menu "IP: Netfilter Configuration"
depends on INET && NETFILTER
-# connection tracking, helpers and protocols
-config IP_NF_CONNTRACK
- tristate "Connection tracking (required for masq/NAT)"
+config NF_DEFRAG_IPV4
+ tristate
+ default n
+
+config NF_CONNTRACK_IPV4
+ tristate "IPv4 connection tracking support (required for NAT)"
+ depends on NF_CONNTRACK
+ default m if NETFILTER_ADVANCED=n
+ select NF_DEFRAG_IPV4
---help---
Connection tracking keeps a record of what packets have passed
through your machine, in order to figure out how they are related
into connections.
- This is required to do Masquerading or other kinds of Network
- Address Translation (except for Fast NAT). It can also be used to
- enhance packet filtering (see `Connection state match support'
- below).
+ This is IPv4 support on Layer 3 independent connection tracking.
+ Layer 3 independent connection tracking is experimental scheme
+ which generalize ip_conntrack to support other layer 3 protocols.
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_CT_ACCT
- bool "Connection tracking flow accounting"
- depends on IP_NF_CONNTRACK
- help
- If this option is enabled, the connection tracking code will
- keep per-flow packet and byte counters.
-
- Those counters can be used for flow-based accounting or the
- `connbytes' match.
-
- If unsure, say `N'.
-
-config IP_NF_CONNTRACK_MARK
- bool 'Connection mark tracking support'
- help
- This option enables support for connection marks, used by the
- `CONNMARK' target and `connmark' match. Similar to the mark value
- of packets, but this mark value is kept in the conntrack session
- instead of the individual packets.
-
-config IP_NF_CONNTRACK_EVENTS
- bool "Connection tracking events"
- depends on IP_NF_CONNTRACK
- help
- If this option is enabled, the connection tracking code will
- provide a notifier chain that can be used by other kernel code
- to get notified about changes in the connection tracking state.
-
- IF unsure, say `N'.
-
-config IP_NF_CT_PROTO_SCTP
- tristate 'SCTP protocol connection tracking support (EXPERIMENTAL)'
- depends on IP_NF_CONNTRACK && EXPERIMENTAL
- help
- With this option enabled, the connection tracking code will
- be able to do state tracking on SCTP connections.
-
- If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
-
-config IP_NF_FTP
- tristate "FTP protocol support"
- depends on IP_NF_CONNTRACK
- help
- Tracking FTP connections is problematic: special helpers are
- required for tracking them, and doing masquerading and other forms
- of Network Address Translation on them.
-
- To compile it as a module, choose M here. If unsure, say Y.
-
-config IP_NF_IRC
- tristate "IRC protocol support"
- depends on IP_NF_CONNTRACK
- ---help---
- There is a commonly-used extension to IRC called
- Direct Client-to-Client Protocol (DCC). This enables users to send
- files to each other, and also chat to each other without the need
- of a server. DCC Sending is used anywhere you send files over IRC,
- and DCC Chat is most commonly used by Eggdrop bots. If you are
- using NAT, this extension will enable you to send files and initiate
- chats. Note that you do NOT need this extension to get files or
- have others initiate chats, or everything else in IRC.
-
- To compile it as a module, choose M here. If unsure, say Y.
-
-config IP_NF_TFTP
- tristate "TFTP protocol support"
- depends on IP_NF_CONNTRACK
- help
- TFTP connection tracking helper, this is required depending
- on how restrictive your ruleset is.
- If you are using a tftp client behind -j SNAT or -j MASQUERADING
- you will need this.
-
- To compile it as a module, choose M here. If unsure, say Y.
-
-config IP_NF_AMANDA
- tristate "Amanda backup protocol support"
- depends on IP_NF_CONNTRACK
+config NF_CONNTRACK_PROC_COMPAT
+ bool "proc/sysctl compatibility with old connection tracking"
+ depends on NF_CONNTRACK_IPV4
+ default y
help
- If you are running the Amanda backup package <http://www.amanda.org/>
- on this machine or machines that will be MASQUERADED through this
- machine, then you may want to enable this feature. This allows the
- connection tracking and natting code to allow the sub-channels that
- Amanda requires for communication of the backup data, messages and
- index.
+ This option enables /proc and sysctl compatibility with the old
+ layer 3 dependent connection tracking. This is needed to keep
+ old programs that have not been adapted to the new names working.
- To compile it as a module, choose M here. If unsure, say Y.
+ If unsure, say Y.
config IP_NF_QUEUE
tristate "IP Userspace queueing via NETLINK (OBSOLETE)"
+ depends on NETFILTER_ADVANCED
help
Netfilter has the ability to queue packets to user space: the
netlink device can be used to access them using this driver.
config IP_NF_IPTABLES
tristate "IP tables support (required for filtering/masq/NAT)"
+ default m if NETFILTER_ADVANCED=n
+ select NETFILTER_XTABLES
help
iptables is a general, extensible packet identification framework.
The packet filtering and full NAT (masquerading, port forwarding,
To compile it as a module, choose M here. If unsure, say N.
-# The matches.
-config IP_NF_MATCH_LIMIT
- tristate "limit match support"
- depends on IP_NF_IPTABLES
- help
- limit matching allows you to control the rate at which a rule can be
- matched: mainly useful in combination with the LOG target ("LOG
- target support", below) and to avoid some Denial of Service attacks.
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_MATCH_IPRANGE
- tristate "IP range match support"
- depends on IP_NF_IPTABLES
- help
- This option makes possible to match IP addresses against IP address
- ranges.
+if IP_NF_IPTABLES
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_MATCH_MAC
- tristate "MAC address match support"
- depends on IP_NF_IPTABLES
- help
- MAC matching allows you to match packets based on the source
- Ethernet address of the packet.
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_MATCH_PKTTYPE
- tristate "Packet type match support"
- depends on IP_NF_IPTABLES
- help
- Packet type matching allows you to match a packet by
- its "class", eg. BROADCAST, MULTICAST, ...
-
- Typical usage:
- iptables -A INPUT -m pkttype --pkt-type broadcast -j LOG
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_MATCH_MARK
- tristate "netfilter MARK match support"
- depends on IP_NF_IPTABLES
- help
- Netfilter mark matching allows you to match packets based on the
- `nfmark' value in the packet. This can be set by the MARK target
- (see below).
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_MATCH_MULTIPORT
- tristate "Multiple port match support"
- depends on IP_NF_IPTABLES
- help
- Multiport matching allows you to match TCP or UDP packets based on
- a series of source or destination ports: normally a rule can only
- match a single range of ports.
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_MATCH_TOS
- tristate "TOS match support"
- depends on IP_NF_IPTABLES
+# The matches.
+config IP_NF_MATCH_ADDRTYPE
+ tristate '"addrtype" address type match support'
+ depends on NETFILTER_ADVANCED
help
- TOS matching allows you to match packets based on the Type Of
- Service fields of the IP packet.
+ This option allows you to match what routing thinks of an address,
+ eg. UNICAST, LOCAL, BROADCAST, ...
- To compile it as a module, choose M here. If unsure, say N.
+ If you want to compile it as a module, say M here and read
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
-config IP_NF_MATCH_RECENT
- tristate "recent match support"
- depends on IP_NF_IPTABLES
+config IP_NF_MATCH_AH
+ tristate '"ah" match support'
+ depends on NETFILTER_ADVANCED
help
- This match is used for creating one or many lists of recently
- used addresses and then matching against that/those list(s).
-
- Short options are available by using 'iptables -m recent -h'
- Official Website: <http://snowman.net/projects/ipt_recent/>
+ This match extension allows you to match a range of SPIs
+ inside AH header of IPSec packets.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_MATCH_ECN
- tristate "ECN match support"
- depends on IP_NF_IPTABLES
+ tristate '"ecn" match support'
+ depends on NETFILTER_ADVANCED
help
This option adds a `ECN' match, which allows you to match against
the IPv4 and TCP header ECN fields.
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_MATCH_DSCP
- tristate "DSCP match support"
- depends on IP_NF_IPTABLES
- help
- This option adds a `DSCP' match, which allows you to match against
- the IPv4 header DSCP field (DSCP codepoint).
-
- The DSCP codepoint can have any value between 0x0 and 0x4f.
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_MATCH_AH_ESP
- tristate "AH/ESP match support"
- depends on IP_NF_IPTABLES
- help
- These two match extensions (`ah' and `esp') allow you to match a
- range of SPIs inside AH or ESP headers of IPSec packets.
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_MATCH_LENGTH
- tristate "LENGTH match support"
- depends on IP_NF_IPTABLES
- help
- This option allows you to match the length of a packet against a
- specific value or range of values.
-
- To compile it as a module, choose M here. If unsure, say N.
-
config IP_NF_MATCH_TTL
- tristate "TTL match support"
- depends on IP_NF_IPTABLES
- help
- This adds CONFIG_IP_NF_MATCH_TTL option, which enabled the user
- to match packets by their TTL value.
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_MATCH_TCPMSS
- tristate "tcpmss match support"
- depends on IP_NF_IPTABLES
- help
- This option adds a `tcpmss' match, which allows you to examine the
- MSS value of TCP SYN packets, which control the maximum packet size
- for that connection.
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_MATCH_HELPER
- tristate "Helper match support"
- depends on IP_NF_CONNTRACK && IP_NF_IPTABLES
- help
- Helper matching allows you to match packets in dynamic connections
- tracked by a conntrack-helper, ie. ip_conntrack_ftp
-
- To compile it as a module, choose M here. If unsure, say Y.
-
-config IP_NF_MATCH_STATE
- tristate "Connection state match support"
- depends on IP_NF_CONNTRACK && IP_NF_IPTABLES
- help
- Connection state matching allows you to match packets based on their
- relationship to a tracked connection (ie. previous packets). This
- is a powerful tool for packet classification.
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_MATCH_CONNTRACK
- tristate "Connection tracking match support"
- depends on IP_NF_CONNTRACK && IP_NF_IPTABLES
- help
- This is a general conntrack match module, a superset of the state match.
-
- It allows matching on additional conntrack information, which is
- useful in complex configurations, such as NAT gateways with multiple
- internet links or tunnels.
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_MATCH_OWNER
- tristate "Owner match support"
- depends on IP_NF_IPTABLES
- help
- Packet owner matching allows you to match locally-generated packets
- based on who created them: the user, group, process or session.
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_MATCH_PHYSDEV
- tristate "Physdev match support"
- depends on IP_NF_IPTABLES && BRIDGE_NETFILTER
- help
- Physdev packet matching matches against the physical bridge ports
- the IP packet arrived on or will leave by.
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_MATCH_ADDRTYPE
- tristate 'address type match support'
- depends on IP_NF_IPTABLES
- help
- This option allows you to match what routing thinks of an address,
- eg. UNICAST, LOCAL, BROADCAST, ...
-
- If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
-
-config IP_NF_MATCH_REALM
- tristate 'realm match support'
- depends on IP_NF_IPTABLES
- select NET_CLS_ROUTE
- help
- This option adds a `realm' match, which allows you to use the realm
- key from the routing subsystem inside iptables.
-
- This match pretty much resembles the CONFIG_NET_CLS_ROUTE4 option
- in tc world.
-
- If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
-
-config IP_NF_MATCH_SCTP
- tristate 'SCTP protocol match support'
- depends on IP_NF_IPTABLES
- help
- With this option enabled, you will be able to use the iptables
- `sctp' match in order to match on SCTP source/destination ports
- and SCTP chunk types.
-
- If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
-
-config IP_NF_MATCH_DCCP
- tristate 'DCCP protocol match support'
- depends on IP_NF_IPTABLES
- help
- With this option enabled, you will be able to use the iptables
- `dccp' match in order to match on DCCP source/destination ports
- and DCCP flags.
-
- If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
-
-config IP_NF_MATCH_COMMENT
- tristate 'comment match support'
- depends on IP_NF_IPTABLES
- help
- This option adds a `comment' dummy-match, which allows you to put
- comments in your iptables ruleset.
-
- If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
-
-config IP_NF_MATCH_CONNMARK
- tristate 'Connection mark match support'
- depends on IP_NF_CONNTRACK_MARK && IP_NF_IPTABLES
- help
- This option adds a `connmark' match, which allows you to match the
- connection mark value previously set for the session by `CONNMARK'.
-
- If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. The module will be called
- ipt_connmark.o. If unsure, say `N'.
-
-config IP_NF_MATCH_CONNBYTES
- tristate 'Connection byte/packet counter match support'
- depends on IP_NF_CT_ACCT && IP_NF_IPTABLES
- help
- This option adds a `connbytes' match, which allows you to match the
- number of bytes and/or packets for each direction within a connection.
-
- If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
-
-config IP_NF_MATCH_HASHLIMIT
- tristate 'hashlimit match support'
- depends on IP_NF_IPTABLES
- help
- This option adds a new iptables `hashlimit' match.
-
- As opposed to `limit', this match dynamically crates a hash table
- of limit buckets, based on your selection of source/destination
- ip addresses and/or ports.
-
- It enables you to express policies like `10kpps for any given
- destination IP' or `500pps from any given source IP' with a single
- IPtables rule.
-
-config IP_NF_MATCH_STRING
- tristate 'string match support'
- depends on IP_NF_IPTABLES
- select TEXTSEARCH
- select TEXTSEARCH_KMP
- select TEXTSEARCH_FSM
- help
- This option adds a `string' match, which allows you to look for
- pattern matchings in packets.
-
- To compile it as a module, choose M here. If unsure, say N.
+ tristate '"ttl" match support'
+ depends on NETFILTER_ADVANCED
+ select NETFILTER_XT_MATCH_HL
+ ---help---
+ This is a backwards-compat option for the user's convenience
+ (e.g. when running oldconfig). It selects
+ CONFIG_NETFILTER_XT_MATCH_HL.
# `filter', generic and specific targets
config IP_NF_FILTER
tristate "Packet filtering"
- depends on IP_NF_IPTABLES
+ default m if NETFILTER_ADVANCED=n
help
Packet filtering defines a table `filter', which has a series of
rules for simple packet filtering at local input, forwarding and
config IP_NF_TARGET_REJECT
tristate "REJECT target support"
depends on IP_NF_FILTER
+ default m if NETFILTER_ADVANCED=n
help
The REJECT target allows a filtering rule to specify that an ICMP
error should be issued in response to an incoming packet, rather
config IP_NF_TARGET_LOG
tristate "LOG target support"
- depends on IP_NF_IPTABLES
+ default m if NETFILTER_ADVANCED=n
help
This option adds a `LOG' target, which allows you to create rules in
any iptables table which records the packet header to the syslog.
config IP_NF_TARGET_ULOG
tristate "ULOG target support"
- depends on IP_NF_IPTABLES
+ default m if NETFILTER_ADVANCED=n
---help---
+
+ This option enables the old IPv4-only "ipt_ULOG" implementation
+ which has been obsoleted by the new "nfnetlink_log" code (see
+ CONFIG_NETFILTER_NETLINK_LOG).
+
This option adds a `ULOG' target, which allows you to create rules in
any iptables table. The packet is passed to a userspace logging
daemon using netlink multicast sockets; unlike the LOG target
which can only be viewed through syslog.
- The apropriate userspace logging daemon (ulogd) may be obtained from
+ The appropriate userspace logging daemon (ulogd) may be obtained from
<http://www.gnumonks.org/projects/ulogd/>
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_TARGET_TCPMSS
- tristate "TCPMSS target support"
- depends on IP_NF_IPTABLES
- ---help---
- This option adds a `TCPMSS' target, which allows you to alter the
- MSS value of TCP SYN packets, to control the maximum size for that
- connection (usually limiting it to your outgoing interface's MTU
- minus 40).
-
- This is used to overcome criminally braindead ISPs or servers which
- block ICMP Fragmentation Needed packets. The symptoms of this
- problem are that everything works fine from your Linux
- firewall/router, but machines behind it can never exchange large
- packets:
- 1) Web browsers connect, then hang with no data received.
- 2) Small mail works fine, but large emails hang.
- 3) ssh works fine, but scp hangs after initial handshaking.
-
- Workaround: activate this option and add a rule to your firewall
- configuration like:
-
- iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN \
- -j TCPMSS --clamp-mss-to-pmtu
-
- To compile it as a module, choose M here. If unsure, say N.
-
-# NAT + specific targets
-config IP_NF_NAT
+# NAT + specific targets: nf_conntrack
+config NF_NAT
tristate "Full NAT"
- depends on IP_NF_IPTABLES && IP_NF_CONNTRACK
+ depends on NF_CONNTRACK_IPV4
+ default m if NETFILTER_ADVANCED=n
help
The Full NAT option allows masquerading, port forwarding and other
forms of full Network Address Port Translation. It is controlled by
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_NAT_NEEDED
+config NF_NAT_NEEDED
bool
- depends on IP_NF_NAT != n
+ depends on NF_NAT
default y
config IP_NF_TARGET_MASQUERADE
tristate "MASQUERADE target support"
- depends on IP_NF_NAT
+ depends on NF_NAT
+ default m if NETFILTER_ADVANCED=n
help
Masquerading is a special case of NAT: all outgoing connections are
changed to seem to come from a particular interface's address, and
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_TARGET_REDIRECT
- tristate "REDIRECT target support"
- depends on IP_NF_NAT
- help
- REDIRECT is a special case of NAT: all incoming connections are
- mapped onto the incoming interface's address, causing the packets to
- come to the local machine instead of passing through. This is
- useful for transparent proxies.
-
- To compile it as a module, choose M here. If unsure, say N.
-
config IP_NF_TARGET_NETMAP
tristate "NETMAP target support"
- depends on IP_NF_NAT
+ depends on NF_NAT
+ depends on NETFILTER_ADVANCED
help
NETMAP is an implementation of static 1:1 NAT mapping of network
addresses. It maps the network address part, while keeping the host
- address part intact. It is similar to Fast NAT, except that
- Netfilter's connection tracking doesn't work well with Fast NAT.
+ address part intact.
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_TARGET_SAME
- tristate "SAME target support"
- depends on IP_NF_NAT
+config IP_NF_TARGET_REDIRECT
+ tristate "REDIRECT target support"
+ depends on NF_NAT
+ depends on NETFILTER_ADVANCED
help
- This option adds a `SAME' target, which works like the standard SNAT
- target, but attempts to give clients the same IP for all connections.
+ REDIRECT is a special case of NAT: all incoming connections are
+ mapped onto the incoming interface's address, causing the packets to
+ come to the local machine instead of passing through. This is
+ useful for transparent proxies.
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_NAT_SNMP_BASIC
- tristate "Basic SNMP-ALG support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && IP_NF_NAT
+config NF_NAT_SNMP_BASIC
+ tristate "Basic SNMP-ALG support"
+ depends on NF_NAT
+ depends on NETFILTER_ADVANCED
---help---
This module implements an Application Layer Gateway (ALG) for
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_NAT_IRC
+# If they want FTP, set to $CONFIG_IP_NF_NAT (m or y),
+# or $CONFIG_IP_NF_FTP (m or y), whichever is weaker.
+# From kconfig-language.txt:
+#
+# <expr> '&&' <expr> (6)
+#
+# (6) Returns the result of min(/expr/, /expr/).
+config NF_NAT_PROTO_DCCP
+ tristate
+ depends on NF_NAT && NF_CT_PROTO_DCCP
+ default NF_NAT && NF_CT_PROTO_DCCP
+
+config NF_NAT_PROTO_GRE
tristate
- depends on IP_NF_IPTABLES!=n && IP_NF_CONNTRACK!=n && IP_NF_NAT!=n
- default IP_NF_NAT if IP_NF_IRC=y
- default m if IP_NF_IRC=m
+ depends on NF_NAT && NF_CT_PROTO_GRE
-# If they want FTP, set to $CONFIG_IP_NF_NAT (m or y),
-# or $CONFIG_IP_NF_FTP (m or y), whichever is weaker. Argh.
-config IP_NF_NAT_FTP
+config NF_NAT_PROTO_UDPLITE
tristate
- depends on IP_NF_IPTABLES!=n && IP_NF_CONNTRACK!=n && IP_NF_NAT!=n
- default IP_NF_NAT if IP_NF_FTP=y
- default m if IP_NF_FTP=m
+ depends on NF_NAT && NF_CT_PROTO_UDPLITE
+ default NF_NAT && NF_CT_PROTO_UDPLITE
-config IP_NF_NAT_TFTP
+config NF_NAT_PROTO_SCTP
tristate
- depends on IP_NF_IPTABLES!=n && IP_NF_CONNTRACK!=n && IP_NF_NAT!=n
- default IP_NF_NAT if IP_NF_TFTP=y
- default m if IP_NF_TFTP=m
+ default NF_NAT && NF_CT_PROTO_SCTP
+ depends on NF_NAT && NF_CT_PROTO_SCTP
+ select LIBCRC32C
-config IP_NF_NAT_AMANDA
+config NF_NAT_FTP
tristate
- depends on IP_NF_IPTABLES!=n && IP_NF_CONNTRACK!=n && IP_NF_NAT!=n
- default IP_NF_NAT if IP_NF_AMANDA=y
- default m if IP_NF_AMANDA=m
+ depends on NF_CONNTRACK && NF_NAT
+ default NF_NAT && NF_CONNTRACK_FTP
+
+config NF_NAT_IRC
+ tristate
+ depends on NF_CONNTRACK && NF_NAT
+ default NF_NAT && NF_CONNTRACK_IRC
+
+config NF_NAT_TFTP
+ tristate
+ depends on NF_CONNTRACK && NF_NAT
+ default NF_NAT && NF_CONNTRACK_TFTP
+
+config NF_NAT_AMANDA
+ tristate
+ depends on NF_CONNTRACK && NF_NAT
+ default NF_NAT && NF_CONNTRACK_AMANDA
+
+config NF_NAT_PPTP
+ tristate
+ depends on NF_CONNTRACK && NF_NAT
+ default NF_NAT && NF_CONNTRACK_PPTP
+ select NF_NAT_PROTO_GRE
+
+config NF_NAT_H323
+ tristate
+ depends on NF_CONNTRACK && NF_NAT
+ default NF_NAT && NF_CONNTRACK_H323
+
+config NF_NAT_SIP
+ tristate
+ depends on NF_CONNTRACK && NF_NAT
+ default NF_NAT && NF_CONNTRACK_SIP
# mangle + specific targets
config IP_NF_MANGLE
tristate "Packet mangling"
- depends on IP_NF_IPTABLES
+ default m if NETFILTER_ADVANCED=n
help
This option adds a `mangle' table to iptables: see the man page for
iptables(8). This table is used for various packet alterations
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_TARGET_TOS
- tristate "TOS target support"
- depends on IP_NF_MANGLE
+config IP_NF_TARGET_CLUSTERIP
+ tristate "CLUSTERIP target support (EXPERIMENTAL)"
+ depends on IP_NF_MANGLE && EXPERIMENTAL
+ depends on NF_CONNTRACK_IPV4
+ depends on NETFILTER_ADVANCED
+ select NF_CONNTRACK_MARK
help
- This option adds a `TOS' target, which allows you to create rules in
- the `mangle' table which alter the Type Of Service field of an IP
- packet prior to routing.
-
+ The CLUSTERIP target allows you to build load-balancing clusters of
+ network servers without having a dedicated load-balancing
+ router/server/switch.
+
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_TARGET_ECN
tristate "ECN target support"
depends on IP_NF_MANGLE
+ depends on NETFILTER_ADVANCED
---help---
This option adds a `ECN' target, which can be used in the iptables mangle
table.
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_TARGET_DSCP
- tristate "DSCP target support"
- depends on IP_NF_MANGLE
- help
- This option adds a `DSCP' match, which allows you to match against
- the IPv4 header DSCP field (DSCP codepoint).
-
- The DSCP codepoint can have any value between 0x0 and 0x4f.
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_TARGET_MARK
- tristate "MARK target support"
- depends on IP_NF_MANGLE
- help
- This option adds a `MARK' target, which allows you to create rules
- in the `mangle' table which alter the netfilter mark (nfmark) field
- associated with the packet prior to routing. This can change
- the routing method (see `Use netfilter MARK value as routing
- key') and can also be used by other subsystems to change their
- behavior.
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_TARGET_CLASSIFY
- tristate "CLASSIFY target support"
- depends on IP_NF_MANGLE
- help
- This option adds a `CLASSIFY' target, which enables the user to set
- the priority of a packet. Some qdiscs can use this value for
- classification, among these are:
-
- atm, cbq, dsmark, pfifo_fast, htb, prio
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_TARGET_CONNMARK
- tristate 'CONNMARK target support'
- depends on IP_NF_CONNTRACK_MARK && IP_NF_MANGLE
- help
- This option adds a `CONNMARK' target, which allows one to manipulate
- the connection mark value. Similar to the MARK target, but
- affects the connection mark value rather than the packet mark value.
-
- If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. The module will be called
- ipt_CONNMARK.o. If unsure, say `N'.
-
-config IP_NF_TARGET_CLUSTERIP
- tristate "CLUSTERIP target support (EXPERIMENTAL)"
- depends on IP_NF_CONNTRACK_MARK && IP_NF_IPTABLES && EXPERIMENTAL
- help
- The CLUSTERIP target allows you to build load-balancing clusters of
- network servers without having a dedicated load-balancing
- router/server/switch.
-
- To compile it as a module, choose M here. If unsure, say N.
+config IP_NF_TARGET_TTL
+ tristate '"TTL" target support'
+ depends on NETFILTER_ADVANCED
+ select NETFILTER_XT_TARGET_HL
+ ---help---
+ This is a backwards-compat option for the user's convenience
+ (e.g. when running oldconfig). It selects
+ CONFIG_NETFILTER_XT_TARGET_HL.
# raw + specific targets
config IP_NF_RAW
tristate 'raw table support (required for NOTRACK/TRACE)'
- depends on IP_NF_IPTABLES
+ depends on NETFILTER_ADVANCED
help
This option adds a `raw' table to iptables. This table is the very
first in the netfilter framework and hooks in at the PREROUTING
and OUTPUT chains.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
-config IP_NF_TARGET_NOTRACK
- tristate 'NOTRACK target support'
- depends on IP_NF_RAW
- depends on IP_NF_CONNTRACK
+# security table for MAC policy
+config IP_NF_SECURITY
+ tristate "Security table"
+ depends on SECURITY
+ depends on NETFILTER_ADVANCED
help
- The NOTRACK target allows a select rule to specify
- which packets *not* to enter the conntrack/NAT
- subsystem with all the consequences (no ICMP error tracking,
- no protocol helpers for the selected packets).
-
- If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ This option adds a `security' table to iptables, for use
+ with Mandatory Access Control (MAC) policy.
+
+ If unsure, say N.
+endif # IP_NF_IPTABLES
# ARP tables
config IP_NF_ARPTABLES
tristate "ARP tables support"
+ select NETFILTER_XTABLES
+ depends on NETFILTER_ADVANCED
help
arptables is a general, extensible packet identification framework.
The ARP packet filtering and mangling (manipulation)subsystems
To compile it as a module, choose M here. If unsure, say N.
+if IP_NF_ARPTABLES
+
config IP_NF_ARPFILTER
tristate "ARP packet filtering"
- depends on IP_NF_ARPTABLES
help
ARP packet filtering defines a table `filter', which has a series of
rules for simple ARP packet filtering at local input and
config IP_NF_ARP_MANGLE
tristate "ARP payload mangling"
- depends on IP_NF_ARPTABLES
help
Allows altering the ARP packet payload: source and destination
hardware and network addresses.
-config IP_NF_CONNTRACK_NETLINK
- tristate 'Connection tracking netlink interface'
- depends on IP_NF_CONNTRACK && NETFILTER_NETLINK
- help
- This option enables support for a netlink-based userspace interface
+endif # IP_NF_ARPTABLES
endmenu