mfd: tmio_mmc hardware abstraction for CNF area
[safe/jmp/linux-2.6] / include / linux / mfd / tmio.h
index 6b9c5d0..9cb1834 100644 (file)
@@ -2,6 +2,8 @@
 #define MFD_TMIO_H
 
 #include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
 
 #define tmio_ioread8(addr) readb(addr)
 #define tmio_ioread16(addr) readw(addr)
        writew((val) >> 16, (addr) + 2); \
        } while (0)
 
+#define CNF_CMD     0x04
+#define CNF_CTL_BASE   0x10
+#define CNF_INT_PIN  0x3d
+#define CNF_STOP_CLK_CTL 0x40
+#define CNF_GCLK_CTL 0x41
+#define CNF_SD_CLK_MODE 0x42
+#define CNF_PIN_STATUS 0x44
+#define CNF_PWR_CTL_1 0x48
+#define CNF_PWR_CTL_2 0x49
+#define CNF_PWR_CTL_3 0x4a
+#define CNF_CARD_DETECT_MODE 0x4c
+#define CNF_SD_SLOT 0x50
+#define CNF_EXT_GCLK_CTL_1 0xf0
+#define CNF_EXT_GCLK_CTL_2 0xf1
+#define CNF_EXT_GCLK_CTL_3 0xf9
+#define CNF_SD_LED_EN_1 0xfa
+#define CNF_SD_LED_EN_2 0xfe
+
+#define   SDCREN 0x2   /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
+
+#define sd_config_write8(base, shift, reg, val) \
+       tmio_iowrite8((val), (base) + ((reg) << (shift)))
+#define sd_config_write16(base, shift, reg, val) \
+       tmio_iowrite16((val), (base) + ((reg) << (shift)))
+#define sd_config_write32(base, shift, reg, val) \
+       do { \
+               tmio_iowrite16((val), (base) + ((reg) << (shift)));   \
+               tmio_iowrite16((val) >> 16, (base) + ((reg + 2) << (shift))); \
+       } while (0)
+
+int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base);
+int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base);
+void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state);
+void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state);
+
 /*
  * data for the MMC controller
  */
 struct tmio_mmc_data {
        const unsigned int              hclk;
+       void (*set_pwr)(struct platform_device *host, int state);
+       void (*set_clk_div)(struct platform_device *host, int state);
 };
 
 /*