#define __LINUX_LIBATA_H__
#include <linux/delay.h>
+#include <linux/jiffies.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
/* note: prints function name for you */
#ifdef ATA_DEBUG
-#define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
#ifdef ATA_VERBOSE_DEBUG
-#define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
#else
#define VPRINTK(fmt, args...)
#endif /* ATA_VERBOSE_DEBUG */
#define VPRINTK(fmt, args...)
#endif /* ATA_DEBUG */
-#define BPRINTK(fmt, args...) if (ap->flags & ATA_FLAG_DEBUGMSG) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define BPRINTK(fmt, args...) if (ap->flags & ATA_FLAG_DEBUGMSG) printk(KERN_ERR "%s: " fmt, __func__, ## args)
/* NEW: debug levels */
#define HAVE_LIBATA_MSG 1
/* various global constants */
LIBATA_MAX_PRD = ATA_MAX_PRD / 2,
LIBATA_DUMB_MAX_PRD = ATA_MAX_PRD / 4, /* Worst case */
- ATA_MAX_PORTS = 8,
ATA_DEF_QUEUE = 1,
/* tag ATA_MAX_QUEUE - 1 is reserved for internal commands */
ATA_MAX_QUEUE = 32,
ATA_TAG_INTERNAL = ATA_MAX_QUEUE - 1,
- ATA_MAX_BUS = 2,
- ATA_DEF_BUSY_WAIT = 10000,
- ATA_SHORT_PAUSE = (HZ >> 6) + 1,
+ ATA_SHORT_PAUSE = 16,
ATAPI_MAX_DRAIN = 16 << 10,
ATA_DFLAG_PIO = (1 << 12), /* device limited to PIO mode */
ATA_DFLAG_NCQ_OFF = (1 << 13), /* device limited to non-NCQ mode */
- ATA_DFLAG_SPUNDOWN = (1 << 14), /* XXX: for spindown_compat */
ATA_DFLAG_SLEEPING = (1 << 15), /* device is sleeping */
ATA_DFLAG_DUBIOUS_XFER = (1 << 16), /* data transfer not verified */
+ ATA_DFLAG_NO_UNLOAD = (1 << 17), /* device doesn't support unload */
+ ATA_DFLAG_UNLOCK_HPA = (1 << 18), /* unlock HPA */
ATA_DFLAG_INIT_MASK = (1 << 24) - 1,
ATA_DFLAG_DETACH = (1 << 24),
ATA_DEV_NONE = 9, /* no device */
/* struct ata_link flags */
+ ATA_LFLAG_NO_HRST = (1 << 1), /* avoid hardreset */
ATA_LFLAG_NO_SRST = (1 << 2), /* avoid softreset */
ATA_LFLAG_ASSUME_ATA = (1 << 3), /* assume ATA class */
ATA_LFLAG_ASSUME_SEMB = (1 << 4), /* assume SEMB class */
ATA_LFLAG_ASSUME_CLASS = ATA_LFLAG_ASSUME_ATA | ATA_LFLAG_ASSUME_SEMB,
ATA_LFLAG_NO_RETRY = (1 << 5), /* don't retry this link */
ATA_LFLAG_DISABLED = (1 << 6), /* link is disabled */
+ ATA_LFLAG_SW_ACTIVITY = (1 << 7), /* keep activity stats */
/* struct ata_port flags */
ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */
ATA_FLAG_PIO_POLLING = (1 << 9), /* use polling PIO if LLD
* doesn't handle PIO interrupts */
ATA_FLAG_NCQ = (1 << 10), /* host supports NCQ */
+ ATA_FLAG_NO_POWEROFF_SPINDOWN = (1 << 11), /* don't spindown before poweroff */
+ ATA_FLAG_NO_HIBERNATE_SPINDOWN = (1 << 12), /* don't spindown before hibernation */
ATA_FLAG_DEBUGMSG = (1 << 13),
+ ATA_FLAG_FPDMA_AA = (1 << 14), /* driver supports Auto-Activate */
ATA_FLAG_IGN_SIMPLEX = (1 << 15), /* ignore SIMPLEX */
ATA_FLAG_NO_IORDY = (1 << 16), /* controller lacks iordy */
ATA_FLAG_ACPI_SATA = (1 << 17), /* need native SATA ACPI layout */
ATA_FLAG_AN = (1 << 18), /* controller supports AN */
ATA_FLAG_PMP = (1 << 19), /* controller supports PMP */
ATA_FLAG_IPM = (1 << 20), /* driver can handle IPM */
-
- /* The following flag belongs to ap->pflags but is kept in
- * ap->flags because it's referenced in many LLDs and will be
- * removed in not-too-distant future.
- */
- ATA_FLAG_DISABLED = (1 << 23), /* port is disabled, ignore it */
+ ATA_FLAG_EM = (1 << 21), /* driver supports enclosure
+ * management */
+ ATA_FLAG_SW_ACTIVITY = (1 << 22), /* driver supports sw activity
+ * led */
/* bits 24:31 of ap->flags are reserved for LLD specific flags */
+
/* struct ata_port pflags */
ATA_PFLAG_EH_PENDING = (1 << 0), /* EH pending */
ATA_PFLAG_EH_IN_PROGRESS = (1 << 1), /* EH in progress */
ATA_PFLAG_FROZEN = (1 << 2), /* port is frozen */
ATA_PFLAG_RECOVERED = (1 << 3), /* recovery action performed */
ATA_PFLAG_LOADING = (1 << 4), /* boot/loading probe */
- ATA_PFLAG_UNLOADING = (1 << 5), /* module is unloading */
ATA_PFLAG_SCSI_HOTPLUG = (1 << 6), /* SCSI hotplug scheduled */
ATA_PFLAG_INITIALIZING = (1 << 7), /* being initialized, don't touch */
ATA_PFLAG_RESETTING = (1 << 8), /* reset in progress */
+ ATA_PFLAG_UNLOADING = (1 << 9), /* driver is being unloaded */
+ ATA_PFLAG_UNLOADED = (1 << 10), /* driver is unloaded */
ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */
ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */
ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */
+ ATA_PFLAG_PIO32 = (1 << 20), /* 32bit PIO */
+ ATA_PFLAG_PIO32CHANGE = (1 << 21), /* 32bit PIO can be turned on/off */
+
/* struct ata_queued_cmd flags */
ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */
ATA_QCFLAG_DMAMAP = (1 << 1), /* SG table is DMA mapped */
/* host set flags */
ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host only */
ATA_HOST_STARTED = (1 << 1), /* Host started */
+ ATA_HOST_PARALLEL_SCAN = (1 << 2), /* Ports on this host can be scanned in parallel */
/* bits 24:31 of host->flags are reserved for LLD specific flags */
/* various lengths of time */
- ATA_TMOUT_BOOT = 30 * HZ, /* heuristic */
- ATA_TMOUT_BOOT_QUICK = 7 * HZ, /* heuristic */
- ATA_TMOUT_INTERNAL = 30 * HZ,
- ATA_TMOUT_INTERNAL_QUICK = 5 * HZ,
-
- /* FIXME: GoVault needs 2s but we can't afford that without
- * parallel probing. 800ms is enough for iVDR disk
- * HHD424020F7SV00. Increase to 2secs when parallel probing
- * is in place.
+ ATA_TMOUT_BOOT = 30000, /* heuristic */
+ ATA_TMOUT_BOOT_QUICK = 7000, /* heuristic */
+ ATA_TMOUT_INTERNAL_QUICK = 5000,
+ ATA_TMOUT_MAX_PARK = 30000,
+
+ /*
+ * GoVault needs 2s and iVDR disk HHD424020F7SV00 800ms. 2s
+ * is too much without parallel probing. Use 2s if parallel
+ * probing is available, 800ms otherwise.
*/
- ATA_TMOUT_FF_WAIT = 4 * HZ / 5,
+ ATA_TMOUT_FF_WAIT_LONG = 2000,
+ ATA_TMOUT_FF_WAIT = 800,
/* Spec mandates to wait for ">= 2ms" before checking status
* after reset. We wait 150ms, because that was the magic
*
* Old drivers/ide uses the 2mS rule and then waits for ready.
*/
- ATA_WAIT_AFTER_RESET_MSECS = 150,
+ ATA_WAIT_AFTER_RESET = 150,
/* If PMP is supported, we have to do follow-up SRST. As some
* PMPs don't send D2H Reg FIS after hardreset, LLDs are
* advised to wait only for the following duration before
* doing SRST.
*/
- ATA_TMOUT_PMP_SRST_WAIT = 1 * HZ,
+ ATA_TMOUT_PMP_SRST_WAIT = 5000,
/* ATA bus states */
BUS_UNKNOWN = 0,
ATA_EH_RESET = ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
ATA_EH_ENABLE_LINK = (1 << 3),
ATA_EH_LPM = (1 << 4), /* link power management action */
+ ATA_EH_PARK = (1 << 5), /* unload heads and stop I/O */
- ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE,
+ ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE | ATA_EH_PARK,
+ ATA_EH_ALL_ACTIONS = ATA_EH_REVALIDATE | ATA_EH_RESET |
+ ATA_EH_ENABLE_LINK | ATA_EH_LPM,
/* ata_eh_info->flags */
ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */
ATA_EHI_DID_RESET = ATA_EHI_DID_SOFTRESET | ATA_EHI_DID_HARDRESET,
+ /* mask of flags to transfer *to* the slave link */
+ ATA_EHI_TO_SLAVE_MASK = ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET,
+
/* max tries if error condition is still set after ->error_handler */
ATA_EH_MAX_TRIES = 5,
+ /* sometimes resuming a link requires several retries */
+ ATA_LINK_RESUME_TRIES = 5,
+
/* how hard are we gonna try to probe/recover devices */
ATA_PROBE_MAX_TRIES = 3,
ATA_EH_DEV_TRIES = 3,
ATA_EH_PMP_TRIES = 5,
ATA_EH_PMP_LINK_TRIES = 3,
- SATA_PMP_SCR_TIMEOUT = 250,
+ SATA_PMP_RW_TIMEOUT = 3000, /* PMP read/write timeout */
+
+ /* This should match the actual table size of
+ * ata_eh_cmd_timeout_table in libata-eh.c.
+ */
+ ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 6,
/* Horkage types. May be set by libata or controller on drives
(some horkage may be drive/controller pair dependant */
ATA_HORKAGE_NONCQ = (1 << 2), /* Don't use NCQ */
ATA_HORKAGE_MAX_SEC_128 = (1 << 3), /* Limit max sects to 128 */
ATA_HORKAGE_BROKEN_HPA = (1 << 4), /* Broken HPA */
- ATA_HORKAGE_SKIP_PM = (1 << 5), /* Skip PM operations */
+ ATA_HORKAGE_DISABLE = (1 << 5), /* Disable it */
ATA_HORKAGE_HPA_SIZE = (1 << 6), /* native size off by one */
ATA_HORKAGE_IPM = (1 << 7), /* Link PM problems */
ATA_HORKAGE_IVB = (1 << 8), /* cbl det validity bit bugs */
ATA_HORKAGE_STUCK_ERR = (1 << 9), /* stuck ERR on next PACKET */
+ ATA_HORKAGE_BRIDGE_OK = (1 << 10), /* no bridge limits */
+ ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands
+ not multiple of 16 bytes */
+ ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firmware update warning */
+ ATA_HORKAGE_1_5_GBPS = (1 << 13), /* force 1.5 Gbps */
+ ATA_HORKAGE_NOSETXFER = (1 << 14), /* skip SETXFER, SATA only */
+ ATA_HORKAGE_BROKEN_FPDMA_AA = (1 << 15), /* skip AA */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
ATA_TIMING_CYC8B,
ATA_TIMING_ACTIVE = (1 << 4),
ATA_TIMING_RECOVER = (1 << 5),
- ATA_TIMING_CYCLE = (1 << 6),
- ATA_TIMING_UDMA = (1 << 7),
+ ATA_TIMING_DMACK_HOLD = (1 << 6),
+ ATA_TIMING_CYCLE = (1 << 7),
+ ATA_TIMING_UDMA = (1 << 8),
ATA_TIMING_ALL = ATA_TIMING_SETUP | ATA_TIMING_ACT8B |
ATA_TIMING_REC8B | ATA_TIMING_CYC8B |
ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER |
- ATA_TIMING_CYCLE | ATA_TIMING_UDMA,
+ ATA_TIMING_DMACK_HOLD | ATA_TIMING_CYCLE |
+ ATA_TIMING_UDMA,
+
+ /* ACPI constants */
+ ATA_ACPI_FILTER_SETXFER = 1 << 0,
+ ATA_ACPI_FILTER_LOCK = 1 << 1,
+ ATA_ACPI_FILTER_DIPM = 1 << 2,
+ ATA_ACPI_FILTER_FPDMA_OFFSET = 1 << 3, /* FPDMA non-zero offset */
+ ATA_ACPI_FILTER_FPDMA_AA = 1 << 4, /* FPDMA auto activate */
+
+ ATA_ACPI_FILTER_DEFAULT = ATA_ACPI_FILTER_SETXFER |
+ ATA_ACPI_FILTER_LOCK |
+ ATA_ACPI_FILTER_DIPM,
};
enum ata_xfer_mask {
MAX_PERFORMANCE,
MEDIUM_POWER,
};
-extern struct class_device_attribute class_device_attr_link_power_management_policy;
+extern struct device_attribute dev_attr_link_power_management_policy;
+extern struct device_attribute dev_attr_unload_heads;
+extern struct device_attribute dev_attr_em_message_type;
+extern struct device_attribute dev_attr_em_message;
+extern struct device_attribute dev_attr_sw_activity;
+
+enum sw_activity {
+ OFF,
+ BLINK_ON,
+ BLINK_OFF,
+};
+#ifdef CONFIG_ATA_SFF
struct ata_ioports {
void __iomem *cmd_addr;
void __iomem *data_addr;
void __iomem *bmdma_addr;
void __iomem *scr_addr;
};
+#endif /* CONFIG_ATA_SFF */
struct ata_host {
spinlock_t lock;
unsigned long flags; /* ATA_QCFLAG_xxx */
unsigned int tag;
unsigned int n_elem;
+ unsigned int orig_n_elem;
int dma_dir;
struct ata_device {
struct ata_link *link;
unsigned int devno; /* 0 or 1 */
- unsigned long flags; /* ATA_DFLAG_xxx */
unsigned int horkage; /* List of broken features */
+ unsigned long flags; /* ATA_DFLAG_xxx */
struct scsi_device *sdev; /* attached SCSI device */
+ void *private_data;
#ifdef CONFIG_ATA_ACPI
acpi_handle acpi_handle;
union acpi_object *gtf_cache;
+ unsigned int gtf_filter;
#endif
- /* n_sector is used as CLEAR_OFFSET, read comment above CLEAR_OFFSET */
+ /* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */
u64 n_sectors; /* size of device, if ATA */
+ u64 n_native_sectors; /* native size, if ATA */
unsigned int class; /* ATA_DEV_xxx */
-
- union {
- u16 id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */
- u32 gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */
- };
+ unsigned long unpark_deadline;
u8 pio_mode;
u8 dma_mode;
u16 heads; /* Number of heads */
u16 sectors; /* Number of sectors per track */
+ union {
+ u16 id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */
+ u32 gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */
+ };
+
/* error history */
- struct ata_ering ering;
int spdn_cnt;
+ /* ering is CLEAR_END, read comment above CLEAR_END */
+ struct ata_ering ering;
};
-/* Offset into struct ata_device. Fields above it are maintained
- * acress device init. Fields below are zeroed.
+/* Fields between ATA_DEVICE_CLEAR_BEGIN and ATA_DEVICE_CLEAR_END are
+ * cleared to zero on ata_dev_init().
*/
-#define ATA_DEVICE_CLEAR_OFFSET offsetof(struct ata_device, n_sectors)
+#define ATA_DEVICE_CLEAR_BEGIN offsetof(struct ata_device, n_sectors)
+#define ATA_DEVICE_CLEAR_END offsetof(struct ata_device, ering)
struct ata_eh_info {
struct ata_device *dev; /* offending device */
struct ata_eh_context {
struct ata_eh_info i;
int tries[ATA_MAX_DEVICES];
+ int cmd_timeout_idx[ATA_MAX_DEVICES]
+ [ATA_EH_CMD_TIMEOUT_TABLE_SIZE];
unsigned int classes[ATA_MAX_DEVICES];
unsigned int did_probe_mask;
+ unsigned int unloaded_mask;
unsigned int saved_ncq_enabled;
u8 saved_xfer_mode[ATA_MAX_DEVICES];
+ /* timestamp for the last reset attempt or success */
+ unsigned long last_reset;
};
struct ata_acpi_drive
unsigned int flags; /* ATA_LFLAG_xxx */
+ u32 saved_scontrol; /* SControl on probe */
unsigned int hw_sata_spd_limit;
unsigned int sata_spd_limit;
unsigned int sata_spd; /* current SATA PHY speed */
struct Scsi_Host *scsi_host; /* our co-allocated scsi host */
struct ata_port_operations *ops;
spinlock_t *lock;
+ /* Flags owned by the EH context. Only EH should touch these once the
+ port is active */
unsigned long flags; /* ATA_FLAG_xxx */
+ /* Flags that change dynamically, protected by ap->lock */
unsigned int pflags; /* ATA_PFLAG_xxx */
unsigned int print_id; /* user visible unique port ID */
unsigned int port_no; /* 0 based port no. inside the host */
- struct ata_prd *prd; /* our SG list */
- dma_addr_t prd_dma; /* and its DMA mapping */
-
+#ifdef CONFIG_ATA_SFF
struct ata_ioports ioaddr; /* ATA cmd/ctl/dma register blocks */
-
u8 ctl; /* cache of ATA control register */
u8 last_ctl; /* Cache last written value */
+ struct delayed_work sff_pio_task;
+ struct ata_bmdma_prd *bmdma_prd; /* BMDMA SG list */
+ dma_addr_t bmdma_prd_dma; /* and its DMA mapping */
+#endif /* CONFIG_ATA_SFF */
+
unsigned int pio_mask;
unsigned int mwdma_mask;
unsigned int udma_mask;
unsigned int qc_active;
int nr_active_links; /* #links with active qcs */
- struct ata_link link; /* host default link */
+ struct ata_link link; /* host default link */
+ struct ata_link *slave_link; /* see ata_slave_link_init() */
int nr_pmp_links; /* nr of available PMP links */
struct ata_link *pmp_link; /* array of PMP links */
struct ata_host *host;
struct device *dev;
- void *port_task_data;
- struct delayed_work port_task;
struct delayed_work hotplug_task;
struct work_struct scsi_rescan_task;
struct list_head eh_done_q;
wait_queue_head_t eh_wait_q;
int eh_tries;
+ struct completion park_req_pending;
pm_message_t pm_mesg;
int *pm_result;
struct timer_list fastdrain_timer;
unsigned long fastdrain_cnt;
+ int em_message_type;
void *private_data;
#ifdef CONFIG_ATA_ACPI
acpi_handle acpi_handle;
struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */
#endif
- u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */
+ /* owned by EH */
+ u8 sector_buf[ATA_SECT_SIZE] ____cacheline_aligned;
};
/* The following initializer overrides a method to NULL whether one of
void (*set_piomode)(struct ata_port *ap, struct ata_device *dev);
void (*set_dmamode)(struct ata_port *ap, struct ata_device *dev);
int (*set_mode)(struct ata_link *link, struct ata_device **r_failed_dev);
+ unsigned int (*read_id)(struct ata_device *dev, struct ata_taskfile *tf, u16 *id);
void (*dev_config)(struct ata_device *dev);
ata_reset_fn_t pmp_hardreset;
ata_postreset_fn_t pmp_postreset;
void (*error_handler)(struct ata_port *ap);
+ void (*lost_interrupt)(struct ata_port *ap);
void (*post_internal_cmd)(struct ata_queued_cmd *qc);
/*
* Optional features
*/
- int (*scr_read)(struct ata_port *ap, unsigned int sc_reg, u32 *val);
- int (*scr_write)(struct ata_port *ap, unsigned int sc_reg, u32 val);
+ int (*scr_read)(struct ata_link *link, unsigned int sc_reg, u32 *val);
+ int (*scr_write)(struct ata_link *link, unsigned int sc_reg, u32 val);
void (*pmp_attach)(struct ata_port *ap);
void (*pmp_detach)(struct ata_port *ap);
int (*enable_pm)(struct ata_port *ap, enum link_pm policy);
void (*port_stop)(struct ata_port *ap);
void (*host_stop)(struct ata_host *host);
+#ifdef CONFIG_ATA_SFF
/*
* SFF / taskfile oriented ops
*/
void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
+ void (*sff_set_devctl)(struct ata_port *ap, u8 ctl);
u8 (*sff_check_status)(struct ata_port *ap);
u8 (*sff_check_altstatus)(struct ata_port *ap);
void (*sff_tf_load)(struct ata_port *ap, const struct ata_taskfile *tf);
const struct ata_taskfile *tf);
unsigned int (*sff_data_xfer)(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw);
- u8 (*sff_irq_on)(struct ata_port *);
+ void (*sff_irq_on)(struct ata_port *);
+ bool (*sff_irq_check)(struct ata_port *);
void (*sff_irq_clear)(struct ata_port *);
+ void (*sff_drain_fifo)(struct ata_queued_cmd *qc);
void (*bmdma_setup)(struct ata_queued_cmd *qc);
void (*bmdma_start)(struct ata_queued_cmd *qc);
void (*bmdma_stop)(struct ata_queued_cmd *qc);
u8 (*bmdma_status)(struct ata_port *ap);
-
+#endif /* CONFIG_ATA_SFF */
+
+ ssize_t (*em_show)(struct ata_port *ap, char *buf);
+ ssize_t (*em_store)(struct ata_port *ap, const char *message,
+ size_t size);
+ ssize_t (*sw_activity_show)(struct ata_device *dev, char *buf);
+ ssize_t (*sw_activity_store)(struct ata_device *dev,
+ enum sw_activity val);
/*
* Obsolete
*/
unsigned short cyc8b; /* t0 for 8-bit I/O */
unsigned short active; /* t2 or tD */
unsigned short recover; /* t2i or tK */
+ unsigned short dmack_hold; /* tj */
unsigned short cycle; /* t0 */
unsigned short udma; /* t2CYCTYP/2 */
};
-#define FIT(v, vmin, vmax) max_t(short, min_t(short, v, vmax), vmin)
-
/*
* Core layer - drivers/ata/libata-core.c
*/
return ap->ops == &ata_dummy_port_ops;
}
-extern void sata_print_link_status(struct ata_link *link);
-extern void ata_port_probe(struct ata_port *);
extern int sata_set_spd(struct ata_link *link);
extern int ata_std_prereset(struct ata_link *link, unsigned long deadline);
extern int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
extern int sata_std_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
extern void ata_std_postreset(struct ata_link *link, unsigned int *classes);
-extern void ata_port_disable(struct ata_port *);
extern struct ata_host *ata_host_alloc(struct device *dev, int max_ports);
extern struct ata_host *ata_host_alloc_pinfo(struct device *dev,
const struct ata_port_info * const * ppi, int n_ports);
+extern int ata_slave_link_init(struct ata_port *ap);
extern int ata_host_start(struct ata_host *host);
extern int ata_host_register(struct ata_host *host,
struct scsi_host_template *sht);
extern int ata_scsi_detect(struct scsi_host_template *sht);
extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *));
+extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev,
+ int cmd, void __user *arg);
extern void ata_sas_port_destroy(struct ata_port *);
extern struct ata_port *ata_sas_port_alloc(struct ata_host *,
struct ata_port_info *, struct Scsi_Host *);
extern int sata_scr_read(struct ata_link *link, int reg, u32 *val);
extern int sata_scr_write(struct ata_link *link, int reg, u32 val);
extern int sata_scr_write_flush(struct ata_link *link, int reg, u32 val);
-extern int ata_link_online(struct ata_link *link);
-extern int ata_link_offline(struct ata_link *link);
+extern bool ata_link_online(struct ata_link *link);
+extern bool ata_link_offline(struct ata_link *link);
#ifdef CONFIG_PM
extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg);
extern void ata_host_resume(struct ata_host *host);
#endif
extern int ata_ratelimit(void);
extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
- unsigned long interval_msec,
- unsigned long timeout_msec);
+ unsigned long interval, unsigned long timeout);
extern int atapi_cmd_type(u8 opcode);
extern void ata_tf_to_fis(const struct ata_taskfile *tf,
u8 pmp, int is_cmd, u8 *fis);
extern int ata_xfer_mode2shift(unsigned long xfer_mode);
extern const char *ata_mode_string(unsigned long xfer_mask);
extern unsigned long ata_id_xfermask(const u16 *id);
-extern void ata_noop_dev_select(struct ata_port *ap, unsigned int device);
-extern int ata_port_start(struct ata_port *ap);
extern int ata_std_qc_defer(struct ata_queued_cmd *qc);
extern void ata_noop_qc_prep(struct ata_queued_cmd *qc);
extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
unsigned int ofs, unsigned int len);
extern void ata_id_c_string(const u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len);
+extern unsigned int ata_do_dev_read_id(struct ata_device *dev,
+ struct ata_taskfile *tf, u16 *id);
extern void ata_qc_complete(struct ata_queued_cmd *qc);
extern int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active);
extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd,
extern int ata_scsi_slave_config(struct scsi_device *sdev);
extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
- int queue_depth);
+ int queue_depth, int reason);
extern struct ata_device *ata_dev_pair(struct ata_device *adev);
extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev);
#endif
/*
- * PMP - drivers/ata/libata-pmp.c
- */
-extern int sata_pmp_qc_defer_cmd_switch(struct ata_queued_cmd *qc);
-extern void sata_pmp_error_handler(struct ata_port *ap);
-
-/*
* EH - drivers/ata/libata-eh.c
*/
extern void ata_port_schedule_eh(struct ata_port *ap);
extern void ata_eh_qc_complete(struct ata_queued_cmd *qc);
extern void ata_eh_qc_retry(struct ata_queued_cmd *qc);
+extern void ata_eh_analyze_ncq_error(struct ata_link *link);
extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
*/
extern const struct ata_port_operations ata_base_port_ops;
extern const struct ata_port_operations sata_port_ops;
-extern const struct ata_port_operations sata_pmp_port_ops;
+extern struct device_attribute *ata_common_sdev_attrs[];
#define ATA_BASE_SHT(drv_name) \
.module = THIS_MODULE, \
.proc_name = drv_name, \
.slave_configure = ata_scsi_slave_config, \
.slave_destroy = ata_scsi_slave_destroy, \
- .bios_param = ata_std_bios_param
+ .bios_param = ata_std_bios_param, \
+ .sdev_attrs = ata_common_sdev_attrs
#define ATA_NCQ_SHT(drv_name) \
ATA_BASE_SHT(drv_name), \
.change_queue_depth = ata_scsi_change_queue_depth
/*
+ * PMP helpers
+ */
+#ifdef CONFIG_SATA_PMP
+static inline bool sata_pmp_supported(struct ata_port *ap)
+{
+ return ap->flags & ATA_FLAG_PMP;
+}
+
+static inline bool sata_pmp_attached(struct ata_port *ap)
+{
+ return ap->nr_pmp_links != 0;
+}
+
+static inline int ata_is_host_link(const struct ata_link *link)
+{
+ return link == &link->ap->link || link == link->ap->slave_link;
+}
+#else /* CONFIG_SATA_PMP */
+static inline bool sata_pmp_supported(struct ata_port *ap)
+{
+ return false;
+}
+
+static inline bool sata_pmp_attached(struct ata_port *ap)
+{
+ return false;
+}
+
+static inline int ata_is_host_link(const struct ata_link *link)
+{
+ return 1;
+}
+#endif /* CONFIG_SATA_PMP */
+
+static inline int sata_srst_pmp(struct ata_link *link)
+{
+ if (sata_pmp_supported(link->ap) && ata_is_host_link(link))
+ return SATA_PMP_CTRL_PORT;
+ return link->pmp;
+}
+
+/*
* printk helpers
*/
#define ata_port_printk(ap, lv, fmt, args...) \
printk("%sata%u: "fmt, lv, (ap)->print_id , ##args)
#define ata_link_printk(link, lv, fmt, args...) do { \
- if ((link)->ap->nr_pmp_links) \
+ if (sata_pmp_attached((link)->ap) || (link)->ap->slave_link) \
printk("%sata%u.%02u: "fmt, lv, (link)->ap->print_id, \
(link)->pmp , ##args); \
else \
/*
* link helpers
*/
-static inline int ata_is_host_link(const struct ata_link *link)
-{
- return link == &link->ap->link;
-}
-
static inline int ata_link_max_devices(const struct ata_link *link)
{
if (ata_is_host_link(link) && link->ap->flags & ATA_FLAG_SLAVE_POSS)
return ata_tag_valid(link->active_tag) || link->sactive;
}
-static inline struct ata_link *ata_port_first_link(struct ata_port *ap)
-{
- if (ap->nr_pmp_links)
- return ap->pmp_link;
- return &ap->link;
-}
-
-static inline struct ata_link *ata_port_next_link(struct ata_link *link)
-{
- struct ata_port *ap = link->ap;
-
- if (link == &ap->link) {
- if (!ap->nr_pmp_links)
- return NULL;
- return ap->pmp_link;
- }
+/*
+ * Iterators
+ *
+ * ATA_LITER_* constants are used to select link iteration mode and
+ * ATA_DITER_* device iteration mode.
+ *
+ * For a custom iteration directly using ata_{link|dev}_next(), if
+ * @link or @dev, respectively, is NULL, the first element is
+ * returned. @dev and @link can be any valid device or link and the
+ * next element according to the iteration mode will be returned.
+ * After the last element, NULL is returned.
+ */
+enum ata_link_iter_mode {
+ ATA_LITER_EDGE, /* if present, PMP links only; otherwise,
+ * host link. no slave link */
+ ATA_LITER_HOST_FIRST, /* host link followed by PMP or slave links */
+ ATA_LITER_PMP_FIRST, /* PMP links followed by host link,
+ * slave link still comes after host link */
+};
- if (++link < ap->nr_pmp_links + ap->pmp_link)
- return link;
- return NULL;
-}
+enum ata_dev_iter_mode {
+ ATA_DITER_ENABLED,
+ ATA_DITER_ENABLED_REVERSE,
+ ATA_DITER_ALL,
+ ATA_DITER_ALL_REVERSE,
+};
-#define __ata_port_for_each_link(lk, ap) \
- for ((lk) = &(ap)->link; (lk); (lk) = ata_port_next_link(lk))
+extern struct ata_link *ata_link_next(struct ata_link *link,
+ struct ata_port *ap,
+ enum ata_link_iter_mode mode);
-#define ata_port_for_each_link(link, ap) \
- for ((link) = ata_port_first_link(ap); (link); \
- (link) = ata_port_next_link(link))
+extern struct ata_device *ata_dev_next(struct ata_device *dev,
+ struct ata_link *link,
+ enum ata_dev_iter_mode mode);
-#define ata_link_for_each_dev(dev, link) \
- for ((dev) = (link)->device; \
- (dev) < (link)->device + ata_link_max_devices(link) || ((dev) = NULL); \
- (dev)++)
+/*
+ * Shortcut notation for iterations
+ *
+ * ata_for_each_link() iterates over each link of @ap according to
+ * @mode. @link points to the current link in the loop. @link is
+ * NULL after loop termination. ata_for_each_dev() works the same way
+ * except that it iterates over each device of @link.
+ *
+ * Note that the mode prefixes ATA_{L|D}ITER_ shouldn't need to be
+ * specified when using the following shorthand notations. Only the
+ * mode itself (EDGE, HOST_FIRST, ENABLED, etc...) should be
+ * specified. This not only increases brevity but also makes it
+ * impossible to use ATA_LITER_* for device iteration or vice-versa.
+ */
+#define ata_for_each_link(link, ap, mode) \
+ for ((link) = ata_link_next(NULL, (ap), ATA_LITER_##mode); (link); \
+ (link) = ata_link_next((link), (ap), ATA_LITER_##mode))
-#define ata_link_for_each_dev_reverse(dev, link) \
- for ((dev) = (link)->device + ata_link_max_devices(link) - 1; \
- (dev) >= (link)->device || ((dev) = NULL); (dev)--)
+#define ata_for_each_dev(dev, link, mode) \
+ for ((dev) = ata_dev_next(NULL, (link), ATA_DITER_##mode); (dev); \
+ (dev) = ata_dev_next((dev), (link), ATA_DITER_##mode))
/**
* ata_ncq_enabled - Test whether NCQ is enabled
{
memset(tf, 0, sizeof(*tf));
+#ifdef CONFIG_ATA_SFF
tf->ctl = dev->link->ap->ctl;
+#else
+ tf->ctl = ATA_DEVCTL_OBS;
+#endif
if (dev->devno == 0)
tf->device = ATA_DEVICE_OBS;
else
return *(struct ata_port **)&host->hostdata[0];
}
+static inline int ata_check_ready(u8 status)
+{
+ if (!(status & ATA_BUSY))
+ return 1;
+
+ /* 0xff indicates either no device or device not ready */
+ if (status == 0xff)
+ return -ENODEV;
+
+ return 0;
+}
+
+static inline unsigned long ata_deadline(unsigned long from_jiffies,
+ unsigned long timeout_msecs)
+{
+ return from_jiffies + msecs_to_jiffies(timeout_msecs);
+}
+
+/* Don't open code these in drivers as there are traps. Firstly the range may
+ change in future hardware and specs, secondly 0xFF means 'no DMA' but is
+ > UDMA_0. Dyma ddreigiau */
+
+static inline int ata_using_mwdma(struct ata_device *adev)
+{
+ if (adev->dma_mode >= XFER_MW_DMA_0 && adev->dma_mode <= XFER_MW_DMA_4)
+ return 1;
+ return 0;
+}
+
+static inline int ata_using_udma(struct ata_device *adev)
+{
+ if (adev->dma_mode >= XFER_UDMA_0 && adev->dma_mode <= XFER_UDMA_7)
+ return 1;
+ return 0;
+}
+
+static inline int ata_dma_enabled(struct ata_device *adev)
+{
+ return (adev->dma_mode == 0xFF ? 0 : 1);
+}
+
+/**************************************************************************
+ * PMP - drivers/ata/libata-pmp.c
+ */
+#ifdef CONFIG_SATA_PMP
+
+extern const struct ata_port_operations sata_pmp_port_ops;
+
+extern int sata_pmp_qc_defer_cmd_switch(struct ata_queued_cmd *qc);
+extern void sata_pmp_error_handler(struct ata_port *ap);
+
+#else /* CONFIG_SATA_PMP */
+
+#define sata_pmp_port_ops sata_port_ops
+#define sata_pmp_qc_defer_cmd_switch ata_std_qc_defer
+#define sata_pmp_error_handler ata_std_error_handler
+
+#endif /* CONFIG_SATA_PMP */
+
+
/**************************************************************************
* SFF - drivers/ata/libata-sff.c
*/
+#ifdef CONFIG_ATA_SFF
+
extern const struct ata_port_operations ata_sff_port_ops;
extern const struct ata_port_operations ata_bmdma_port_ops;
+extern const struct ata_port_operations ata_bmdma32_port_ops;
/* PIO only, sg_tablesize and dma_boundary limits can be removed */
#define ATA_PIO_SHT(drv_name) \
.sg_tablesize = LIBATA_MAX_PRD, \
.dma_boundary = ATA_DMA_BOUNDARY
-extern void ata_sff_qc_prep(struct ata_queued_cmd *qc);
-extern void ata_sff_dumb_qc_prep(struct ata_queued_cmd *qc);
extern void ata_sff_dev_select(struct ata_port *ap, unsigned int device);
extern u8 ata_sff_check_status(struct ata_port *ap);
-extern u8 ata_sff_altstatus(struct ata_port *ap);
+extern void ata_sff_pause(struct ata_port *ap);
+extern void ata_sff_dma_pause(struct ata_port *ap);
extern int ata_sff_busy_sleep(struct ata_port *ap,
unsigned long timeout_pat, unsigned long timeout);
extern int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline);
const struct ata_taskfile *tf);
extern unsigned int ata_sff_data_xfer(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw);
+extern unsigned int ata_sff_data_xfer32(struct ata_device *dev,
+ unsigned char *buf, unsigned int buflen, int rw);
extern unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw);
-extern u8 ata_sff_irq_on(struct ata_port *ap);
+extern void ata_sff_irq_on(struct ata_port *ap);
extern void ata_sff_irq_clear(struct ata_port *ap);
extern int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
u8 status, int in_wq);
+extern void ata_sff_queue_pio_task(struct ata_port *ap, unsigned long delay);
extern unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc);
extern bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc);
-extern unsigned int ata_sff_host_intr(struct ata_port *ap,
+extern unsigned int ata_sff_port_intr(struct ata_port *ap,
struct ata_queued_cmd *qc);
extern irqreturn_t ata_sff_interrupt(int irq, void *dev_instance);
+extern void ata_sff_lost_interrupt(struct ata_port *ap);
extern void ata_sff_freeze(struct ata_port *ap);
extern void ata_sff_thaw(struct ata_port *ap);
extern int ata_sff_prereset(struct ata_link *link, unsigned long deadline);
extern int sata_sff_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
extern void ata_sff_postreset(struct ata_link *link, unsigned int *classes);
+extern void ata_sff_drain_fifo(struct ata_queued_cmd *qc);
extern void ata_sff_error_handler(struct ata_port *ap);
-extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc);
-extern int ata_sff_port_start(struct ata_port *ap);
extern void ata_sff_std_ports(struct ata_ioports *ioaddr);
-extern unsigned long ata_bmdma_mode_filter(struct ata_device *dev,
- unsigned long xfer_mask);
-extern void ata_bmdma_setup(struct ata_queued_cmd *qc);
-extern void ata_bmdma_start(struct ata_queued_cmd *qc);
-extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
-extern u8 ata_bmdma_status(struct ata_port *ap);
-extern void ata_bus_reset(struct ata_port *ap);
-
#ifdef CONFIG_PCI
-extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
-extern int ata_pci_bmdma_init(struct ata_host *host);
extern int ata_pci_sff_init_host(struct ata_host *host);
extern int ata_pci_sff_prepare_host(struct pci_dev *pdev,
const struct ata_port_info * const * ppi,
irq_handler_t irq_handler,
struct scsi_host_template *sht);
extern int ata_pci_sff_init_one(struct pci_dev *pdev,
- const struct ata_port_info * const * ppi,
- struct scsi_host_template *sht, void *host_priv);
+ const struct ata_port_info * const * ppi,
+ struct scsi_host_template *sht, void *host_priv, int hflags);
#endif /* CONFIG_PCI */
-/**
- * ata_sff_pause - Flush writes and pause 400 nanoseconds.
- * @ap: Port to wait for.
- *
- * LOCKING:
- * Inherited from caller.
- */
-static inline void ata_sff_pause(struct ata_port *ap)
-{
- ata_sff_altstatus(ap);
- ndelay(400);
-}
+extern void ata_bmdma_qc_prep(struct ata_queued_cmd *qc);
+extern unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc);
+extern void ata_bmdma_dumb_qc_prep(struct ata_queued_cmd *qc);
+extern unsigned int ata_bmdma_port_intr(struct ata_port *ap,
+ struct ata_queued_cmd *qc);
+extern irqreturn_t ata_bmdma_interrupt(int irq, void *dev_instance);
+extern void ata_bmdma_error_handler(struct ata_port *ap);
+extern void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc);
+extern void ata_bmdma_irq_clear(struct ata_port *ap);
+extern void ata_bmdma_setup(struct ata_queued_cmd *qc);
+extern void ata_bmdma_start(struct ata_queued_cmd *qc);
+extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
+extern u8 ata_bmdma_status(struct ata_port *ap);
+extern int ata_bmdma_port_start(struct ata_port *ap);
+extern int ata_bmdma_port_start32(struct ata_port *ap);
+
+#ifdef CONFIG_PCI
+extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
+extern void ata_pci_bmdma_init(struct ata_host *host);
+#endif /* CONFIG_PCI */
/**
* ata_sff_busy_wait - Wait for a port status register
return status;
}
+#endif /* CONFIG_ATA_SFF */
#endif /* __LINUX_LIBATA_H__ */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff