mmc: s3c6410: enable ADMA feature in 6410 sdhci controller

[safe/jmp/linux-2.6] / kernel / rcutree_plugin.h

diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index ed241fc..0e4f420 100644 (file)
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -26,6 +26,45 @@
 
 #include <linux/delay.h>
 
+/*
+ * Check the RCU kernel configuration parameters and print informative
+ * messages about anything out of the ordinary.  If you like #ifdef, you
+ * will love this function.
+ */
+static void __init rcu_bootup_announce_oddness(void)
+{
+#ifdef CONFIG_RCU_TRACE
+       printk(KERN_INFO "\tRCU debugfs-based tracing is enabled.\n");
+#endif
+#if (defined(CONFIG_64BIT) && CONFIG_RCU_FANOUT != 64) || (!defined(CONFIG_64BIT) && CONFIG_RCU_FANOUT != 32)
+       printk(KERN_INFO "\tCONFIG_RCU_FANOUT set to non-default value of %d\n",
+              CONFIG_RCU_FANOUT);
+#endif
+#ifdef CONFIG_RCU_FANOUT_EXACT
+       printk(KERN_INFO "\tHierarchical RCU autobalancing is disabled.\n");
+#endif
+#ifdef CONFIG_RCU_FAST_NO_HZ
+       printk(KERN_INFO
+              "\tRCU dyntick-idle grace-period acceleration is enabled.\n");
+#endif
+#ifdef CONFIG_PROVE_RCU
+       printk(KERN_INFO "\tRCU lockdep checking is enabled.\n");
+#endif
+#ifdef CONFIG_RCU_TORTURE_TEST_RUNNABLE
+       printk(KERN_INFO "\tRCU torture testing starts during boot.\n");
+#endif
+#ifndef CONFIG_RCU_CPU_STALL_DETECTOR
+       printk(KERN_INFO
+              "\tRCU-based detection of stalled CPUs is disabled.\n");
+#endif
+#ifndef CONFIG_RCU_CPU_STALL_VERBOSE
+       printk(KERN_INFO "\tVerbose stalled-CPUs detection is disabled.\n");
+#endif
+#if NUM_RCU_LVL_4 != 0
+       printk(KERN_INFO "\tExperimental four-level hierarchy is enabled.\n");
+#endif
+}
+
 #ifdef CONFIG_TREE_PREEMPT_RCU
 
 struct rcu_state rcu_preempt_state = RCU_STATE_INITIALIZER(rcu_preempt_state);
@@ -38,8 +77,8 @@ static int rcu_preempted_readers_exp(struct rcu_node *rnp);
  */
 static void __init rcu_bootup_announce(void)
 {
-       printk(KERN_INFO
-              "Experimental preemptable hierarchical RCU implementation.\n");
+       printk(KERN_INFO "Preemptable hierarchical RCU implementation.\n");
+       rcu_bootup_announce_oddness();
 }
 
 /*
@@ -75,13 +114,19 @@ EXPORT_SYMBOL_GPL(rcu_force_quiescent_state);
  * that this just means that the task currently running on the CPU is
  * not in a quiescent state.  There might be any number of tasks blocked
  * while in an RCU read-side critical section.
+ *
+ * Unlike the other rcu_*_qs() functions, callers to this function
+ * must disable irqs in order to protect the assignment to
+ * ->rcu_read_unlock_special.
  */
 static void rcu_preempt_qs(int cpu)
 {
        struct rcu_data *rdp = &per_cpu(rcu_preempt_data, cpu);
+
        rdp->passed_quiesc_completed = rdp->gpnum - 1;
        barrier();
        rdp->passed_quiesc = 1;
+       current->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_NEED_QS;
 }
 
 /*
@@ -144,9 +189,8 @@ static void rcu_preempt_note_context_switch(int cpu)
         * grace period, then the fact that the task has been enqueued
         * means that we continue to block the current grace period.
         */
-       rcu_preempt_qs(cpu);
        local_irq_save(flags);
-       t->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_NEED_QS;
+       rcu_preempt_qs(cpu);
        local_irq_restore(flags);
 }
 
@@ -236,7 +280,6 @@ static void rcu_read_unlock_special(struct task_struct *t)
         */
        special = t->rcu_read_unlock_special;
        if (special & RCU_READ_UNLOCK_NEED_QS) {
-               t->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_NEED_QS;
                rcu_preempt_qs(smp_processor_id());
        }
 
@@ -473,7 +516,6 @@ static void rcu_preempt_check_callbacks(int cpu)
        struct task_struct *t = current;
 
        if (t->rcu_read_lock_nesting == 0) {
-               t->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_NEED_QS;
                rcu_preempt_qs(cpu);
                return;
        }
@@ -515,11 +557,13 @@ void synchronize_rcu(void)
        if (!rcu_scheduler_active)
                return;
 
+       init_rcu_head_on_stack(&rcu.head);
        init_completion(&rcu.completion);
        /* Will wake me after RCU finished. */
        call_rcu(&rcu.head, wakeme_after_rcu);
        /* Wait for it. */
        wait_for_completion(&rcu.completion);
+       destroy_rcu_head_on_stack(&rcu.head);
 }
 EXPORT_SYMBOL_GPL(synchronize_rcu);
 
@@ -754,6 +798,7 @@ void exit_rcu(void)
 static void __init rcu_bootup_announce(void)
 {
        printk(KERN_INFO "Hierarchical RCU implementation.\n");
+       rcu_bootup_announce_oddness();
 }
 
 /*
@@ -986,6 +1031,7 @@ static void rcu_needs_cpu_flush(void)
 
 #define RCU_NEEDS_CPU_FLUSHES 5
 static DEFINE_PER_CPU(int, rcu_dyntick_drain);
+static DEFINE_PER_CPU(unsigned long, rcu_dyntick_holdoff);
 
 /*
  * Check to see if any future RCU-related work will need to be done
@@ -1007,14 +1053,27 @@ static DEFINE_PER_CPU(int, rcu_dyntick_drain);
 int rcu_needs_cpu(int cpu)
 {
        int c = 0;
+       int snap;
+       int snap_nmi;
        int thatcpu;
 
+       /* Check for being in the holdoff period. */
+       if (per_cpu(rcu_dyntick_holdoff, cpu) == jiffies)
+               return rcu_needs_cpu_quick_check(cpu);
+
        /* Don't bother unless we are the last non-dyntick-idle CPU. */
-       for_each_cpu_not(thatcpu, nohz_cpu_mask)
-               if (thatcpu != cpu) {
+       for_each_online_cpu(thatcpu) {
+               if (thatcpu == cpu)
+                       continue;
+               snap = per_cpu(rcu_dynticks, thatcpu).dynticks;
+               snap_nmi = per_cpu(rcu_dynticks, thatcpu).dynticks_nmi;
+               smp_mb(); /* Order sampling of snap with end of grace period. */
+               if (((snap & 0x1) != 0) || ((snap_nmi & 0x1) != 0)) {
                        per_cpu(rcu_dyntick_drain, cpu) = 0;
+                       per_cpu(rcu_dyntick_holdoff, cpu) = jiffies - 1;
                        return rcu_needs_cpu_quick_check(cpu);
                }
+       }
 
        /* Check and update the rcu_dyntick_drain sequencing. */
        if (per_cpu(rcu_dyntick_drain, cpu) <= 0) {
@@ -1022,6 +1081,7 @@ int rcu_needs_cpu(int cpu)
                per_cpu(rcu_dyntick_drain, cpu) = RCU_NEEDS_CPU_FLUSHES;
        } else if (--per_cpu(rcu_dyntick_drain, cpu) <= 0) {
                /* We have hit the limit, so time to give up. */
+               per_cpu(rcu_dyntick_holdoff, cpu) = jiffies;
                return rcu_needs_cpu_quick_check(cpu);
        }
 
@@ -1050,10 +1110,13 @@ int rcu_needs_cpu(int cpu)
 static void rcu_needs_cpu_flush(void)
 {
        int cpu = smp_processor_id();
+       unsigned long flags;
 
        if (per_cpu(rcu_dyntick_drain, cpu) <= 0)
                return;
+       local_irq_save(flags);
        (void)rcu_needs_cpu(cpu);
+       local_irq_restore(flags);
 }
 
 #endif /* #else #if !defined(CONFIG_RCU_FAST_NO_HZ) */