#include "mesh.h"
#include "led.h"
+/**
+ * DOC: Interface list locking
+ *
+ * The interface list in each struct ieee80211_local is protected
+ * three-fold:
+ *
+ * (1) modifications may only be done under the RTNL
+ * (2) modifications and readers are protected against each other by
+ * the iflist_mtx.
+ * (3) modifications are done in an RCU manner so atomic readers
+ * can traverse the list in RCU-safe blocks.
+ *
+ * As a consequence, reads (traversals) of the list can be protected
+ * by either the RTNL, the iflist_mtx or RCU.
+ */
+
+
static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
{
int meshhdrlen;
break;
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
- sdata->u.sta.flags &= ~IEEE80211_STA_PREV_BSSID_SET;
+ if (sdata->vif.type == NL80211_IFTYPE_STATION)
+ sdata->u.mgd.flags &= ~IEEE80211_STA_PREV_BSSID_SET;
+ else
+ sdata->u.ibss.flags &= ~IEEE80211_IBSS_PREV_BSSID_SET;
/* fall through */
default:
conf.vif = &sdata->vif;
* yet be effective. Trigger execution of ieee80211_sta_work
* to fix this.
*/
- if (sdata->vif.type == NL80211_IFTYPE_STATION ||
- sdata->vif.type == NL80211_IFTYPE_ADHOC) {
- struct ieee80211_if_sta *ifsta = &sdata->u.sta;
- queue_work(local->hw.workqueue, &ifsta->work);
- }
+ if (sdata->vif.type == NL80211_IFTYPE_STATION)
+ queue_work(local->hw.workqueue, &sdata->u.mgd.work);
+ else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+ queue_work(local->hw.workqueue, &sdata->u.ibss.work);
netif_tx_start_all_queues(dev);
list_for_each_entry_rcu(sta, &local->sta_list, list) {
if (sta->sdata == sdata)
- ieee80211_sta_tear_down_BA_sessions(sdata,
- sta->sta.addr);
+ ieee80211_sta_tear_down_BA_sessions(sta);
}
rcu_read_unlock();
/*
+ * Announce that we are leaving the network, in case we are a
+ * station interface type. This must be done before removing
+ * all stations associated with sta_info_flush, otherwise STA
+ * information will be gone and no announce being done.
+ */
+ if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+ if (sdata->u.mgd.state != IEEE80211_STA_MLME_DISABLED)
+ ieee80211_sta_deauthenticate(sdata,
+ WLAN_REASON_DEAUTH_LEAVING);
+ }
+
+ /*
* Remove all stations associated with this interface.
*
* This must be done before calling ops->remove_interface()
atomic_dec(&local->iff_promiscs);
dev_mc_unsync(local->mdev, dev);
+ del_timer_sync(&local->dynamic_ps_timer);
+ cancel_work_sync(&local->dynamic_ps_enable_work);
/* APs need special treatment */
if (sdata->vif.type == NL80211_IFTYPE_AP) {
netif_addr_unlock_bh(local->mdev);
break;
case NL80211_IFTYPE_STATION:
- case NL80211_IFTYPE_ADHOC:
- sdata->u.sta.state = IEEE80211_STA_MLME_DISABLED;
- memset(sdata->u.sta.bssid, 0, ETH_ALEN);
- del_timer_sync(&sdata->u.sta.timer);
+ memset(sdata->u.mgd.bssid, 0, ETH_ALEN);
+ del_timer_sync(&sdata->u.mgd.chswitch_timer);
+ del_timer_sync(&sdata->u.mgd.timer);
/*
* If the timer fired while we waited for it, it will have
* requeued the work. Now the work will be running again
* whether the interface is running, which, at this point,
* it no longer is.
*/
- cancel_work_sync(&sdata->u.sta.work);
+ cancel_work_sync(&sdata->u.mgd.work);
+ cancel_work_sync(&sdata->u.mgd.chswitch_work);
/*
* When we get here, the interface is marked down.
* Call synchronize_rcu() to wait for the RX path
* frames at this very time on another CPU.
*/
synchronize_rcu();
- skb_queue_purge(&sdata->u.sta.skb_queue);
+ skb_queue_purge(&sdata->u.mgd.skb_queue);
- sdata->u.sta.flags &= ~IEEE80211_STA_PRIVACY_INVOKED;
- kfree(sdata->u.sta.extra_ie);
- sdata->u.sta.extra_ie = NULL;
- sdata->u.sta.extra_ie_len = 0;
+ sdata->u.mgd.flags &= ~(IEEE80211_STA_PRIVACY_INVOKED |
+ IEEE80211_STA_TKIP_WEP_USED);
+ kfree(sdata->u.mgd.extra_ie);
+ sdata->u.mgd.extra_ie = NULL;
+ sdata->u.mgd.extra_ie_len = 0;
+ /* fall through */
+ case NL80211_IFTYPE_ADHOC:
+ if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
+ memset(sdata->u.ibss.bssid, 0, ETH_ALEN);
+ del_timer_sync(&sdata->u.ibss.timer);
+ cancel_work_sync(&sdata->u.ibss.work);
+ synchronize_rcu();
+ skb_queue_purge(&sdata->u.ibss.skb_queue);
+ }
/* fall through */
case NL80211_IFTYPE_MESH_POINT:
if (ieee80211_vif_is_mesh(&sdata->vif)) {
* scan event to userspace -- the scan is incomplete.
*/
if (local->sw_scanning)
- ieee80211_scan_completed(&local->hw);
+ ieee80211_scan_completed(&local->hw, true);
}
conf.vif = &sdata->vif;
dev_mc_sync(local->mdev, dev);
}
-static void ieee80211_if_setup(struct net_device *dev)
-{
- ether_setup(dev);
- dev->hard_start_xmit = ieee80211_subif_start_xmit;
- dev->wireless_handlers = &ieee80211_iw_handler_def;
- dev->set_multicast_list = ieee80211_set_multicast_list;
- dev->change_mtu = ieee80211_change_mtu;
- dev->open = ieee80211_open;
- dev->stop = ieee80211_stop;
- dev->destructor = free_netdev;
- /* we will validate the address ourselves in ->open */
- dev->validate_addr = NULL;
-}
/*
* Called when the netdev is removed or, by the code below, before
* the interface type changes.
if (ieee80211_vif_is_mesh(&sdata->vif))
mesh_rmc_free(sdata);
break;
- case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
- kfree(sdata->u.sta.extra_ie);
- kfree(sdata->u.sta.assocreq_ies);
- kfree(sdata->u.sta.assocresp_ies);
- kfree_skb(sdata->u.sta.probe_resp);
+ kfree_skb(sdata->u.ibss.probe_resp);
+ break;
+ case NL80211_IFTYPE_STATION:
+ kfree(sdata->u.mgd.extra_ie);
+ kfree(sdata->u.mgd.assocreq_ies);
+ kfree(sdata->u.mgd.assocresp_ies);
+ kfree(sdata->u.mgd.sme_auth_ie);
break;
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_AP_VLAN:
WARN_ON(flushed);
}
+static const struct net_device_ops ieee80211_dataif_ops = {
+ .ndo_open = ieee80211_open,
+ .ndo_stop = ieee80211_stop,
+ .ndo_uninit = ieee80211_teardown_sdata,
+ .ndo_start_xmit = ieee80211_subif_start_xmit,
+ .ndo_set_multicast_list = ieee80211_set_multicast_list,
+ .ndo_change_mtu = ieee80211_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+};
+
+static const struct net_device_ops ieee80211_monitorif_ops = {
+ .ndo_open = ieee80211_open,
+ .ndo_stop = ieee80211_stop,
+ .ndo_uninit = ieee80211_teardown_sdata,
+ .ndo_start_xmit = ieee80211_monitor_start_xmit,
+ .ndo_set_multicast_list = ieee80211_set_multicast_list,
+ .ndo_change_mtu = ieee80211_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+};
+
+static void ieee80211_if_setup(struct net_device *dev)
+{
+ ether_setup(dev);
+ dev->netdev_ops = &ieee80211_dataif_ops;
+ dev->wireless_handlers = &ieee80211_iw_handler_def;
+ dev->destructor = free_netdev;
+}
+
/*
* Helper function to initialise an interface to a specific type.
*/
/* and set some type-dependent values */
sdata->vif.type = type;
- sdata->dev->hard_start_xmit = ieee80211_subif_start_xmit;
+ sdata->dev->netdev_ops = &ieee80211_dataif_ops;
sdata->wdev.iftype = type;
/* only monitor differs */
INIT_LIST_HEAD(&sdata->u.ap.vlans);
break;
case NL80211_IFTYPE_STATION:
- case NL80211_IFTYPE_ADHOC:
ieee80211_sta_setup_sdata(sdata);
break;
+ case NL80211_IFTYPE_ADHOC:
+ ieee80211_ibss_setup_sdata(sdata);
+ break;
case NL80211_IFTYPE_MESH_POINT:
if (ieee80211_vif_is_mesh(&sdata->vif))
ieee80211_mesh_init_sdata(sdata);
break;
case NL80211_IFTYPE_MONITOR:
sdata->dev->type = ARPHRD_IEEE80211_RADIOTAP;
- sdata->dev->hard_start_xmit = ieee80211_monitor_start_xmit;
+ sdata->dev->netdev_ops = &ieee80211_monitorif_ops;
sdata->u.mntr_flags = MONITOR_FLAG_CONTROL |
MONITOR_FLAG_OTHER_BSS;
break;
if (type == sdata->vif.type)
return 0;
+ /* Setting ad-hoc mode on non-IBSS channel is not supported. */
+ if (sdata->local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS &&
+ type == NL80211_IFTYPE_ADHOC)
+ return -EOPNOTSUPP;
+
/*
* We could, here, on changes between IBSS/STA/MESH modes,
* invoke an MLME function instead that disassociates etc.
memcpy(ndev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
+ ndev->features |= NETIF_F_NETNS_LOCAL;
/* don't use IEEE80211_DEV_TO_SUB_IF because it checks too much */
sdata = netdev_priv(ndev);
if (ret)
goto fail;
- ndev->uninit = ieee80211_teardown_sdata;
-
if (ieee80211_vif_is_mesh(&sdata->vif) &&
params && params->mesh_id_len)
ieee80211_sdata_set_mesh_id(sdata,
params->mesh_id_len,
params->mesh_id);
+ mutex_lock(&local->iflist_mtx);
list_add_tail_rcu(&sdata->list, &local->interfaces);
+ mutex_unlock(&local->iflist_mtx);
if (new_dev)
*new_dev = ndev;
{
ASSERT_RTNL();
+ mutex_lock(&sdata->local->iflist_mtx);
list_del_rcu(&sdata->list);
+ mutex_unlock(&sdata->local->iflist_mtx);
+
synchronize_rcu();
unregister_netdevice(sdata->dev);
}
ASSERT_RTNL();
list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) {
+ /*
+ * we cannot hold the iflist_mtx across unregister_netdevice,
+ * but we only need to hold it for list modifications to lock
+ * out readers since we're under the RTNL here as all other
+ * writers.
+ */
+ mutex_lock(&local->iflist_mtx);
list_del(&sdata->list);
+ mutex_unlock(&local->iflist_mtx);
+
unregister_netdevice(sdata->dev);
}
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff