* published by the Free Software Foundation.
*/
-/* TODO: figure out how to avoid that the "current BSS" expires */
-
-#include <linux/wireless.h>
#include <linux/if_arp.h>
#include <linux/rtnetlink.h>
+#include <linux/pm_qos_params.h>
+#include <net/sch_generic.h>
+#include <linux/slab.h>
#include <net/mac80211.h>
-#include <net/iw_handler.h>
#include "ieee80211_i.h"
#include "driver-ops.h"
ieee80211_rx_bss_get(struct ieee80211_local *local, u8 *bssid, int freq,
u8 *ssid, u8 ssid_len)
{
- return (void *)cfg80211_get_bss(local->hw.wiphy,
- ieee80211_get_channel(local->hw.wiphy,
- freq),
- bssid, ssid, ssid_len,
- 0, 0);
+ struct cfg80211_bss *cbss;
+
+ cbss = cfg80211_get_bss(local->hw.wiphy,
+ ieee80211_get_channel(local->hw.wiphy, freq),
+ bssid, ssid, ssid_len, 0, 0);
+ if (!cbss)
+ return NULL;
+ return (void *)cbss->priv;
}
static void ieee80211_rx_bss_free(struct cfg80211_bss *cbss)
{
- struct ieee80211_bss *bss = (void *)cbss;
+ struct ieee80211_bss *bss = (void *)cbss->priv;
kfree(bss_mesh_id(bss));
kfree(bss_mesh_cfg(bss));
void ieee80211_rx_bss_put(struct ieee80211_local *local,
struct ieee80211_bss *bss)
{
- cfg80211_put_bss((struct cfg80211_bss *)bss);
+ if (!bss)
+ return;
+ cfg80211_put_bss(container_of((void *)bss, struct cfg80211_bss, priv));
+}
+
+static bool is_uapsd_supported(struct ieee802_11_elems *elems)
+{
+ u8 qos_info;
+
+ if (elems->wmm_info && elems->wmm_info_len == 7
+ && elems->wmm_info[5] == 1)
+ qos_info = elems->wmm_info[6];
+ else if (elems->wmm_param && elems->wmm_param_len == 24
+ && elems->wmm_param[5] == 1)
+ qos_info = elems->wmm_param[6];
+ else
+ /* no valid wmm information or parameter element found */
+ return false;
+
+ return qos_info & IEEE80211_WMM_IE_AP_QOSINFO_UAPSD;
}
struct ieee80211_bss *
struct ieee80211_channel *channel,
bool beacon)
{
+ struct cfg80211_bss *cbss;
struct ieee80211_bss *bss;
- int clen;
+ int clen, srlen;
s32 signal = 0;
if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
signal = (rx_status->signal * 100) / local->hw.max_signal;
- bss = (void *)cfg80211_inform_bss_frame(local->hw.wiphy, channel,
- mgmt, len, signal, GFP_ATOMIC);
+ cbss = cfg80211_inform_bss_frame(local->hw.wiphy, channel,
+ mgmt, len, signal, GFP_ATOMIC);
- if (!bss)
+ if (!cbss)
return NULL;
- bss->cbss.free_priv = ieee80211_rx_bss_free;
+ cbss->free_priv = ieee80211_rx_bss_free;
+ bss = (void *)cbss->priv;
/* save the ERP value so that it is available at association time */
if (elems->erp_info && elems->erp_info_len >= 1) {
bss->dtim_period = tim_ie->dtim_period;
}
- /* set default value for buggy APs */
- if (!elems->tim || bss->dtim_period == 0)
- bss->dtim_period = 1;
-
- bss->supp_rates_len = 0;
+ /* replace old supported rates if we get new values */
+ srlen = 0;
if (elems->supp_rates) {
- clen = IEEE80211_MAX_SUPP_RATES - bss->supp_rates_len;
+ clen = IEEE80211_MAX_SUPP_RATES;
if (clen > elems->supp_rates_len)
clen = elems->supp_rates_len;
- memcpy(&bss->supp_rates[bss->supp_rates_len], elems->supp_rates,
- clen);
- bss->supp_rates_len += clen;
+ memcpy(bss->supp_rates, elems->supp_rates, clen);
+ srlen += clen;
}
if (elems->ext_supp_rates) {
- clen = IEEE80211_MAX_SUPP_RATES - bss->supp_rates_len;
+ clen = IEEE80211_MAX_SUPP_RATES - srlen;
if (clen > elems->ext_supp_rates_len)
clen = elems->ext_supp_rates_len;
- memcpy(&bss->supp_rates[bss->supp_rates_len],
- elems->ext_supp_rates, clen);
- bss->supp_rates_len += clen;
+ memcpy(bss->supp_rates + srlen, elems->ext_supp_rates, clen);
+ srlen += clen;
}
+ if (srlen)
+ bss->supp_rates_len = srlen;
bss->wmm_used = elems->wmm_param || elems->wmm_info;
+ bss->uapsd_supported = is_uapsd_supported(elems);
if (!beacon)
bss->last_probe_resp = jiffies;
presp = ieee80211_is_probe_resp(fc);
if (presp) {
/* ignore ProbeResp to foreign address */
- if (memcmp(mgmt->da, sdata->dev->dev_addr, ETH_ALEN))
+ if (memcmp(mgmt->da, sdata->vif.addr, ETH_ALEN))
return RX_DROP_MONITOR;
presp = true;
return RX_QUEUED;
}
-/*
- * inform AP that we will go to sleep so that it will buffer the frames
- * while we scan
- */
-static void ieee80211_scan_ps_enable(struct ieee80211_sub_if_data *sdata)
+/* return false if no more work */
+static bool ieee80211_prep_hw_scan(struct ieee80211_local *local)
{
- struct ieee80211_local *local = sdata->local;
- bool ps = false;
-
- /* FIXME: what to do when local->pspolling is true? */
-
- del_timer_sync(&local->dynamic_ps_timer);
- cancel_work_sync(&local->dynamic_ps_enable_work);
+ struct cfg80211_scan_request *req = local->scan_req;
+ enum ieee80211_band band;
+ int i, ielen, n_chans;
- if (local->hw.conf.flags & IEEE80211_CONF_PS) {
- ps = true;
- local->hw.conf.flags &= ~IEEE80211_CONF_PS;
- ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
- }
+ do {
+ if (local->hw_scan_band == IEEE80211_NUM_BANDS)
+ return false;
+
+ band = local->hw_scan_band;
+ n_chans = 0;
+ for (i = 0; i < req->n_channels; i++) {
+ if (req->channels[i]->band == band) {
+ local->hw_scan_req->channels[n_chans] =
+ req->channels[i];
+ n_chans++;
+ }
+ }
- if (!ps || !(local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK))
- /*
- * If power save was enabled, no need to send a nullfunc
- * frame because AP knows that we are sleeping. But if the
- * hardware is creating the nullfunc frame for power save
- * status (ie. IEEE80211_HW_PS_NULLFUNC_STACK is not
- * enabled) and power save was enabled, the firmware just
- * sent a null frame with power save disabled. So we need
- * to send a new nullfunc frame to inform the AP that we
- * are again sleeping.
- */
- ieee80211_send_nullfunc(local, sdata, 1);
-}
+ local->hw_scan_band++;
+ } while (!n_chans);
-/* inform AP that we are awake again, unless power save is enabled */
-static void ieee80211_scan_ps_disable(struct ieee80211_sub_if_data *sdata)
-{
- struct ieee80211_local *local = sdata->local;
+ local->hw_scan_req->n_channels = n_chans;
- if (!local->ps_sdata)
- ieee80211_send_nullfunc(local, sdata, 0);
- else {
- /*
- * In !IEEE80211_HW_PS_NULLFUNC_STACK case the hardware
- * will send a nullfunc frame with the powersave bit set
- * even though the AP already knows that we are sleeping.
- * This could be avoided by sending a null frame with power
- * save bit disabled before enabling the power save, but
- * this doesn't gain anything.
- *
- * When IEEE80211_HW_PS_NULLFUNC_STACK is enabled, no need
- * to send a nullfunc frame because AP already knows that
- * we are sleeping, let's just enable power save mode in
- * hardware.
- */
- local->hw.conf.flags |= IEEE80211_CONF_PS;
- ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
- }
-}
+ ielen = ieee80211_build_preq_ies(local, (u8 *)local->hw_scan_req->ie,
+ req->ie, req->ie_len, band);
+ local->hw_scan_req->ie_len = ielen;
-static void ieee80211_restore_scan_ies(struct ieee80211_local *local)
-{
- kfree(local->scan_req->ie);
- local->scan_req->ie = local->orig_ies;
- local->scan_req->ie_len = local->orig_ies_len;
+ return true;
}
void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
{
struct ieee80211_local *local = hw_to_local(hw);
- struct ieee80211_sub_if_data *sdata;
bool was_hw_scan;
+ trace_api_scan_completed(local, aborted);
+
mutex_lock(&local->scan_mtx);
- if (WARN_ON(!local->scanning)) {
+ /*
+ * It's ok to abort a not-yet-running scan (that
+ * we have one at all will be verified by checking
+ * local->scan_req next), but not to complete it
+ * successfully.
+ */
+ if (WARN_ON(!local->scanning && !aborted))
+ aborted = true;
+
+ if (WARN_ON(!local->scan_req)) {
mutex_unlock(&local->scan_mtx);
return;
}
- if (WARN_ON(!local->scan_req)) {
+ was_hw_scan = test_bit(SCAN_HW_SCANNING, &local->scanning);
+ if (was_hw_scan && !aborted && ieee80211_prep_hw_scan(local)) {
+ ieee80211_queue_delayed_work(&local->hw,
+ &local->scan_work, 0);
mutex_unlock(&local->scan_mtx);
return;
}
- if (test_bit(SCAN_HW_SCANNING, &local->scanning))
- ieee80211_restore_scan_ies(local);
+ kfree(local->hw_scan_req);
+ local->hw_scan_req = NULL;
- if (local->scan_req != &local->int_scan_req)
+ if (local->scan_req != local->int_scan_req)
cfg80211_scan_done(local->scan_req, aborted);
local->scan_req = NULL;
+ local->scan_sdata = NULL;
- was_hw_scan = test_bit(SCAN_HW_SCANNING, &local->scanning);
local->scanning = 0;
local->scan_channel = NULL;
if (was_hw_scan)
goto done;
- spin_lock_bh(&local->filter_lock);
- local->filter_flags &= ~FIF_BCN_PRBRESP_PROMISC;
- drv_configure_filter(local, FIF_BCN_PRBRESP_PROMISC,
- &local->filter_flags,
- local->mc_count,
- local->mc_list);
- spin_unlock_bh(&local->filter_lock);
+ ieee80211_configure_filter(local);
drv_sw_scan_complete(local);
- mutex_lock(&local->iflist_mtx);
- list_for_each_entry(sdata, &local->interfaces, list) {
- if (!netif_running(sdata->dev))
- continue;
-
- /* Tell AP we're back */
- if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- if (sdata->u.mgd.associated) {
- ieee80211_scan_ps_disable(sdata);
- netif_tx_wake_all_queues(sdata->dev);
- }
- } else
- netif_tx_wake_all_queues(sdata->dev);
-
- /* re-enable beaconing */
- if (sdata->vif.type == NL80211_IFTYPE_AP ||
- sdata->vif.type == NL80211_IFTYPE_ADHOC ||
- sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
- ieee80211_bss_info_change_notify(
- sdata, BSS_CHANGED_BEACON_ENABLED);
- }
- mutex_unlock(&local->iflist_mtx);
+ ieee80211_offchannel_return(local, true);
done:
ieee80211_recalc_idle(local);
ieee80211_mlme_notify_scan_completed(local);
ieee80211_ibss_notify_scan_completed(local);
ieee80211_mesh_notify_scan_completed(local);
+ ieee80211_queue_work(&local->hw, &local->work_work);
}
EXPORT_SYMBOL(ieee80211_scan_completed);
static int ieee80211_start_sw_scan(struct ieee80211_local *local)
{
- struct ieee80211_sub_if_data *sdata;
-
/*
* Hardware/driver doesn't support hw_scan, so use software
* scanning instead. First send a nullfunc frame with power save
*/
drv_sw_scan_start(local);
- mutex_lock(&local->iflist_mtx);
- list_for_each_entry(sdata, &local->interfaces, list) {
- if (!netif_running(sdata->dev))
- continue;
-
- /* disable beaconing */
- if (sdata->vif.type == NL80211_IFTYPE_AP ||
- sdata->vif.type == NL80211_IFTYPE_ADHOC ||
- sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
- ieee80211_bss_info_change_notify(
- sdata, BSS_CHANGED_BEACON_ENABLED);
-
- /*
- * only handle non-STA interfaces here, STA interfaces
- * are handled in the scan state machine
- */
- if (sdata->vif.type != NL80211_IFTYPE_STATION)
- netif_tx_stop_all_queues(sdata->dev);
- }
- mutex_unlock(&local->iflist_mtx);
+ ieee80211_offchannel_stop_beaconing(local);
+ local->leave_oper_channel_time = 0;
local->next_scan_state = SCAN_DECISION;
local->scan_channel_idx = 0;
- spin_lock_bh(&local->filter_lock);
- local->filter_flags |= FIF_BCN_PRBRESP_PROMISC;
- drv_configure_filter(local, FIF_BCN_PRBRESP_PROMISC,
- &local->filter_flags,
- local->mc_count,
- local->mc_list);
- spin_unlock_bh(&local->filter_lock);
+ drv_flush(local, false);
+
+ ieee80211_configure_filter(local);
- /* TODO: start scan as soon as all nullfunc frames are ACKed */
- queue_delayed_work(local->hw.workqueue, &local->scan_work,
- IEEE80211_CHANNEL_TIME);
+ ieee80211_queue_delayed_work(&local->hw,
+ &local->scan_work,
+ IEEE80211_CHANNEL_TIME);
return 0;
}
struct cfg80211_scan_request *req)
{
struct ieee80211_local *local = sdata->local;
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
int rc;
if (local->scan_req)
return -EBUSY;
+ if (!list_empty(&local->work_list)) {
+ /* wait for the work to finish/time out */
+ local->scan_req = req;
+ local->scan_sdata = sdata;
+ return 0;
+ }
+
if (local->ops->hw_scan) {
u8 *ies;
- int ielen;
- ies = kmalloc(2 + IEEE80211_MAX_SSID_LEN +
- local->scan_ies_len + req->ie_len, GFP_KERNEL);
- if (!ies)
+ local->hw_scan_req = kmalloc(
+ sizeof(*local->hw_scan_req) +
+ req->n_channels * sizeof(req->channels[0]) +
+ 2 + IEEE80211_MAX_SSID_LEN + local->scan_ies_len +
+ req->ie_len, GFP_KERNEL);
+ if (!local->hw_scan_req)
return -ENOMEM;
- ielen = ieee80211_build_preq_ies(local, ies,
- req->ie, req->ie_len);
- local->orig_ies = req->ie;
- local->orig_ies_len = req->ie_len;
- req->ie = ies;
- req->ie_len = ielen;
+ local->hw_scan_req->ssids = req->ssids;
+ local->hw_scan_req->n_ssids = req->n_ssids;
+ ies = (u8 *)local->hw_scan_req +
+ sizeof(*local->hw_scan_req) +
+ req->n_channels * sizeof(req->channels[0]);
+ local->hw_scan_req->ie = ies;
+
+ local->hw_scan_band = 0;
+
+ /*
+ * After allocating local->hw_scan_req, we must
+ * go through until ieee80211_prep_hw_scan(), so
+ * anything that might be changed here and leave
+ * this function early must not go after this
+ * allocation.
+ */
}
local->scan_req = req;
local->scan_sdata = sdata;
- if (req != &local->int_scan_req &&
- sdata->vif.type == NL80211_IFTYPE_STATION &&
- !list_empty(&ifmgd->work_list)) {
- /* actually wait for the work it's doing to finish/time out */
- set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request);
- return 0;
- }
-
if (local->ops->hw_scan)
__set_bit(SCAN_HW_SCANNING, &local->scanning);
else
__set_bit(SCAN_SW_SCANNING, &local->scanning);
+
/*
* Kicking off the scan need not be protected,
* only the scan variable stuff, since now
* local->scan_req is assigned and other callers
* will abort their scan attempts.
*
- * This avoids getting a scan_mtx -> iflist_mtx
- * dependency, so that the scan completed calls
- * have more locking freedom.
+ * This avoids too many locking dependencies
+ * so that the scan completed calls have more
+ * locking freedom.
*/
ieee80211_recalc_idle(local);
mutex_unlock(&local->scan_mtx);
- if (local->ops->hw_scan)
- rc = drv_hw_scan(local, local->scan_req);
- else
+ if (local->ops->hw_scan) {
+ WARN_ON(!ieee80211_prep_hw_scan(local));
+ rc = drv_hw_scan(local, sdata, local->hw_scan_req);
+ } else
rc = ieee80211_start_sw_scan(local);
mutex_lock(&local->scan_mtx);
if (rc) {
- if (local->ops->hw_scan)
- ieee80211_restore_scan_ies(local);
+ kfree(local->hw_scan_req);
+ local->hw_scan_req = NULL;
local->scanning = 0;
ieee80211_recalc_idle(local);
return rc;
}
+static unsigned long
+ieee80211_scan_get_channel_time(struct ieee80211_channel *chan)
+{
+ /*
+ * TODO: channel switching also consumes quite some time,
+ * add that delay as well to get a better estimation
+ */
+ if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)
+ return IEEE80211_PASSIVE_CHANNEL_TIME;
+ return IEEE80211_PROBE_DELAY + IEEE80211_CHANNEL_TIME;
+}
+
static int ieee80211_scan_state_decision(struct ieee80211_local *local,
unsigned long *next_delay)
{
bool associated = false;
+ bool tx_empty = true;
+ bool bad_latency;
+ bool listen_int_exceeded;
+ unsigned long min_beacon_int = 0;
struct ieee80211_sub_if_data *sdata;
+ struct ieee80211_channel *next_chan;
/* if no more bands/channels left, complete scan and advance to the idle state */
if (local->scan_channel_idx >= local->scan_req->n_channels) {
return 1;
}
- /* check if at least one STA interface is associated */
+ /*
+ * check if at least one STA interface is associated,
+ * check if at least one STA interface has pending tx frames
+ * and grab the lowest used beacon interval
+ */
mutex_lock(&local->iflist_mtx);
list_for_each_entry(sdata, &local->interfaces, list) {
- if (!netif_running(sdata->dev))
+ if (!ieee80211_sdata_running(sdata))
continue;
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
if (sdata->u.mgd.associated) {
associated = true;
- break;
+
+ if (sdata->vif.bss_conf.beacon_int <
+ min_beacon_int || min_beacon_int == 0)
+ min_beacon_int =
+ sdata->vif.bss_conf.beacon_int;
+
+ if (!qdisc_all_tx_empty(sdata->dev)) {
+ tx_empty = false;
+ break;
+ }
}
}
}
if (local->scan_channel) {
/*
* we're currently scanning a different channel, let's
- * switch back to the operating channel now if at least
- * one interface is associated. Otherwise just scan the
- * next channel
+ * see if we can scan another channel without interfering
+ * with the current traffic situation.
+ *
+ * Since we don't know if the AP has pending frames for us
+ * we can only check for our tx queues and use the current
+ * pm_qos requirements for rx. Hence, if no tx traffic occurs
+ * at all we will scan as many channels in a row as the pm_qos
+ * latency allows us to. Additionally we also check for the
+ * currently negotiated listen interval to prevent losing
+ * frames unnecessarily.
+ *
+ * Otherwise switch back to the operating channel.
*/
- if (associated)
+ next_chan = local->scan_req->channels[local->scan_channel_idx];
+
+ bad_latency = time_after(jiffies +
+ ieee80211_scan_get_channel_time(next_chan),
+ local->leave_oper_channel_time +
+ usecs_to_jiffies(pm_qos_request(PM_QOS_NETWORK_LATENCY)));
+
+ listen_int_exceeded = time_after(jiffies +
+ ieee80211_scan_get_channel_time(next_chan),
+ local->leave_oper_channel_time +
+ usecs_to_jiffies(min_beacon_int * 1024) *
+ local->hw.conf.listen_interval);
+
+ if (associated && ( !tx_empty || bad_latency ||
+ listen_int_exceeded))
local->next_scan_state = SCAN_ENTER_OPER_CHANNEL;
else
local->next_scan_state = SCAN_SET_CHANNEL;
static void ieee80211_scan_state_leave_oper_channel(struct ieee80211_local *local,
unsigned long *next_delay)
{
- struct ieee80211_sub_if_data *sdata;
+ ieee80211_offchannel_stop_station(local);
+
+ __set_bit(SCAN_OFF_CHANNEL, &local->scanning);
/*
- * notify the AP about us leaving the channel and stop all STA interfaces
+ * What if the nullfunc frames didn't arrive?
*/
- mutex_lock(&local->iflist_mtx);
- list_for_each_entry(sdata, &local->interfaces, list) {
- if (!netif_running(sdata->dev))
- continue;
-
- if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- netif_tx_stop_all_queues(sdata->dev);
- if (sdata->u.mgd.associated)
- ieee80211_scan_ps_enable(sdata);
- }
- }
- mutex_unlock(&local->iflist_mtx);
+ drv_flush(local, false);
+ if (local->ops->flush)
+ *next_delay = 0;
+ else
+ *next_delay = HZ / 10;
- __set_bit(SCAN_OFF_CHANNEL, &local->scanning);
+ /* remember when we left the operating channel */
+ local->leave_oper_channel_time = jiffies;
/* advance to the next channel to be scanned */
- *next_delay = HZ / 10;
local->next_scan_state = SCAN_SET_CHANNEL;
}
static void ieee80211_scan_state_enter_oper_channel(struct ieee80211_local *local,
unsigned long *next_delay)
{
- struct ieee80211_sub_if_data *sdata = local->scan_sdata;
-
/* switch back to the operating channel */
local->scan_channel = NULL;
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
/*
- * notify the AP about us being back and restart all STA interfaces
+ * Only re-enable station mode interface now; beaconing will be
+ * re-enabled once the full scan has been completed.
*/
- mutex_lock(&local->iflist_mtx);
- list_for_each_entry(sdata, &local->interfaces, list) {
- if (!netif_running(sdata->dev))
- continue;
-
- /* Tell AP we're back */
- if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- if (sdata->u.mgd.associated)
- ieee80211_scan_ps_disable(sdata);
- netif_tx_wake_all_queues(sdata->dev);
- }
- }
- mutex_unlock(&local->iflist_mtx);
+ ieee80211_offchannel_return(local, false);
__clear_bit(SCAN_OFF_CHANNEL, &local->scanning);
{
int skip;
struct ieee80211_channel *chan;
- struct ieee80211_sub_if_data *sdata = local->scan_sdata;
skip = 0;
chan = local->scan_req->channels[local->scan_channel_idx];
- if (chan->flags & IEEE80211_CHAN_DISABLED ||
- (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
- chan->flags & IEEE80211_CHAN_NO_IBSS))
+ local->scan_channel = chan;
+ if (ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL))
skip = 1;
- if (!skip) {
- local->scan_channel = chan;
- if (ieee80211_hw_config(local,
- IEEE80211_CONF_CHANGE_CHANNEL))
- skip = 1;
- }
-
/* advance state machine to next channel/band */
local->scan_channel_idx++;
- if (skip)
+ if (skip) {
+ /* if we skip this channel return to the decision state */
+ local->next_scan_state = SCAN_DECISION;
return;
+ }
/*
* Probe delay is used to update the NAV, cf. 11.1.3.2.2
return;
}
+ if (local->hw_scan_req) {
+ int rc = drv_hw_scan(local, sdata, local->hw_scan_req);
+ mutex_unlock(&local->scan_mtx);
+ if (rc)
+ ieee80211_scan_completed(&local->hw, true);
+ return;
+ }
+
if (local->scan_req && !local->scanning) {
struct cfg80211_scan_request *req = local->scan_req;
int rc;
local->scan_req = NULL;
+ local->scan_sdata = NULL;
rc = __ieee80211_start_scan(sdata, req);
mutex_unlock(&local->scan_mtx);
/*
* Avoid re-scheduling when the sdata is going away.
*/
- if (!netif_running(sdata->dev)) {
+ if (!ieee80211_sdata_running(sdata)) {
ieee80211_scan_completed(&local->hw, true);
return;
}
}
} while (next_delay == 0);
- queue_delayed_work(local->hw.workqueue, &local->scan_work,
- next_delay);
+ ieee80211_queue_delayed_work(&local->hw, &local->scan_work, next_delay);
}
int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata,
}
int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata,
- const u8 *ssid, u8 ssid_len)
+ const u8 *ssid, u8 ssid_len,
+ struct ieee80211_channel *chan)
{
struct ieee80211_local *local = sdata->local;
int ret = -EBUSY;
+ enum nl80211_band band;
mutex_lock(&local->scan_mtx);
if (local->scan_req)
goto unlock;
- memcpy(local->int_scan_req.ssids[0].ssid, ssid, IEEE80211_MAX_SSID_LEN);
- local->int_scan_req.ssids[0].ssid_len = ssid_len;
+ /* fill internal scan request */
+ if (!chan) {
+ int i, nchan = 0;
+
+ for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+ if (!local->hw.wiphy->bands[band])
+ continue;
+ for (i = 0;
+ i < local->hw.wiphy->bands[band]->n_channels;
+ i++) {
+ local->int_scan_req->channels[nchan] =
+ &local->hw.wiphy->bands[band]->channels[i];
+ nchan++;
+ }
+ }
+
+ local->int_scan_req->n_channels = nchan;
+ } else {
+ local->int_scan_req->channels[0] = chan;
+ local->int_scan_req->n_channels = 1;
+ }
+
+ local->int_scan_req->ssids = &local->scan_ssid;
+ local->int_scan_req->n_ssids = 1;
+ memcpy(local->int_scan_req->ssids[0].ssid, ssid, IEEE80211_MAX_SSID_LEN);
+ local->int_scan_req->ssids[0].ssid_len = ssid_len;
- ret = __ieee80211_start_scan(sdata, &sdata->local->int_scan_req);
+ ret = __ieee80211_start_scan(sdata, sdata->local->int_scan_req);
unlock:
mutex_unlock(&local->scan_mtx);
return ret;
void ieee80211_scan_cancel(struct ieee80211_local *local)
{
- bool swscan;
+ bool abortscan;
cancel_delayed_work_sync(&local->scan_work);
* queued -- mostly at suspend under RTNL.
*/
mutex_lock(&local->scan_mtx);
- swscan = test_bit(SCAN_SW_SCANNING, &local->scanning);
+ abortscan = test_bit(SCAN_SW_SCANNING, &local->scanning) ||
+ (!local->scanning && local->scan_req);
mutex_unlock(&local->scan_mtx);
- if (swscan)
+ if (abortscan)
ieee80211_scan_completed(&local->hw, true);
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff