const kernel_cap_t *effective,
const kernel_cap_t *inheritable,
const kernel_cap_t *permitted);
-extern int cap_bprm_set_security(struct linux_binprm *bprm);
-extern int cap_bprm_apply_creds(struct linux_binprm *bprm, int unsafe);
+extern int cap_bprm_set_creds(struct linux_binprm *bprm);
extern int cap_bprm_secureexec(struct linux_binprm *bprm);
extern int cap_inode_setxattr(struct dentry *dentry, const char *name,
const void *value, size_t size, int flags);
struct sched_param;
struct request_sock;
-/* bprm_apply_creds unsafe reasons */
+/* bprm->unsafe reasons */
#define LSM_UNSAFE_SHARE 1
#define LSM_UNSAFE_PTRACE 2
#define LSM_UNSAFE_PTRACE_CAP 4
*
* Security hooks for program execution operations.
*
- * @bprm_alloc_security:
- * Allocate and attach a security structure to the @bprm->security field.
- * The security field is initialized to NULL when the bprm structure is
- * allocated.
- * @bprm contains the linux_binprm structure to be modified.
- * Return 0 if operation was successful.
- * @bprm_free_security:
- * @bprm contains the linux_binprm structure to be modified.
- * Deallocate and clear the @bprm->security field.
- * @bprm_apply_creds:
- * Compute and set the security attributes of a process being transformed
- * by an execve operation based on the old attributes (current->security)
- * and the information saved in @bprm->security by the set_security hook.
- * Since this function may return an error, in which case the process will
- * be killed. However, it can leave the security attributes of the
- * process unchanged if an access failure occurs at this point.
- * bprm_apply_creds is called under task_lock. @unsafe indicates various
- * reasons why it may be unsafe to change security state.
- * @bprm contains the linux_binprm structure.
- * @bprm_post_apply_creds:
- * Runs after bprm_apply_creds with the task_lock dropped, so that
- * functions which cannot be called safely under the task_lock can
- * be used. This hook is a good place to perform state changes on
- * the process such as closing open file descriptors to which access
- * is no longer granted if the attributes were changed.
- * Note that a security module might need to save state between
- * bprm_apply_creds and bprm_post_apply_creds to store the decision
- * on whether the process may proceed.
- * @bprm contains the linux_binprm structure.
- * @bprm_set_security:
+ * @bprm_set_creds:
* Save security information in the bprm->security field, typically based
* on information about the bprm->file, for later use by the apply_creds
* hook. This hook may also optionally check permissions (e.g. for
* @bprm contains the linux_binprm structure.
* Return 0 if the hook is successful and permission is granted.
* @bprm_check_security:
- * This hook mediates the point when a search for a binary handler will
- * begin. It allows a check the @bprm->security value which is set in
- * the preceding set_security call. The primary difference from
- * set_security is that the argv list and envp list are reliably
- * available in @bprm. This hook may be called multiple times
- * during a single execve; and in each pass set_security is called
- * first.
+ * This hook mediates the point when a search for a binary handler will
+ * begin. It allows a check the @bprm->security value which is set in the
+ * preceding set_creds call. The primary difference from set_creds is
+ * that the argv list and envp list are reliably available in @bprm. This
+ * hook may be called multiple times during a single execve; and in each
+ * pass set_creds is called first.
* @bprm contains the linux_binprm structure.
* Return 0 if the hook is successful and permission is granted.
+ * @bprm_committing_creds:
+ * Prepare to install the new security attributes of a process being
+ * transformed by an execve operation, based on the old credentials
+ * pointed to by @current->cred and the information set in @bprm->cred by
+ * the bprm_set_creds hook. @bprm points to the linux_binprm structure.
+ * This hook is a good place to perform state changes on the process such
+ * as closing open file descriptors to which access will no longer be
+ * granted when the attributes are changed. This is called immediately
+ * before commit_creds().
+ * @bprm_committed_creds:
+ * Tidy up after the installation of the new security attributes of a
+ * process being transformed by an execve operation. The new credentials
+ * have, by this point, been set to @current->cred. @bprm points to the
+ * linux_binprm structure. This hook is a good place to perform state
+ * changes on the process such as clearing out non-inheritable signal
+ * state. This is called immediately after commit_creds().
* @bprm_secureexec:
* Return a boolean value (0 or 1) indicating whether a "secure exec"
* is required. The flag is passed in the auxiliary table
int (*settime) (struct timespec *ts, struct timezone *tz);
int (*vm_enough_memory) (struct mm_struct *mm, long pages);
- int (*bprm_alloc_security) (struct linux_binprm *bprm);
- void (*bprm_free_security) (struct linux_binprm *bprm);
- int (*bprm_apply_creds) (struct linux_binprm *bprm, int unsafe);
- void (*bprm_post_apply_creds) (struct linux_binprm *bprm);
- int (*bprm_set_security) (struct linux_binprm *bprm);
+ int (*bprm_set_creds) (struct linux_binprm *bprm);
int (*bprm_check_security) (struct linux_binprm *bprm);
int (*bprm_secureexec) (struct linux_binprm *bprm);
+ void (*bprm_committing_creds) (struct linux_binprm *bprm);
+ void (*bprm_committed_creds) (struct linux_binprm *bprm);
int (*sb_alloc_security) (struct super_block *sb);
void (*sb_free_security) (struct super_block *sb);
int security_vm_enough_memory(long pages);
int security_vm_enough_memory_mm(struct mm_struct *mm, long pages);
int security_vm_enough_memory_kern(long pages);
-int security_bprm_alloc(struct linux_binprm *bprm);
-void security_bprm_free(struct linux_binprm *bprm);
-int security_bprm_apply_creds(struct linux_binprm *bprm, int unsafe);
-void security_bprm_post_apply_creds(struct linux_binprm *bprm);
-int security_bprm_set(struct linux_binprm *bprm);
+int security_bprm_set_creds(struct linux_binprm *bprm);
int security_bprm_check(struct linux_binprm *bprm);
+void security_bprm_committing_creds(struct linux_binprm *bprm);
+void security_bprm_committed_creds(struct linux_binprm *bprm);
int security_bprm_secureexec(struct linux_binprm *bprm);
int security_sb_alloc(struct super_block *sb);
void security_sb_free(struct super_block *sb);
return cap_vm_enough_memory(mm, pages);
}
-static inline int security_bprm_alloc(struct linux_binprm *bprm)
-{
- return 0;
-}
-
-static inline void security_bprm_free(struct linux_binprm *bprm)
-{ }
-
-static inline int security_bprm_apply_creds(struct linux_binprm *bprm, int unsafe)
+static inline int security_bprm_set_creds(struct linux_binprm *bprm)
{
- return cap_bprm_apply_creds(bprm, unsafe);
+ return cap_bprm_set_creds(bprm);
}
-static inline void security_bprm_post_apply_creds(struct linux_binprm *bprm)
+static inline int security_bprm_check(struct linux_binprm *bprm)
{
- return;
+ return 0;
}
-static inline int security_bprm_set(struct linux_binprm *bprm)
+static inline void security_bprm_committing_creds(struct linux_binprm *bprm)
{
- return cap_bprm_set_security(bprm);
}
-static inline int security_bprm_check(struct linux_binprm *bprm)
+static inline void security_bprm_committed_creds(struct linux_binprm *bprm)
{
- return 0;
}
static inline int security_bprm_secureexec(struct linux_binprm *bprm)
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff