info_finish_pending(struct ieee80211_local *local)
+{
+ struct sta_info *sta;
+ unsigned long flags;
+
+ spin_lock_irqsave(&local->sta_lock, flags);
+ while (!list_empty(&local->sta_pending_list)) {
+ sta = list_first_entry(&local->sta_pending_list,
+ struct sta_info, list);
+ list_del(&sta->list);
+ spin_unlock_irqrestore(&local->sta_lock, flags);
+
+ sta_info_finish_insert(sta, true);
+
+ spin_lock_irqsave(&local->sta_lock, flags);
+ }
+ spin_unlock_irqrestore(&local->sta_lock, flags);
+}
+
+static void sta_info_finish_work(struct work_struct *work)
+{
+ struct ieee80211_local *local =
+ container_of(work, struct ieee80211_local, sta_finish_work);
+
+ mutex_lock(&local->sta_mtx);
+ sta_info_finish_pending(local);
+ mutex_unlock(&local->sta_mtx);
+}
+
+int sta_info_insert_rcu(struct sta_info *sta) __acquires(RCU)
+{
+ struct ieee80211_local *local = sta->local;
+ struct ieee80211_sub_if_data *sdata = sta->sdata;
+ unsigned long flags;
+ int err = 0;
+
/*
* Can't be a WARN_ON because it can be triggered through a race:
* something inserts a STA (on one CPU) without holding the RTNL
*/
if (unlikely(!ieee80211_sdata_running(sdata))) {
err = -ENETDOWN;
+ rcu_read_lock();
goto out_free;
}
if (WARN_ON(compare_ether_addr(sta->sta.addr, sdata->vif.addr) == 0 ||
is_multicast_ether_addr(sta->sta.addr))) {
err = -EINVAL;
+ rcu_read_lock();
goto out_free;
}
+ /*
+ * In ad-hoc mode, we sometimes need to insert stations
+ * from tasklet context from the RX path. To avoid races,
+ * always do so in that case -- see the comment below.
+ */
+ if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
+ spin_lock_irqsave(&local->sta_lock, flags);
+ /* check if STA exists already */
+ if (sta_info_get_bss(sdata, sta->sta.addr)) {
+ spin_unlock_irqrestore(&local->sta_lock, flags);
+ rcu_read_lock();
+ err = -EEXIST;
+ goto out_free;
+ }
+
+ local->num_sta++;
+ local->sta_generation++;
+ smp_mb();
+ sta_info_hash_add(local, sta);
+
+ list_add_tail(&sta->list, &local->sta_pending_list);
+
+ rcu_read_lock();
+ spin_unlock_irqrestore(&local->sta_lock, flags);
+
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ printk(KERN_DEBUG "%s: Added IBSS STA %pM\n",
+ wiphy_name(local->hw.wiphy), sta->sta.addr);
+#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
+
+ ieee80211_queue_work(&local->hw, &local->sta_finish_work);
+
+ return 0;
+ }
+
+ /*
+ * On first glance, this will look racy, because the code
+ * below this point, which inserts a station with sleeping,
+ * unlocks the sta_lock between checking existence in the
+ * hash table and inserting into it.
+ *
+ * However, it is not racy against itself because it keeps
+ * the mutex locked. It still seems to race against the
+ * above code that atomically inserts the station... That,
+ * however, is not true because the above code can only
+ * be invoked for IBSS interfaces, and the below code will
+ * not be -- and the two do not race against each other as
+ * the hash table also keys off the interface.
+ */
+
+ might_sleep();
+
+ mutex_lock(&local->sta_mtx);
+
spin_lock_irqsave(&local->sta_lock, flags);
/* check if STA exists already */
- if (sta_info_get(sdata, sta->sta.addr)) {
+ if (sta_info_get_bss(sdata, sta->sta.addr)) {
spin_unlock_irqrestore(&local->sta_lock, flags);
+ rcu_read_lock();
err = -EEXIST;
goto out_free;
}
- list_add(&sta->list, &local->sta_list);
- local->sta_generation++;
- local->num_sta++;
- sta_info_hash_add(local, sta);
- /* notify driver */
- if (local->ops->sta_notify) {
- if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
- sdata = container_of(sdata->bss,
- struct ieee80211_sub_if_data,
- u.ap);
+ spin_unlock_irqrestore(&local->sta_lock, flags);
- drv_sta_notify(local, sdata, STA_NOTIFY_ADD, &sta->sta);
- sdata = sta->sdata;
+ err = sta_info_finish_insert(sta, false);
+ if (err) {
+ mutex_unlock(&local->sta_mtx);
+ rcu_read_lock();
+ goto out_free;
}
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
wiphy_name(local->hw.wiphy), sta->sta.addr);
#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
- spin_unlock_irqrestore(&local->sta_lock, flags);
-
- sinfo.filled = 0;
- sinfo.generation = local->sta_generation;
- cfg80211_new_sta(sdata->dev, sta->sta.addr, &sinfo, GFP_ATOMIC);
-
-#ifdef CONFIG_MAC80211_DEBUGFS
- /*
- * Debugfs entry adding might sleep, so schedule process
- * context task for adding entry for STAs that do not yet
- * have one.
- * NOTE: due to auto-freeing semantics this may only be done
- * if the insertion is successful!
- */
- schedule_work(&local->sta_debugfs_add);
-#endif
+ /* move reference to rcu-protected */
+ rcu_read_lock();
+ mutex_unlock(&local->sta_mtx);
if (ieee80211_vif_is_mesh(&sdata->vif))
mesh_accept_plinks_update(sdata);
return err;
}
+int sta_info_insert(struct sta_info *sta)
+{
+ int err = sta_info_insert_rcu(sta);
+
+ rcu_read_unlock();
+
+ return err;
+}
+
static inline void __bss_tim_set(struct ieee80211_if_ap *bss, u16 aid)
{
/*
spin_unlock_irqrestore(&sta->local->sta_lock, flags);
}
-static void __sta_info_unlink(struct sta_info **sta)
-{
- struct ieee80211_local *local = (*sta)->local;
- struct ieee80211_sub_if_data *sdata = (*sta)->sdata;
- /*
- * pull caller's reference if we're already gone.
- */
- if (sta_info_hash_del(local, *sta)) {
- *sta = NULL;
- return;
- }
-
- if ((*sta)->key) {
- ieee80211_key_free((*sta)->key);
- WARN_ON((*sta)->key);
- }
-
- list_del(&(*sta)->list);
- (*sta)->dead = true;
-
- if (test_and_clear_sta_flags(*sta,
- WLAN_STA_PS_STA | WLAN_STA_PS_DRIVER)) {
- BUG_ON(!sdata->bss);
-
- atomic_dec(&sdata->bss->num_sta_ps);
- __sta_info_clear_tim_bit(sdata->bss, *sta);
- }
-
- local->num_sta--;
- local->sta_generation++;
-
- if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
- rcu_assign_pointer(sdata->u.vlan.sta, NULL);
-
- if (local->ops->sta_notify) {
- if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
- sdata = container_of(sdata->bss,
- struct ieee80211_sub_if_data,
- u.ap);
-
- drv_sta_notify(local, sdata, STA_NOTIFY_REMOVE,
- &(*sta)->sta);
- sdata = (*sta)->sdata;
- }
-
- if (ieee80211_vif_is_mesh(&sdata->vif)) {
- mesh_accept_plinks_update(sdata);
-#ifdef CONFIG_MAC80211_MESH
- del_timer(&(*sta)->plink_timer);
-#endif
- }
-
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- printk(KERN_DEBUG "%s: Removed STA %pM\n",
- wiphy_name(local->hw.wiphy), (*sta)->sta.addr);
-#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
-
- /*
- * Finally, pull caller's reference if the STA is pinned by the
- * task that is adding the debugfs entries. In that case, we
- * leave the STA "to be freed".
- *
- * The rules are not trivial, but not too complex either:
- * (1) pin_status is only modified under the sta_lock
- * (2) STAs may only be pinned under the RTNL so that
- * sta_info_flush() is guaranteed to actually destroy
- * all STAs that are active for a given interface, this
- * is required for correctness because otherwise we
- * could notify a driver that an interface is going
- * away and only after that (!) notify it about a STA
- * on that interface going away.
- * (3) sta_info_debugfs_add_work() will set the status
- * to PINNED when it found an item that needs a new
- * debugfs directory created. In that case, that item
- * must not be freed although all *RCU* users are done
- * with it. Hence, we tell the caller of _unlink()
- * that the item is already gone (as can happen when
- * two tasks try to unlink/destroy at the same time)
- * (4) We set the pin_status to DESTROY here when we
- * find such an item.
- * (5) sta_info_debugfs_add_work() will reset the pin_status
- * from PINNED to NORMAL when it is done with the item,
- * but will check for DESTROY before resetting it in
- * which case it will free the item.
- */
- if ((*sta)->pin_status == STA_INFO_PIN_STAT_PINNED) {
- (*sta)->pin_status = STA_INFO_PIN_STAT_DESTROY;
- *sta = NULL;
- return;
- }
-}
-
-void sta_info_unlink(struct sta_info **sta)
-{
- struct ieee80211_local *local = (*sta)->local;
- unsigned long flags;
-
- spin_lock_irqsave(&local->sta_lock, flags);
- __sta_info_unlink(sta);
- spin_unlock_irqrestore(&local->sta_lock, flags);
-}
-
static int sta_info_buffer_expired(struct sta_info *sta,
struct sk_buff *skb)
{
}
}
-
-static void sta_info_cleanup(unsigned long data)
+static int __must_check __sta_info_destroy(struct sta_info *sta)
{
- struct ieee80211_local *local = (struct ieee80211_local *) data;
- struct sta_info *sta;
+ struct ieee80211_local *local;
+ struct ieee80211_sub_if_data *sdata;
+ struct sk_buff *skb;
+ unsigned long flags;
+ int ret, i;
- rcu_read_lock();
- list_for_each_entry_rcu(sta, &local->sta_list, list)
- sta_info_cleanup_expire_buffered(local, sta);
- rcu_read_unlock();
+ might_sleep();
- if (local->quiescing)
- return;
+ if (!sta)
+ return -ENOENT;
- local->sta_cleanup.expires =
- round_jiffies(jiffies + STA_INFO_CLEANUP_INTERVAL);
- add_timer(&local->sta_cleanup);
-}
+ local = sta->local;
+ sdata = sta->sdata;
-#ifdef CONFIG_MAC80211_DEBUGFS
-/*
- * See comment in __sta_info_unlink,
- * caller must hold local->sta_lock.
- */
-static void __sta_info_pin(struct sta_info *sta)
-{
- WARN_ON(sta->pin_status != STA_INFO_PIN_STAT_NORMAL);
- sta->pin_status = STA_INFO_PIN_STAT_PINNED;
+ spin_lock_irqsave(&local->sta_lock, flags);
+ ret = sta_info_hash_del(local, sta);
+ /* this might still be the pending list ... which is fine */
+ if (!ret)
+ list_del(&sta->list);
+ spin_unlock_irqrestore(&local->sta_lock, flags);
+ if (ret)
+ return ret;
+
+ if (sta->key) {
+ ieee80211_key_free(sta->key);
+ /*
+ * We have only unlinked the key, and actually destroying it
+ * may mean it is removed from hardware which requires that
+ * the key->sta pointer is still valid, so flush the key todo
+ * list here.
+ *
+ * ieee80211_key_todo() will synchronize_rcu() so after this
+ * nothing can reference this sta struct any more.
+ */
+ ieee80211_key_todo();
+
+ WARN_ON(sta->key);
+ }
+
+ sta->dead = true;
+
+ if (test_and_clear_sta_flags(sta,
+ WLAN_STA_PS_STA | WLAN_STA_PS_DRIVER)) {
+ BUG_ON(!sdata->bss);
+
+ atomic_dec(&sdata->bss->num_sta_ps);
+ __sta_info_clear_tim_bit(sdata->bss, sta);
+ }
+
+ local->num_sta--;
+ local->sta_generation++;
+
+ if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+ rcu_assign_pointer(sdata->u.vlan.sta, NULL);
+
+ if (sta->uploaded) {
+ if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+ sdata = container_of(sdata->bss,
+ struct ieee80211_sub_if_data,
+ u.ap);
+ drv_sta_remove(local, sdata, &sta->sta);
+ sdata = sta->sdata;
+ }
+
+#ifdef CONFIG_MAC80211_MESH
+ if (ieee80211_vif_is_mesh(&sdata->vif)) {
+ mesh_accept_plinks_update(sdata);
+ del_timer(&sta->plink_timer);
+ }
+#endif
+
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ printk(KERN_DEBUG "%s: Removed STA %pM\n",
+ wiphy_name(local->hw.wiphy), sta->sta.addr);
+#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
+ cancel_work_sync(&sta->drv_unblock_wk);
+
+ rate_control_remove_sta_debugfs(sta);
+ ieee80211_sta_debugfs_remove(sta);
+
+#ifdef CONFIG_MAC80211_MESH
+ if (ieee80211_vif_is_mesh(&sta->sdata->vif)) {
+ mesh_plink_deactivate(sta);
+ del_timer_sync(&sta->plink_timer);
+ }
+#endif
+
+ while ((skb = skb_dequeue(&sta->ps_tx_buf)) != NULL) {
+ local->total_ps_buffered--;
+ dev_kfree_skb_any(skb);
+ }
+
+ while ((skb = skb_dequeue(&sta->tx_filtered)) != NULL)
+ dev_kfree_skb_any(skb);
+
+ for (i = 0; i < STA_TID_NUM; i++) {
+ struct tid_ampdu_rx *tid_rx;
+ struct tid_ampdu_tx *tid_tx;
+
+ spin_lock_bh(&sta->lock);
+ tid_rx = sta->ampdu_mlme.tid_rx[i];
+ /* Make sure timer won't free the tid_rx struct, see below */
+ if (tid_rx)
+ tid_rx->shutdown = true;
+
+ spin_unlock_bh(&sta->lock);
+
+ /*
+ * Outside spinlock - shutdown is true now so that the timer
+ * won't free tid_rx, we have to do that now. Can't let the
+ * timer do it because we have to sync the timer outside the
+ * lock that it takes itself.
+ */
+ if (tid_rx) {
+ del_timer_sync(&tid_rx->session_timer);
+ kfree(tid_rx);
+ }
+
+ /*
+ * No need to do such complications for TX agg sessions, the
+ * path leading to freeing the tid_tx struct goes via a call
+ * from the driver, and thus needs to look up the sta struct
+ * again, which cannot be found when we get here. Hence, we
+ * just need to delete the timer and free the aggregation
+ * info; we won't be telling the peer about it then but that
+ * doesn't matter if we're not talking to it again anyway.
+ */
+ tid_tx = sta->ampdu_mlme.tid_tx[i];
+ if (tid_tx) {
+ del_timer_sync(&tid_tx->addba_resp_timer);
+ /*
+ * STA removed while aggregation session being
+ * started? Bit odd, but purge frames anyway.
+ */
+ skb_queue_purge(&tid_tx->pending);
+ kfree(tid_tx);
+ }
+ }
+
+ __sta_info_free(local, sta);
+
+ return 0;
}
-/*
- * See comment in __sta_info_unlink, returns sta if it
- * needs to be destroyed.
- */
-static struct sta_info *__sta_info_unpin(struct sta_info *sta)
+int sta_info_destroy_addr(struct ieee80211_sub_if_data *sdata, const u8 *addr)
{
- struct sta_info *ret = NULL;
- unsigned long flags;
+ struct sta_info *sta;
+ int ret;
- spin_lock_irqsave(&sta->local->sta_lock, flags);
- WARN_ON(sta->pin_status != STA_INFO_PIN_STAT_DESTROY &&
- sta->pin_status != STA_INFO_PIN_STAT_PINNED);
- if (sta->pin_status == STA_INFO_PIN_STAT_DESTROY)
- ret = sta;
- sta->pin_status = STA_INFO_PIN_STAT_NORMAL;
- spin_unlock_irqrestore(&sta->local->sta_lock, flags);
+ mutex_lock(&sdata->local->sta_mtx);
+ sta = sta_info_get(sdata, addr);
+ ret = __sta_info_destroy(sta);
+ mutex_unlock(&sdata->local->sta_mtx);
return ret;
}
-static void sta_info_debugfs_add_work(struct work_struct *work)
+int sta_info_destroy_addr_bss(struct ieee80211_sub_if_data *sdata,
+ const u8 *addr)
{
- struct ieee80211_local *local =
- container_of(work, struct ieee80211_local, sta_debugfs_add);
- struct sta_info *sta, *tmp;
- unsigned long flags;
+ struct sta_info *sta;
+ int ret;
- /* We need to keep the RTNL across the whole pinned status. */
- rtnl_lock();
- while (1) {
- sta = NULL;
+ mutex_lock(&sdata->local->sta_mtx);
+ sta = sta_info_get_bss(sdata, addr);
+ ret = __sta_info_destroy(sta);
+ mutex_unlock(&sdata->local->sta_mtx);
- spin_lock_irqsave(&local->sta_lock, flags);
- list_for_each_entry(tmp, &local->sta_list, list) {
- /*
- * debugfs.add_has_run will be set by
- * ieee80211_sta_debugfs_add regardless
- * of what else it does.
- */
- if (!tmp->debugfs.add_has_run) {
- sta = tmp;
- __sta_info_pin(sta);
- break;
- }
- }
- spin_unlock_irqrestore(&local->sta_lock, flags);
+ return ret;
+}
- if (!sta)
- break;
+static void sta_info_cleanup(unsigned long data)
+{
+ struct ieee80211_local *local = (struct ieee80211_local *) data;
+ struct sta_info *sta;
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(sta, &local->sta_list, list)
+ sta_info_cleanup_expire_buffered(local, sta);
+ rcu_read_unlock();
- ieee80211_sta_debugfs_add(sta);
- rate_control_add_sta_debugfs(sta);
+ if (local->quiescing)
+ return;
- sta = __sta_info_unpin(sta);
- sta_info_destroy(sta);
- }
- rtnl_unlock();
+ local->sta_cleanup.expires =
+ round_jiffies(jiffies + STA_INFO_CLEANUP_INTERVAL);
+ add_timer(&local->sta_cleanup);
}
-#endif
void sta_info_init(struct ieee80211_local *local)
{
spin_lock_init(&local->sta_lock);
+ mutex_init(&local->sta_mtx);
INIT_LIST_HEAD(&local->sta_list);
+ INIT_LIST_HEAD(&local->sta_pending_list);
+ INIT_WORK(&local->sta_finish_work, sta_info_finish_work);
setup_timer(&local->sta_cleanup, sta_info_cleanup,
(unsigned long)local);
local->sta_cleanup.expires =
round_jiffies(jiffies + STA_INFO_CLEANUP_INTERVAL);
-
-#ifdef CONFIG_MAC80211_DEBUGFS
- INIT_WORK(&local->sta_debugfs_add, sta_info_debugfs_add_work);
-#endif
}
int sta_info_start(struct ieee80211_local *local)
void sta_info_stop(struct ieee80211_local *local)
{
del_timer(&local->sta_cleanup);
-#ifdef CONFIG_MAC80211_DEBUGFS
- /*
- * Make sure the debugfs adding work isn't pending after this
- * because we're about to be destroyed. It doesn't matter
- * whether it ran or not since we're going to flush all STAs
- * anyway.
- */
- cancel_work_sync(&local->sta_debugfs_add);
-#endif
-
sta_info_flush(local, NULL);
}
struct ieee80211_sub_if_data *sdata)
{
struct sta_info *sta, *tmp;
- LIST_HEAD(tmp_list);
int ret = 0;
- unsigned long flags;
might_sleep();
- spin_lock_irqsave(&local->sta_lock, flags);
+ mutex_lock(&local->sta_mtx);
+
+ sta_info_finish_pending(local);
+
list_for_each_entry_safe(sta, tmp, &local->sta_list, list) {
- if (!sdata || sdata == sta->sdata) {
- __sta_info_unlink(&sta);
- if (sta) {
- list_add_tail(&sta->list, &tmp_list);
- ret++;
- }
- }
+ if (!sdata || sdata == sta->sdata)
+ WARN_ON(__sta_info_destroy(sta));
}
- spin_unlock_irqrestore(&local->sta_lock, flags);
-
- list_for_each_entry_safe(sta, tmp, &tmp_list, list)
- sta_info_destroy(sta);
+ mutex_unlock(&local->sta_mtx);
return ret;
}
{
struct ieee80211_local *local = sdata->local;
struct sta_info *sta, *tmp;
- LIST_HEAD(tmp_list);
- unsigned long flags;
- spin_lock_irqsave(&local->sta_lock, flags);
+ mutex_lock(&local->sta_mtx);
list_for_each_entry_safe(sta, tmp, &local->sta_list, list)
if (time_after(jiffies, sta->last_rx + exp_time)) {
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG "%s: expiring inactive STA %pM\n",
sdata->name, sta->sta.addr);
#endif
- __sta_info_unlink(&sta);
- if (sta)
- list_add(&sta->list, &tmp_list);
+ WARN_ON(__sta_info_destroy(sta));
}
- spin_unlock_irqrestore(&local->sta_lock, flags);
-
- list_for_each_entry_safe(sta, tmp, &tmp_list, list)
- sta_info_destroy(sta);
+ mutex_unlock(&local->sta_mtx);
}
struct ieee80211_sta *ieee80211_find_sta_by_hw(struct ieee80211_hw *hw,
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff