/*
* FIXME: remove all knowledge of the buffer layer from the core VM
*/
-#include <linux/buffer_head.h> /* for generic_osync_inode */
+#include <linux/buffer_head.h> /* for try_to_free_buffers */
#include <asm/mman.h>
-
/*
* Shared mappings implemented 30.11.1994. It's not fully working yet,
* though.
/*
* Lock ordering:
*
- * ->i_mmap_lock (vmtruncate)
+ * ->i_mmap_lock (truncate_pagecache)
* ->private_lock (__free_pte->__set_page_dirty_buffers)
* ->swap_lock (exclusive_swap_page, others)
* ->mapping->tree_lock
*
* ->task->proc_lock
* ->dcache_lock (proc_pid_lookup)
+ *
+ * (code doesn't rely on that order, so you could switch it around)
+ * ->tasklist_lock (memory_failure, collect_procs_ao)
+ * ->i_mmap_lock
*/
/*
page->mapping = NULL;
mapping->nrpages--;
__dec_zone_page_state(page, NR_FILE_PAGES);
+ if (PageSwapBacked(page))
+ __dec_zone_page_state(page, NR_SHMEM);
BUG_ON(page_mapped(page));
/*
}
/**
- * sync_page_range - write and wait on all pages in the passed range
- * @inode: target inode
- * @mapping: target address_space
- * @pos: beginning offset in pages to write
- * @count: number of bytes to write
- *
- * Write and wait upon all the pages in the passed range. This is a "data
- * integrity" operation. It waits upon in-flight writeout before starting and
- * waiting upon new writeout. If there was an IO error, return it.
+ * filemap_fdatawait_range - wait for all under-writeback pages to complete in a given range
+ * @mapping: address space structure to wait for
+ * @start: offset in bytes where the range starts
+ * @end: offset in bytes where the range ends (inclusive)
*
- * We need to re-take i_mutex during the generic_osync_inode list walk because
- * it is otherwise livelockable.
- */
-int sync_page_range(struct inode *inode, struct address_space *mapping,
- loff_t pos, loff_t count)
-{
- pgoff_t start = pos >> PAGE_CACHE_SHIFT;
- pgoff_t end = (pos + count - 1) >> PAGE_CACHE_SHIFT;
- int ret;
-
- if (!mapping_cap_writeback_dirty(mapping) || !count)
- return 0;
- ret = filemap_fdatawrite_range(mapping, pos, pos + count - 1);
- if (ret == 0) {
- mutex_lock(&inode->i_mutex);
- ret = generic_osync_inode(inode, mapping, OSYNC_METADATA);
- mutex_unlock(&inode->i_mutex);
- }
- if (ret == 0)
- ret = wait_on_page_writeback_range(mapping, start, end);
- return ret;
-}
-EXPORT_SYMBOL(sync_page_range);
-
-/**
- * sync_page_range_nolock - write & wait on all pages in the passed range without locking
- * @inode: target inode
- * @mapping: target address_space
- * @pos: beginning offset in pages to write
- * @count: number of bytes to write
+ * Walk the list of under-writeback pages of the given address space
+ * in the given range and wait for all of them.
*
- * Note: Holding i_mutex across sync_page_range_nolock() is not a good idea
- * as it forces O_SYNC writers to different parts of the same file
- * to be serialised right until io completion.
+ * This is just a simple wrapper so that callers don't have to convert offsets
+ * to page indexes themselves
*/
-int sync_page_range_nolock(struct inode *inode, struct address_space *mapping,
- loff_t pos, loff_t count)
+int filemap_fdatawait_range(struct address_space *mapping, loff_t start,
+ loff_t end)
{
- pgoff_t start = pos >> PAGE_CACHE_SHIFT;
- pgoff_t end = (pos + count - 1) >> PAGE_CACHE_SHIFT;
- int ret;
-
- if (!mapping_cap_writeback_dirty(mapping) || !count)
- return 0;
- ret = filemap_fdatawrite_range(mapping, pos, pos + count - 1);
- if (ret == 0)
- ret = generic_osync_inode(inode, mapping, OSYNC_METADATA);
- if (ret == 0)
- ret = wait_on_page_writeback_range(mapping, start, end);
- return ret;
+ return wait_on_page_writeback_range(mapping, start >> PAGE_CACHE_SHIFT,
+ end >> PAGE_CACHE_SHIFT);
}
-EXPORT_SYMBOL(sync_page_range_nolock);
+EXPORT_SYMBOL(filemap_fdatawait_range);
/**
* filemap_fdatawait - wait for all under-writeback pages to complete
if (likely(!error)) {
mapping->nrpages++;
__inc_zone_page_state(page, NR_FILE_PAGES);
+ if (PageSwapBacked(page))
+ __inc_zone_page_state(page, NR_SHMEM);
spin_unlock_irq(&mapping->tree_lock);
} else {
page->mapping = NULL;
}
EXPORT_SYMBOL(filemap_fault);
-struct vm_operations_struct generic_file_vm_ops = {
+const struct vm_operations_struct generic_file_vm_ops = {
.fault = filemap_fault,
};
}
*ppos = end;
}
-
- /*
- * Sync the fs metadata but not the minor inode changes and
- * of course not the data as we did direct DMA for the IO.
- * i_mutex is held, which protects generic_osync_inode() from
- * livelocking. AIO O_DIRECT ops attempt to sync metadata here.
- */
out:
- if ((written >= 0 || written == -EIOCBQUEUED) &&
- ((file->f_flags & O_SYNC) || IS_SYNC(inode))) {
- int err = generic_osync_inode(inode, mapping, OSYNC_METADATA);
- if (err < 0)
- written = err;
- }
return written;
}
EXPORT_SYMBOL(generic_file_direct_write);
pagefault_enable();
flush_dcache_page(page);
+ mark_page_accessed(page);
status = a_ops->write_end(file, mapping, pos, bytes, copied,
page, fsdata);
if (unlikely(status < 0))
{
struct file *file = iocb->ki_filp;
struct address_space *mapping = file->f_mapping;
- const struct address_space_operations *a_ops = mapping->a_ops;
- struct inode *inode = mapping->host;
ssize_t status;
struct iov_iter i;
if (likely(status >= 0)) {
written += status;
*ppos = pos + status;
-
- /*
- * For now, when the user asks for O_SYNC, we'll actually give
- * O_DSYNC
- */
- if (unlikely((file->f_flags & O_SYNC) || IS_SYNC(inode))) {
- if (!a_ops->writepage || !is_sync_kiocb(iocb))
- status = generic_osync_inode(inode, mapping,
- OSYNC_METADATA|OSYNC_DATA);
- }
}
/*
}
EXPORT_SYMBOL(generic_file_buffered_write);
-static ssize_t
-__generic_file_aio_write_nolock(struct kiocb *iocb, const struct iovec *iov,
- unsigned long nr_segs, loff_t *ppos)
+/**
+ * __generic_file_aio_write - write data to a file
+ * @iocb: IO state structure (file, offset, etc.)
+ * @iov: vector with data to write
+ * @nr_segs: number of segments in the vector
+ * @ppos: position where to write
+ *
+ * This function does all the work needed for actually writing data to a
+ * file. It does all basic checks, removes SUID from the file, updates
+ * modification times and calls proper subroutines depending on whether we
+ * do direct IO or a standard buffered write.
+ *
+ * It expects i_mutex to be grabbed unless we work on a block device or similar
+ * object which does not need locking at all.
+ *
+ * This function does *not* take care of syncing data in case of O_SYNC write.
+ * A caller has to handle it. This is mainly due to the fact that we want to
+ * avoid syncing under i_mutex.
+ */
+ssize_t __generic_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
+ unsigned long nr_segs, loff_t *ppos)
{
struct file *file = iocb->ki_filp;
struct address_space * mapping = file->f_mapping;
current->backing_dev_info = NULL;
return written ? written : err;
}
+EXPORT_SYMBOL(__generic_file_aio_write);
-ssize_t generic_file_aio_write_nolock(struct kiocb *iocb,
- const struct iovec *iov, unsigned long nr_segs, loff_t pos)
-{
- struct file *file = iocb->ki_filp;
- struct address_space *mapping = file->f_mapping;
- struct inode *inode = mapping->host;
- ssize_t ret;
-
- BUG_ON(iocb->ki_pos != pos);
-
- ret = __generic_file_aio_write_nolock(iocb, iov, nr_segs,
- &iocb->ki_pos);
-
- if (ret > 0 && ((file->f_flags & O_SYNC) || IS_SYNC(inode))) {
- ssize_t err;
-
- err = sync_page_range_nolock(inode, mapping, pos, ret);
- if (err < 0)
- ret = err;
- }
- return ret;
-}
-EXPORT_SYMBOL(generic_file_aio_write_nolock);
-
+/**
+ * generic_file_aio_write - write data to a file
+ * @iocb: IO state structure
+ * @iov: vector with data to write
+ * @nr_segs: number of segments in the vector
+ * @pos: position in file where to write
+ *
+ * This is a wrapper around __generic_file_aio_write() to be used by most
+ * filesystems. It takes care of syncing the file in case of O_SYNC file
+ * and acquires i_mutex as needed.
+ */
ssize_t generic_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
unsigned long nr_segs, loff_t pos)
{
struct file *file = iocb->ki_filp;
- struct address_space *mapping = file->f_mapping;
- struct inode *inode = mapping->host;
+ struct inode *inode = file->f_mapping->host;
ssize_t ret;
BUG_ON(iocb->ki_pos != pos);
mutex_lock(&inode->i_mutex);
- ret = __generic_file_aio_write_nolock(iocb, iov, nr_segs,
- &iocb->ki_pos);
+ ret = __generic_file_aio_write(iocb, iov, nr_segs, &iocb->ki_pos);
mutex_unlock(&inode->i_mutex);
- if (ret > 0 && ((file->f_flags & O_SYNC) || IS_SYNC(inode))) {
+ if (ret > 0 || ret == -EIOCBQUEUED) {
ssize_t err;
- err = sync_page_range(inode, mapping, pos, ret);
- if (err < 0)
+ err = generic_write_sync(file, pos, ret);
+ if (err < 0 && ret > 0)
ret = err;
}
return ret;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff