/*
* linux/kernel/timer.c
*
- * Kernel internal timers, kernel timekeeping, basic process system calls
+ * Kernel internal timers, basic process system calls
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/swap.h>
+#include <linux/pid_namespace.h>
#include <linux/notifier.h>
#include <linux/thread_info.h>
#include <linux/time.h>
#define TVN_MASK (TVN_SIZE - 1)
#define TVR_MASK (TVR_SIZE - 1)
-typedef struct tvec_s {
+struct tvec {
struct list_head vec[TVN_SIZE];
-} tvec_t;
+};
-typedef struct tvec_root_s {
+struct tvec_root {
struct list_head vec[TVR_SIZE];
-} tvec_root_t;
+};
-struct tvec_t_base_s {
+struct tvec_base {
spinlock_t lock;
struct timer_list *running_timer;
unsigned long timer_jiffies;
- tvec_root_t tv1;
- tvec_t tv2;
- tvec_t tv3;
- tvec_t tv4;
- tvec_t tv5;
-} ____cacheline_aligned_in_smp;
-
-typedef struct tvec_t_base_s tvec_base_t;
-
-tvec_base_t boot_tvec_bases;
+ struct tvec_root tv1;
+ struct tvec tv2;
+ struct tvec tv3;
+ struct tvec tv4;
+ struct tvec tv5;
+} ____cacheline_aligned;
+
+struct tvec_base boot_tvec_bases;
EXPORT_SYMBOL(boot_tvec_bases);
-static DEFINE_PER_CPU(tvec_base_t *, tvec_bases) = &boot_tvec_bases;
+static DEFINE_PER_CPU(struct tvec_base *, tvec_bases) = &boot_tvec_bases;
-/**
- * __round_jiffies - function to round jiffies to a full second
- * @j: the time in (absolute) jiffies that should be rounded
- * @cpu: the processor number on which the timeout will happen
- *
- * __round_jiffies() rounds an absolute time in the future (in jiffies)
- * up or down to (approximately) full seconds. This is useful for timers
- * for which the exact time they fire does not matter too much, as long as
- * they fire approximately every X seconds.
- *
- * By rounding these timers to whole seconds, all such timers will fire
- * at the same time, rather than at various times spread out. The goal
- * of this is to have the CPU wake up less, which saves power.
- *
- * The exact rounding is skewed for each processor to avoid all
- * processors firing at the exact same time, which could lead
- * to lock contention or spurious cache line bouncing.
- *
- * The return value is the rounded version of the @j parameter.
+/*
+ * Note that all tvec_bases are 2 byte aligned and lower bit of
+ * base in timer_list is guaranteed to be zero. Use the LSB for
+ * the new flag to indicate whether the timer is deferrable
*/
-unsigned long __round_jiffies(unsigned long j, int cpu)
+#define TBASE_DEFERRABLE_FLAG (0x1)
+
+/* Functions below help us manage 'deferrable' flag */
+static inline unsigned int tbase_get_deferrable(struct tvec_base *base)
+{
+ return ((unsigned int)(unsigned long)base & TBASE_DEFERRABLE_FLAG);
+}
+
+static inline struct tvec_base *tbase_get_base(struct tvec_base *base)
+{
+ return ((struct tvec_base *)((unsigned long)base & ~TBASE_DEFERRABLE_FLAG));
+}
+
+static inline void timer_set_deferrable(struct timer_list *timer)
+{
+ timer->base = ((struct tvec_base *)((unsigned long)(timer->base) |
+ TBASE_DEFERRABLE_FLAG));
+}
+
+static inline void
+timer_set_base(struct timer_list *timer, struct tvec_base *new_base)
+{
+ timer->base = (struct tvec_base *)((unsigned long)(new_base) |
+ tbase_get_deferrable(timer->base));
+}
+
+static unsigned long round_jiffies_common(unsigned long j, int cpu,
+ bool force_up)
{
int rem;
unsigned long original = j;
* due to delays of the timer irq, long irq off times etc etc) then
* we should round down to the whole second, not up. Use 1/4th second
* as cutoff for this rounding as an extreme upper bound for this.
+ * But never round down if @force_up is set.
*/
- if (rem < HZ/4) /* round down */
+ if (rem < HZ/4 && !force_up) /* round down */
j = j - rem;
else /* round up */
j = j - rem + HZ;
return original;
return j;
}
+
+/**
+ * __round_jiffies - function to round jiffies to a full second
+ * @j: the time in (absolute) jiffies that should be rounded
+ * @cpu: the processor number on which the timeout will happen
+ *
+ * __round_jiffies() rounds an absolute time in the future (in jiffies)
+ * up or down to (approximately) full seconds. This is useful for timers
+ * for which the exact time they fire does not matter too much, as long as
+ * they fire approximately every X seconds.
+ *
+ * By rounding these timers to whole seconds, all such timers will fire
+ * at the same time, rather than at various times spread out. The goal
+ * of this is to have the CPU wake up less, which saves power.
+ *
+ * The exact rounding is skewed for each processor to avoid all
+ * processors firing at the exact same time, which could lead
+ * to lock contention or spurious cache line bouncing.
+ *
+ * The return value is the rounded version of the @j parameter.
+ */
+unsigned long __round_jiffies(unsigned long j, int cpu)
+{
+ return round_jiffies_common(j, cpu, false);
+}
EXPORT_SYMBOL_GPL(__round_jiffies);
/**
*/
unsigned long __round_jiffies_relative(unsigned long j, int cpu)
{
- /*
- * In theory the following code can skip a jiffy in case jiffies
- * increments right between the addition and the later subtraction.
- * However since the entire point of this function is to use approximate
- * timeouts, it's entirely ok to not handle that.
- */
- return __round_jiffies(j + jiffies, cpu) - jiffies;
+ unsigned long j0 = jiffies;
+
+ /* Use j0 because jiffies might change while we run */
+ return round_jiffies_common(j + j0, cpu, false) - j0;
}
EXPORT_SYMBOL_GPL(__round_jiffies_relative);
*/
unsigned long round_jiffies(unsigned long j)
{
- return __round_jiffies(j, raw_smp_processor_id());
+ return round_jiffies_common(j, raw_smp_processor_id(), false);
}
EXPORT_SYMBOL_GPL(round_jiffies);
}
EXPORT_SYMBOL_GPL(round_jiffies_relative);
+/**
+ * __round_jiffies_up - function to round jiffies up to a full second
+ * @j: the time in (absolute) jiffies that should be rounded
+ * @cpu: the processor number on which the timeout will happen
+ *
+ * This is the same as __round_jiffies() except that it will never
+ * round down. This is useful for timeouts for which the exact time
+ * of firing does not matter too much, as long as they don't fire too
+ * early.
+ */
+unsigned long __round_jiffies_up(unsigned long j, int cpu)
+{
+ return round_jiffies_common(j, cpu, true);
+}
+EXPORT_SYMBOL_GPL(__round_jiffies_up);
+
+/**
+ * __round_jiffies_up_relative - function to round jiffies up to a full second
+ * @j: the time in (relative) jiffies that should be rounded
+ * @cpu: the processor number on which the timeout will happen
+ *
+ * This is the same as __round_jiffies_relative() except that it will never
+ * round down. This is useful for timeouts for which the exact time
+ * of firing does not matter too much, as long as they don't fire too
+ * early.
+ */
+unsigned long __round_jiffies_up_relative(unsigned long j, int cpu)
+{
+ unsigned long j0 = jiffies;
+
+ /* Use j0 because jiffies might change while we run */
+ return round_jiffies_common(j + j0, cpu, true) - j0;
+}
+EXPORT_SYMBOL_GPL(__round_jiffies_up_relative);
+
+/**
+ * round_jiffies_up - function to round jiffies up to a full second
+ * @j: the time in (absolute) jiffies that should be rounded
+ *
+ * This is the same as round_jiffies() except that it will never
+ * round down. This is useful for timeouts for which the exact time
+ * of firing does not matter too much, as long as they don't fire too
+ * early.
+ */
+unsigned long round_jiffies_up(unsigned long j)
+{
+ return round_jiffies_common(j, raw_smp_processor_id(), true);
+}
+EXPORT_SYMBOL_GPL(round_jiffies_up);
+
+/**
+ * round_jiffies_up_relative - function to round jiffies up to a full second
+ * @j: the time in (relative) jiffies that should be rounded
+ *
+ * This is the same as round_jiffies_relative() except that it will never
+ * round down. This is useful for timeouts for which the exact time
+ * of firing does not matter too much, as long as they don't fire too
+ * early.
+ */
+unsigned long round_jiffies_up_relative(unsigned long j)
+{
+ return __round_jiffies_up_relative(j, raw_smp_processor_id());
+}
+EXPORT_SYMBOL_GPL(round_jiffies_up_relative);
+
-static inline void set_running_timer(tvec_base_t *base,
+static inline void set_running_timer(struct tvec_base *base,
struct timer_list *timer)
{
#ifdef CONFIG_SMP
#endif
}
-static void internal_add_timer(tvec_base_t *base, struct timer_list *timer)
+static void internal_add_timer(struct tvec_base *base, struct timer_list *timer)
{
unsigned long expires = timer->expires;
unsigned long idx = expires - base->timer_jiffies;
memcpy(timer->start_comm, current->comm, TASK_COMM_LEN);
timer->start_pid = current->pid;
}
+
+static void timer_stats_account_timer(struct timer_list *timer)
+{
+ unsigned int flag = 0;
+
+ if (unlikely(tbase_get_deferrable(timer->base)))
+ flag |= TIMER_STATS_FLAG_DEFERRABLE;
+
+ timer_stats_update_stats(timer, timer->start_pid, timer->start_site,
+ timer->function, timer->start_comm, flag);
+}
+
+#else
+static void timer_stats_account_timer(struct timer_list *timer) {}
#endif
-/**
- * init_timer - initialize a timer.
- * @timer: the timer to be initialized
- *
- * init_timer() must be done to a timer prior calling *any* of the
- * other timer functions.
+#ifdef CONFIG_DEBUG_OBJECTS_TIMERS
+
+static struct debug_obj_descr timer_debug_descr;
+
+/*
+ * fixup_init is called when:
+ * - an active object is initialized
+ */
+static int timer_fixup_init(void *addr, enum debug_obj_state state)
+{
+ struct timer_list *timer = addr;
+
+ switch (state) {
+ case ODEBUG_STATE_ACTIVE:
+ del_timer_sync(timer);
+ debug_object_init(timer, &timer_debug_descr);
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+/*
+ * fixup_activate is called when:
+ * - an active object is activated
+ * - an unknown object is activated (might be a statically initialized object)
+ */
+static int timer_fixup_activate(void *addr, enum debug_obj_state state)
+{
+ struct timer_list *timer = addr;
+
+ switch (state) {
+
+ case ODEBUG_STATE_NOTAVAILABLE:
+ /*
+ * This is not really a fixup. The timer was
+ * statically initialized. We just make sure that it
+ * is tracked in the object tracker.
+ */
+ if (timer->entry.next == NULL &&
+ timer->entry.prev == TIMER_ENTRY_STATIC) {
+ debug_object_init(timer, &timer_debug_descr);
+ debug_object_activate(timer, &timer_debug_descr);
+ return 0;
+ } else {
+ WARN_ON_ONCE(1);
+ }
+ return 0;
+
+ case ODEBUG_STATE_ACTIVE:
+ WARN_ON(1);
+
+ default:
+ return 0;
+ }
+}
+
+/*
+ * fixup_free is called when:
+ * - an active object is freed
*/
-void fastcall init_timer(struct timer_list *timer)
+static int timer_fixup_free(void *addr, enum debug_obj_state state)
+{
+ struct timer_list *timer = addr;
+
+ switch (state) {
+ case ODEBUG_STATE_ACTIVE:
+ del_timer_sync(timer);
+ debug_object_free(timer, &timer_debug_descr);
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static struct debug_obj_descr timer_debug_descr = {
+ .name = "timer_list",
+ .fixup_init = timer_fixup_init,
+ .fixup_activate = timer_fixup_activate,
+ .fixup_free = timer_fixup_free,
+};
+
+static inline void debug_timer_init(struct timer_list *timer)
+{
+ debug_object_init(timer, &timer_debug_descr);
+}
+
+static inline void debug_timer_activate(struct timer_list *timer)
+{
+ debug_object_activate(timer, &timer_debug_descr);
+}
+
+static inline void debug_timer_deactivate(struct timer_list *timer)
+{
+ debug_object_deactivate(timer, &timer_debug_descr);
+}
+
+static inline void debug_timer_free(struct timer_list *timer)
+{
+ debug_object_free(timer, &timer_debug_descr);
+}
+
+static void __init_timer(struct timer_list *timer,
+ const char *name,
+ struct lock_class_key *key);
+
+void init_timer_on_stack_key(struct timer_list *timer,
+ const char *name,
+ struct lock_class_key *key)
+{
+ debug_object_init_on_stack(timer, &timer_debug_descr);
+ __init_timer(timer, name, key);
+}
+EXPORT_SYMBOL_GPL(init_timer_on_stack_key);
+
+void destroy_timer_on_stack(struct timer_list *timer)
+{
+ debug_object_free(timer, &timer_debug_descr);
+}
+EXPORT_SYMBOL_GPL(destroy_timer_on_stack);
+
+#else
+static inline void debug_timer_init(struct timer_list *timer) { }
+static inline void debug_timer_activate(struct timer_list *timer) { }
+static inline void debug_timer_deactivate(struct timer_list *timer) { }
+#endif
+
+static void __init_timer(struct timer_list *timer,
+ const char *name,
+ struct lock_class_key *key)
{
timer->entry.next = NULL;
timer->base = __raw_get_cpu_var(tvec_bases);
timer->start_pid = -1;
memset(timer->start_comm, 0, TASK_COMM_LEN);
#endif
+ lockdep_init_map(&timer->lockdep_map, name, key, 0);
+}
+
+/**
+ * init_timer_key - initialize a timer
+ * @timer: the timer to be initialized
+ * @name: name of the timer
+ * @key: lockdep class key of the fake lock used for tracking timer
+ * sync lock dependencies
+ *
+ * init_timer_key() must be done to a timer prior calling *any* of the
+ * other timer functions.
+ */
+void init_timer_key(struct timer_list *timer,
+ const char *name,
+ struct lock_class_key *key)
+{
+ debug_timer_init(timer);
+ __init_timer(timer, name, key);
+}
+EXPORT_SYMBOL(init_timer_key);
+
+void init_timer_deferrable_key(struct timer_list *timer,
+ const char *name,
+ struct lock_class_key *key)
+{
+ init_timer_key(timer, name, key);
+ timer_set_deferrable(timer);
}
-EXPORT_SYMBOL(init_timer);
+EXPORT_SYMBOL(init_timer_deferrable_key);
static inline void detach_timer(struct timer_list *timer,
int clear_pending)
{
struct list_head *entry = &timer->entry;
+ debug_timer_deactivate(timer);
+
__list_del(entry->prev, entry->next);
if (clear_pending)
entry->next = NULL;
* possible to set timer->base = NULL and drop the lock: the timer remains
* locked.
*/
-static tvec_base_t *lock_timer_base(struct timer_list *timer,
+static struct tvec_base *lock_timer_base(struct timer_list *timer,
unsigned long *flags)
__acquires(timer->base->lock)
{
- tvec_base_t *base;
+ struct tvec_base *base;
for (;;) {
- base = timer->base;
+ struct tvec_base *prelock_base = timer->base;
+ base = tbase_get_base(prelock_base);
if (likely(base != NULL)) {
spin_lock_irqsave(&base->lock, *flags);
- if (likely(base == timer->base))
+ if (likely(prelock_base == timer->base))
return base;
/* The timer has migrated to another CPU */
spin_unlock_irqrestore(&base->lock, *flags);
}
}
-int __mod_timer(struct timer_list *timer, unsigned long expires)
+static inline int
+__mod_timer(struct timer_list *timer, unsigned long expires, bool pending_only)
{
- tvec_base_t *base, *new_base;
+ struct tvec_base *base, *new_base;
unsigned long flags;
- int ret = 0;
+ int ret;
+
+ ret = 0;
timer_stats_timer_set_start_info(timer);
BUG_ON(!timer->function);
if (timer_pending(timer)) {
detach_timer(timer, 0);
ret = 1;
+ } else {
+ if (pending_only)
+ goto out_unlock;
}
+ debug_timer_activate(timer);
+
new_base = __get_cpu_var(tvec_bases);
if (base != new_base) {
*/
if (likely(base->running_timer != timer)) {
/* See the comment in lock_timer_base() */
- timer->base = NULL;
+ timer_set_base(timer, NULL);
spin_unlock(&base->lock);
base = new_base;
spin_lock(&base->lock);
- timer->base = base;
+ timer_set_base(timer, base);
}
}
timer->expires = expires;
internal_add_timer(base, timer);
+
+out_unlock:
spin_unlock_irqrestore(&base->lock, flags);
return ret;
}
-EXPORT_SYMBOL(__mod_timer);
-
/**
- * add_timer_on - start a timer on a particular CPU
- * @timer: the timer to be added
- * @cpu: the CPU to start it on
+ * mod_timer_pending - modify a pending timer's timeout
+ * @timer: the pending timer to be modified
+ * @expires: new timeout in jiffies
*
- * This is not very scalable on SMP. Double adds are not possible.
+ * mod_timer_pending() is the same for pending timers as mod_timer(),
+ * but will not re-activate and modify already deleted timers.
+ *
+ * It is useful for unserialized use of timers.
*/
-void add_timer_on(struct timer_list *timer, int cpu)
+int mod_timer_pending(struct timer_list *timer, unsigned long expires)
{
- tvec_base_t *base = per_cpu(tvec_bases, cpu);
- unsigned long flags;
-
- timer_stats_timer_set_start_info(timer);
- BUG_ON(timer_pending(timer) || !timer->function);
- spin_lock_irqsave(&base->lock, flags);
- timer->base = base;
- internal_add_timer(base, timer);
- spin_unlock_irqrestore(&base->lock, flags);
+ return __mod_timer(timer, expires, true);
}
-
+EXPORT_SYMBOL(mod_timer_pending);
/**
* mod_timer - modify a timer's timeout
*/
int mod_timer(struct timer_list *timer, unsigned long expires)
{
- BUG_ON(!timer->function);
-
- timer_stats_timer_set_start_info(timer);
/*
* This is a common optimization triggered by the
* networking code - if the timer is re-modified
if (timer->expires == expires && timer_pending(timer))
return 1;
- return __mod_timer(timer, expires);
+ return __mod_timer(timer, expires, false);
}
-
EXPORT_SYMBOL(mod_timer);
/**
+ * add_timer - start a timer
+ * @timer: the timer to be added
+ *
+ * The kernel will do a ->function(->data) callback from the
+ * timer interrupt at the ->expires point in the future. The
+ * current time is 'jiffies'.
+ *
+ * The timer's ->expires, ->function (and if the handler uses it, ->data)
+ * fields must be set prior calling this function.
+ *
+ * Timers with an ->expires field in the past will be executed in the next
+ * timer tick.
+ */
+void add_timer(struct timer_list *timer)
+{
+ BUG_ON(timer_pending(timer));
+ mod_timer(timer, timer->expires);
+}
+EXPORT_SYMBOL(add_timer);
+
+/**
+ * add_timer_on - start a timer on a particular CPU
+ * @timer: the timer to be added
+ * @cpu: the CPU to start it on
+ *
+ * This is not very scalable on SMP. Double adds are not possible.
+ */
+void add_timer_on(struct timer_list *timer, int cpu)
+{
+ struct tvec_base *base = per_cpu(tvec_bases, cpu);
+ unsigned long flags;
+
+ timer_stats_timer_set_start_info(timer);
+ BUG_ON(timer_pending(timer) || !timer->function);
+ spin_lock_irqsave(&base->lock, flags);
+ timer_set_base(timer, base);
+ debug_timer_activate(timer);
+ internal_add_timer(base, timer);
+ /*
+ * Check whether the other CPU is idle and needs to be
+ * triggered to reevaluate the timer wheel when nohz is
+ * active. We are protected against the other CPU fiddling
+ * with the timer by holding the timer base lock. This also
+ * makes sure that a CPU on the way to idle can not evaluate
+ * the timer wheel.
+ */
+ wake_up_idle_cpu(cpu);
+ spin_unlock_irqrestore(&base->lock, flags);
+}
+
+/**
* del_timer - deactive a timer.
* @timer: the timer to be deactivated
*
*/
int del_timer(struct timer_list *timer)
{
- tvec_base_t *base;
+ struct tvec_base *base;
unsigned long flags;
int ret = 0;
return ret;
}
-
EXPORT_SYMBOL(del_timer);
#ifdef CONFIG_SMP
*/
int try_to_del_timer_sync(struct timer_list *timer)
{
- tvec_base_t *base;
+ struct tvec_base *base;
unsigned long flags;
int ret = -1;
return ret;
}
+EXPORT_SYMBOL(try_to_del_timer_sync);
/**
* del_timer_sync - deactivate a timer and wait for the handler to finish.
*/
int del_timer_sync(struct timer_list *timer)
{
+#ifdef CONFIG_LOCKDEP
+ unsigned long flags;
+
+ local_irq_save(flags);
+ lock_map_acquire(&timer->lockdep_map);
+ lock_map_release(&timer->lockdep_map);
+ local_irq_restore(flags);
+#endif
+
for (;;) {
int ret = try_to_del_timer_sync(timer);
if (ret >= 0)
cpu_relax();
}
}
-
EXPORT_SYMBOL(del_timer_sync);
#endif
-static int cascade(tvec_base_t *base, tvec_t *tv, int index)
+static int cascade(struct tvec_base *base, struct tvec *tv, int index)
{
/* cascade all the timers from tv up one level */
struct timer_list *timer, *tmp;
* don't have to detach them individually.
*/
list_for_each_entry_safe(timer, tmp, &tv_list, entry) {
- BUG_ON(timer->base != base);
+ BUG_ON(tbase_get_base(timer->base) != base);
internal_add_timer(base, timer);
}
* This function cascades all vectors and executes all expired timer
* vectors.
*/
-static inline void __run_timers(tvec_base_t *base)
+static inline void __run_timers(struct tvec_base *base)
{
struct timer_list *timer;
while (time_after_eq(jiffies, base->timer_jiffies)) {
struct list_head work_list;
struct list_head *head = &work_list;
- int index = base->timer_jiffies & TVR_MASK;
+ int index = base->timer_jiffies & TVR_MASK;
/*
* Cascade timers:
void (*fn)(unsigned long);
unsigned long data;
- timer = list_entry(head->next,struct timer_list,entry);
- fn = timer->function;
- data = timer->data;
+ timer = list_first_entry(head, struct timer_list,entry);
+ fn = timer->function;
+ data = timer->data;
timer_stats_account_timer(timer);
set_running_timer(base, timer);
detach_timer(timer, 1);
+
spin_unlock_irq(&base->lock);
{
int preempt_count = preempt_count();
+
+#ifdef CONFIG_LOCKDEP
+ /*
+ * It is permissible to free the timer from
+ * inside the function that is called from
+ * it, this we need to take into account for
+ * lockdep too. To avoid bogus "held lock
+ * freed" warnings as well as problems when
+ * looking into timer->lockdep_map, make a
+ * copy and use that here.
+ */
+ struct lockdep_map lockdep_map =
+ timer->lockdep_map;
+#endif
+ /*
+ * Couple the lock chain with the lock chain at
+ * del_timer_sync() by acquiring the lock_map
+ * around the fn() call here and in
+ * del_timer_sync().
+ */
+ lock_map_acquire(&lockdep_map);
+
fn(data);
+
+ lock_map_release(&lockdep_map);
+
if (preempt_count != preempt_count()) {
- printk(KERN_WARNING "huh, entered %p "
+ printk(KERN_ERR "huh, entered %p "
"with preempt_count %08x, exited"
" with %08x?\n",
fn, preempt_count,
spin_unlock_irq(&base->lock);
}
-#if defined(CONFIG_NO_IDLE_HZ) || defined(CONFIG_NO_HZ)
+#ifdef CONFIG_NO_HZ
/*
* Find out when the next timer event is due to happen. This
* is used on S/390 to stop all activity when a cpus is idle.
* This functions needs to be called disabled.
*/
-static unsigned long __next_timer_interrupt(tvec_base_t *base)
+static unsigned long __next_timer_interrupt(struct tvec_base *base)
{
unsigned long timer_jiffies = base->timer_jiffies;
- unsigned long expires = timer_jiffies + (LONG_MAX >> 1);
+ unsigned long expires = timer_jiffies + NEXT_TIMER_MAX_DELTA;
int index, slot, array, found = 0;
struct timer_list *nte;
- tvec_t *varray[4];
+ struct tvec *varray[4];
/* Look for timer events in tv1. */
index = slot = timer_jiffies & TVR_MASK;
do {
list_for_each_entry(nte, base->tv1.vec + slot, entry) {
+ if (tbase_get_deferrable(nte->base))
+ continue;
+
found = 1;
expires = nte->expires;
/* Look at the cascade bucket(s)? */
varray[3] = &base->tv5;
for (array = 0; array < 4; array++) {
- tvec_t *varp = varray[array];
+ struct tvec *varp = varray[array];
index = slot = timer_jiffies & TVN_MASK;
do {
tsdelta = ktime_to_timespec(hr_delta);
delta = timespec_to_jiffies(&tsdelta);
+
+ /*
+ * Limit the delta to the max value, which is checked in
+ * tick_nohz_stop_sched_tick():
+ */
+ if (delta > NEXT_TIMER_MAX_DELTA)
+ delta = NEXT_TIMER_MAX_DELTA;
+
/*
* Take rounding errors in to account and make sure, that it
* expires in the next tick. Otherwise we go into an endless
}
/**
- * next_timer_interrupt - return the jiffy of the next pending timer
+ * get_next_timer_interrupt - return the jiffy of the next pending timer
* @now: current time (in jiffies)
*/
unsigned long get_next_timer_interrupt(unsigned long now)
{
- tvec_base_t *base = __get_cpu_var(tvec_bases);
+ struct tvec_base *base = __get_cpu_var(tvec_bases);
unsigned long expires;
spin_lock(&base->lock);
return cmp_next_hrtimer_event(now, expires);
}
-
-#ifdef CONFIG_NO_IDLE_HZ
-unsigned long next_timer_interrupt(void)
-{
- return get_next_timer_interrupt(jiffies);
-}
#endif
-#endif
-
-/******************************************************************/
-
-/*
- * The current time
- * wall_to_monotonic is what we need to add to xtime (or xtime corrected
- * for sub jiffie times) to get to monotonic time. Monotonic is pegged
- * at zero at system boot time, so wall_to_monotonic will be negative,
- * however, we will ALWAYS keep the tv_nsec part positive so we can use
- * the usual normalization.
- */
-struct timespec xtime __attribute__ ((aligned (16)));
-struct timespec wall_to_monotonic __attribute__ ((aligned (16)));
-
-EXPORT_SYMBOL(xtime);
-
-
-/* XXX - all of this timekeeping code should be later moved to time.c */
-#include <linux/clocksource.h>
-static struct clocksource *clock; /* pointer to current clocksource */
-
-#ifdef CONFIG_GENERIC_TIME
-/**
- * __get_nsec_offset - Returns nanoseconds since last call to periodic_hook
- *
- * private function, must hold xtime_lock lock when being
- * called. Returns the number of nanoseconds since the
- * last call to update_wall_time() (adjusted by NTP scaling)
- */
-static inline s64 __get_nsec_offset(void)
-{
- cycle_t cycle_now, cycle_delta;
- s64 ns_offset;
-
- /* read clocksource: */
- cycle_now = clocksource_read(clock);
-
- /* calculate the delta since the last update_wall_time: */
- cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
-
- /* convert to nanoseconds: */
- ns_offset = cyc2ns(clock, cycle_delta);
-
- return ns_offset;
-}
-
-/**
- * __get_realtime_clock_ts - Returns the time of day in a timespec
- * @ts: pointer to the timespec to be set
- *
- * Returns the time of day in a timespec. Used by
- * do_gettimeofday() and get_realtime_clock_ts().
- */
-static inline void __get_realtime_clock_ts(struct timespec *ts)
-{
- unsigned long seq;
- s64 nsecs;
-
- do {
- seq = read_seqbegin(&xtime_lock);
-
- *ts = xtime;
- nsecs = __get_nsec_offset();
-
- } while (read_seqretry(&xtime_lock, seq));
-
- timespec_add_ns(ts, nsecs);
-}
-
-/**
- * getnstimeofday - Returns the time of day in a timespec
- * @ts: pointer to the timespec to be set
- *
- * Returns the time of day in a timespec.
- */
-void getnstimeofday(struct timespec *ts)
-{
- __get_realtime_clock_ts(ts);
-}
-
-EXPORT_SYMBOL(getnstimeofday);
-
-/**
- * do_gettimeofday - Returns the time of day in a timeval
- * @tv: pointer to the timeval to be set
- *
- * NOTE: Users should be converted to using get_realtime_clock_ts()
- */
-void do_gettimeofday(struct timeval *tv)
-{
- struct timespec now;
-
- __get_realtime_clock_ts(&now);
- tv->tv_sec = now.tv_sec;
- tv->tv_usec = now.tv_nsec/1000;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-/**
- * do_settimeofday - Sets the time of day
- * @tv: pointer to the timespec variable containing the new time
- *
- * Sets the time of day to the new time and update NTP and notify hrtimers
- */
-int do_settimeofday(struct timespec *tv)
-{
- unsigned long flags;
- time_t wtm_sec, sec = tv->tv_sec;
- long wtm_nsec, nsec = tv->tv_nsec;
-
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- write_seqlock_irqsave(&xtime_lock, flags);
-
- nsec -= __get_nsec_offset();
-
- wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
- wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
- set_normalized_timespec(&xtime, sec, nsec);
- set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
- clock->error = 0;
- ntp_clear();
-
- update_vsyscall(&xtime, clock);
-
- write_sequnlock_irqrestore(&xtime_lock, flags);
-
- /* signal hrtimers about time change */
- clock_was_set();
-
- return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
-/**
- * change_clocksource - Swaps clocksources if a new one is available
- *
- * Accumulates current time interval and initializes new clocksource
- */
-static void change_clocksource(void)
-{
- struct clocksource *new;
- cycle_t now;
- u64 nsec;
-
- new = clocksource_get_next();
-
- if (clock == new)
- return;
-
- now = clocksource_read(new);
- nsec = __get_nsec_offset();
- timespec_add_ns(&xtime, nsec);
-
- clock = new;
- clock->cycle_last = now;
-
- clock->error = 0;
- clock->xtime_nsec = 0;
- clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
-
- tick_clock_notify();
-
- printk(KERN_INFO "Time: %s clocksource has been installed.\n",
- clock->name);
-}
-#else
-static inline void change_clocksource(void) { }
-#endif
-
-/**
- * timekeeping_is_continuous - check to see if timekeeping is free running
- */
-int timekeeping_is_continuous(void)
-{
- unsigned long seq;
- int ret;
-
- do {
- seq = read_seqbegin(&xtime_lock);
-
- ret = clock->flags & CLOCK_SOURCE_VALID_FOR_HRES;
-
- } while (read_seqretry(&xtime_lock, seq));
-
- return ret;
-}
-
-/**
- * read_persistent_clock - Return time in seconds from the persistent clock.
- *
- * Weak dummy function for arches that do not yet support it.
- * Returns seconds from epoch using the battery backed persistent clock.
- * Returns zero if unsupported.
- *
- * XXX - Do be sure to remove it once all arches implement it.
- */
-unsigned long __attribute__((weak)) read_persistent_clock(void)
-{
- return 0;
-}
-
-/*
- * timekeeping_init - Initializes the clocksource and common timekeeping values
- */
-void __init timekeeping_init(void)
-{
- unsigned long flags;
- unsigned long sec = read_persistent_clock();
-
- write_seqlock_irqsave(&xtime_lock, flags);
-
- ntp_clear();
-
- clock = clocksource_get_next();
- clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
- clock->cycle_last = clocksource_read(clock);
-
- xtime.tv_sec = sec;
- xtime.tv_nsec = 0;
- set_normalized_timespec(&wall_to_monotonic,
- -xtime.tv_sec, -xtime.tv_nsec);
-
- write_sequnlock_irqrestore(&xtime_lock, flags);
-}
-
-/* flag for if timekeeping is suspended */
-static int timekeeping_suspended;
-/* time in seconds when suspend began */
-static unsigned long timekeeping_suspend_time;
-
-/**
- * timekeeping_resume - Resumes the generic timekeeping subsystem.
- * @dev: unused
- *
- * This is for the generic clocksource timekeeping.
- * xtime/wall_to_monotonic/jiffies/etc are
- * still managed by arch specific suspend/resume code.
- */
-static int timekeeping_resume(struct sys_device *dev)
-{
- unsigned long flags;
- unsigned long now = read_persistent_clock();
-
- write_seqlock_irqsave(&xtime_lock, flags);
-
- if (now && (now > timekeeping_suspend_time)) {
- unsigned long sleep_length = now - timekeeping_suspend_time;
-
- xtime.tv_sec += sleep_length;
- wall_to_monotonic.tv_sec -= sleep_length;
- }
- /* re-base the last cycle value */
- clock->cycle_last = clocksource_read(clock);
- clock->error = 0;
- timekeeping_suspended = 0;
- write_sequnlock_irqrestore(&xtime_lock, flags);
-
- touch_softlockup_watchdog();
-
- clockevents_notify(CLOCK_EVT_NOTIFY_RESUME, NULL);
-
- /* Resume hrtimers */
- hres_timers_resume();
-
- return 0;
-}
-
-static int timekeeping_suspend(struct sys_device *dev, pm_message_t state)
-{
- unsigned long flags;
-
- write_seqlock_irqsave(&xtime_lock, flags);
- timekeeping_suspended = 1;
- timekeeping_suspend_time = read_persistent_clock();
- write_sequnlock_irqrestore(&xtime_lock, flags);
-
- clockevents_notify(CLOCK_EVT_NOTIFY_SUSPEND, NULL);
-
- return 0;
-}
-
-/* sysfs resume/suspend bits for timekeeping */
-static struct sysdev_class timekeeping_sysclass = {
- .resume = timekeeping_resume,
- .suspend = timekeeping_suspend,
- set_kset_name("timekeeping"),
-};
-
-static struct sys_device device_timer = {
- .id = 0,
- .cls = &timekeeping_sysclass,
-};
-
-static int __init timekeeping_init_device(void)
-{
- int error = sysdev_class_register(&timekeeping_sysclass);
- if (!error)
- error = sysdev_register(&device_timer);
- return error;
-}
-
-device_initcall(timekeeping_init_device);
-
-/*
- * If the error is already larger, we look ahead even further
- * to compensate for late or lost adjustments.
- */
-static __always_inline int clocksource_bigadjust(s64 error, s64 *interval,
- s64 *offset)
-{
- s64 tick_error, i;
- u32 look_ahead, adj;
- s32 error2, mult;
-
- /*
- * Use the current error value to determine how much to look ahead.
- * The larger the error the slower we adjust for it to avoid problems
- * with losing too many ticks, otherwise we would overadjust and
- * produce an even larger error. The smaller the adjustment the
- * faster we try to adjust for it, as lost ticks can do less harm
- * here. This is tuned so that an error of about 1 msec is adusted
- * within about 1 sec (or 2^20 nsec in 2^SHIFT_HZ ticks).
- */
- error2 = clock->error >> (TICK_LENGTH_SHIFT + 22 - 2 * SHIFT_HZ);
- error2 = abs(error2);
- for (look_ahead = 0; error2 > 0; look_ahead++)
- error2 >>= 2;
-
- /*
- * Now calculate the error in (1 << look_ahead) ticks, but first
- * remove the single look ahead already included in the error.
- */
- tick_error = current_tick_length() >>
- (TICK_LENGTH_SHIFT - clock->shift + 1);
- tick_error -= clock->xtime_interval >> 1;
- error = ((error - tick_error) >> look_ahead) + tick_error;
-
- /* Finally calculate the adjustment shift value. */
- i = *interval;
- mult = 1;
- if (error < 0) {
- error = -error;
- *interval = -*interval;
- *offset = -*offset;
- mult = -1;
- }
- for (adj = 0; error > i; adj++)
- error >>= 1;
-
- *interval <<= adj;
- *offset <<= adj;
- return mult << adj;
-}
-
-/*
- * Adjust the multiplier to reduce the error value,
- * this is optimized for the most common adjustments of -1,0,1,
- * for other values we can do a bit more work.
- */
-static void clocksource_adjust(struct clocksource *clock, s64 offset)
-{
- s64 error, interval = clock->cycle_interval;
- int adj;
-
- error = clock->error >> (TICK_LENGTH_SHIFT - clock->shift - 1);
- if (error > interval) {
- error >>= 2;
- if (likely(error <= interval))
- adj = 1;
- else
- adj = clocksource_bigadjust(error, &interval, &offset);
- } else if (error < -interval) {
- error >>= 2;
- if (likely(error >= -interval)) {
- adj = -1;
- interval = -interval;
- offset = -offset;
- } else
- adj = clocksource_bigadjust(error, &interval, &offset);
- } else
- return;
-
- clock->mult += adj;
- clock->xtime_interval += interval;
- clock->xtime_nsec -= offset;
- clock->error -= (interval - offset) <<
- (TICK_LENGTH_SHIFT - clock->shift);
-}
-
-/**
- * update_wall_time - Uses the current clocksource to increment the wall time
- *
- * Called from the timer interrupt, must hold a write on xtime_lock.
- */
-static void update_wall_time(void)
-{
- cycle_t offset;
-
- /* Make sure we're fully resumed: */
- if (unlikely(timekeeping_suspended))
- return;
-
-#ifdef CONFIG_GENERIC_TIME
- offset = (clocksource_read(clock) - clock->cycle_last) & clock->mask;
-#else
- offset = clock->cycle_interval;
-#endif
- clock->xtime_nsec += (s64)xtime.tv_nsec << clock->shift;
-
- /* normally this loop will run just once, however in the
- * case of lost or late ticks, it will accumulate correctly.
- */
- while (offset >= clock->cycle_interval) {
- /* accumulate one interval */
- clock->xtime_nsec += clock->xtime_interval;
- clock->cycle_last += clock->cycle_interval;
- offset -= clock->cycle_interval;
-
- if (clock->xtime_nsec >= (u64)NSEC_PER_SEC << clock->shift) {
- clock->xtime_nsec -= (u64)NSEC_PER_SEC << clock->shift;
- xtime.tv_sec++;
- second_overflow();
- }
-
- /* interpolator bits */
- time_interpolator_update(clock->xtime_interval
- >> clock->shift);
-
- /* accumulate error between NTP and clock interval */
- clock->error += current_tick_length();
- clock->error -= clock->xtime_interval << (TICK_LENGTH_SHIFT - clock->shift);
- }
-
- /* correct the clock when NTP error is too big */
- clocksource_adjust(clock, offset);
-
- /* store full nanoseconds into xtime */
- xtime.tv_nsec = (s64)clock->xtime_nsec >> clock->shift;
- clock->xtime_nsec -= (s64)xtime.tv_nsec << clock->shift;
-
- /* check to see if there is a new clocksource to use */
- change_clocksource();
- update_vsyscall(&xtime, clock);
-}
-
/*
- * Called from the timer interrupt handler to charge one tick to the current
+ * Called from the timer interrupt handler to charge one tick to the current
* process. user_tick is 1 if the tick is user time, 0 for system.
*/
void update_process_times(int user_tick)
int cpu = smp_processor_id();
/* Note: this timer irq context must be accounted for as well. */
- if (user_tick)
- account_user_time(p, jiffies_to_cputime(1));
- else
- account_system_time(p, HARDIRQ_OFFSET, jiffies_to_cputime(1));
+ account_process_tick(p, user_tick);
run_local_timers();
if (rcu_pending(cpu))
rcu_check_callbacks(cpu, user_tick);
+ printk_tick();
scheduler_tick();
- run_posix_cpu_timers(p);
+ run_posix_cpu_timers(p);
}
/*
}
/*
- * This read-write spinlock protects us from races in SMP while
- * playing with xtime and avenrun.
- */
-__attribute__((weak)) __cacheline_aligned_in_smp DEFINE_SEQLOCK(xtime_lock);
-
-EXPORT_SYMBOL(xtime_lock);
-
-/*
* This function runs timers and the timer-tq in bottom half context.
*/
static void run_timer_softirq(struct softirq_action *h)
{
- tvec_base_t *base = __get_cpu_var(tvec_bases);
+ struct tvec_base *base = __get_cpu_var(tvec_bases);
- hrtimer_run_queues();
+ hrtimer_run_pending();
if (time_after_eq(jiffies, base->timer_jiffies))
__run_timers(base);
*/
void run_local_timers(void)
{
+ hrtimer_run_queues();
raise_softirq(TIMER_SOFTIRQ);
softlockup_tick();
}
update_wall_time();
calc_load(ticks);
}
-
+
/*
* The 64-bit jiffies value is not atomic - you MUST NOT read it
* without sampling the sequence number in xtime_lock.
* For backwards compatibility? This can be done in libc so Alpha
* and all newer ports shouldn't need it.
*/
-asmlinkage unsigned long sys_alarm(unsigned int seconds)
+SYSCALL_DEFINE1(alarm, unsigned int, seconds)
{
return alarm_setitimer(seconds);
}
*
* This is SMP safe as current->tgid does not change.
*/
-asmlinkage long sys_getpid(void)
+SYSCALL_DEFINE0(getpid)
{
- return current->tgid;
+ return task_tgid_vnr(current);
}
/*
* value of ->real_parent under rcu_read_lock(), see
* release_task()->call_rcu(delayed_put_task_struct).
*/
-asmlinkage long sys_getppid(void)
+SYSCALL_DEFINE0(getppid)
{
int pid;
rcu_read_lock();
- pid = rcu_dereference(current->real_parent)->tgid;
+ pid = task_tgid_vnr(current->real_parent);
rcu_read_unlock();
return pid;
}
-asmlinkage long sys_getuid(void)
+SYSCALL_DEFINE0(getuid)
{
/* Only we change this so SMP safe */
- return current->uid;
+ return current_uid();
}
-asmlinkage long sys_geteuid(void)
+SYSCALL_DEFINE0(geteuid)
{
/* Only we change this so SMP safe */
- return current->euid;
+ return current_euid();
}
-asmlinkage long sys_getgid(void)
+SYSCALL_DEFINE0(getgid)
{
/* Only we change this so SMP safe */
- return current->gid;
+ return current_gid();
}
-asmlinkage long sys_getegid(void)
+SYSCALL_DEFINE0(getegid)
{
/* Only we change this so SMP safe */
- return current->egid;
+ return current_egid();
}
#endif
*
* In all cases the return value is guaranteed to be non-negative.
*/
-fastcall signed long __sched schedule_timeout(signed long timeout)
+signed long __sched schedule_timeout(signed long timeout)
{
struct timer_list timer;
unsigned long expire;
expire = timeout + jiffies;
- setup_timer(&timer, process_timeout, (unsigned long)current);
- __mod_timer(&timer, expire);
+ setup_timer_on_stack(&timer, process_timeout, (unsigned long)current);
+ __mod_timer(&timer, expire, false);
schedule();
del_singleshot_timer_sync(&timer);
+ /* Remove the timer from the object tracker */
+ destroy_timer_on_stack(&timer);
+
timeout = expire - jiffies;
out:
}
EXPORT_SYMBOL(schedule_timeout_interruptible);
+signed long __sched schedule_timeout_killable(signed long timeout)
+{
+ __set_current_state(TASK_KILLABLE);
+ return schedule_timeout(timeout);
+}
+EXPORT_SYMBOL(schedule_timeout_killable);
+
signed long __sched schedule_timeout_uninterruptible(signed long timeout)
{
__set_current_state(TASK_UNINTERRUPTIBLE);
EXPORT_SYMBOL(schedule_timeout_uninterruptible);
/* Thread ID - the internal kernel "pid" */
-asmlinkage long sys_gettid(void)
+SYSCALL_DEFINE0(gettid)
{
- return current->pid;
+ return task_pid_vnr(current);
}
/**
* do_sysinfo - fill in sysinfo struct
* @info: pointer to buffer to fill
- */
+ */
int do_sysinfo(struct sysinfo *info)
{
unsigned long mem_total, sav_total;
getnstimeofday(&tp);
tp.tv_sec += wall_to_monotonic.tv_sec;
tp.tv_nsec += wall_to_monotonic.tv_nsec;
+ monotonic_to_bootbased(&tp);
if (tp.tv_nsec - NSEC_PER_SEC >= 0) {
tp.tv_nsec = tp.tv_nsec - NSEC_PER_SEC;
tp.tv_sec++;
return 0;
}
-asmlinkage long sys_sysinfo(struct sysinfo __user *info)
+SYSCALL_DEFINE1(sysinfo, struct sysinfo __user *, info)
{
struct sysinfo val;
return 0;
}
-/*
- * lockdep: we want to track each per-CPU base as a separate lock-class,
- * but timer-bases are kmalloc()-ed, so we need to attach separate
- * keys to them:
- */
-static struct lock_class_key base_lock_keys[NR_CPUS];
-
-static int __devinit init_timers_cpu(int cpu)
+static int __cpuinit init_timers_cpu(int cpu)
{
int j;
- tvec_base_t *base;
- static char __devinitdata tvec_base_done[NR_CPUS];
+ struct tvec_base *base;
+ static char __cpuinitdata tvec_base_done[NR_CPUS];
if (!tvec_base_done[cpu]) {
static char boot_done;
/*
* The APs use this path later in boot
*/
- base = kmalloc_node(sizeof(*base), GFP_KERNEL,
+ base = kmalloc_node(sizeof(*base),
+ GFP_KERNEL | __GFP_ZERO,
cpu_to_node(cpu));
if (!base)
return -ENOMEM;
- memset(base, 0, sizeof(*base));
+
+ /* Make sure that tvec_base is 2 byte aligned */
+ if (tbase_get_deferrable(base)) {
+ WARN_ON(1);
+ kfree(base);
+ return -ENOMEM;
+ }
per_cpu(tvec_bases, cpu) = base;
} else {
/*
}
spin_lock_init(&base->lock);
- lockdep_set_class(&base->lock, base_lock_keys + cpu);
for (j = 0; j < TVN_SIZE; j++) {
INIT_LIST_HEAD(base->tv5.vec + j);
}
#ifdef CONFIG_HOTPLUG_CPU
-static void migrate_timer_list(tvec_base_t *new_base, struct list_head *head)
+static void migrate_timer_list(struct tvec_base *new_base, struct list_head *head)
{
struct timer_list *timer;
while (!list_empty(head)) {
- timer = list_entry(head->next, struct timer_list, entry);
+ timer = list_first_entry(head, struct timer_list, entry);
detach_timer(timer, 0);
- timer->base = new_base;
+ timer_set_base(timer, new_base);
internal_add_timer(new_base, timer);
}
}
-static void __devinit migrate_timers(int cpu)
+static void __cpuinit migrate_timers(int cpu)
{
- tvec_base_t *old_base;
- tvec_base_t *new_base;
+ struct tvec_base *old_base;
+ struct tvec_base *new_base;
int i;
BUG_ON(cpu_online(cpu));
old_base = per_cpu(tvec_bases, cpu);
new_base = get_cpu_var(tvec_bases);
-
- local_irq_disable();
- double_spin_lock(&new_base->lock, &old_base->lock,
- smp_processor_id() < cpu);
+ /*
+ * The caller is globally serialized and nobody else
+ * takes two locks at once, deadlock is not possible.
+ */
+ spin_lock_irq(&new_base->lock);
+ spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING);
BUG_ON(old_base->running_timer);
migrate_timer_list(new_base, old_base->tv5.vec + i);
}
- double_spin_unlock(&new_base->lock, &old_base->lock,
- smp_processor_id() < cpu);
- local_irq_enable();
+ spin_unlock(&old_base->lock);
+ spin_unlock_irq(&new_base->lock);
put_cpu_var(tvec_bases);
}
#endif /* CONFIG_HOTPLUG_CPU */
long cpu = (long)hcpu;
switch(action) {
case CPU_UP_PREPARE:
+ case CPU_UP_PREPARE_FROZEN:
if (init_timers_cpu(cpu) < 0)
return NOTIFY_BAD;
break;
#ifdef CONFIG_HOTPLUG_CPU
case CPU_DEAD:
+ case CPU_DEAD_FROZEN:
migrate_timers(cpu);
break;
#endif
BUG_ON(err == NOTIFY_BAD);
register_cpu_notifier(&timers_nb);
- open_softirq(TIMER_SOFTIRQ, run_timer_softirq, NULL);
-}
-
-#ifdef CONFIG_TIME_INTERPOLATION
-
-struct time_interpolator *time_interpolator __read_mostly;
-static struct time_interpolator *time_interpolator_list __read_mostly;
-static DEFINE_SPINLOCK(time_interpolator_lock);
-
-static inline cycles_t time_interpolator_get_cycles(unsigned int src)
-{
- unsigned long (*x)(void);
-
- switch (src)
- {
- case TIME_SOURCE_FUNCTION:
- x = time_interpolator->addr;
- return x();
-
- case TIME_SOURCE_MMIO64 :
- return readq_relaxed((void __iomem *)time_interpolator->addr);
-
- case TIME_SOURCE_MMIO32 :
- return readl_relaxed((void __iomem *)time_interpolator->addr);
-
- default: return get_cycles();
- }
-}
-
-static inline u64 time_interpolator_get_counter(int writelock)
-{
- unsigned int src = time_interpolator->source;
-
- if (time_interpolator->jitter)
- {
- cycles_t lcycle;
- cycles_t now;
-
- do {
- lcycle = time_interpolator->last_cycle;
- now = time_interpolator_get_cycles(src);
- if (lcycle && time_after(lcycle, now))
- return lcycle;
-
- /* When holding the xtime write lock, there's no need
- * to add the overhead of the cmpxchg. Readers are
- * force to retry until the write lock is released.
- */
- if (writelock) {
- time_interpolator->last_cycle = now;
- return now;
- }
- /* Keep track of the last timer value returned. The use of cmpxchg here
- * will cause contention in an SMP environment.
- */
- } while (unlikely(cmpxchg(&time_interpolator->last_cycle, lcycle, now) != lcycle));
- return now;
- }
- else
- return time_interpolator_get_cycles(src);
-}
-
-void time_interpolator_reset(void)
-{
- time_interpolator->offset = 0;
- time_interpolator->last_counter = time_interpolator_get_counter(1);
-}
-
-#define GET_TI_NSECS(count,i) (((((count) - i->last_counter) & (i)->mask) * (i)->nsec_per_cyc) >> (i)->shift)
-
-unsigned long time_interpolator_get_offset(void)
-{
- /* If we do not have a time interpolator set up then just return zero */
- if (!time_interpolator)
- return 0;
-
- return time_interpolator->offset +
- GET_TI_NSECS(time_interpolator_get_counter(0), time_interpolator);
-}
-
-#define INTERPOLATOR_ADJUST 65536
-#define INTERPOLATOR_MAX_SKIP 10*INTERPOLATOR_ADJUST
-
-void time_interpolator_update(long delta_nsec)
-{
- u64 counter;
- unsigned long offset;
-
- /* If there is no time interpolator set up then do nothing */
- if (!time_interpolator)
- return;
-
- /*
- * The interpolator compensates for late ticks by accumulating the late
- * time in time_interpolator->offset. A tick earlier than expected will
- * lead to a reset of the offset and a corresponding jump of the clock
- * forward. Again this only works if the interpolator clock is running
- * slightly slower than the regular clock and the tuning logic insures
- * that.
- */
-
- counter = time_interpolator_get_counter(1);
- offset = time_interpolator->offset +
- GET_TI_NSECS(counter, time_interpolator);
-
- if (delta_nsec < 0 || (unsigned long) delta_nsec < offset)
- time_interpolator->offset = offset - delta_nsec;
- else {
- time_interpolator->skips++;
- time_interpolator->ns_skipped += delta_nsec - offset;
- time_interpolator->offset = 0;
- }
- time_interpolator->last_counter = counter;
-
- /* Tuning logic for time interpolator invoked every minute or so.
- * Decrease interpolator clock speed if no skips occurred and an offset is carried.
- * Increase interpolator clock speed if we skip too much time.
- */
- if (jiffies % INTERPOLATOR_ADJUST == 0)
- {
- if (time_interpolator->skips == 0 && time_interpolator->offset > tick_nsec)
- time_interpolator->nsec_per_cyc--;
- if (time_interpolator->ns_skipped > INTERPOLATOR_MAX_SKIP && time_interpolator->offset == 0)
- time_interpolator->nsec_per_cyc++;
- time_interpolator->skips = 0;
- time_interpolator->ns_skipped = 0;
- }
-}
-
-static inline int
-is_better_time_interpolator(struct time_interpolator *new)
-{
- if (!time_interpolator)
- return 1;
- return new->frequency > 2*time_interpolator->frequency ||
- (unsigned long)new->drift < (unsigned long)time_interpolator->drift;
-}
-
-void
-register_time_interpolator(struct time_interpolator *ti)
-{
- unsigned long flags;
-
- /* Sanity check */
- BUG_ON(ti->frequency == 0 || ti->mask == 0);
-
- ti->nsec_per_cyc = ((u64)NSEC_PER_SEC << ti->shift) / ti->frequency;
- spin_lock(&time_interpolator_lock);
- write_seqlock_irqsave(&xtime_lock, flags);
- if (is_better_time_interpolator(ti)) {
- time_interpolator = ti;
- time_interpolator_reset();
- }
- write_sequnlock_irqrestore(&xtime_lock, flags);
-
- ti->next = time_interpolator_list;
- time_interpolator_list = ti;
- spin_unlock(&time_interpolator_lock);
-}
-
-void
-unregister_time_interpolator(struct time_interpolator *ti)
-{
- struct time_interpolator *curr, **prev;
- unsigned long flags;
-
- spin_lock(&time_interpolator_lock);
- prev = &time_interpolator_list;
- for (curr = *prev; curr; curr = curr->next) {
- if (curr == ti) {
- *prev = curr->next;
- break;
- }
- prev = &curr->next;
- }
-
- write_seqlock_irqsave(&xtime_lock, flags);
- if (ti == time_interpolator) {
- /* we lost the best time-interpolator: */
- time_interpolator = NULL;
- /* find the next-best interpolator */
- for (curr = time_interpolator_list; curr; curr = curr->next)
- if (is_better_time_interpolator(curr))
- time_interpolator = curr;
- time_interpolator_reset();
- }
- write_sequnlock_irqrestore(&xtime_lock, flags);
- spin_unlock(&time_interpolator_lock);
+ open_softirq(TIMER_SOFTIRQ, run_timer_softirq);
}
-#endif /* CONFIG_TIME_INTERPOLATION */
/**
* msleep - sleep safely even with waitqueue interruptions
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff