default "$ARCH_DEFCONFIG"
default "arch/$ARCH/defconfig"
+config CONSTRUCTORS
+ bool
+ depends on !UML
+ default y
+
menu "General setup"
config EXPERIMENTAL
which is done within the script "scripts/setlocalversion".)
+config HAVE_KERNEL_GZIP
+ bool
+
+config HAVE_KERNEL_BZIP2
+ bool
+
+config HAVE_KERNEL_LZMA
+ bool
+
+choice
+ prompt "Kernel compression mode"
+ default KERNEL_GZIP
+ depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA
+ help
+ The linux kernel is a kind of self-extracting executable.
+ Several compression algorithms are available, which differ
+ in efficiency, compression and decompression speed.
+ Compression speed is only relevant when building a kernel.
+ Decompression speed is relevant at each boot.
+
+ If you have any problems with bzip2 or lzma compressed
+ kernels, mail me (Alain Knaff) <alain@knaff.lu>. (An older
+ version of this functionality (bzip2 only), for 2.4, was
+ supplied by Christian Ludwig)
+
+ High compression options are mostly useful for users, who
+ are low on disk space (embedded systems), but for whom ram
+ size matters less.
+
+ If in doubt, select 'gzip'
+
+config KERNEL_GZIP
+ bool "Gzip"
+ depends on HAVE_KERNEL_GZIP
+ help
+ The old and tried gzip compression. Its compression ratio is
+ the poorest among the 3 choices; however its speed (both
+ compression and decompression) is the fastest.
+
+config KERNEL_BZIP2
+ bool "Bzip2"
+ depends on HAVE_KERNEL_BZIP2
+ help
+ Its compression ratio and speed is intermediate.
+ Decompression speed is slowest among the three. The kernel
+ size is about 10% smaller with bzip2, in comparison to gzip.
+ Bzip2 uses a large amount of memory. For modern kernels you
+ will need at least 8MB RAM or more for booting.
+
+config KERNEL_LZMA
+ bool "LZMA"
+ depends on HAVE_KERNEL_LZMA
+ help
+ The most recent compression algorithm.
+ Its ratio is best, decompression speed is between the other
+ two. Compression is slowest. The kernel size is about 33%
+ smaller with LZMA in comparison to gzip.
+
+endchoice
+
config SWAP
bool "Support for paging of anonymous memory (swap)"
depends on MMU && BLOCK
If unsure, say Y.
+config POSIX_MQUEUE_SYSCTL
+ bool
+ depends on POSIX_MQUEUE
+ depends on SYSCTL
+ default y
+
config BSD_PROCESS_ACCT
bool "BSD Process Accounting"
help
config AUDIT_TREE
def_bool y
- depends on AUDITSYSCALL && INOTIFY
+ depends on AUDITSYSCALL
+ select INOTIFY
menu "RCU Subsystem"
choice
prompt "RCU Implementation"
- default CLASSIC_RCU
-
-config CLASSIC_RCU
- bool "Classic RCU"
- help
- This option selects the classic RCU implementation that is
- designed for best read-side performance on non-realtime
- systems.
-
- Select this option if you are unsure.
+ default TREE_RCU
config TREE_RCU
bool "Tree-based hierarchical RCU"
help
This option selects the RCU implementation that is
designed for very large SMP system with hundreds or
- thousands of CPUs.
+ thousands of CPUs. It also scales down nicely to
+ smaller systems.
config PREEMPT_RCU
bool "Preemptible RCU"
config CPUSETS
bool "Cpuset support"
- depends on SMP && CGROUPS
+ depends on CGROUPS
help
This option will let you create and manage CPUSETs which
allow dynamically partitioning a system into sets of CPUs and
select MM_OWNER
help
Provides a memory resource controller that manages both anonymous
- memory and page cache. (See Documentation/controllers/memory.txt)
+ memory and page cache. (See Documentation/cgroups/memory.txt)
Note that setting this option increases fixed memory overhead
associated with each page of memory in the system. By this,
is disabled by boot option, this will be automatically disabled and
there will be no overhead from this. Even when you set this config=y,
if boot option "noswapaccount" is set, swap will not be accounted.
+ Now, memory usage of swap_cgroup is 2 bytes per entry. If swap page
+ size is 4096bytes, 512k per 1Gbytes of swap.
endif # CGROUPS
bool
config SYSFS_DEPRECATED_V2
- bool "Create deprecated sysfs layout for older userspace tools"
+ bool "remove sysfs features which may confuse old userspace tools"
depends on SYSFS
- default y
+ default n
select SYSFS_DEPRECATED
help
This option switches the layout of sysfs to the deprecated
- version.
+ version. Do not use it on recent distributions.
The current sysfs layout features a unified device tree at
/sys/devices/, which is able to express a hierarchy between
config IPC_NS
bool "IPC namespace"
- depends on NAMESPACES && SYSVIPC
+ depends on NAMESPACES && (SYSVIPC || POSIX_MQUEUE)
help
In this namespace tasks work with IPC ids which correspond to
- different IPC objects in different namespaces
+ different IPC objects in different namespaces.
config USER_NS
bool "User namespace (EXPERIMENTAL)"
depends on NAMESPACES && EXPERIMENTAL
help
Support process id namespaces. This allows having multiple
- process with the same pid as long as they are in different
+ processes with the same pid as long as they are in different
pid namespaces. This is a building block of containers.
Unless you want to work with an experimental feature
config SYSCTL
bool
+config ANON_INODES
+ bool
+
menuconfig EMBEDDED
bool "Configure standard kernel features (for small systems)"
help
environments which can tolerate a "non-standard" kernel.
Only use this if you really know what you are doing.
-if EMBEDDED
-
config UID16
bool "Enable 16-bit UID system calls" if EMBEDDED
depends on ARM || BLACKFIN || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && COMPAT) || UML || (X86_64 && IA32_EMULATION)
support for "fast userspace mutexes". The resulting kernel may not
run glibc-based applications correctly.
-config ANON_INODES
- bool
-
config EPOLL
bool "Enable eventpoll support" if EMBEDDED
default y
by some high performance threaded applications. Disabling
this option saves about 7k.
+config HAVE_PERF_COUNTERS
+ bool
+ help
+ See tools/perf/design.txt for details.
+
+menu "Performance Counters"
+
+config PERF_COUNTERS
+ bool "Kernel Performance Counters"
+ default y if PROFILING
+ depends on HAVE_PERF_COUNTERS
+ select ANON_INODES
+ help
+ Enable kernel support for performance counter hardware.
+
+ Performance counters are special hardware registers available
+ on most modern CPUs. These registers count the number of certain
+ types of hw events: such as instructions executed, cachemisses
+ suffered, or branches mis-predicted - without slowing down the
+ kernel or applications. These registers can also trigger interrupts
+ when a threshold number of events have passed - and can thus be
+ used to profile the code that runs on that CPU.
+
+ The Linux Performance Counter subsystem provides an abstraction of
+ these hardware capabilities, available via a system call. It
+ provides per task and per CPU counters, and it provides event
+ capabilities on top of those.
+
+ Say Y if unsure.
+
+config EVENT_PROFILE
+ bool "Tracepoint profiling sources"
+ depends on PERF_COUNTERS && EVENT_TRACING
+ default y
+ help
+ Allow the use of tracepoints as software performance counters.
+
+ When this is enabled, you can create perf counters based on
+ tracepoints using PERF_TYPE_TRACEPOINT and the tracepoint ID
+ found in debugfs://tracing/events/*/*/id. (The -e/--events
+ option to the perf tool can parse and interpret symbolic
+ tracepoints, in the subsystem:tracepoint_name format.)
+
+endmenu
+
config VM_EVENT_COUNTERS
default y
bool "Enable VM event counters for /proc/vmstat" if EMBEDDED
SLUB sysfs support. /sys/slab will not exist and there will be
no support for cache validation etc.
-endif # EMBEDDED
+config STRIP_ASM_SYMS
+ bool "Strip assembler-generated symbols during link"
+ default n
+ help
+ Strip internal assembler-generated symbols during a link (symbols
+ that look like '.Lxxx') so they don't pollute the output of
+ get_wchan() and suchlike.
config COMPAT_BRK
bool "Disable heap randomization"
Randomizing heap placement makes heap exploits harder, but it
also breaks ancient binaries (including anything libc5 based).
This option changes the bootup default to heap randomization
- disabled, and can be overriden runtime by setting
+ disabled, and can be overridden at runtime by setting
/proc/sys/kernel/randomize_va_space to 2.
On non-ancient distros (post-2000 ones) N is usually a safe choice.
config MARKERS
bool "Activate markers"
- depends on TRACEPOINTS
+ select TRACEPOINTS
help
Place an empty function call at each marker site. Can be
dynamically changed for a probe function.
source "arch/Kconfig"
+config SLOW_WORK
+ default n
+ bool
+ help
+ The slow work thread pool provides a number of dynamically allocated
+ threads that can be used by the kernel to perform operations that
+ take a relatively long time.
+
+ An example of this would be CacheFiles doing a path lookup followed
+ by a series of mkdirs and a create call, all of which have to touch
+ disk.
+
+ See Documentation/slow-work.txt.
+
endmenu # General setup
config HAVE_GENERIC_DMA_COHERENT
config RT_MUTEXES
boolean
- select PLIST
config BASE_SMALL
int
cpu_possible_map, some of them chose to initialize cpu_possible_map
with all 1s, and others with all 0s. When they were centralised,
it was better to provide this option than to break all the archs
- and have several arch maintainers persuing me down dark alleys.
+ and have several arch maintainers pursuing me down dark alleys.
config STOP_MACHINE
bool
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff