*
*/
-#include <linux/module.h>
-#include <linux/suspend.h>
#include <linux/kobject.h>
#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/cpu.h>
#include <linux/resume-trace.h>
-#include <linux/freezer.h>
-#include <linux/vmstat.h>
-#include <linux/syscalls.h>
+#include <linux/workqueue.h>
#include "power.h"
#ifdef CONFIG_PM_DEBUG
int pm_test_level = TEST_NONE;
-static int suspend_test(int level)
-{
- if (pm_test_level == level) {
- printk(KERN_INFO "suspend debug: Waiting for 5 seconds.\n");
- mdelay(5000);
- return 1;
- }
- return 0;
-}
-
static const char * const pm_tests[__TEST_AFTER_LAST] = {
[TEST_NONE] = "none",
[TEST_CORE] = "core",
}
power_attr(pm_test);
-#else /* !CONFIG_PM_DEBUG */
-static inline int suspend_test(int level) { return 0; }
-#endif /* !CONFIG_PM_DEBUG */
+#endif /* CONFIG_PM_DEBUG */
#endif /* CONFIG_PM_SLEEP */
-#ifdef CONFIG_SUSPEND
-
-/* This is just an arbitrary number */
-#define FREE_PAGE_NUMBER (100)
-
-static struct platform_suspend_ops *suspend_ops;
-
-/**
- * suspend_set_ops - Set the global suspend method table.
- * @ops: Pointer to ops structure.
- */
-
-void suspend_set_ops(struct platform_suspend_ops *ops)
-{
- mutex_lock(&pm_mutex);
- suspend_ops = ops;
- mutex_unlock(&pm_mutex);
-}
-
-/**
- * suspend_valid_only_mem - generic memory-only valid callback
- *
- * Platform drivers that implement mem suspend only and only need
- * to check for that in their .valid callback can use this instead
- * of rolling their own .valid callback.
- */
-int suspend_valid_only_mem(suspend_state_t state)
-{
- return state == PM_SUSPEND_MEM;
-}
-
-/**
- * suspend_prepare - Do prep work before entering low-power state.
- *
- * This is common code that is called for each state that we're entering.
- * Run suspend notifiers, allocate a console and stop all processes.
- */
-static int suspend_prepare(void)
-{
- int error;
- unsigned int free_pages;
-
- if (!suspend_ops || !suspend_ops->enter)
- return -EPERM;
-
- error = pm_notifier_call_chain(PM_SUSPEND_PREPARE);
- if (error)
- goto Finish;
-
- pm_prepare_console();
-
- if (freeze_processes()) {
- error = -EAGAIN;
- goto Thaw;
- }
-
- free_pages = global_page_state(NR_FREE_PAGES);
- if (free_pages < FREE_PAGE_NUMBER) {
- pr_debug("PM: free some memory\n");
- shrink_all_memory(FREE_PAGE_NUMBER - free_pages);
- if (nr_free_pages() < FREE_PAGE_NUMBER) {
- error = -ENOMEM;
- printk(KERN_ERR "PM: No enough memory\n");
- }
- }
- if (!error)
- return 0;
-
- Thaw:
- thaw_processes();
- pm_restore_console();
- Finish:
- pm_notifier_call_chain(PM_POST_SUSPEND);
- return error;
-}
-
-/* default implementation */
-void __attribute__ ((weak)) arch_suspend_disable_irqs(void)
-{
- local_irq_disable();
-}
-
-/* default implementation */
-void __attribute__ ((weak)) arch_suspend_enable_irqs(void)
-{
- local_irq_enable();
-}
-
-/**
- * suspend_enter - enter the desired system sleep state.
- * @state: state to enter
- *
- * This function should be called after devices have been suspended.
- */
-static int suspend_enter(suspend_state_t state)
-{
- int error = 0;
-
- arch_suspend_disable_irqs();
- BUG_ON(!irqs_disabled());
-
- if ((error = device_power_down(PMSG_SUSPEND))) {
- printk(KERN_ERR "PM: Some devices failed to power down\n");
- goto Done;
- }
-
- if (!suspend_test(TEST_CORE))
- error = suspend_ops->enter(state);
-
- device_power_up();
- Done:
- arch_suspend_enable_irqs();
- BUG_ON(irqs_disabled());
- return error;
-}
-
-/**
- * suspend_devices_and_enter - suspend devices and enter the desired system
- * sleep state.
- * @state: state to enter
- */
-int suspend_devices_and_enter(suspend_state_t state)
-{
- int error;
-
- if (!suspend_ops)
- return -ENOSYS;
-
- if (suspend_ops->begin) {
- error = suspend_ops->begin(state);
- if (error)
- goto Close;
- }
- suspend_console();
- error = device_suspend(PMSG_SUSPEND);
- if (error) {
- printk(KERN_ERR "PM: Some devices failed to suspend\n");
- goto Resume_console;
- }
-
- if (suspend_test(TEST_DEVICES))
- goto Resume_devices;
-
- if (suspend_ops->prepare) {
- error = suspend_ops->prepare();
- if (error)
- goto Resume_devices;
- }
-
- if (suspend_test(TEST_PLATFORM))
- goto Finish;
-
- error = disable_nonboot_cpus();
- if (!error && !suspend_test(TEST_CPUS))
- suspend_enter(state);
-
- enable_nonboot_cpus();
- Finish:
- if (suspend_ops->finish)
- suspend_ops->finish();
- Resume_devices:
- device_resume();
- Resume_console:
- resume_console();
- Close:
- if (suspend_ops->end)
- suspend_ops->end();
- return error;
-}
-
-/**
- * suspend_finish - Do final work before exiting suspend sequence.
- *
- * Call platform code to clean up, restart processes, and free the
- * console that we've allocated. This is not called for suspend-to-disk.
- */
-static void suspend_finish(void)
-{
- thaw_processes();
- pm_restore_console();
- pm_notifier_call_chain(PM_POST_SUSPEND);
-}
-
-
-
-
-static const char * const pm_states[PM_SUSPEND_MAX] = {
- [PM_SUSPEND_STANDBY] = "standby",
- [PM_SUSPEND_MEM] = "mem",
-};
-
-static inline int valid_state(suspend_state_t state)
-{
- /* All states need lowlevel support and need to be valid
- * to the lowlevel implementation, no valid callback
- * implies that none are valid. */
- if (!suspend_ops || !suspend_ops->valid || !suspend_ops->valid(state))
- return 0;
- return 1;
-}
-
-
-/**
- * enter_state - Do common work of entering low-power state.
- * @state: pm_state structure for state we're entering.
- *
- * Make sure we're the only ones trying to enter a sleep state. Fail
- * if someone has beat us to it, since we don't want anything weird to
- * happen when we wake up.
- * Then, do the setup for suspend, enter the state, and cleaup (after
- * we've woken up).
- */
-static int enter_state(suspend_state_t state)
-{
- int error;
-
- if (!valid_state(state))
- return -ENODEV;
-
- if (!mutex_trylock(&pm_mutex))
- return -EBUSY;
-
- printk(KERN_INFO "PM: Syncing filesystems ... ");
- sys_sync();
- printk("done.\n");
-
- pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
- error = suspend_prepare();
- if (error)
- goto Unlock;
-
- if (suspend_test(TEST_FREEZER))
- goto Finish;
-
- pr_debug("PM: Entering %s sleep\n", pm_states[state]);
- error = suspend_devices_and_enter(state);
-
- Finish:
- pr_debug("PM: Finishing wakeup.\n");
- suspend_finish();
- Unlock:
- mutex_unlock(&pm_mutex);
- return error;
-}
-
-
-/**
- * pm_suspend - Externally visible function for suspending system.
- * @state: Enumerated value of state to enter.
- *
- * Determine whether or not value is within range, get state
- * structure, and enter (above).
- */
-
-int pm_suspend(suspend_state_t state)
-{
- if (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX)
- return enter_state(state);
- return -EINVAL;
-}
-
-EXPORT_SYMBOL(pm_suspend);
-
-#endif /* CONFIG_SUSPEND */
-
struct kobject *power_kobj;
/**
* store() accepts one of those strings, translates it into the
* proper enumerated value, and initiates a suspend transition.
*/
-
static ssize_t state_show(struct kobject *kobj, struct kobj_attribute *attr,
char *buf)
{
.attrs = g,
};
+#ifdef CONFIG_PM_RUNTIME
+struct workqueue_struct *pm_wq;
+EXPORT_SYMBOL_GPL(pm_wq);
+
+static int __init pm_start_workqueue(void)
+{
+ pm_wq = create_freezeable_workqueue("pm");
+
+ return pm_wq ? 0 : -ENOMEM;
+}
+#else
+static inline int pm_start_workqueue(void) { return 0; }
+#endif
static int __init pm_init(void)
{
+ int error = pm_start_workqueue();
+ if (error)
+ return error;
power_kobj = kobject_create_and_add("power", NULL);
if (!power_kobj)
return -ENOMEM;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff