#ifndef V4L2_COMMON_H_
#define V4L2_COMMON_H_
+#include <media/v4l2-dev.h>
+
/* v4l debugging and diagnostics */
+/* Debug bitmask flags to be used on V4L2 */
+#define V4L2_DEBUG_IOCTL 0x01
+#define V4L2_DEBUG_IOCTL_ARG 0x02
+
/* Common printk constucts for v4l-i2c drivers. These macros create a unique
prefix consisting of the driver name, the adapter number and the i2c
address. */
v4l_client_printk(KERN_DEBUG, client, fmt , ## arg); \
} while (0)
-/* Prints the ioctl in a human-readable format */
-extern void v4l_printk_ioctl(unsigned int cmd);
-
-/* Prints the ioctl and arg in a human-readable format */
-extern void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg);
/* Use this macro for non-I2C drivers. Pass the driver name as the first arg. */
#define v4l_print_ioctl(name, cmd) \
/* ------------------------------------------------------------------------- */
-/* Internal ioctls */
+/* Control helper functions */
-/* VIDIOC_INT_G_REGISTER and VIDIOC_INT_S_REGISTER */
-struct v4l2_register {
- u32 i2c_id; /* I2C driver ID of the I2C chip. 0 for the I2C adapter. */
- unsigned long reg;
- u32 val;
-};
+int v4l2_ctrl_check(struct v4l2_ext_control *ctrl, struct v4l2_queryctrl *qctrl,
+ const char **menu_items);
+const char **v4l2_ctrl_get_menu(u32 id);
+int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 step, s32 def);
+int v4l2_ctrl_query_fill_std(struct v4l2_queryctrl *qctrl);
+int v4l2_ctrl_query_menu(struct v4l2_querymenu *qmenu,
+ struct v4l2_queryctrl *qctrl, const char **menu_items);
+u32 v4l2_ctrl_next(const u32 * const *ctrl_classes, u32 id);
+
+/* ------------------------------------------------------------------------- */
+
+/* Register/chip ident helper function */
+
+struct i2c_client; /* forward reference */
+int v4l2_chip_match_i2c_client(struct i2c_client *c, u32 id_type, u32 chip_id);
+int v4l2_chip_ident_i2c_client(struct i2c_client *c, struct v4l2_chip_ident *chip,
+ u32 ident, u32 revision);
+int v4l2_chip_match_host(u32 id_type, u32 chip_id);
+
+/* ------------------------------------------------------------------------- */
+
+/* Helper function for I2C legacy drivers */
+
+struct i2c_driver;
+struct i2c_adapter;
+struct i2c_client;
+struct i2c_device_id;
+
+int v4l2_i2c_attach(struct i2c_adapter *adapter, int address, struct i2c_driver *driver,
+ const char *name,
+ int (*probe)(struct i2c_client *, const struct i2c_device_id *));
+
+/* ------------------------------------------------------------------------- */
+
+/* Internal ioctls */
/* VIDIOC_INT_DECODE_VBI_LINE */
struct v4l2_decode_vbi_line {
u32 type; /* VBI service type (V4L2_SLICED_*). 0 if no service found */
};
-/* VIDIOC_INT_G_CHIP_IDENT: identifies the actual chip installed on the board */
-enum v4l2_chip_ident {
- /* general idents: reserved range 0-49 */
- V4L2_IDENT_UNKNOWN = 0,
-
- /* module saa7115: reserved range 100-149 */
- V4L2_IDENT_SAA7113 = 103,
- V4L2_IDENT_SAA7114 = 104,
- V4L2_IDENT_SAA7115 = 105,
-
- /* module saa7127: reserved range 150-199 */
- V4L2_IDENT_SAA7127 = 157,
- V4L2_IDENT_SAA7129 = 159,
-
- /* module cx25840: reserved range 200-249 */
- V4L2_IDENT_CX25836 = 236,
- V4L2_IDENT_CX25837 = 237,
- V4L2_IDENT_CX25840 = 240,
- V4L2_IDENT_CX25841 = 241,
- V4L2_IDENT_CX25842 = 242,
- V4L2_IDENT_CX25843 = 243,
+struct v4l2_priv_tun_config {
+ int tuner;
+ void *priv;
};
/* audio ioctls */
#define TUNER_SET_STANDBY _IOW('d', 91, int)
/* Sets tda9887 specific stuff, like port1, port2 and qss */
-#define TDA9887_SET_CONFIG _IOW('d', 92, int)
+#define TUNER_SET_CONFIG _IOW('d', 92, struct v4l2_priv_tun_config)
/* Switch the tuner to a specific tuner mode. Replacement of AUDC_SET_RADIO */
#define VIDIOC_INT_S_TUNER_MODE _IOW('d', 93, enum v4l2_tuner_type)
Replacement of TUNER_SET_STANDBY. */
#define VIDIOC_INT_S_STANDBY _IOW('d', 94, u32)
-/* only implemented if CONFIG_VIDEO_ADV_DEBUG is defined */
-#define VIDIOC_INT_S_REGISTER _IOR ('d', 100, struct v4l2_register)
-#define VIDIOC_INT_G_REGISTER _IOWR('d', 101, struct v4l2_register)
+/* 100, 101 used by VIDIOC_DBG_[SG]_REGISTER */
-/* Reset the I2C chip */
-#define VIDIOC_INT_RESET _IO ('d', 102)
+/* Generic reset command. The argument selects which subsystems to reset.
+ Passing 0 will always reset the whole chip. */
+#define VIDIOC_INT_RESET _IOW ('d', 102, u32)
/* Set the frequency (in Hz) of the audio clock output.
Used to slave an audio processor to the video decoder, ensuring that audio
whether CC data from the first or second field should be obtained). */
#define VIDIOC_INT_G_VBI_DATA _IOWR('d', 106, struct v4l2_sliced_vbi_data)
-/* Returns the chip identifier or V4L2_IDENT_UNKNOWN if no identification can
- be made. */
-#define VIDIOC_INT_G_CHIP_IDENT _IOR ('d', 107, enum v4l2_chip_ident)
-
/* Sets I2S speed in bps. This is used to provide a standard way to select I2S
clock used by driving digital audio streams at some board designs.
Usual values for the frequency are 1024000 and 2048000.
If the frequency is not supported, then -EINVAL is returned. */
#define VIDIOC_INT_S_CRYSTAL_FREQ _IOW ('d', 113, struct v4l2_crystal_freq)
+/* Initialize the sensor registors to some sort of reasonable
+ default values. */
+#define VIDIOC_INT_INIT _IOW ('d', 114, u32)
+
+/* Set v4l2_std_id for video OUTPUT devices. This is ignored by
+ video input devices. */
+#define VIDIOC_INT_S_STD_OUTPUT _IOW ('d', 115, v4l2_std_id)
+
+/* Get v4l2_std_id for video OUTPUT devices. This is ignored by
+ video input devices. */
+#define VIDIOC_INT_G_STD_OUTPUT _IOW ('d', 116, v4l2_std_id)
+
#endif /* V4L2_COMMON_H_ */