#include <linux/delay.h>
+/*
+ * Check the RCU kernel configuration parameters and print informative
+ * messages about anything out of the ordinary. If you like #ifdef, you
+ * will love this function.
+ */
+static void __init rcu_bootup_announce_oddness(void)
+{
+#ifdef CONFIG_RCU_TRACE
+ printk(KERN_INFO "\tRCU debugfs-based tracing is enabled.\n");
+#endif
+#if (defined(CONFIG_64BIT) && CONFIG_RCU_FANOUT != 64) || (!defined(CONFIG_64BIT) && CONFIG_RCU_FANOUT != 32)
+ printk(KERN_INFO "\tCONFIG_RCU_FANOUT set to non-default value of %d\n",
+ CONFIG_RCU_FANOUT);
+#endif
+#ifdef CONFIG_RCU_FANOUT_EXACT
+ printk(KERN_INFO "\tHierarchical RCU autobalancing is disabled.\n");
+#endif
+#ifdef CONFIG_RCU_FAST_NO_HZ
+ printk(KERN_INFO
+ "\tRCU dyntick-idle grace-period acceleration is enabled.\n");
+#endif
+#ifdef CONFIG_PROVE_RCU
+ printk(KERN_INFO "\tRCU lockdep checking is enabled.\n");
+#endif
+#ifdef CONFIG_RCU_TORTURE_TEST_RUNNABLE
+ printk(KERN_INFO "\tRCU torture testing starts during boot.\n");
+#endif
+#ifndef CONFIG_RCU_CPU_STALL_DETECTOR
+ printk(KERN_INFO
+ "\tRCU-based detection of stalled CPUs is disabled.\n");
+#endif
+#ifndef CONFIG_RCU_CPU_STALL_VERBOSE
+ printk(KERN_INFO "\tVerbose stalled-CPUs detection is disabled.\n");
+#endif
+#if NUM_RCU_LVL_4 != 0
+ printk(KERN_INFO "\tExperimental four-level hierarchy is enabled.\n");
+#endif
+}
+
#ifdef CONFIG_TREE_PREEMPT_RCU
struct rcu_state rcu_preempt_state = RCU_STATE_INITIALIZER(rcu_preempt_state);
*/
static void __init rcu_bootup_announce(void)
{
- printk(KERN_INFO
- "Experimental preemptable hierarchical RCU implementation.\n");
+ printk(KERN_INFO "Preemptable hierarchical RCU implementation.\n");
+ rcu_bootup_announce_oddness();
}
/*
* that this just means that the task currently running on the CPU is
* not in a quiescent state. There might be any number of tasks blocked
* while in an RCU read-side critical section.
+ *
+ * Unlike the other rcu_*_qs() functions, callers to this function
+ * must disable irqs in order to protect the assignment to
+ * ->rcu_read_unlock_special.
*/
static void rcu_preempt_qs(int cpu)
{
struct rcu_data *rdp = &per_cpu(rcu_preempt_data, cpu);
+
rdp->passed_quiesc_completed = rdp->gpnum - 1;
barrier();
rdp->passed_quiesc = 1;
+ current->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_NEED_QS;
}
/*
* grace period, then the fact that the task has been enqueued
* means that we continue to block the current grace period.
*/
- rcu_preempt_qs(cpu);
local_irq_save(flags);
- t->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_NEED_QS;
+ rcu_preempt_qs(cpu);
local_irq_restore(flags);
}
*/
special = t->rcu_read_unlock_special;
if (special & RCU_READ_UNLOCK_NEED_QS) {
- t->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_NEED_QS;
rcu_preempt_qs(smp_processor_id());
}
#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
+#ifdef CONFIG_RCU_CPU_STALL_VERBOSE
+
+/*
+ * Dump detailed information for all tasks blocking the current RCU
+ * grace period on the specified rcu_node structure.
+ */
+static void rcu_print_detail_task_stall_rnp(struct rcu_node *rnp)
+{
+ unsigned long flags;
+ struct list_head *lp;
+ int phase;
+ struct task_struct *t;
+
+ if (rcu_preempted_readers(rnp)) {
+ raw_spin_lock_irqsave(&rnp->lock, flags);
+ phase = rnp->gpnum & 0x1;
+ lp = &rnp->blocked_tasks[phase];
+ list_for_each_entry(t, lp, rcu_node_entry)
+ sched_show_task(t);
+ raw_spin_unlock_irqrestore(&rnp->lock, flags);
+ }
+}
+
+/*
+ * Dump detailed information for all tasks blocking the current RCU
+ * grace period.
+ */
+static void rcu_print_detail_task_stall(struct rcu_state *rsp)
+{
+ struct rcu_node *rnp = rcu_get_root(rsp);
+
+ rcu_print_detail_task_stall_rnp(rnp);
+ rcu_for_each_leaf_node(rsp, rnp)
+ rcu_print_detail_task_stall_rnp(rnp);
+}
+
+#else /* #ifdef CONFIG_RCU_CPU_STALL_VERBOSE */
+
+static void rcu_print_detail_task_stall(struct rcu_state *rsp)
+{
+}
+
+#endif /* #else #ifdef CONFIG_RCU_CPU_STALL_VERBOSE */
+
/*
* Scan the current list of tasks blocked within RCU read-side critical
* sections, printing out the tid of each.
struct task_struct *t = current;
if (t->rcu_read_lock_nesting == 0) {
- t->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_NEED_QS;
rcu_preempt_qs(cpu);
return;
}
if (!rcu_scheduler_active)
return;
+ init_rcu_head_on_stack(&rcu.head);
init_completion(&rcu.completion);
/* Will wake me after RCU finished. */
call_rcu(&rcu.head, wakeme_after_rcu);
/* Wait for it. */
wait_for_completion(&rcu.completion);
+ destroy_rcu_head_on_stack(&rcu.head);
}
EXPORT_SYMBOL_GPL(synchronize_rcu);
static void __init rcu_bootup_announce(void)
{
printk(KERN_INFO "Hierarchical RCU implementation.\n");
+ rcu_bootup_announce_oddness();
}
/*
* Because preemptable RCU does not exist, we never have to check for
* tasks blocked within RCU read-side critical sections.
*/
+static void rcu_print_detail_task_stall(struct rcu_state *rsp)
+{
+}
+
+/*
+ * Because preemptable RCU does not exist, we never have to check for
+ * tasks blocked within RCU read-side critical sections.
+ */
static void rcu_print_task_stall(struct rcu_node *rnp)
{
}
return rcu_needs_cpu_quick_check(cpu);
}
+/*
+ * Check to see if we need to continue a callback-flush operations to
+ * allow the last CPU to enter dyntick-idle mode. But fast dyntick-idle
+ * entry is not configured, so we never do need to.
+ */
+static void rcu_needs_cpu_flush(void)
+{
+}
+
#else /* #if !defined(CONFIG_RCU_FAST_NO_HZ) */
#define RCU_NEEDS_CPU_FLUSHES 5
+static DEFINE_PER_CPU(int, rcu_dyntick_drain);
+static DEFINE_PER_CPU(unsigned long, rcu_dyntick_holdoff);
/*
* Check to see if any future RCU-related work will need to be done
* only if all other CPUs are already in dynticks-idle mode. This will
* allow the CPU cores to be powered down immediately, as opposed to after
* waiting many milliseconds for grace periods to elapse.
+ *
+ * Because it is not legal to invoke rcu_process_callbacks() with irqs
+ * disabled, we do one pass of force_quiescent_state(), then do a
+ * raise_softirq() to cause rcu_process_callbacks() to be invoked later.
+ * The per-cpu rcu_dyntick_drain variable controls the sequencing.
*/
int rcu_needs_cpu(int cpu)
{
- int c = 1;
- int i;
+ int c = 0;
+ int snap;
+ int snap_nmi;
int thatcpu;
+ /* Check for being in the holdoff period. */
+ if (per_cpu(rcu_dyntick_holdoff, cpu) == jiffies)
+ return rcu_needs_cpu_quick_check(cpu);
+
/* Don't bother unless we are the last non-dyntick-idle CPU. */
- for_each_cpu_not(thatcpu, nohz_cpu_mask)
- if (thatcpu != cpu)
+ for_each_online_cpu(thatcpu) {
+ if (thatcpu == cpu)
+ continue;
+ snap = per_cpu(rcu_dynticks, thatcpu).dynticks;
+ snap_nmi = per_cpu(rcu_dynticks, thatcpu).dynticks_nmi;
+ smp_mb(); /* Order sampling of snap with end of grace period. */
+ if (((snap & 0x1) != 0) || ((snap_nmi & 0x1) != 0)) {
+ per_cpu(rcu_dyntick_drain, cpu) = 0;
+ per_cpu(rcu_dyntick_holdoff, cpu) = jiffies - 1;
return rcu_needs_cpu_quick_check(cpu);
-
- /* Try to push remaining RCU-sched and RCU-bh callbacks through. */
- for (i = 0; i < RCU_NEEDS_CPU_FLUSHES && c; i++) {
- c = 0;
- if (per_cpu(rcu_sched_data, cpu).nxtlist) {
- rcu_sched_qs(cpu);
- force_quiescent_state(&rcu_sched_state, 0);
- __rcu_process_callbacks(&rcu_sched_state,
- &per_cpu(rcu_sched_data, cpu));
- c = !!per_cpu(rcu_sched_data, cpu).nxtlist;
- }
- if (per_cpu(rcu_bh_data, cpu).nxtlist) {
- rcu_bh_qs(cpu);
- force_quiescent_state(&rcu_bh_state, 0);
- __rcu_process_callbacks(&rcu_bh_state,
- &per_cpu(rcu_bh_data, cpu));
- c = !!per_cpu(rcu_bh_data, cpu).nxtlist;
}
}
+ /* Check and update the rcu_dyntick_drain sequencing. */
+ if (per_cpu(rcu_dyntick_drain, cpu) <= 0) {
+ /* First time through, initialize the counter. */
+ per_cpu(rcu_dyntick_drain, cpu) = RCU_NEEDS_CPU_FLUSHES;
+ } else if (--per_cpu(rcu_dyntick_drain, cpu) <= 0) {
+ /* We have hit the limit, so time to give up. */
+ per_cpu(rcu_dyntick_holdoff, cpu) = jiffies;
+ return rcu_needs_cpu_quick_check(cpu);
+ }
+
+ /* Do one step pushing remaining RCU callbacks through. */
+ if (per_cpu(rcu_sched_data, cpu).nxtlist) {
+ rcu_sched_qs(cpu);
+ force_quiescent_state(&rcu_sched_state, 0);
+ c = c || per_cpu(rcu_sched_data, cpu).nxtlist;
+ }
+ if (per_cpu(rcu_bh_data, cpu).nxtlist) {
+ rcu_bh_qs(cpu);
+ force_quiescent_state(&rcu_bh_state, 0);
+ c = c || per_cpu(rcu_bh_data, cpu).nxtlist;
+ }
+
/* If RCU callbacks are still pending, RCU still needs this CPU. */
+ if (c)
+ raise_softirq(RCU_SOFTIRQ);
return c;
}
+/*
+ * Check to see if we need to continue a callback-flush operations to
+ * allow the last CPU to enter dyntick-idle mode.
+ */
+static void rcu_needs_cpu_flush(void)
+{
+ int cpu = smp_processor_id();
+ unsigned long flags;
+
+ if (per_cpu(rcu_dyntick_drain, cpu) <= 0)
+ return;
+ local_irq_save(flags);
+ (void)rcu_needs_cpu(cpu);
+ local_irq_restore(flags);
+}
+
#endif /* #else #if !defined(CONFIG_RCU_FAST_NO_HZ) */