#define _SCSI_SCSI_CMND_H
#include <linux/dma-mapping.h>
+#include <linux/blkdev.h>
#include <linux/list.h>
#include <linux/types.h>
#include <linux/timer.h>
#include <linux/scatterlist.h>
-struct request;
struct Scsi_Host;
struct scsi_device;
+/*
+ * MAX_COMMAND_SIZE is:
+ * The longest fixed-length SCSI CDB as per the SCSI standard.
+ * fixed-length means: commands that their size can be determined
+ * by their opcode and the CDB does not carry a length specifier, (unlike
+ * the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly
+ * true and the SCSI standard also defines extended commands and
+ * vendor specific commands that can be bigger than 16 bytes. The kernel
+ * will support these using the same infrastructure used for VARLEN CDB's.
+ * So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml
+ * supports without specifying a cmd_len by ULD's
+ */
+#define MAX_COMMAND_SIZE 16
+#if (MAX_COMMAND_SIZE > BLK_MAX_CDB)
+# error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB
+#endif
+
struct scsi_data_buffer {
struct sg_table table;
unsigned length;
int allowed;
int timeout_per_command;
- unsigned char cmd_len;
+ unsigned char prot_op;
+ unsigned char prot_type;
+
+ unsigned short cmd_len;
enum dma_data_direction sc_data_direction;
/* These elements define the operation we are about to perform */
-#define MAX_COMMAND_SIZE 16
- unsigned char cmnd[MAX_COMMAND_SIZE];
+ unsigned char *cmnd;
struct timer_list eh_timeout; /* Used to time out the command. */
/* These elements define the operation we ultimately want to perform */
struct scsi_data_buffer sdb;
+ struct scsi_data_buffer *prot_sdb;
+
unsigned underflow; /* Return error if less than
this amount is transferred */
extern int scsi_dma_map(struct scsi_cmnd *cmd);
extern void scsi_dma_unmap(struct scsi_cmnd *cmd);
+struct scsi_cmnd *scsi_allocate_command(gfp_t gfp_mask);
+void scsi_free_command(gfp_t gfp_mask, struct scsi_cmnd *cmd);
+
static inline unsigned scsi_sg_count(struct scsi_cmnd *cmd)
{
return cmd->sdb.table.nents;
#define scsi_for_each_sg(cmd, sg, nseg, __i) \
for_each_sg(scsi_sglist(cmd), sg, nseg, __i)
+static inline int scsi_bidi_cmnd(struct scsi_cmnd *cmd)
+{
+ return blk_bidi_rq(cmd->request) &&
+ (cmd->request->next_rq->special != NULL);
+}
+
+static inline struct scsi_data_buffer *scsi_in(struct scsi_cmnd *cmd)
+{
+ return scsi_bidi_cmnd(cmd) ?
+ cmd->request->next_rq->special : &cmd->sdb;
+}
+
+static inline struct scsi_data_buffer *scsi_out(struct scsi_cmnd *cmd)
+{
+ return &cmd->sdb;
+}
+
+static inline int scsi_sg_copy_from_buffer(struct scsi_cmnd *cmd,
+ void *buf, int buflen)
+{
+ return sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd),
+ buf, buflen);
+}
+
+static inline int scsi_sg_copy_to_buffer(struct scsi_cmnd *cmd,
+ void *buf, int buflen)
+{
+ return sg_copy_to_buffer(scsi_sglist(cmd), scsi_sg_count(cmd),
+ buf, buflen);
+}
+
+/*
+ * The operations below are hints that tell the controller driver how
+ * to handle I/Os with DIF or similar types of protection information.
+ */
+enum scsi_prot_operations {
+ /* Normal I/O */
+ SCSI_PROT_NORMAL = 0,
+
+ /* OS-HBA: Protected, HBA-Target: Unprotected */
+ SCSI_PROT_READ_INSERT,
+ SCSI_PROT_WRITE_STRIP,
+
+ /* OS-HBA: Unprotected, HBA-Target: Protected */
+ SCSI_PROT_READ_STRIP,
+ SCSI_PROT_WRITE_INSERT,
+
+ /* OS-HBA: Protected, HBA-Target: Protected */
+ SCSI_PROT_READ_PASS,
+ SCSI_PROT_WRITE_PASS,
+
+ /* OS-HBA: Protected, HBA-Target: Protected, checksum conversion */
+ SCSI_PROT_READ_CONVERT,
+ SCSI_PROT_WRITE_CONVERT,
+};
+
+static inline void scsi_set_prot_op(struct scsi_cmnd *scmd, unsigned char op)
+{
+ scmd->prot_op = op;
+}
+
+static inline unsigned char scsi_get_prot_op(struct scsi_cmnd *scmd)
+{
+ return scmd->prot_op;
+}
+
+/*
+ * The controller usually does not know anything about the target it
+ * is communicating with. However, when DIX is enabled the controller
+ * must be know target type so it can verify the protection
+ * information passed along with the I/O.
+ */
+enum scsi_prot_target_type {
+ SCSI_PROT_DIF_TYPE0 = 0,
+ SCSI_PROT_DIF_TYPE1,
+ SCSI_PROT_DIF_TYPE2,
+ SCSI_PROT_DIF_TYPE3,
+};
+
+static inline void scsi_set_prot_type(struct scsi_cmnd *scmd, unsigned char type)
+{
+ scmd->prot_type = type;
+}
+
+static inline unsigned char scsi_get_prot_type(struct scsi_cmnd *scmd)
+{
+ return scmd->prot_type;
+}
+
+static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd)
+{
+ return scmd->request->sector;
+}
+
+static inline unsigned scsi_prot_sg_count(struct scsi_cmnd *cmd)
+{
+ return cmd->prot_sdb ? cmd->prot_sdb->table.nents : 0;
+}
+
+static inline struct scatterlist *scsi_prot_sglist(struct scsi_cmnd *cmd)
+{
+ return cmd->prot_sdb ? cmd->prot_sdb->table.sgl : NULL;
+}
+
+static inline struct scsi_data_buffer *scsi_prot(struct scsi_cmnd *cmd)
+{
+ return cmd->prot_sdb;
+}
+
+#define scsi_for_each_prot_sg(cmd, sg, nseg, __i) \
+ for_each_sg(scsi_prot_sglist(cmd), sg, nseg, __i)
+
#endif /* _SCSI_SCSI_CMND_H */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff