#include <linux/rcupdate.h>
#include <net/cfg80211.h>
#include "ieee80211_i.h"
+#include "driver-ops.h"
#include "cfg.h"
#include "rate.h"
#include "mesh.h"
return 0;
}
-static int ieee80211_del_iface(struct wiphy *wiphy, int ifindex)
+static int ieee80211_del_iface(struct wiphy *wiphy, struct net_device *dev)
{
- struct net_device *dev;
- struct ieee80211_sub_if_data *sdata;
-
- /* we're under RTNL */
- dev = __dev_get_by_index(&init_net, ifindex);
- if (!dev)
- return -ENODEV;
-
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
- ieee80211_if_remove(sdata);
+ ieee80211_if_remove(IEEE80211_DEV_TO_SUB_IF(dev));
return 0;
}
-static int ieee80211_change_iface(struct wiphy *wiphy, int ifindex,
+static int ieee80211_change_iface(struct wiphy *wiphy,
+ struct net_device *dev,
enum nl80211_iftype type, u32 *flags,
struct vif_params *params)
{
- struct net_device *dev;
struct ieee80211_sub_if_data *sdata;
int ret;
- /* we're under RTNL */
- dev = __dev_get_by_index(&init_net, ifindex);
- if (!dev)
- return -ENODEV;
+ if (netif_running(dev))
+ return -EBUSY;
if (!nl80211_type_check(type))
return -EINVAL;
if (ret)
return ret;
- if (netif_running(sdata->dev))
- return -EBUSY;
-
if (ieee80211_vif_is_mesh(&sdata->vif) && params->mesh_id_len)
ieee80211_sdata_set_mesh_id(sdata,
params->mesh_id_len,
}
static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
- u8 key_idx, u8 *mac_addr,
+ u8 key_idx, const u8 *mac_addr,
struct key_params *params)
{
struct ieee80211_sub_if_data *sdata;
return -EINVAL;
}
- key = ieee80211_key_alloc(alg, key_idx, params->key_len, params->key);
+ key = ieee80211_key_alloc(alg, key_idx, params->key_len, params->key,
+ params->seq_len, params->seq);
if (!key)
return -ENOMEM;
}
static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev,
- u8 key_idx, u8 *mac_addr)
+ u8 key_idx, const u8 *mac_addr)
{
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta;
}
static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
- u8 key_idx, u8 *mac_addr, void *cookie,
+ u8 key_idx, const u8 *mac_addr, void *cookie,
void (*callback)(void *cookie,
struct key_params *params))
{
iv32 = key->u.tkip.tx.iv32;
iv16 = key->u.tkip.tx.iv16;
- if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE &&
- sdata->local->ops->get_tkip_seq)
- sdata->local->ops->get_tkip_seq(
- local_to_hw(sdata->local),
- key->conf.hw_key_idx,
- &iv32, &iv16);
+ if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)
+ drv_get_tkip_seq(sdata->local,
+ key->conf.hw_key_idx,
+ &iv32, &iv16);
seq[0] = iv16 & 0xff;
seq[1] = (iv16 >> 8) & 0xff;
{
struct ieee80211_sub_if_data *sdata = sta->sdata;
+ sinfo->generation = sdata->local->sta_generation;
+
sinfo->filled = STATION_INFO_INACTIVE_TIME |
STATION_INFO_RX_BYTES |
STATION_INFO_TX_BYTES |
+ STATION_INFO_RX_PACKETS |
+ STATION_INFO_TX_PACKETS |
STATION_INFO_TX_BITRATE;
sinfo->inactive_time = jiffies_to_msecs(jiffies - sta->last_rx);
sinfo->rx_bytes = sta->rx_bytes;
sinfo->tx_bytes = sta->tx_bytes;
+ sinfo->rx_packets = sta->rx_packets;
+ sinfo->tx_packets = sta->tx_packets;
if (sta->local->hw.flags & IEEE80211_HW_SIGNAL_DBM) {
sinfo->filled |= STATION_INFO_SIGNAL;
* This is a kludge. beacon interval should really be part
* of the beacon information.
*/
- if (params->interval) {
- sdata->local->hw.conf.beacon_int = params->interval;
- err = ieee80211_hw_config(sdata->local,
- IEEE80211_CONF_CHANGE_BEACON_INTERVAL);
- if (err < 0)
- return err;
- /*
- * We updated some parameter so if below bails out
- * it's not an error.
- */
- err = 0;
+ if (params->interval &&
+ (sdata->vif.bss_conf.beacon_int != params->interval)) {
+ sdata->vif.bss_conf.beacon_int = params->interval;
+ ieee80211_bss_info_change_notify(sdata,
+ BSS_CHANGED_BEACON_INT);
}
/* Need to have a beacon head if we don't have one yet */
kfree(old);
- return ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON |
- IEEE80211_IFCC_BEACON_ENABLED);
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED |
+ BSS_CHANGED_BEACON);
+ return 0;
}
static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev,
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- if (sdata->vif.type != NL80211_IFTYPE_AP)
- return -EINVAL;
-
old = sdata->u.ap.beacon;
if (old)
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- if (sdata->vif.type != NL80211_IFTYPE_AP)
- return -EINVAL;
-
old = sdata->u.ap.beacon;
if (!old)
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- if (sdata->vif.type != NL80211_IFTYPE_AP)
- return -EINVAL;
-
old = sdata->u.ap.beacon;
if (!old)
synchronize_rcu();
kfree(old);
- return ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON_ENABLED);
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
+ return 0;
}
/* Layer 2 Update frame (802.2 Type 1 LLC XID Update response) */
int i, j;
struct ieee80211_supported_band *sband;
struct ieee80211_sub_if_data *sdata = sta->sdata;
+ u32 mask, set;
sband = local->hw.wiphy->bands[local->oper_channel->band];
- /*
- * FIXME: updating the flags is racy when this function is
- * called from ieee80211_change_station(), this will
- * be resolved in a future patch.
- */
+ spin_lock_bh(&sta->lock);
+ mask = params->sta_flags_mask;
+ set = params->sta_flags_set;
- if (params->station_flags & STATION_FLAG_CHANGED) {
- spin_lock_bh(&sta->lock);
+ if (mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) {
sta->flags &= ~WLAN_STA_AUTHORIZED;
- if (params->station_flags & STATION_FLAG_AUTHORIZED)
+ if (set & BIT(NL80211_STA_FLAG_AUTHORIZED))
sta->flags |= WLAN_STA_AUTHORIZED;
+ }
+ if (mask & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE)) {
sta->flags &= ~WLAN_STA_SHORT_PREAMBLE;
- if (params->station_flags & STATION_FLAG_SHORT_PREAMBLE)
+ if (set & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE))
sta->flags |= WLAN_STA_SHORT_PREAMBLE;
+ }
+ if (mask & BIT(NL80211_STA_FLAG_WME)) {
sta->flags &= ~WLAN_STA_WME;
- if (params->station_flags & STATION_FLAG_WME)
+ if (set & BIT(NL80211_STA_FLAG_WME))
sta->flags |= WLAN_STA_WME;
+ }
+ if (mask & BIT(NL80211_STA_FLAG_MFP)) {
sta->flags &= ~WLAN_STA_MFP;
- if (params->station_flags & STATION_FLAG_MFP)
+ if (set & BIT(NL80211_STA_FLAG_MFP))
sta->flags |= WLAN_STA_MFP;
- spin_unlock_bh(&sta->lock);
}
+ spin_unlock_bh(&sta->lock);
+
+ /*
+ * cfg80211 validates this (1-2007) and allows setting the AID
+ * only when creating a new station entry
+ */
+ if (params->aid)
+ sta->sta.aid = params->aid;
/*
* FIXME: updating the following information is racy when this
* maybe we should just reject attemps to change it.
*/
- if (params->aid) {
- sta->sta.aid = params->aid;
- if (sta->sta.aid > IEEE80211_MAX_AID)
- sta->sta.aid = 0; /* XXX: should this be an error? */
- }
-
if (params->listen_interval >= 0)
sta->listen_interval = params->listen_interval;
int err;
int layer2_update;
- /* Prevent a race with changing the rate control algorithm */
- if (!netif_running(dev))
- return -ENETDOWN;
-
if (params->vlan) {
sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
struct sta_info *sta;
int err;
- if (!netif_running(dev))
- return -ENETDOWN;
-
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- if (sdata->vif.type != NL80211_IFTYPE_MESH_POINT)
- return -ENOTSUPP;
-
rcu_read_lock();
sta = sta_info_get(local, next_hop);
if (!sta) {
struct mesh_path *mpath;
struct sta_info *sta;
- if (!netif_running(dev))
- return -ENETDOWN;
-
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- if (sdata->vif.type != NL80211_IFTYPE_MESH_POINT)
- return -ENOTSUPP;
-
rcu_read_lock();
sta = sta_info_get(local, next_hop);
else
memset(next_hop, 0, ETH_ALEN);
+ pinfo->generation = mesh_paths_generation;
+
pinfo->filled = MPATH_INFO_FRAME_QLEN |
MPATH_INFO_DSN |
MPATH_INFO_METRIC |
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- if (sdata->vif.type != NL80211_IFTYPE_MESH_POINT)
- return -ENOTSUPP;
-
rcu_read_lock();
mpath = mesh_path_lookup(dst, sdata);
if (!mpath) {
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- if (sdata->vif.type != NL80211_IFTYPE_MESH_POINT)
- return -ENOTSUPP;
-
rcu_read_lock();
mpath = mesh_path_lookup_by_idx(idx, sdata);
if (!mpath) {
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- if (sdata->vif.type != NL80211_IFTYPE_MESH_POINT)
- return -ENOTSUPP;
memcpy(conf, &(sdata->u.mesh.mshcfg), sizeof(struct mesh_config));
return 0;
}
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- if (sdata->vif.type != NL80211_IFTYPE_MESH_POINT)
- return -ENOTSUPP;
-
/* Set the config options which we are interested in setting */
conf = &(sdata->u.mesh.mshcfg);
if (_chg_mesh_attr(NL80211_MESHCONF_RETRY_TIMEOUT, mask))
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- if (sdata->vif.type != NL80211_IFTYPE_AP)
- return -EINVAL;
-
if (params->use_cts_prot >= 0) {
sdata->vif.bss_conf.use_cts_prot = params->use_cts_prot;
changed |= BSS_CHANGED_ERP_CTS_PROT;
p.cw_max = params->cwmax;
p.cw_min = params->cwmin;
p.txop = params->txop;
- if (local->ops->conf_tx(local_to_hw(local), params->queue, &p)) {
+ if (drv_conf_tx(local, params->queue, &p)) {
printk(KERN_DEBUG "%s: failed to set TX queue "
- "parameters for queue %d\n", local->mdev->name,
- params->queue);
+ "parameters for queue %d\n",
+ wiphy_name(local->hw.wiphy), params->queue);
return -EINVAL;
}
return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
}
-static int set_mgmt_extra_ie_sta(struct ieee80211_sub_if_data *sdata,
- u8 subtype, u8 *ies, size_t ies_len)
-{
- struct ieee80211_local *local = sdata->local;
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
-
- switch (subtype) {
- case IEEE80211_STYPE_PROBE_REQ >> 4:
- if (local->ops->hw_scan)
- break;
- kfree(ifmgd->ie_probereq);
- ifmgd->ie_probereq = ies;
- ifmgd->ie_probereq_len = ies_len;
- return 0;
- case IEEE80211_STYPE_PROBE_RESP >> 4:
- kfree(ifmgd->ie_proberesp);
- ifmgd->ie_proberesp = ies;
- ifmgd->ie_proberesp_len = ies_len;
- return 0;
- case IEEE80211_STYPE_AUTH >> 4:
- kfree(ifmgd->ie_auth);
- ifmgd->ie_auth = ies;
- ifmgd->ie_auth_len = ies_len;
- return 0;
- case IEEE80211_STYPE_ASSOC_REQ >> 4:
- kfree(ifmgd->ie_assocreq);
- ifmgd->ie_assocreq = ies;
- ifmgd->ie_assocreq_len = ies_len;
- return 0;
- case IEEE80211_STYPE_REASSOC_REQ >> 4:
- kfree(ifmgd->ie_reassocreq);
- ifmgd->ie_reassocreq = ies;
- ifmgd->ie_reassocreq_len = ies_len;
- return 0;
- case IEEE80211_STYPE_DEAUTH >> 4:
- kfree(ifmgd->ie_deauth);
- ifmgd->ie_deauth = ies;
- ifmgd->ie_deauth_len = ies_len;
- return 0;
- case IEEE80211_STYPE_DISASSOC >> 4:
- kfree(ifmgd->ie_disassoc);
- ifmgd->ie_disassoc = ies;
- ifmgd->ie_disassoc_len = ies_len;
- return 0;
- }
-
- return -EOPNOTSUPP;
-}
-
-static int ieee80211_set_mgmt_extra_ie(struct wiphy *wiphy,
- struct net_device *dev,
- struct mgmt_extra_ie_params *params)
-{
- struct ieee80211_sub_if_data *sdata;
- u8 *ies;
- size_t ies_len;
- int ret = -EOPNOTSUPP;
-
- if (params->ies) {
- ies = kmemdup(params->ies, params->ies_len, GFP_KERNEL);
- if (ies == NULL)
- return -ENOMEM;
- ies_len = params->ies_len;
- } else {
- ies = NULL;
- ies_len = 0;
- }
-
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
- switch (sdata->vif.type) {
- case NL80211_IFTYPE_STATION:
- ret = set_mgmt_extra_ie_sta(sdata, params->subtype,
- ies, ies_len);
- break;
- default:
- ret = -EOPNOTSUPP;
- break;
- }
-
- if (ret)
- kfree(ies);
- return ret;
-}
-
#ifdef CONFIG_PM
static int ieee80211_suspend(struct wiphy *wiphy)
{
{
struct ieee80211_sub_if_data *sdata;
- if (!netif_running(dev))
- return -ENETDOWN;
-
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type != NL80211_IFTYPE_STATION &&
sdata->vif.type != NL80211_IFTYPE_ADHOC &&
- sdata->vif.type != NL80211_IFTYPE_MESH_POINT)
+ sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
+ (sdata->vif.type != NL80211_IFTYPE_AP || sdata->u.ap.beacon))
return -EOPNOTSUPP;
return ieee80211_request_scan(sdata, req);
}
+static int ieee80211_auth(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_auth_request *req)
+{
+ return ieee80211_mgd_auth(IEEE80211_DEV_TO_SUB_IF(dev), req);
+}
+
+static int ieee80211_assoc(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_assoc_request *req)
+{
+ return ieee80211_mgd_assoc(IEEE80211_DEV_TO_SUB_IF(dev), req);
+}
+
+static int ieee80211_deauth(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_deauth_request *req,
+ void *cookie)
+{
+ return ieee80211_mgd_deauth(IEEE80211_DEV_TO_SUB_IF(dev),
+ req, cookie);
+}
+
+static int ieee80211_disassoc(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_disassoc_request *req,
+ void *cookie)
+{
+ return ieee80211_mgd_disassoc(IEEE80211_DEV_TO_SUB_IF(dev),
+ req, cookie);
+}
+
+static int ieee80211_join_ibss(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_ibss_params *params)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+ return ieee80211_ibss_join(sdata, params);
+}
+
+static int ieee80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+ return ieee80211_ibss_leave(sdata);
+}
+
+static int ieee80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
+{
+ struct ieee80211_local *local = wiphy_priv(wiphy);
+ int err;
+
+ if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
+ err = drv_set_rts_threshold(local, wiphy->rts_threshold);
+
+ if (err)
+ return err;
+ }
+
+ if (changed & WIPHY_PARAM_RETRY_SHORT)
+ local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
+ if (changed & WIPHY_PARAM_RETRY_LONG)
+ local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
+ if (changed &
+ (WIPHY_PARAM_RETRY_SHORT | WIPHY_PARAM_RETRY_LONG))
+ ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_RETRY_LIMITS);
+
+ return 0;
+}
+
+static int ieee80211_set_tx_power(struct wiphy *wiphy,
+ enum tx_power_setting type, int dbm)
+{
+ struct ieee80211_local *local = wiphy_priv(wiphy);
+ struct ieee80211_channel *chan = local->hw.conf.channel;
+ u32 changes = 0;
+
+ switch (type) {
+ case TX_POWER_AUTOMATIC:
+ local->user_power_level = -1;
+ break;
+ case TX_POWER_LIMITED:
+ if (dbm < 0)
+ return -EINVAL;
+ local->user_power_level = dbm;
+ break;
+ case TX_POWER_FIXED:
+ if (dbm < 0)
+ return -EINVAL;
+ /* TODO: move to cfg80211 when it knows the channel */
+ if (dbm > chan->max_power)
+ return -EINVAL;
+ local->user_power_level = dbm;
+ break;
+ }
+
+ ieee80211_hw_config(local, changes);
+
+ return 0;
+}
+
+static int ieee80211_get_tx_power(struct wiphy *wiphy, int *dbm)
+{
+ struct ieee80211_local *local = wiphy_priv(wiphy);
+
+ *dbm = local->hw.conf.power_level;
+
+ return 0;
+}
+
+static int ieee80211_set_wds_peer(struct wiphy *wiphy, struct net_device *dev,
+ u8 *addr)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+ memcpy(&sdata->u.wds.remote_addr, addr, ETH_ALEN);
+
+ return 0;
+}
+
+static void ieee80211_rfkill_poll(struct wiphy *wiphy)
+{
+ struct ieee80211_local *local = wiphy_priv(wiphy);
+
+ drv_rfkill_poll(local);
+}
+
+#ifdef CONFIG_NL80211_TESTMODE
+static int ieee80211_testmode_cmd(struct wiphy *wiphy, void *data, int len)
+{
+ struct ieee80211_local *local = wiphy_priv(wiphy);
+
+ if (!local->ops->testmode_cmd)
+ return -EOPNOTSUPP;
+
+ return local->ops->testmode_cmd(&local->hw, data, len);
+}
+#endif
+
+static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev,
+ bool enabled, int timeout)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_conf *conf = &local->hw.conf;
+
+ if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS))
+ return -EOPNOTSUPP;
+
+ if (enabled == sdata->u.mgd.powersave &&
+ timeout == conf->dynamic_ps_timeout)
+ return 0;
+
+ sdata->u.mgd.powersave = enabled;
+ conf->dynamic_ps_timeout = timeout;
+
+ if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)
+ ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+
+ ieee80211_recalc_ps(local, -1);
+
+ return 0;
+}
+
+static int ieee80211_set_bitrate_mask(struct wiphy *wiphy,
+ struct net_device *dev,
+ const u8 *addr,
+ const struct cfg80211_bitrate_mask *mask)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ int i, err = -EINVAL;
+ u32 target_rate;
+ struct ieee80211_supported_band *sband;
+
+ sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+
+ /* target_rate = -1, rate->fixed = 0 means auto only, so use all rates
+ * target_rate = X, rate->fixed = 1 means only rate X
+ * target_rate = X, rate->fixed = 0 means all rates <= X */
+ sdata->max_ratectrl_rateidx = -1;
+ sdata->force_unicast_rateidx = -1;
+
+ if (mask->fixed)
+ target_rate = mask->fixed / 100;
+ else if (mask->maxrate)
+ target_rate = mask->maxrate / 100;
+ else
+ return 0;
+
+ for (i=0; i< sband->n_bitrates; i++) {
+ struct ieee80211_rate *brate = &sband->bitrates[i];
+ int this_rate = brate->bitrate;
+
+ if (target_rate == this_rate) {
+ sdata->max_ratectrl_rateidx = i;
+ if (mask->fixed)
+ sdata->force_unicast_rateidx = i;
+ err = 0;
+ break;
+ }
+ }
+
+ return err;
+}
+
struct cfg80211_ops mac80211_config_ops = {
.add_virtual_intf = ieee80211_add_iface,
.del_virtual_intf = ieee80211_del_iface,
.change_bss = ieee80211_change_bss,
.set_txq_params = ieee80211_set_txq_params,
.set_channel = ieee80211_set_channel,
- .set_mgmt_extra_ie = ieee80211_set_mgmt_extra_ie,
.suspend = ieee80211_suspend,
.resume = ieee80211_resume,
.scan = ieee80211_scan,
+ .auth = ieee80211_auth,
+ .assoc = ieee80211_assoc,
+ .deauth = ieee80211_deauth,
+ .disassoc = ieee80211_disassoc,
+ .join_ibss = ieee80211_join_ibss,
+ .leave_ibss = ieee80211_leave_ibss,
+ .set_wiphy_params = ieee80211_set_wiphy_params,
+ .set_tx_power = ieee80211_set_tx_power,
+ .get_tx_power = ieee80211_get_tx_power,
+ .set_wds_peer = ieee80211_set_wds_peer,
+ .rfkill_poll = ieee80211_rfkill_poll,
+ CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd)
+ .set_power_mgmt = ieee80211_set_power_mgmt,
+ .set_bitrate_mask = ieee80211_set_bitrate_mask,
};
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff