#include <linux/unistd.h>
#include <linux/kmod.h>
#include <linux/slab.h>
-#include <linux/mnt_namespace.h>
#include <linux/completion.h>
#include <linux/file.h>
+#include <linux/fdtable.h>
#include <linux/workqueue.h>
#include <linux/security.h>
#include <linux/mount.h>
#include <linux/suspend.h>
#include <asm/uaccess.h>
+#include <trace/events/module.h>
+
extern int max_threads;
static struct workqueue_struct *khelper_wq;
-#ifdef CONFIG_KMOD
+#ifdef CONFIG_MODULES
/*
modprobe_path is set via /proc/sys.
char modprobe_path[KMOD_PATH_LEN] = "/sbin/modprobe";
/**
- * request_module - try to load a kernel module
- * @fmt: printf style format string for the name of the module
- * @varargs: arguements as specified in the format string
+ * __request_module - try to load a kernel module
+ * @wait: wait (or not) for the operation to complete
+ * @fmt: printf style format string for the name of the module
+ * @...: arguments as specified in the format string
*
* Load a module using the user mode module loader. The function returns
* zero on success or a negative errno code on failure. Note that a
* If module auto-loading support is disabled then this function
* becomes a no-operation.
*/
-int request_module(const char *fmt, ...)
+int __request_module(bool wait, const char *fmt, ...)
{
va_list args;
char module_name[MODULE_NAME_LEN];
if (ret >= MODULE_NAME_LEN)
return -ENAMETOOLONG;
+ ret = security_kernel_module_request(module_name);
+ if (ret)
+ return ret;
+
/* If modprobe needs a service that is in a module, we get a recursive
* loop. Limit the number of running kmod threads to max_threads/2 or
* MAX_KMOD_CONCURRENT, whichever is the smaller. A cleaner method
return -ENOMEM;
}
- ret = call_usermodehelper(modprobe_path, argv, envp, 1);
+ trace_module_request(module_name, wait, _RET_IP_);
+
+ ret = call_usermodehelper_fns(modprobe_path, argv, envp,
+ wait ? UMH_WAIT_PROC : UMH_WAIT_EXEC,
+ NULL, NULL, NULL);
+
atomic_dec(&kmod_concurrent);
return ret;
}
-EXPORT_SYMBOL(request_module);
-#endif /* CONFIG_KMOD */
-
-struct subprocess_info {
- struct work_struct work;
- struct completion *complete;
- char *path;
- char **argv;
- char **envp;
- struct key *ring;
- enum umh_wait wait;
- int retval;
- struct file *stdin;
- void (*cleanup)(char **argv, char **envp);
-};
+EXPORT_SYMBOL(__request_module);
+#endif /* CONFIG_MODULES */
/*
* This is the task which runs the usermode application
static int ____call_usermodehelper(void *data)
{
struct subprocess_info *sub_info = data;
- struct key *new_session, *old_session;
int retval;
- /* Unblock all signals and set the session keyring. */
- new_session = key_get(sub_info->ring);
spin_lock_irq(¤t->sighand->siglock);
- old_session = __install_session_keyring(current, new_session);
flush_signal_handlers(current, 1);
- sigemptyset(¤t->blocked);
- recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- key_put(old_session);
-
- /* Install input pipe when needed */
- if (sub_info->stdin) {
- struct files_struct *f = current->files;
- struct fdtable *fdt;
- /* no races because files should be private here */
- sys_close(0);
- fd_install(0, sub_info->stdin);
- spin_lock(&f->file_lock);
- fdt = files_fdtable(f);
- FD_SET(0, fdt->open_fds);
- FD_CLR(0, fdt->close_on_exec);
- spin_unlock(&f->file_lock);
-
- /* and disallow core files too */
- current->signal->rlim[RLIMIT_CORE] = (struct rlimit){0, 0};
- }
-
/* We can run anywhere, unlike our parent keventd(). */
- set_cpus_allowed(current, CPU_MASK_ALL);
+ set_cpus_allowed_ptr(current, cpu_all_mask);
/*
* Our parent is keventd, which runs with elevated scheduling priority.
*/
set_user_nice(current, 0);
- retval = -EPERM;
- if (current->fs->root)
- retval = kernel_execve(sub_info->path,
- sub_info->argv, sub_info->envp);
+ if (sub_info->init) {
+ retval = sub_info->init(sub_info);
+ if (retval)
+ goto fail;
+ }
+
+ retval = kernel_execve(sub_info->path, sub_info->argv, sub_info->envp);
/* Exec failed? */
+fail:
sub_info->retval = retval;
do_exit(0);
}
void call_usermodehelper_freeinfo(struct subprocess_info *info)
{
if (info->cleanup)
- (*info->cleanup)(info->argv, info->envp);
+ (*info->cleanup)(info);
kfree(info);
}
EXPORT_SYMBOL(call_usermodehelper_freeinfo);
struct subprocess_info *sub_info = data;
pid_t pid;
- /* Install a handler: if SIGCLD isn't handled sys_wait4 won't
- * populate the status, but will return -ECHILD. */
- allow_signal(SIGCHLD);
+ /* If SIGCLD is ignored sys_wait4 won't populate the status. */
+ spin_lock_irq(¤t->sighand->siglock);
+ current->sighand->action[SIGCHLD-1].sa.sa_handler = SIG_DFL;
+ spin_unlock_irq(¤t->sighand->siglock);
pid = kernel_thread(____call_usermodehelper, sub_info, SIGCHLD);
if (pid < 0) {
sub_info->retval = pid;
} else {
- int ret;
-
+ int ret = -ECHILD;
/*
* Normally it is bogus to call wait4() from in-kernel because
* wait4() wants to write the exit code to a userspace address.
sub_info->retval = ret;
}
- if (sub_info->wait == UMH_NO_WAIT)
- call_usermodehelper_freeinfo(sub_info);
- else
- complete(sub_info->complete);
+ complete(sub_info->complete);
return 0;
}
{
struct subprocess_info *sub_info =
container_of(work, struct subprocess_info, work);
- pid_t pid;
enum umh_wait wait = sub_info->wait;
+ pid_t pid;
/* CLONE_VFORK: wait until the usermode helper has execve'd
* successfully We need the data structures to stay around
* until that is done. */
- if (wait == UMH_WAIT_PROC || wait == UMH_NO_WAIT)
+ if (wait == UMH_WAIT_PROC)
pid = kernel_thread(wait_for_helper, sub_info,
CLONE_FS | CLONE_FILES | SIGCHLD);
else
switch (wait) {
case UMH_NO_WAIT:
+ call_usermodehelper_freeinfo(sub_info);
break;
case UMH_WAIT_PROC:
if (pid > 0)
break;
- sub_info->retval = pid;
/* FALLTHROUGH */
-
case UMH_WAIT_EXEC:
+ if (pid < 0)
+ sub_info->retval = pid;
complete(sub_info->complete);
}
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
/*
* If set, call_usermodehelper_exec() will exit immediately returning -EBUSY
* (used for preventing user land processes from being created after the user
*/
#define RUNNING_HELPERS_TIMEOUT (5 * HZ)
-static int usermodehelper_pm_callback(struct notifier_block *nfb,
- unsigned long action,
- void *ignored)
+/**
+ * usermodehelper_disable - prevent new helpers from being started
+ */
+int usermodehelper_disable(void)
{
long retval;
- switch (action) {
- case PM_HIBERNATION_PREPARE:
- case PM_SUSPEND_PREPARE:
- usermodehelper_disabled = 1;
- smp_mb();
- /*
- * From now on call_usermodehelper_exec() won't start any new
- * helpers, so it is sufficient if running_helpers turns out to
- * be zero at one point (it may be increased later, but that
- * doesn't matter).
- */
- retval = wait_event_timeout(running_helpers_waitq,
+ usermodehelper_disabled = 1;
+ smp_mb();
+ /*
+ * From now on call_usermodehelper_exec() won't start any new
+ * helpers, so it is sufficient if running_helpers turns out to
+ * be zero at one point (it may be increased later, but that
+ * doesn't matter).
+ */
+ retval = wait_event_timeout(running_helpers_waitq,
atomic_read(&running_helpers) == 0,
RUNNING_HELPERS_TIMEOUT);
- if (retval) {
- return NOTIFY_OK;
- } else {
- usermodehelper_disabled = 0;
- return NOTIFY_BAD;
- }
- case PM_POST_HIBERNATION:
- case PM_POST_SUSPEND:
- usermodehelper_disabled = 0;
- return NOTIFY_OK;
- }
+ if (retval)
+ return 0;
- return NOTIFY_DONE;
+ usermodehelper_disabled = 0;
+ return -EAGAIN;
+}
+
+/**
+ * usermodehelper_enable - allow new helpers to be started again
+ */
+void usermodehelper_enable(void)
+{
+ usermodehelper_disabled = 0;
}
static void helper_lock(void)
if (atomic_dec_and_test(&running_helpers))
wake_up(&running_helpers_waitq);
}
-
-static void register_pm_notifier_callback(void)
-{
- pm_notifier(usermodehelper_pm_callback, 0);
-}
-#else /* CONFIG_PM */
+#else /* CONFIG_PM_SLEEP */
#define usermodehelper_disabled 0
static inline void helper_lock(void) {}
static inline void helper_unlock(void) {}
-static inline void register_pm_notifier_callback(void) {}
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM_SLEEP */
/**
* call_usermodehelper_setup - prepare to call a usermode helper
- * @path - path to usermode executable
- * @argv - arg vector for process
- * @envp - environment for process
+ * @path: path to usermode executable
+ * @argv: arg vector for process
+ * @envp: environment for process
+ * @gfp_mask: gfp mask for memory allocation
*
- * Returns either NULL on allocation failure, or a subprocess_info
+ * Returns either %NULL on allocation failure, or a subprocess_info
* structure. This should be passed to call_usermodehelper_exec to
* exec the process and free the structure.
*/
-struct subprocess_info *call_usermodehelper_setup(char *path,
- char **argv, char **envp)
+struct subprocess_info *call_usermodehelper_setup(char *path, char **argv,
+ char **envp, gfp_t gfp_mask)
{
struct subprocess_info *sub_info;
- sub_info = kzalloc(sizeof(struct subprocess_info), GFP_ATOMIC);
+ sub_info = kzalloc(sizeof(struct subprocess_info), gfp_mask);
if (!sub_info)
goto out;
sub_info->path = path;
sub_info->argv = argv;
sub_info->envp = envp;
-
out:
return sub_info;
}
EXPORT_SYMBOL(call_usermodehelper_setup);
/**
- * call_usermodehelper_setkeys - set the session keys for usermode helper
- * @info: a subprocess_info returned by call_usermodehelper_setup
- * @session_keyring: the session keyring for the process
- */
-void call_usermodehelper_setkeys(struct subprocess_info *info,
- struct key *session_keyring)
-{
- info->ring = session_keyring;
-}
-EXPORT_SYMBOL(call_usermodehelper_setkeys);
-
-/**
- * call_usermodehelper_setcleanup - set a cleanup function
+ * call_usermodehelper_setfns - set a cleanup/init function
* @info: a subprocess_info returned by call_usermodehelper_setup
* @cleanup: a cleanup function
+ * @init: an init function
+ * @data: arbitrary context sensitive data
+ *
+ * The init function is used to customize the helper process prior to
+ * exec. A non-zero return code causes the process to error out, exit,
+ * and return the failure to the calling process
*
- * The cleanup function is just befor ethe subprocess_info is about to
+ * The cleanup function is just before ethe subprocess_info is about to
* be freed. This can be used for freeing the argv and envp. The
* Function must be runnable in either a process context or the
* context in which call_usermodehelper_exec is called.
*/
-void call_usermodehelper_setcleanup(struct subprocess_info *info,
- void (*cleanup)(char **argv, char **envp))
+void call_usermodehelper_setfns(struct subprocess_info *info,
+ int (*init)(struct subprocess_info *info),
+ void (*cleanup)(struct subprocess_info *info),
+ void *data)
{
info->cleanup = cleanup;
+ info->init = init;
+ info->data = data;
}
-EXPORT_SYMBOL(call_usermodehelper_setcleanup);
-
-/**
- * call_usermodehelper_stdinpipe - set up a pipe to be used for stdin
- * @sub_info: a subprocess_info returned by call_usermodehelper_setup
- * @filp: set to the write-end of a pipe
- *
- * This constructs a pipe, and sets the read end to be the stdin of the
- * subprocess, and returns the write-end in *@filp.
- */
-int call_usermodehelper_stdinpipe(struct subprocess_info *sub_info,
- struct file **filp)
-{
- struct file *f;
-
- f = create_write_pipe();
- if (IS_ERR(f))
- return PTR_ERR(f);
- *filp = f;
-
- f = create_read_pipe(f);
- if (IS_ERR(f)) {
- free_write_pipe(*filp);
- return PTR_ERR(f);
- }
- sub_info->stdin = f;
-
- return 0;
-}
-EXPORT_SYMBOL(call_usermodehelper_stdinpipe);
+EXPORT_SYMBOL(call_usermodehelper_setfns);
/**
* call_usermodehelper_exec - start a usermode application
enum umh_wait wait)
{
DECLARE_COMPLETION_ONSTACK(done);
- int retval;
+ int retval = 0;
helper_lock();
- if (sub_info->path[0] == '\0') {
- retval = 0;
+ if (sub_info->path[0] == '\0')
goto out;
- }
if (!khelper_wq || usermodehelper_disabled) {
retval = -EBUSY;
sub_info->wait = wait;
queue_work(khelper_wq, &sub_info->work);
- if (wait == UMH_NO_WAIT) /* task has freed sub_info */
- return 0;
+ if (wait == UMH_NO_WAIT) /* task has freed sub_info */
+ goto unlock;
wait_for_completion(&done);
retval = sub_info->retval;
- out:
+out:
call_usermodehelper_freeinfo(sub_info);
+unlock:
helper_unlock();
return retval;
}
EXPORT_SYMBOL(call_usermodehelper_exec);
-/**
- * call_usermodehelper_pipe - call a usermode helper process with a pipe stdin
- * @path: path to usermode executable
- * @argv: arg vector for process
- * @envp: environment for process
- * @filp: set to the write-end of a pipe
- *
- * This is a simple wrapper which executes a usermode-helper function
- * with a pipe as stdin. It is implemented entirely in terms of
- * lower-level call_usermodehelper_* functions.
- */
-int call_usermodehelper_pipe(char *path, char **argv, char **envp,
- struct file **filp)
-{
- struct subprocess_info *sub_info;
- int ret;
-
- sub_info = call_usermodehelper_setup(path, argv, envp);
- if (sub_info == NULL)
- return -ENOMEM;
-
- ret = call_usermodehelper_stdinpipe(sub_info, filp);
- if (ret < 0)
- goto out;
-
- return call_usermodehelper_exec(sub_info, 1);
-
- out:
- call_usermodehelper_freeinfo(sub_info);
- return ret;
-}
-EXPORT_SYMBOL(call_usermodehelper_pipe);
-
void __init usermodehelper_init(void)
{
khelper_wq = create_singlethread_workqueue("khelper");
BUG_ON(!khelper_wq);
- register_pm_notifier_callback();
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff